Skip to content
Please enter a keyword to search

  • ISO 5725-3:1994

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  28-06-2023

    Language(s): 

    Published date:  22-12-1994

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    Specifies four intermediate measures due to changes in observation conditions (time, calibration, operator and equipment) within a laboratory. These intermediate measures can be established by an experiment within a specific laboratory or by an interlaboratory experiment. Furthermore, discusses the implications of the definitions of intermediate precision measures, presents guidance on the interpretation and application of the estimates of intermediate precision measures in practical situations, discusses the connections between trueness and measurement conditions.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 69/SC 6
    Development Note Along with ISO 5725-1, ISO 5725-2, ISO 5725-4, ISO 5725-5 and ISO 5725-6, it supersedes ISO 5725. (04/2001) Supersedes NEN ISO 5725. (01/2003)
    Document Type Standard
    Product Note this standard also refers iso guide 33:1989,iso 3534-3:1985
    Publisher International Organization for Standardization
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    DD CEN/TS 15916-1:2011 Copper and copper alloys. Determination of tellurium content Low tellurium content. Flame atomic absorption spectrometric method (FAAS)
    BS EN 15915:2010 Copper and copper alloys. Determination of silver content. Flame atomic absorption spectrometric method (FAAS)
    ISO 17053:2005 Steel and iron Determination of oxygen Infrared method after fusion under inert gas
    BS EN ISO 17715:2014 Flour from wheat (Triticum aestivum L.). Amperometric method for starch damage measurement
    DIN EN ISO 489 E : 1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
    ISO Guide 35:2017 Reference materials Guidance for characterization and assessment of homogeneity and stability
    CSA ISO 15197 : 2015 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
    DIN EN 15616 E : 2013 COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    09/30206298 DC : 0 BS EN 16011 - PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
    ISO/IEC Guide 99:2007 International vocabulary of metrology Basic and general concepts and associated terms (VIM)
    BS ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
    BS EN 15703-2:2014 Copper and copper alloys. Determination of manganese content Flame atomic absorption spectrometric method (FAAS)
    10/30218038 DC : DRAFT MAY 2010 BS ISO 15112 - NATURAL GAS - ENERGY DETERMINATION
    17/30341492 DC : 0 BS ISO 20391-1 - BIOTECHNOLOGY - CELL COUNTING - PART 1: GENERAL GUIDANCE ON CELL COUNTING METHODS
    BS EN ISO 13843:2017 Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods
    02/101929 DC : DRAFT FEB 2002 PREN 12697-38 - BITUMINOUS MIXTURES - TEST METHODS FOR HOT MIX ASPHALT - PART 38: TEST EQUIPMENT AND CALIBRATION
    UNI EN 16117-1 : 2011 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85%
    04/30114476 DC : DRAFT JUN 2004 EN 14938-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD
    I.S. EN 12506:2003 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CL[-], CO, CR, CR (6), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN
    04/30114470 DC : DRAFT JUN 2004 EN 14937-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 1: SPECTROMETRIC METHOD
    16/30310656 DC : 0 BS EN ISO 18369-1 - OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS
    PD CEN/TR 10354:2011 Chemical analysis of ferrous Materials. Analysis of ferro-silicon. Determination of Si and Al by X-ray fluorescence spectrometry
    DIN EN 15022-4:2012-01 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
    BS EN 10351:2011 Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
    BS ISO 16638-1 : 2015 COR 2017 RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS
    S.R. CEN/TR 10353:2011 CHEMICAL ANALYSIS OF FERROUS MATERIALS - ANALYSIS OF FERRO-SILICON - DETERMINATION OF AL, TI AND P BY INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY
    ISO 28218:2010 Radiation protection Performance criteria for radiobioassay
    07/30159086 DC : 0 BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    08/30153135 DC : 0 BS ISO 28218 - RADIATION PROTECTION - PERFORMANCE CRITERIA FOR RADIOBIOASSAY
    BS ISO 27048:2011 Radiation protection. Dose assessment for the monitoring of workers for internal radiation exposure
    BIS IS 15393-6 : 2003(R2009) ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES
    16/30340978 DC : 0 BS ISO 19983 - RUBBER - DETERMINATION OF PRECISION OF TEST METHODS
    BS 6200-3.40.3:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of copper content
    NF EN ISO 15351 : 2010 STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD)
    DIN EN 15605:2010-12 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
    DIN EN ISO 27971:2015-11 Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015)
    UNI EN 15616 : 2013 COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    PD ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results. Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
    BS ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of the trueness of a standard measurement method
    04/30118518 DC : DRAFT AUG 2004 EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD
    BS ISO 37:2017 Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties
    07/30160477 DC : 0 BS EN 15622 - COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    BS EN 15622:2010 Copper and copper alloys. Determination of lead content. Flame atomic absorption spectrometric method (FAAS)
    10/30219236 DC : DRAFT DEC 2010 BS ISO 22514-7 - STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
    BS EN ISO 11876:2010 Hardmetals. Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders. Flame atomic absorption spectrometric method
    DIN ISO 5725-6:2002-08 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 6: USE IN PRACTICE OF ACCURACY VALUES
    11/30218023 DC : 0 BS EN ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
    BS ISO 14127:2008 Carbon-fibre-reinforced composites. Determination of the resin, fibre and void contents
    04/30114464 DC : DRAFT JUN 2004 EN 14936-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 1: TITRIMETRIC METHOD
    BS 6043-3.4:2000 Methods of sampling and test for carbonaceous materials used in aluminium manufacture Electrodes - Determination of the open porosity and bulk density (apparent density) of cathode blocks and prebaked anodes by a hydrostatic method
    09/30151431 DC : 0 BS ISO 27048 - RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE
    14/30196840 DC : 0 BS ISO 19272 - LOW ALLOYED STEEL - DETERMINATION OF TEN ELEMENTS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (ROUTINE METHOD)
    DIN EN 15616:2013-02 COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    14/30283682 DC : 0 BS ISO 14707 - SURFACE CHEMICAL ANALYSIS - GLOW DISCHARGE OPTICAL EMISSION SPECTROMETRY (GD-OES) - INTRODUCTION TO USE
    ISO 20391-1:2018 Biotechnology — Cell counting — Part 1: General guidance on cell counting methods
    BS ISO 11877:2008 Hardmetals. Determination of silicon in cobalt metal powders. Photometric method
    DD ISO/TS 13899-3:2005 Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of W content
    15/30318244 DC : 0 BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES
    04/30118511 DC : DRAFT AUG 2004 EN 15022-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 3: LOW TIN CONTENT - FAAS METHOD
    UNE-EN 15023-3:2011 Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS)
    08/30181397 DC : DRAFT APR 2008 BS EN 60456 - CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
    BS ISO 17058:2004 Steel and iron. Determination of arsenic content. Spectrophotometric method
    PREN 16117-2 : DRAFT 2011 COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80%
    13/30288136 DC : 0 BS EN 15703-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS 6200-3.11.3:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of cobalt Flame atomic absorption spectrometric method
    17/30312516 DC : 0 BS EN ISO 4945 - STEEL - DETERMINATION OF NITROGEN - SPECTROPHOTOMETRIC METHOD
    DIN EN 15025 E : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO 14127:2008 Carbon-fibre-reinforced composites Determination of the resin, fibre and void contents
    BS EN 15690-2:2009 Copper and copper alloys. Determination of iron content Flame atomic absorption spectrometric method (FAAS)
    03/306294 DC : DRAFT APR 2003 EN 14662-3 - AMBIENT AIR QUALITY - STANDARD METHOD FOR THE MEASUREMENT OF BENZENE CONCENTRATION - PART 3: AUTOMATED PUMPED SAMPLING WITH IN SITU GAS CHROMATOGRAPHIC ANALYSIS
    CSA ISO 10012 : 2003 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
    16/30348268 DC : 0 BS EN 15024-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS ISO 13468-2 : 1999 AMD 16335 PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - DOUBLE-BEAM INSTRUMENT
    07/30150368 DC : 0 ISO 16918-1 - IRON AND STEEL - DETERMINATION OF NINE ELEMENTS BY THE INDUCTIVELY COUPLED PLASMA ATOMIC MASS SPECTROSCOPIC METHOD - PART 1: DETERMINATION OF TIN, ANTIMONY, CERIUM, LEAD AND BISMUTH
    BS ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
    UNE-EN 16117-1:2012 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
    BS ISO 15790:2004 Graphic technology and photography. Certified reference materials for reflection and transmission metrology. Documentation and procedures for use, including determination of combined standard uncertainty
    CSA ISO/TR 10017 : 2003 : R2013 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    BIS IS/ISO 10012 : 2003(R2009) MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
    DIN EN ISO 520:2011-03 Cereals and pulses - Determination of the mass of 1 000 grains (ISO 520:2010)
    03/109441 DC : DRAFT JUNE 2003 EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    I.S. EN ISO 17718:2014 WHOLEMEAL AND FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF RHEOLOGICAL BEHAVIOUR AS A FUNCTION OF MIXING AND TEMPERATURE INCREASE (ISO 17718:2013)
    DIN EN 10351:2011-05 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
    ISO 12985-1:2000 Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 1: Determination of apparent density using a dimensions method
    I.S. EN ISO 520:2010 CEREALS AND PULSES - DETERMINATION OF THE MASS OF 1000 GRAINS
    ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
    I.S. EN 60456:2016 CLOTHES WASHING MACHINES FOR HOUSEHOLD USE - METHODS FOR MEASURING THE PERFORMANCE
    CEI UNI 70099 : 2010 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    I.S. EN ISO 18369-1:2017 OPHTHALMIC OPTICS - CONTACT LENSES - PART 1: VOCABULARY, CLASSIFICATION SYSTEM AND RECOMMENDATIONS FOR LABELLING SPECIFICATIONS (ISO 18369-1:2017, CORRECTED VERSION 2017-10-01)
    ISO 21748:2017 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation
    I.S. EN 15703-2:2014 COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO 19730:2008 Soil quality — Extraction of trace elements from soil using ammonium nitrate solution
    I.S. EN 12014-2:2017 FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS
    S.R. CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
    ISO 1169:2006 Zinc alloys Determination of aluminium content Titrimetric method
    I.S. EN ISO 13468-1:1997 PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT
    ISO 15790:2004 Graphic technology and photography — Certified reference materials for reflection and transmission metrology — Documentation and procedures for use, including determination of combined standard uncertainty
    UNI CEN/TS 16011 : 2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
    I.S. EN ISO 15112:2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
    ISO/TS 21749:2005 Measurement uncertainty for metrological applications — Repeated measurements and nested experiments
    CEI UNI EN ISO/IEC 17025 : 2008 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
    UNE-EN 15616:2014 Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS)
    UNE-EN ISO 17718:2015 Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase (ISO 17718:2013)
    DIN EN 15024-2:2007-01 COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    UNE-EN 10351:2012 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
    UNI EN 15915 : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    IEC 60456:2010 Clothes washing machines for household use - Methods for measuring the performance
    DIN EN 14936-1:2006-09 Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method
    DIN EN 14242 E : 2004 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS
    DIN EN 14185-2:2006-08 Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column
    DIN EN 13040:2008-01 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
    DIN EN ISO 20743 E : 2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
    BS EN 12697-38:2004 Bituminous mixtures. Test methods for hot mix asphalt Test equipment and calibration
    BS EN 10184:2006 Chemical analysis of ferrous materials. Determination of phosphorus in non-alloyed steels and irons. Molybdenum blue spectrophotometric method
    UNE-EN ISO 14556:2016 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)
    BS EN ISO 9913-2:2000 Optics and optical instruments. Contact lenses Determination of oxygen permeability and transmissibility by the coulometric method
    BS EN 14662-4:2005 Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by thermal desorption and gas chromatography
    BS EN 14940-2:2006 Copper and copper alloys. Determination of chromium content FAAS method
    BS EN ISO 14111:1999 Natural gas. Guidelines to traceability in analysis
    BS EN 14937-2:2006 Copper and copper alloys. Determination of antimony content FAAS method
    BS EN ISO 14556:2015 Metallic materials. Charpy V-notch pendulum impact test. Instrumented test method
    I.S. EN 61223-2-6:2007 EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT
    I.S. EN ISO 20743:2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
    DIN EN 12506:2003-09 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF PH, AS, BA, CD, CI[-], CO, CR, CR(VI), CU, MO, NI, NO[2-], PB, TOTAL S, SO[4][2-], V AND ZN
    CEN/TS 16800:2015 GUIDELINE FOR THE VALIDATION OF PHYSICO-CHEMICAL ANALYTICAL METHODS
    EN 12506:2003 Characterization of waste - Analysis of eluates - Determination of pH, As, Ba, Cd, Cl-, Co, Cr, Cr Vl, Cu, Mo, Ni, NO2-, Pb, total S, SO42-, V and Zn
    DIN EN ISO 489:1999-08 Plastics -Determination of refractive index (ISO 489:1999)
    DIN EN 15915:2010-12 Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS)
    DIN EN 12441-9:2005-03 Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method
    DIN EN 12441-8:2005-03 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method
    EN 12441-10:2004 Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method
    EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method
    DIN EN 15062:2006-08 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
    DIN EN ISO 13900:2002-10 STEEL - DETERMINATION OF HIGH BORON CONTENT - CURCUMIN SPECTROPHOTOMETRIC METHOD AFTER DISTILLATION
    DIN EN 14939:2006-09 Copper and copper alloys - Determination of beryllium content - FAAS method
    EN 14938-2:2010 Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS)
    EN 10361:2015 Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method
    EN 13503-3 : 2000 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
    EN 15023-3:2010 Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS)
    CEN/TS 15025:2006 Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometry method (FAAS)
    EN ISO 11979-3:2012 Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012)
    EN 12441-8:2004 Zinc and zinc alloys - Chemical analysis - Part 8: Determination of tin in secondary zinc - Flame atomic absorption spectrometric method
    EN 10351:2011 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Mn, P, Cu, Ni, Cr, Mo, V, Co, Al (total) and Sn [Routine method]
    EN 10355:2013 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method]
    EN 10184:2006 Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method
    EN 15022-4:2011 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
    CEN/TS 15022-4:2006 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometry method (FAAS)
    DIN EN 14242:2004-12 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
    DIN EN 14941:2006-09 Copper and copper alloys - Determination of cobalt content - FAAS method
    CEN/TS 15605:2007 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
    EN 12441-9:2004 Zinc and zinc alloys - Chemical analysis - Part 9: Determination of nickel in zinc alloys - Flame atomic absorption spectrometric method
    DIN EN 12441-7:2005-03 Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction
    CR 14377:2002 Air quality - Approach to uncertainty estimation for ambient air reference measurement methods
    BS EN ISO 7235:2009 Acoustics. Laboratory measurement procedures for ducted silencers and air-terminal units. Insertion loss, flow noise and total pressure loss
    I.S. EN 14242:2004 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTRAL ANALYSIS
    11/30252539 DC : 0 BS EN 10355 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO, SN [ROUTINE METHOD]
    17/30334867 DC : 0 BS ISO 7305 - MILLED CEREAL PRODUCTS - DETERMINATION OF FAT ACIDITY
    I.S. EN ISO 11876:2010 HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
    BS ISO 19272:2015 Low alloyed steel. Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu. Glow discharge optical emission spectrometry (routine method)
    14/30275429 DC : 0 BS ISO 16638-1 - RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: URANIUM
    DD CEN/TS 15022-4:2006 Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometry method (FAAS)
    04/30103818 DC : DRAFT JUL 2004 ISO 11979-3 - OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
    UNE-EN ISO 27971:2015 Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015)
    04/30114467 DC : DRAFT JUN 2004 EN 14936-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ALUMINIUM CONTENT - PART 2: FAAS METHOD
    18/30318762 DC : 0 BS ISO 20258 - MAGNESIUM LITHIUM ALLOYS - DETERMINATION OF LITHIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD
    I.S. CR 14377:2002 AIR QUALITY - APPROACH TO UNCERTAINTY ESTIMATION FOR AMBIENT AIR REFERENCE MEASUREMENT METHODS
    DIN EN ISO 17715 E : 2015 FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - AMPEROMETRIC METHOD FOR STARCH DAMAGE MEASUREMENT (ISO 17715:2013)
    BS EN 61223-3-5:2004 Evaluation and routine testing in medical imaging departments Acceptance tests - Imaging performance of computed tomography X-ray equipment
    I.S. EN 16117-2:2012 COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80%
    UNE-ISO 37:2013 Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties
    ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization
    DIN EN 15916-2:2010-12 Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS)
    BS EN 16117-2:2012 Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content higher than 99,80 %
    04/30118515 DC : DRAFT AUG 2004 EN 15022-4 - COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FAAS METHOD
    UNI EN ISO 520 : 2011 CEREALS AND PULSES - DETERMINATION OF THE MASS OF 1000 GRAINS
    12/30208986 DC : 0 BS ISO 13933 - STEEL AND IRON - DETERMINATION OF CALCIUM AND MAGNESIUM - INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRIC METHOD
    DIN EN 15428 E : 2007 SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION
    UNI EN ISO 15350 : 2010 STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD)
    I.S. CEN TS 14938-2:2006 COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FAAS METHOD
    BS EN 10361:2015 Alloyed steels. Determination of nickel content. Inductively coupled plasma optical emission spectrometric method
    BS EN ISO 16638-1:2017 Radiological protection. Monitoring and internal dosimetry for specific materials Inhalation of uranium compounds
    04/30114482 DC : DRAFT JUN 2004 EN 14940-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 2: FAAS METHOD
    UNE-EN 15025:2011 Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS)
    04/30118503 DC : DRAFT AUG 2004 EN 15025 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FAAS METHOD
    12/30237514 DC : 0 BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
    I.S. EN 13503-3:2000 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
    ANSI CGATS/ISO 15790 : 2005(R2007) GRAPHIC TECHNOLOGY AND PHOTOGRAPHY - CERTIFIED REFERENCE MATERIALS FOR REFLECTION AND TRANSMISSION METROLOGY - DOCUMENTATION AND PROCEDURES FOR USE, INCLUDING DETERMINATION OF COMBINED STANDARD UNCERTAINTY
    04/30114488 DC : DRAFT JUN 2004 EN 14942-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ARSENIC CONTENT - PART 2: FAAS METHOD
    UNI EN ISO 11876 : 2010 HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
    09/30196425 DC : 0 BS EN ISO 520 - CEREALS AND PULSES - DETERMINATION OF THE MASS OF 1000 GRAINS
    PD ISO/TS 17822-1:2014 In vitro diagnostic test systems. Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens General requirements, terms and definitions
    BS EN ISO 10720:2007 Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas
    BS 6200-3.40.2:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of nickel content
    PD ISO/TR 22305:2008 Cigarettes. Measurement of nicotinefree dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke. Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances
    16/30341731 DC : 0 BS EN 12014-2 - FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS
    PD CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
    DD ISO/TS 19036 : 2006 MICROBIOLOGY OF FOOD AND ANIMAL FEEDING STUFFS - GUIDELINES FOR THE ESTIMATION OF MEASUREMENT UNCERTAINTY FOR QUANTITATIVE DETERMINATIONS
    12/30256275 DC : 0 BS ISO 17718 - WHOLE MEAL AND FLOUR FROM WHEAT (TRITICUM AESTIVUM) - DETERMINATION OF RHEOLOGICAL BEHAVIOUR AS A FUNCTION OF MIXING AND TEMPERATURE INCREASE
    DIN EN 15915 E : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO 10153:1997 Steel Determination of boron content Curcumin spectrophotometric method
    DIN EN ISO 17718 E : 2015 WHOLEMEAL AND FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF RHEOLOGICAL BEHAVIOUR AS A FUNCTION OF MIXING AND TEMPERATURE INCREASE (ISO 17718:2013)
    OIML V 2-200 : 2012 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    BS ISO 22514-7:2012 Statistical methods in process management. Capability and performance Capability of measurement processes
    BS EN ISO 15193:2009 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Requirements for content and presentation of reference measurement procedures
    UNI EN 14938-2 : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS EN 14938-2:2010 Copper and copper alloys. Determination of bismuth content Flame atomic absorption spectrometric method (FAAS)
    04/30118971 DC : DRAFT DEC 2004 ISO 20553 - RADIATION PROTECTION - MONITORING OF WORKERS OCCUPATIONALLY EXPOSED TO A RISK OF INTERNAL CONTAMINATION WITH RADIOACTIVE MATERIAL
    DIN EN 15025:2010-12 Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS)
    10/30233988 DC : 0 BS EN 16192 - CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
    DIN ISO 19730:2009-07 SOIL QUALITY - EXTRACTION OF TRACE ELEMENTS FROM SOIL USING AMMONIUM NITRATE SOLUTION
    S.R. CEN/TR 10345:2013 GUIDELINE FOR STATISTICAL DATA TREATMENT OF INTER LABORATORY TESTS FOR VALIDATION OF ANALYTICAL METHODS
    UNI ISO/TS 21749 : 2009 MEASUREMENT UNCERTAINTY FOR METROLOGICAL APPLICATIONS - REPEATED MEASUREMENTS AND NESTED EXPERIMENTS
    DIN ISO 5725-2:2002-12 Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method (ISO 5725-2:1994 including Technical Corrigendum 1:2002)
    05/30135474 DC : DRAFT JUNE 2005 BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION
    PD ISO GUIDE 35:2017 Reference materials. Guidance for characterization and assessment of homogeneity and stability
    DIN EN ISO 15351:2010-08 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)
    DIN EN 16117-1:2011-12 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
    BS EN 16117-1:2011 Copper and copper alloys. Determination of copper content Electrolytic determination of copper in materials with copper content less than 99,85 %
    03/316092 DC : DRAFT SEP 2003 ISO 16962 - SURFACE CHEMICAL ANALYSIS - ANALYSIS OF ZINC AND/OR ALUMINIUM-BASED METALLIC COATINGS BY GLOW-DISCHARGE OPTICAL-EMISSION SPECTROMETRY
    09/30210423 DC : 0 BS EN ISO 15350 - STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD)
    BS ISO 15112 : 2011 NATURAL GAS - ENERGY DETERMINATION
    UNI EN 15690-2 : 2009 COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    07/30161913 DC : 0 EN 15656 - COPPER AND COPPER ALLOYS - DETERMINATION OF PHOSPHORUS CONTENT - SPECTROPHOTOMETRIC METHOD
    UNI EN 15023-3 : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    UNI EN 15022-4 : 2011 COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS ISO 17053:2005 Steel and iron. Determination of oxygen. Infrared method after fusion under inert gas
    ISO 15355:1999 Steel and iron — Determination of chromium content — Indirect titration method
    17/30344626 DC : 0 BS EN ISO 7971-3 - CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD
    UNI EN 15025 : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    04/30118507 DC : DRAFT AUG 2004 EN 15023-3 - COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FAAS METHOD
    BS ISO 11648-2:2001 Statistical aspects of sampling from bulk materials Sampling of particulate materials
    04/30114485 DC : DRAFT JUN 2004 EN 14941 - COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD
    BS ISO TR 5168:1998 Measurement of fluid flow. Evaluation of uncertainties
    BS ISO 8178-2:2008 Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions under field conditions
    I.S. EN 15022-4:2011 COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO/TS 21748:2004 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
    DIN EN 15690-2:2009-07 COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    UNI ISO 11462-1 : 2014 GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 1: ELEMENTS OF SPC
    UNI CEN/TR 10345 : 2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
    UNE-EN ISO 15112:2014 Natural gas - Energy determination (ISO 15112:2011)
    I.S. EN ISO 13468-2:2006 PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT
    ISO 19272:2015 Low alloyed steel Determination of C, Si, Mn, P, S, Cr, Ni, Al, Ti and Cu - Glow discharge optical emission spectrometry (routine method)
    BS EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
    UNI EN 10351 : 2011 CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD]
    I.S. EN ISO 15796:2008 GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS
    ISO 10576-1:2003 Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles
    I.S. EN 15915:2010 COPPER AND COPPER ALLOYS - DETERMINATION OF SILVER CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    I.S. EN 10351:2011 CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD]
    I.S. EN ISO 16638-1:2017 RADIOLOGICAL PROTECTION - MONITORING AND INTERNAL DOSIMETRY FOR SPECIFIC MATERIALS - PART 1: INHALATION OF URANIUM COMPOUNDS (ISO 16638-1:2015)
    ISO/TR 5168:1998 Measurement of fluid flow Evaluation of uncertainties
    I.S. CEN TS 15022-4:2006 COPPER AND COPPER ALLOYS - DETERMINATION OF TIN CONTENT - PART 4: MEDIUM TIN CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    ISO/TR 24498:2006 Paper, board and pulps Estimation of uncertainty for test methods
    I.S. EN 15605:2010 COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY
    ISO 22514-7:2012 Statistical methods in process management Capability and performance Part 7: Capability of measurement processes
    ISO 19867-1:2018 Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability
    CSA ISO 10012-2 : 0 QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES
    BIS IS 16179-1 : 2014 STATISTICAL METHODS - GUIDELINES FOR THE EVALUATION OF CONFORMITY WITH SPECIFIED REQUIREMENTS - PART 1: GENERAL PRINCIPLES
    UNE-EN ISO 18113-1:2012 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
    PREN ISO 20483 : DRAFT 2012 CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO/DIS 20483:2012)
    ASTM D 7448 : 2016 : REDLINE Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke
    EN ISO 7971-3:2009 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
    DIN EN 12697-38:2004-10 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration; German version EN 12697-38:2004
    DIN EN ISO 20988 E : 2007 AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY
    DIN EN ISO 14556:2016-02 METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD (ISO 14556:2015)
    DIN EN ISO 11979-3:2013-04 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012)
    DIN EN ISO 20483:2014-03 CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO 20483:2013)
    DIN EN ISO 20743:2013-12 Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013)
    BS EN 12441-9:2004 Zinc and zinc alloys. Chemical analysis Determination of nickel in zinc alloys. Flame atomic absorption spectrometric method
    BS EN ISO 20743:2013 Textiles. Determination of antibacterial activity of textile products
    ISO 13900:1997 Steel — Determination of boron content — Curcumin spectrophotometric method after distillation
    ISO 10338:1996 Optics and optical instruments — Contact lenses — Determination of curvature
    BS EN 14941:2006 Copper and copper alloys. Determination of cobalt content. FAAS method
    I.S. EN ISO 15197:2015 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013)
    I.S. EN ISO 7235:2009 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR-TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
    DIN EN 13370:2003-09 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, CN[-] EASILY LIBERATABLE, F[-]
    I.S. EN 10318:2005 DETERMINATION OF THICKNESS AND CHEMICAL COMPOSITION OF ZINC-AND ALUMINIUM-BASED METALLIC COATINGS - ROUTINE METHOD
    I.S. EN ISO 20483:2013 CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO 20483:2013)
    I.S. EN 13040:2007 SOIL IMPROVERS AND GROWING MEDIA - SAMPLE PREPARATION FOR CHEMICAL AND PHYSICAL TESTS, DETERMINATION OF DRY MATTER CONTENT, MOISTURE CONTENT AND LABORATORY COMPACTED BULK DENSITY
    I.S. EN 13656:2002 CHARACTERISATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]) AND HYDROCHLORIC (HCI) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS
    I.S. EN ISO 11609:2017 DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING (ISO 11609:2017)
    DIN EN ISO 10720:2007-06 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997)
    EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
    I.S. EN ISO 14556:2015 METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD (ISO 14556:2015)
    I.S. EN ISO 11979-3:2012 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012)
    DIN EN ISO 7235:2010-01 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
    DIN EN 12441-10:2005-03 Zinc and zinc alloys - Chemical analysis - Part 10: Determination of chromium and titanium in zinc alloys - Spectrophotometric method
    UNI EN ISO 21570 : 2013 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS
    UNI ISO/TR 18532 : 2010 Guide to the application of statistical methods for quality and standardization in the industrial sector
    DIN EN 61620 : 1999 INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
    BS 4401-6:1996 Methods of test for meat and meat products Determination of chloride content (Volhard method)
    BIS IS 15393-5 : 2003(R2009) ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 5: ALTERNATIVE METHODS FOR THE DETERMINATION OF THE PRECISION OF A STANDARD MEASUREMENT METHOD
    VDI/VDE 2645 Blatt 2:2014-09 Capability test for fastening technology - Machine capability test - MCT
    BS 2782-5.531A(1999) : 1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
    VDE 0370-16 : 1999 INSULATING LIQUIDS - DETERMINATION OF DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
    DIN EN 15703-2 E : 2015 COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO 13898-2:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 2: Determination of nickel content
    UNI CEN/TS 15916-1 : 2011 COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Elements of SPC
    BIS IS 16086 : 2013 INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
    BS EN ISO 27971:2015 Cereals and cereal products. Common wheat (Triticum aestivum L.). Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology
    I.S. EN 15690-2:2009 COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    DIN ISO 5725-1:1997-11 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PART 1: GENERAL PRINCIPLES AND DEFINITIONS
    04/30114461 DC : DRAFT JUN 2004 EN 14935 - COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ETA-AAS METHOD
    ISO/TR 21074:2016 Application of ISO 5725 for the determination of repeatability and reproducibility of precision tests performed in standardization work for chemical analysis of steel
    04/30114473 DC : DRAFT JUN 2004 EN 14937-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF ANTIMONY CONTENT - PART 2: FAAS METHOD
    04/30114479 DC : DRAFT JUN 2004 EN 14939 - COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD
    BS ISO 28218:2010 Radiation protection. Performance criteria for radiobioassay
    BS EN 16192:2011 Characterization of waste. Analysis of eluates
    BS EN 15616:2012 Copper and copper alloys. Determination of cadmium content. Flame atomic absorption spectrometric method (FAAS)
    BS ISO 17718 : 2013 WHOLEMEAL AND FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF RHEOLOGICAL BEHAVIOUR AS A FUNCTION OF MIXING AND TEMPERATURE INCREASE
    UNI EN 15916-2 : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Basic methods for the determination of repeatability and reproducibility of a standard measurement method
    14/30289810 DC : 0 BS EN ISO 14556 - METALLIC MATERIALS - CHARPY V-NOTCH PENDULUM IMPACT TEST - INSTRUMENTED TEST METHOD
    DIN EN 16192:2012-02 Characterization of waste - Analysis of eluates
    ISO/TS 14167:2003 Gas analysis General quality assurance aspects in the use of calibration gas mixtures - Guidelines
    NF EN 10351 : 2011 CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN [ROUTINE METHOD]
    I.S. EN ISO 10012:2003 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
    BS EN 15428:2007 Soil improvers and growing media. Determination of particle size distribution
    BS ISO 13933:2014 Steel and iron. Determination of calcium and magnesium. Inductively coupled plasma atomic emission spectrometric method
    DIN EN 15428:2007-11 Soil improvers and growing media - Determination of particle size distribution
    PD ISO/TS 10719:2016 Cast irons. Determination of non-combined carbon content. Infrared absorption method after combustion in an induction furnace
    03/317065 DC : DRAFT NOV 2003 ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1
    UNI EN 15622 : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    PD CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods
    DIN EN ISO 15193:2009-10 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
    03/304751 DC : DRAFT APR 2003 IEC 61223-3-5 ED.1.0 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT
    09/30205176 DC : 0 ISO/TS 25680 - MEDICAL LABORATORIES - CALCULATION AND EXPRESSION OF MEASUREMENT UNCERTAINTY
    UNE-EN 15690-2:2010 Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS)
    04/30107827 DC : DRAFT JAN 2004 ISO 17925 - ZINC AND/OR ALUMINIUM BASED COATINGS ON STEEL - DETERMINATION OF MASS PER UNIT AREA AND CHEMICAL COMPOSITION - GRAVIMETRY, INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION SPECTROMETRY AND FLAME ATOMIC ABSORPTION SPECTROMETRY
    BS ISO 17715 : 2013 FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - AMPEROMETRIC METHOD FOR STARCH DAMAGE MEASUREMENT
    UNI EN 15605 : 2010 COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY
    BS ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results General principles and definitions
    07/30113186 DC : 0 BS ISO 8178-2 - RECIPROCATING INTERNAL COMBUSTION ENGINES - EXHAUST EMISSION MEASUREMENT - PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS UNDER FIELD CONDITIONS
    UNE-EN 15916-2:2011 Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS)
    BS ISO 12787:2011 Cosmetics. Analytical methods. Validation criteria for analytical results using chromatographic techniques
    BIS IS 7920-1 : 2012(R2017) STATISTICS - VOCABULARY AND SYMBOLS - PART 1: GENERAL STATISTICAL TERMS AND TERMS USED IN PROBABILITY
    UNE-CEN/TS 15916-1:2012 EX Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS)
    S.R. CEN TS 15605:2007 COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY
    04/30122896 DC : DRAFT SEP 2004 ISO 15112 - NATURAL GAS - ENERGY DETERMINATION
    UNE-ISO/IEC GUIA 99:2012 IN International vocabulary of metrology. Basics and general concepts and associated terms (VIM)
    BS EN ISO 15351:2010 Steel and iron. Determination of nitrogen content. Thermal conductimetric method after fusion in a current of inert gas (Routine method)
    DD CEN/TS 15025:2006 Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometry method (FAAS)
    12/30257568 DC : 0 BS ISO 17715 - FLOUR FROM WHEAT (TRICUM AESTIVUM) - METHOD FOR THE MEASUREMENT OF DAMAGE TO STARCH USING AN AMPEROMETRIC METHOD
    BS EN 15022-4:2011 Copper and copper alloys. Determination of tin content Medium tin content. Flame atomic absorption spectrometric method (FAAS)
    UNE-EN ISO 16638-1:2018 Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015)
    07/30166049 DC : 0 BS EN 15703-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 1: SPECTROPHOTOMETRIC METHOD
    BS 6200-3.40.4:1997 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Multi-element methods Determination of nickel, copper and cobalt contents by inductively coupled plasma atomic emission spectrometric method. Determination of cobalt content
    BIS IS/ISO/IEC 17025 : 2005 AMD 1 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
    DIN EN ISO 7971-3:2010-01 CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD
    I.S. CEN TS 15025:2006 COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    14/30296672 DC : 0 BS ISO GUIDE 33 - REFERENCE MATERIALS - GOOD PRACTICE IN USING REFERENCE MATERIALS
    BS ISO 19730:2008 Soil quality. Extraction of trace elements from soil using ammonium nitrate solution
    ISO 11435:2011 Nickel alloys Determination of molybdenum content Inductively coupled plasma/atomic emission spectrometric method
    EN ISO 20743:2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS (ISO 20743:2013)
    UNE-EN ISO 520:2011 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010)
    BS ISO/IEC TR 13233:1995 Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services
    UNE-EN 15915:2011 Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS)
    UNI ISO 11648-2 : 2008 STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 2: SAMPLING OF PARTICULATE MATERIALS
    DIN EN 10355:2013-11 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method]
    UNI ISO 22514-7:2014 STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES
    ISO 3750:2006 Zinc alloys Determination of magnesium content Flame atomic absorption spectrometric method
    ISO 13468-1:1996 Plastics Determination of the total luminous transmittance of transparent materials Part 1: Single-beam instrument
    ISO/TR 17055:2002 Steel Determination of silicon content Inductively coupled plasma atomic emission spectrometric method
    DIN EN 10355 E : 2013 CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD]
    ISO/TS 10719:2016 Cast irons — Determination of non-combined carbon content — lnfrared absorption method after combustion in an induction furnace
    ISO 12985-2:2000 Carbonaceous materials used in the production of aluminium Baked anodes and cathode blocks Part 2: Determination of apparent density and of open porosity using a hydrostatic method
    I.S. EN ISO 13843:2017 WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS (ISO 13843:2017)
    I.S. EN 16192:2011 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
    I.S. EN 15916-2:2010 COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 2: MEDIUM TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    S.R. CR 10299:1999 GUIDELINES FOR THE PREPARATION OF STANDARD ROUTINE METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLOURESCENCE SPECTROMETRY
    UNI EN ISO 15796 : 2009 GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS
    I.S. CEN TS 15023-3:2006 COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    ISO 13899-2:2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 2: Determination of Nb content
    UNE-EN 10355:2014 Chemical analysis of ferrous materials - Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels - Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method]
    UNE-EN 14938-2:2012 Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS)
    DIN EN ISO 15112 E : 2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
    I.S. EN 10361:2015 ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD
    UNI EN ISO 15351 : 2010 STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD)
    IPC TM 650-MDP : 2012 IPC TEST METHOD DEVELOPMENT PACKET
    ISO/TS 18223:2015 Nickel alloys — Determination of Nickel content — Inductively coupled plasma atomic emission spectrometric method
    EN ISO 15349-2:2003 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999)
    ISO 22725:2007 Nickel alloys Determination of tantalum Inductively coupled plasma atomic emission spectrometric method
    ISO 18632:2010 Alloyed steel Determination of manganese Potentiometric and visual titration method
    EN 12014-2:2017 Foodstuffs - Determination of nitrate and/or nitrite content - Part 2: HPLC/IC method for the determination of nitrate content of vegetables and vegetable products
    ISO 11648-2:2001 Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials
    ISO 15353:2001 Steel and iron — Determination of tin content — Flame atomic absorption spectrometric method (extraction as Sn-SCN)
    ISO/TR 22305:2006 Cigarettes Measurement of nicotine-free dry particulate matter, nicotine, water and carbon monoxide in cigarette smoke Analysis of data from collaborative studies reporting relationships between repeatability, reproducibility and tolerances
    ISO 14707:2015 Surface chemical analysis Glow discharge optical emission spectrometry (GD-OES) Introduction to use
    DIN EN 12441-11:2006-10 Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method
    DIN EN 14941 E : 2006 COPPER AND COPPER ALLOYS - DETERMINATION OF COBALT CONTENT - FAAS METHOD
    DIN EN ISO 20483 E : 2014 CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD (ISO 20483:2013)
    DIN EN ISO 13468-2:2006-07 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
    DIN EN 14935 E : 2006 COPPER AND COPPER ALLOYS - DETERMINATION OF IMPURITIES IN PURE COPPER - ET AAS METHOD
    DIN EN 14939 E : 2006 COPPER AND COPPER ALLOYS - DETERMINATION OF BERYLLIUM CONTENT - FAAS METHOD
    DIN EN 15062 E : 2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
    DIN EN 15022-3:2006-12 Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS)
    BS EN 15024-2:2006 Copper and copper alloys. Determination of zinc content Flame atomic absorption spectrometry method (FAAS)
    IEC 61223-3-5:2004 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment
    ISO 15350:2000 Steel and iron — Determination of total carbon and sulfur content — Infrared absorption method after combustion in an induction furnace (routine method)
    UNE-EN ISO 20743:2014 Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013)
    ISO 17718:2013 Wholemeal and flour from wheat (Triticum aestivum L.) Determination of rheological behaviour as a function of mixing and temperature increase
    BS EN ISO 15349-2:2003 Unalloyed steel. Determination of low carbon content Infrared absorption method after combustion in an induction furnace (with preheating)
    UNE-EN ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
    ISO 15197:2013 In vitro diagnostic test systems — Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
    BS EN 12506:2003 Characterization of waste. Analysis of eluates. Determination of pH, As, Ba, Cd, Cl$u-, Co, Cr, Cr VI, Cu, Mo, Ni, NO2$u-, Pb, total S, SO42$u-, V and Zn
    BS EN 14662-1:2005 Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by thermal desorption and gas chromatography
    BS EN ISO 13468-2:2006 Plastics. Determination of the total luminous transmittance of transparent materials Double-beam instrument
    BS EN 10318:2005 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings. Routine method
    EN 13656 : 2002 CHARACTERIZATION OF WASTE - MICROWAVE ASSISTED DIGESTION WITH HYDROFLUORIC (HF), NITRIC (HNO[3]), AND HYDROCHLORIC (HCL) ACID MIXTURE FOR SUBSEQUENT DETERMINATION OF ELEMENTS
    EN ISO 15112:2014 NATURAL GAS - ENERGY DETERMINATION (ISO 15112:2011)
    EN 14937-1:2006 Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method
    EN ISO 18113-1:2011 In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009)
    UNI EN ISO 7235 : 2009 ACOUSTICS - LABORATORY MEASUREMENT PROCEDURES FOR DUCTED SILENCERS AND AIR- TERMINAL UNITS - INSERTION LOSS, FLOW NOISE AND TOTAL PRESSURE LOSS
    EN ISO 15351:2010 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (Routine method) (ISO 15351:1999)
    UNI EN ISO 11979-3 : 2013 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS
    UNI EN ISO 20483 : 2014 CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD
    UNI EN ISO 15193 : 2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
    UNE-EN ISO 17715:2015 Flour from wheat (Triticum aestivum L.) - Amperometric method for starch damage measurement (ISO 17715:2013)
    DIN EN 10361:2016-02 ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD
    DIN EN 15605 E : 2010 COPPER AND COPPER ALLOYS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRY
    DIN EN 10361 E : 2016 ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD
    BS EN 15605:2010 Copper and copper alloys. Inductively coupled plasma optical emission spectrometry
    I.S. EN 15062:2006 ADHESIVES FOR LEATHER AND FOOTWEAR MATERIALS - SOLVENT-BASED AND DISPERSION ADHESIVES - TESTING AGEING OF BONDS UNDER SPECIFIED CONDITIONS
    BS EN ISO 15112:2014 Natural gas. Energy determination
    12/30251275 DC : 0 BS EN ISO 20483 - CEREALS AND PULSES - DETERMINATION OF THE NITROGEN CONTENT AND CALCULATION OF THE CRUDE PROTEIN CONTENT - KJELDAHL METHOD
    12/30245706 DC : 0 BS EN ISO 20743 - TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS
    ISO 12787:2011 Cosmetics Analytical methods Validation criteria for analytical results using chromatographic techniques
    DIN EN 15622 E : 2010 COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    I.S. EN 13370:2003 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES - DETERMINATION OF AMMONIUM, AOX, CONDUCTIVITY, HG, PHENOL INDEX, TOC, EASILY LIBERATABLE CN[-], F[-]
    PREN 12014-2 : DRAFT 2016 FOODSTUFFS - DETERMINATION OF NITRATE AND/OR NITRITE CONTENT - PART 2: HPLC/IC METHOD FOR THE DETERMINATION OF NITRATE CONTENT OF VEGETABLES AND VEGETABLE PRODUCTS
    16/30279101 DC : DRAFT MAR 2016 BS EN ISO 13843 - WATER QUALITY - REQUIREMENTS FOR ESTABLISHING PERFORMANCE CHARACTERISTICS OF QUANTITATIVE MICROBIOLOGICAL METHODS
    14/30288436 DC : 0 BS EN ISO 27971 - CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPHIC PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY
    BS EN ISO 15796:2008 Gas analysis. Investigation and treatment of analytical bias
    UNI EN 16117-2 : 2013 COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80%
    ISO 29201:2012 Water quality — The variability of test results and the uncertainty of measurement of microbiological enumeration methods
    BS 6200-3.5.3:1998 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of boron Curcumin spectrophotometric method after distillation
    DD ISO/TS 21748:2004 Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
    06/30145474 DC : DRAFT JULY 2006 ISO 11876 - HARDMETALS - DETERMINATION OF CALCIUM, COPPER, IRON, POTASSIUM, MAGNESIUM, MANGANESE, SODIUM, NICKEL AND ZINC IN COBALT METAL POWDERS - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD
    09/30210426 DC : 0 BS EN ISO 15351 - STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD)
    DIN EN 15622:2010-06 Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS)
    11/30208525 DC : 0 BS EN ISO 15197 - IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
    BS ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results Use in practice of accuracy values
    11/30244575 DC : 0 BS EN 16117-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80%
    ISO 17593:2007 Clinical laboratory testing and in vitro medical devices Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
    DIN EN ISO 11876:2010-12 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
    04/30123610 DC : DRAFT OCT 2004 EN 15063-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF MAIN CONSTITUENTS AND IMPURITIES BY X-RAY - FLUORESCENCE SPECTROMETRY (XRF) - PART 1: GUIDELINES TO THE ROUTINE METHOD
    09/30191982 DC : 0 BS ISO 21748 - GUIDANCE FOR THE USE OF REPEATABILITY, REPRODUCIBILITY AND TRUENESS ESTIMATES IN MEASUREMENT UNCERTAINTY ESTIMATION
    I.S. EN ISO 18113-1:2011 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
    07/30150572 DC : 0 ISO 25337 - PLASTICS - PRODUCTION QUALITY CONTROL - STATISTICAL METHOD FOR APPLYING SINGLE MEASUREMENTS
    BS EN 10355:2013 Chemical analysis of ferrous materials. Inductively coupled plasma optical emission spectrometric analysis of unalloyed and low alloyed steels. Determination of Si, Mn, P, Cu, Ni, Cr, Mo and Sn, following dissolution with nitric and sulphuric acids [Routine method]
    I.S. EN 15025:2010 COPPER AND COPPER ALLOYS - DETERMINATION OF MAGNESIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    07/30143612 DC : 0 ISO 8586-2 - SENSORY ANALYSIS - GENERAL GUIDANCE FOR THE SELECTION, TRAINING AND MONITORING OF ASSESSORS - PART 2: EXPERT SENSORY ASSESSORS
    BS EN 15025:2010 Copper and copper alloys. Determination of magnesium content. Flame atomic absorption spectrometric method (FAAS)
    06/30146511 DC : 0 BS ISO 18113-1 - CLINICAL LABORATORY TESTING AND IN VITRO DIAGNOSTIC MEDICAL SYSTEMS - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS
    BS EN 61620:1999 Insulating liquids. Determination of the dielectric dissipation factor by measurement of the conductance and capacitance. Test method
    BS ISO 15796 : 2005 GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS
    EN ISO 13468-2:2006 Plastics - Determination of the total luminous transmittance of transparent materials - Part 2: Double-beam instrument (ISO 13468-2:1999)
    UNI EN 10355 : 2013 CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD]
    PD ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    PREN 15024-2 : DRAFT 2016 COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    UNI CEI 70099 : 2008 INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM)
    UNE-EN 15605:2011 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
    DIN EN ISO 15796:2008-11 GAS ANALYSIS - INVESTIGATION AND TREATMENT OF ANALYTICAL BIAS
    I.S. EN ISO 15351:2010 STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS (ROUTINE METHOD)
    S.R. CEN/TS 16011:2013 PLASTICS - RECYCLED PLASTICS - SAMPLE PREPARATION
    BS EN ISO 18369-1:2017 Ophthalmic optics. Contact lenses Vocabulary, classification system and recommendations for labelling specifications
    I.S. EN 15428:2007 SOIL IMPROVERS AND GROWING MEDIA - DETERMINATION OF PARTICLE SIZE DISTRIBUTION
    CEN/TR 10353:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
    ISO 13843:2017 Water quality — Requirements for establishing performance characteristics of quantitative microbiological methods
    I.S. EN 16117-1:2011 COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 1: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT LESS THAN 99,85%
    ISO/TR 22971:2005 Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results
    ISO 19983:2017 Rubber — Determination of precision of test methods
    ISO/TS 17822-1:2014 In vitro diagnostic test systems Qualitative nucleic acid-based in vitro examination procedures for detection and identification of microbial pathogens Part 1: General requirements, terms and definitions
    ISO 13898-3:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 3: Determination of copper content
    I.S. EN 61223-3-5:2004 EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 3-5: ACCEPTANCE TESTS - IMAGING PERFORMANCE OF COMPUTED TOMOGRAPHY X-RAY EQUIPMENT
    17/30325894 DC : 0 BS EN 17075 - WATER QUALITY - GENERAL REQUIREMENTS AND PERFORMANCE TEST PROCEDURES FOR WATER MONITORING EQUIPMENT - MEASURING DEVICES
    S.R. ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    CEN/TR 10354:2011 Chemical analysis of ferrous materials - Analysis of ferro-silicon - Determination of Si and Al by X-ray fluorescence spectrometry
    PREN ISO 20743 : DRAFT 2012 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF ANTIBACTERIAL TEXTILE PRODUCTS (ISO/DIS 20743:2012)
    UNI EN ISO 20743 : 2013 TEXTILES - DETERMINATION OF ANTIBACTERIAL ACTIVITY OF TEXTILE PRODUCTS
    CR 10299 : 1998 GUIDELINES FOR THE PREPARATION OF STANDARD ROUTING METHODS WITH WAVELENGTH-DISPERSIVE X-RAY FLUORESCENCE SPECTROMETRY
    I.S. EN ISO 7971-3:2009 CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD
    ISO/TR 15349-1:1998 Unalloyed steel Determination of low carbon content Part 1: Infrared absorption method after combustion in an electric resistance furnace (by peak separation)
    ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories
    ISO 25337:2010 Plastics Production quality control Statistical method for using single measurements
    ISO 16638-1:2015 Radiological protection — Monitoring and internal dosimetry for specific materials — Part 1: Inhalation of uranium compounds
    ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
    S.R. CEN/TS 15916-1:2011 COPPER AND COPPER ALLOYS - DETERMINATION OF TELLURIUM CONTENT - PART 1: LOW TELLURIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    I.S. EN ISO 15193:2009 IN VITRO DIAGNOSTIC MEDICAL DEVICES - MEASUREMENT OF QUANTITIES IN SAMPLES OF BIOLOGICAL ORIGIN - REQUIREMENTS FOR CONTENT AND PRESENTATION OF REFERENCE MEASUREMENT PROCEDURES
    I.S. EN 15024-2:2006 COPPER AND COPPER ALLOYS - DETERMINATION OF ZINC CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    DIN EN ISO 15197:2015-12 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS (ISO 15197:2013)
    DIN EN ISO 21570 E : 2013 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS (ISO 21570:2005 + COR 1:2006 + AMD 1:2013)
    DIN EN ISO 11979-3 E : 2013 OPHTHALMIC IMPLANTS - INTRAOCULAR LENSES - PART 3: MECHANICAL PROPERTIES AND TEST METHODS (ISO 11979-3:2012)
    BS EN 12441-10:2004 Zinc and zinc alloys. Chemical analysis Determination of chromium and titanium in zinc alloys. Spectrophotometric method
    ISO 21570:2005 Foodstuffs Methods of analysis for the detection of genetically modified organisms and derived products Quantitative nucleic acid based methods
    BS EN ISO 8178-2:1997 Reciprocating internal combustion engines. Exhaust emission measurement Measurement of gaseous and particulate exhaust emissions at site
    ISO 520:2010 Cereals and pulses — Determination of the mass of 1 000 grains
    BS EN ISO 13900:2002 Steel. Determination of boron content. Curcumin spectrophotometric method after distillation
    BS EN 12441-7:2004 Zinc and zinc alloys. Chemical analysis Determination of tin. Flame atomic absorption spectrometric method after extraction
    BS EN ISO 21570 : 2005 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS
    ISO 14111:1997 Natural gas — Guidelines to traceability in analysis
    ISO 11609:2017 Dentistry — Dentifrices — Requirements, test methods and marking
    BS EN 14185-2:2006 Non fatty foods. Determination of N-methylcarbamate residues HPLC method with clean-up on a diatomaceous earth column
    BS EN 14242:2004 Aluminium and aluminium alloys. Chemical analysis. Inductively coupled plasma optical emission spectral analysis
    BS EN 15062:2006 Adhesives for leather and footwear materials. Solvent-based and dispersion adhesives. Testing ageing of bonds under specified conditions
    BS EN 14662-5:2005 Ambient air quality. Standard method for measurement of benzene concentrations Diffusive sampling followed by solvent desorption and gas chromatography
    IEC 61223-2-6:2006 Evaluation and routine testing in medical imaging departments ­ - Part 2­-6: Constancy tests ­ imaging performance of computed tomography X-ray equipment
    ISO 489:1999 Plastics Determination of refractive index
    ISO 13468-2:1999 Plastics Determination of the total luminous transmittance of transparent materials Part 2: Double-beam instrument
    ISO 4934:2003 Steel and iron Determination of sulfur content Gravimetric method
    BS EN ISO 489:1999 Plastics. Determination of refractive index
    ISO 10720:1997 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas
    UNE-EN ISO 20483:2014 Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2013)
    BS EN ISO 4934:2003 Steel and iron. Determination of sulfur content. Gravimetric method
    BS EN 14942-2:2006 Copper and copper alloys. Determination of arsenic content FAAS method
    UNE-EN 60456:2016 Clothes washing machines for household use - Methods for measuring the performance
    BS EN ISO 20483:2013 Cereals and pulses. Determination of the nitrogen content and calculation of the crude protein content. Kjeldahl method
    BS EN ISO 20988:2007 Air quality. Guidelines for estimating measurement uncertainty
    ISO 15796:2005 Gas analysis Investigation and treatment of analytical bias
    IEC 61620:1998 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
    UNE-EN ISO 7235:2010 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
    ISO 17715:2013 Flour from wheat (Triticum aestivum L.) Amperometric method for starch damage measurement
    UNE-EN ISO 11979-3:2013 Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012)
    UNE-EN ISO 7971-3:2010 Cereals - Determination of bulk density, called mass per hectolitre - Part 3: Routine method (ISO 7971-3:2009)
    ISO 7235:2003 Acoustics — Laboratory measurement procedures for ducted silencers and air-terminal units — Insertion loss, flow noise and total pressure loss
    ISO 9913-2:2000 Optics and optical instruments Contact lenses Part 2: Determination of oxygen permeability and transmissibility by the coulometric method
    ISO 11876:2010 Hardmetals Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders Flame atomic absorption spectrometric method
    ISO 15193:2009 In vitro diagnostic medical devices Measurement of quantities in samples of biological origin Requirements for content and presentation of reference measurement procedures
    BS EN 13370:2003 Characterization of waste. Analysis of eluates. Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN$u-, F$u-
    ISO 15351:1999 Steel and iron — Determination of nitrogen content — Thermal conductimetric method after fusion in a current of inert gas (Routine method)
    DIN EN ISO 21570:2013-08 Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - Quantitative nucleic acid based methods (ISO 21570:2005 + Cor 1:2006 + Amd 1:2013)
    BS EN 15022-3:2006 Copper and copper alloys. Determination of tin content Low tin content. Flame atomic absorption spectrometry method (FAAS)
    ISO 27971:2015 Cereals and cereal products — Common wheat (Triticum aestivum L.) — Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology
    ISO 18113-1:2009 In vitro diagnostic medical devices — Information supplied by the manufacturer (labelling) — Part 1: Terms, definitions and general requirements
    BS EN ISO 11979-3:2012 Ophthalmic implants. Intraocular lenses Mechanical properties and test methods
    UNE-EN ISO/IEC 17025:2017 General requirements for the competence of testing and calibration laboratories (ISO/IEC 17025:2017)
    ISO 20483:2013 Cereals and pulses — Determination of the nitrogen content and calculation of the crude protein content — Kjeldahl method
    ISO 14556:2015 Metallic materials — Charpy V-notch pendulum impact test — Instrumented test method
    BS EN 14937-1:2006 Copper and copper alloys. Determination of antimony content Spectrophotometric method
    BS EN 13040:2007 Soil improvers and growing media. Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
    BS EN ISO 11609:2017 Dentistry. Dentifrices. Requirements, test methods and marking
    ISO 20988:2007 Air quality Guidelines for estimating measurement uncertainty
    ISO 11979-3:2012 Ophthalmic implants — Intraocular lenses — Part 3: Mechanical properties and test methods
    BS EN 14939:2006 Copper and copper alloys. Determination of beryllium content. FAAS Method
    BS EN 14662-2:2005 Ambient air quality. Standard method for measurement of benzene concentrations Pumped sampling followed by solvent desorption and gas chromatography
    BS EN 61223-2-6:2007 Evaluation and routine testing in medical imaging departments Constancy tests. Imaging performance of computed tomography X-ray equipment
    BS EN ISO 10338:1998 Optics and optical instruments. Contact lenses. Determination of curvature
    ISO 20743:2013 Textiles Determination of antibacterial activity of textile products
    BS ISO 3724:2007 Hydraulic fluid power. Filter elements. Determination of resistance to flow fatigue using particulate contaminant
    BS EN 13657:2002 Characterization of waste. Digestion for subsequent determination of aqua regia soluble portion of elements
    UNE-CEN/TS 16011:2015 EX Plastics - Recycled plastics - Sample preparation
    BS EN ISO 15197:2015 In vitro diagnostic test systems. Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus
    EN 15915:2010 Copper and copper alloys - Determination of silver content - Flame atomic absorption spectrometric method (FAAS)
    EN 15690-2:2009 Copper and copper alloys - Determination of iron content - Part 2: Flame atomic absorption spectrometric method (FAAS)
    EN ISO 15796:2008 Gas analysis - Investigation and treatment of analytical bias (ISO 15796:2005)
    EN ISO 10012:2003 Measurement management systems - Requirements for measurement processes and measuring equipment (ISO 10012:2003)
    ONORM EN ISO 13468-2 : 2006 PLASTICS - DETERMINATION OF THE TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 2: DOUBLE-BEAM INSTRUMENT
    EN 14937-2:2006 Copper and copper alloys - Determination of antimony content - Part 2: FAAS method
    EN ISO 14556:2015 Metallic materials - Charpy V-notch pendulum impact test - Instrumented test method (ISO 14556:2015)
    EN 15022-3:2006 Copper and copper alloys - Determination of tin content - Part 3: Low tin content - Flame atomic absorption spectrometry method (FAAS)
    EN ISO 21570:2005/A1:2013 FOODSTUFFS - METHODS OF ANALYSIS FOR THE DETECTION OF GENETICALLY MODIFIED ORGANISMS AND DERIVED PRODUCTS - QUANTITATIVE NUCLEIC ACID BASED METHODS (ISO 21570:2005/AMD 1:2013)
    EN 14662-4:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 4: Diffusive sampling followed by thermal desorption and gas chromatography
    EN ISO 10338 : 1997 OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE
    EN 14939:2006 Copper and copper alloys - Determination of beryllium content - FAAS method
    EN ISO 20483:2013 Cereals and pulses - Determination of the nitrogen content and calculation of the crude protein content - Kjeldahl method (ISO 20483:2013)
    EN ISO 15193:2009 In vitro diagnostic medical devices - Measurement of quantities in samples of biological origin - Requirements for content and presentation of reference measurement procedures (ISO 15193:2009)
    EN 16117-2:2012 Copper and copper alloys - Determination of copper content - Part 2: Electrolytic determination of copper in materials with copper content higher than 99,80 %
    EN 14185-2:2006 Non fatty foods - Determination of N-methylcarbamate residues - Part 2: HPLC method with clean-up on a diatomaceous earth column
    EN ISO 27971:2015 Cereals and cereal products - Common wheat (Triticum aestivum L.) - Determination of alveograph properties of dough at constant hydration from commercial or test flours and test milling methodology (ISO 27971:2015)
    EN ISO 14111:1999 Natural gas - Guidelines to traceability in analysis (ISO 14111:1997)
    EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
    EN 16117-1:2011 Copper and copper alloys - Determination of copper content - Part 1: Electrolytic determination of copper in materials with copper content less than 99,85 %
    EN ISO 15350:2010 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000)
    EN 15703-2 : 2014 COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    EN 14936-2:2006 Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method
    EN 15062:2006 Adhesives for leather and footwear materials - Solvent-based and dispersion adhesives - Testing ageing of bonds under specified conditions
    EN 15428:2007 Soil improvers and growing media - Determination of particle size distribution
    EN ISO 11876:2010 Hardmetals - Determination of calcium, copper, iron, potassium, magnesium, manganese, sodium, nickel and zinc in cobalt metal powders - Flame atomic absorption spectrometric method (ISO 11876:2010)
    EN 14941:2006 Copper and copper alloys - Determination of cobalt content - FAAS method
    EN ISO 16638-1:2017 Radiological protection - Monitoring and internal dosimetry for specific materials - Part 1: Inhalation of uranium compounds (ISO 16638-1:2015)
    EN 14662-5 : 2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 5: Diffusive sampling followed by solvent desorption and gas chromatography
    EN 14662-2:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 2 : Pumped sampling followed by solvent desorption and gas chromatography
    EN 15916-2:2010 Copper and copper alloys - Determination of tellurium content - Part 2: Medium tellurium content - Flame atomic absorption spectrometric method (FAAS)
    EN 13657:2002 Characterization of waste - Digestion for subsequent determination of aqua regia soluble portion of elements
    EN 14936-1:2006 Copper and copper alloys - Determination of aluminium content - Part 1: Titrimetric method
    EN ISO 4934:2003 Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003)
    EN ISO 489:1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
    EN 14935:2006 Copper and copper alloys - Determination of impurities in pure copper - ET AAS method
    EN ISO 9913-2 : 2000 OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - PART 2 - DETERMINATION OF OXYGEN PERMEABILITY AND TRANSMISSIBILITY BY THE COULOMETRIC METHOD
    EN ISO 17718:2014 Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase (ISO 17718:2013)
    I.S. EN ISO 489:1999 PLASTICS - DETERMINATION OF REFRACTIVE INDEX
    EN ISO 7235:2009 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003)
    EN ISO 11609:2017 Dentistry - Dentifrices - Requirements, test methods and marking (ISO 11609:2017)
    EN ISO 20988:2007 Air quality - Guidelines for estimating measurement uncertainty (ISO 20988:2007)
    EN ISO 10720:2007 Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997)
    EN 14662-1:2005 Ambient air quality - Standard method for measurement of benzene concentrations - Part 1 : Pumped sampling followed by thermal desorption and gas chromatography
    EN 14942-2:2006 Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method
    EN ISO 13900:2002 Steel - Determination of boron content - Curcumin spectrophotometric method after distillation (ISO 13900:1997)
    EN ISO 520 : 2010 Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010)
    EN 14242:2004 Aluminium and aluminium alloys - Chemical analysis - Inductively coupled plasma optical emission spectral analysis
    EN ISO 13468-1:1996 PLASTICS - DETERMINATION OF TOTAL LUMINOUS TRANSMITTANCE OF TRANSPARENT MATERIALS - PART 1: SINGLE-BEAM INSTRUMENT
    EN 14940-2:2006 Copper and copper alloys - Determination of chromium content - Part 2: FAAS method
    EN ISO 17715:2014 Flour from wheat (Triticum aestivum L.) - Amperometric method for starch damage measurement (ISO 17715:2013)
    EN 15622:2010 Copper and copper alloys - Determination of lead content - Flame atomic absorption spectrometric method (FAAS)
    I.S. EN 15023-3:2010 COPPER AND COPPER ALLOYS - DETERMINATION OF NICKEL CONTENT - PART 3: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO 11462-1:2001 Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC
    DIN EN 14938-2:2010-12 Copper and copper alloys - Determination of bismuth content - Part 2: Flame atomic absorption spectrometric method (FAAS)
    DIN EN 15023-3:2010-12 Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometric method (FAAS)
    PD CEN/TS 16011:2013 Plastics. Recycled plastics. Sample preparation
    07/30163034 DC : 0 BS EN 14940-1 - COPPER AND COPPER ALLOYS - DETERMINATION OF CHROMIUM CONTENT - PART 1: TITRIMETRIC METHOD
    DIN EN 16117-2:2013-02 COPPER AND COPPER ALLOYS - DETERMINATION OF COPPER CONTENT - PART 2: ELECTROLYTIC DETERMINATION OF COPPER IN MATERIALS WITH COPPER CONTENT HIGHER THAN 99,80%
    02/101726 DC : 0 PREN 13036-2 - ROAD AND AIRFIELD SURFACE CHARACTERISTICS - TEST METHODS - PART 2: PROCEDURE FOR DETERMINATION OF SKID RESISTANCE OF A PAVEMENT SURFACE
    BS ISO 13899-2:2005 Steel. Determination of Mo, Nb and W contents in alloyed steel. Inductively coupled plasma atomic emission spectrometric method Determination of Nb Content
    DIN 53804-1:2002-04 STATISTICAL EVALUATION - PART 1: CONTINUOUS CHARACTERISTICS
    09/30203049 DC : 0 BS EN 10351 - CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF LOW ALLOYED STEELS - DETERMINATION OF MN, P, CU, NI, CR, MO, V, CO, AL (TOTAL) AND SN (ROUTINE METHOD)
    BS ISO 15350 : 2001 DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACES (ROUTINE METHOD)
    I.S. EN ISO 4934:2004 STEEL AND IRON - DETERMINATION OF SULFUR CONTENT - GRAVIMETRIC METHOD
    I.S. CWA 15261-2:2005 MEASUREMENT UNCERTAINTIES IN MECHANICAL TESTS ON METALLIC MATERIALS - PART 2: THE EVALUATION OF UNCERTAINTIES IN TENSILE TESTING
    DIN EN ISO 17715:2015-03 FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - AMPEROMETRIC METHOD FOR STARCH DAMAGE MEASUREMENT (ISO 17715:2013)
    BS EN ISO 17718:2014 Wholemeal and flour from wheat (Triticum aestivum L.). Determination of rheological behaviour as a function of mixing and temperature increase
    97/402028 DC : DRAFT FEB 1997 BS ISO 11648-0 - STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIAL - PART 0: GENERAL INTRODUCTION
    BS ISO 18632:2010 Alloyed steel. Determination of manganese. Potentiometric and visual titration method
    17/30335786 DC : 0 BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY
    04/30124942 DC : DRAFT NOV 2004 BS EN 61223-2-6 - EVALUATION AND ROUTINE TESTING IN MEDICAL IMAGING DEPARTMENTS - PART 2-6: CONSTANCY TESTS - X-RAY EQUIPMENT FOR COMPUTED TOMOGRAPHY
    UNI ISO/TR 22971 : 2008 ACCURACY (TRUENESS AND PRECISION) OF MEASUREMENT METHODS AND RESULTS - PRACTICAL GUIDANCE FOR THE USE OF ISO 5725-2:1994 IN DESIGNING, IMPLEMENTING AND STATISTICALLY ANALYSING INTER-LABORATORY REPEATABILITY AND REPRODUCIBILITY RESULTS
    13/30291170 DC : 0 BS EN 10361 - ALLOYED STEELS - DETERMINATION OF NICKEL CONTENT - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC METHOD
    BS 7208-7(1998) : 1998 OPTICS AND OPTICAL INSTRUMENTS - CONTACT LENSES - DETERMINATION OF CURVATURE
    ISO 5725-2:1994 Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method
    DIN EN 15703-2:2015-03 COPPER AND COPPER ALLOYS - DETERMINATION OF MANGANESE CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS ISO 10725:2000 Acceptance sampling plans and procedures for the inspection of bulk materials
    04/30098572 DC : DRAFT NOV 2004 EN 12441-11 - ZINC AND ZINC ALLOYS - CHEMICAL ANALYSIS - PART 11: DETERMINATION OF SILICON IN ZINC ALLOYS - SPECTROPHOTOMETRIC METHOD
    DIN EN ISO 18113-1:2013-01 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS (ISO 18113-1:2009)
    BS ISO 14707:2015 Surface chemical analysis. Glow discharge optical emission spectrometry (GD-OES). Introduction to use
    PD CEN/TR 10353:2011 Chemical analysis of ferrous materials. Analysis of ferro-silicon. Determination of Al, Ti and P by inductively coupled plasma optical emission spectrometry
    BS ISO 17593:2007 Clinical laboratory testing and in vitro medical devices. Requirements for in vitro monitoring systems for self-testing of oral anticoagulant therapy
    BS 6200-3.22.4(1997) : 1997 SAMPLING AND ANALYSIS OF IRON, STEEL AND OTHER FERROUS METALS - METHODS OF ANALYSIS - DETERMINATION OF NITROGEN - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS
    BS EN ISO 18113-1:2011 In vitro diagnostic medical devices. Information supplied by the manufacturer (labelling) Terms, definitions and general requirements
    05/30057945 DC : DRAFT APR 2005 BS ISO 13528 - STATISTICAL METHODS FOR USE IN PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS
    ISO/TS 13899-3:2005 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 3: Determination of W content
    BS EN 12014-2:2017 Foodstuffs. Determination of nitrate and/or nitrite content HPLC/IC method for the determination of nitrate content of vegetables and vegetable products
    DD ISO/TS 21749:2005 Measurement and uncertainty for metrological applications. Repeated measurements and nested experiments
    ISO 11877:2008 Hardmetals — Determination of silicon in cobalt metal powders — Photometric method
    DIN EN ISO 17718:2015-03 Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase (ISO 17718:2013)
    DIN EN ISO 15350:2010-08 Steel and iron - Determination of total carbon and sulfur content - Infrared absorption method after combustion in an induction furnace (routine method) (ISO 15350:2000)
    BS ISO 19983:2017 Rubber. Determination of precision of test methods
    BS EN 15023-3:2010 Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometric method (FAAS)
    DD CEN/TS 15023-3:2006 Copper and copper alloys. Determination of nickel content Flame atomic absorption spectrometry method (FAAS)
    11/30244578 DC : DRAFT JUNE 2011 BS EN 15616 - COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    BS EN 15916-2:2010 Copper and copper alloys. Determination of tellurium content Medium tellurium content. Flame atomic absorption spectrometric method (FAAS)
    BS EN ISO 520:2010 Cereals and pulses. Determination of the mass of 1000 grains
    I.S. EN ISO 17715:2014 FLOUR FROM WHEAT (TRITICUM AESTIVUM L.) - AMPEROMETRIC METHOD FOR STARCH DAMAGE MEASUREMENT (ISO 17715:2013)
    BS EN ISO 15350:2010 Steel and iron. Determination of total carbon and sulfur content. Infrared absorption method after combustion in an induction furnace (routine method)
    BS 6200-3.31.3:2002 Sampling and analysis of iron, steel and other ferrous metals. Methods of analysis. Determination of tin Flame atomic absorption spectrometric method (extraction as Sn-SCN)
    ISO 22033:2011 Nickel alloys Determination of niobium Inductively coupled plasma/atomic emission spectrometric method
    16/30339666 DC : 0 BS EN ISO 11609 - DENTISTRY - DENTIFRICES - REQUIREMENTS, TEST METHODS AND MARKING
    PD ISO GUIDE 33:2015 Reference materials. Good practice in using reference materials
    CSA ISO 10012 : 2003 : R2013 MEASUREMENT MANAGEMENT SYSTEMS - REQUIREMENTS FOR MEASUREMENT PROCESSES AND MEASURING EQUIPMENT
    CSA ISO/TR 10017:2003 GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000
    INCITS/ISO TS 19159-1 : 2015 GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS
    UNE-EN 10361:2016 Alloyed steels - Determination of nickel content - Inductively coupled plasma optical emission spectrometric method
    07/30163942 DC : 0 BS EN 15690-2 - COPPER AND COPPER ALLOYS - DETERMINATION OF IRON CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRY METHOD (FAAS)
    BS 3156-11.0.3(1997) : 1997 AMD 10655 ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS
    ISO 17925:2004 Zinc and/or aluminium based coatings on steel — Determination of coating mass per unit area and chemical composition — Gravimetry, inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
    BS EN ISO 7971-3:2009 Cereals. Determination of bulk density, called mass per hectolitre Routine method
    NF ISO 27048 : 2011 RADIATION PROTECTION - DOSE ASSESSMENT FOR THE MONITORING OF WORKERS FOR INTERNAL RADIATION EXPOSURE
    UNE-EN 16192:2012 Characterization of waste - Analysis of eluates
    CEI EN 61620 : 1999 INSULATING LIQUIDS DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHOD
    NF EN 61620 : 1999 INSULATING LIQUIDS - DETERMINATION OF THE DIELECTRIC DISSIPATION FACTOR BY MEASUREMENT OF THE CONDUCTANCE AND CAPACITANCE - TEST METHODS
    I.S. EN 15622:2010 COPPER AND COPPER ALLOYS - DETERMINATION OF LEAD CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    I.S. EN 10355:2013 CHEMICAL ANALYSIS OF FERROUS MATERIALS - INDUCTIVELY COUPLED PLASMA OPTICAL EMISSION SPECTROMETRIC ANALYSIS OF UNALLOYED AND LOW ALLOYED STEELS - DETERMINATION OF SI, MN, P, CU, NI, CR, MO AND SN, FOLLOWING DISSOLUTION WITH NITRIC AND SULPHURIC ACIDS [ROUTINE METHOD]
    PREN 15616 : DRAFT 2011 COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    S.R. CEN/TR 10354:2011 CHEMICAL ANALYSIS OF FERROUS MATERIALS - ANALYSIS OF FERRO-SILICON - DETERMINATION OF SI AND AL BY X-RAY FLUORESCENCE SPECTROMETRY
    UNE-EN 15022-4:2012 Copper and copper alloys - Determination of tin content - Part 4: Medium tin content - Flame atomic absorption spectrometric method (FAAS)
    I.S. EN 15616:2012 COPPER AND COPPER ALLOYS - DETERMINATION OF CADMIUM CONTENT - FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO Guide 33:2015 Reference materials Good practice in using reference materials
    DIN EN ISO 15112:2014-09 Natural gas - Energy determination (ISO 15112: 2011)
    UNI EN ISO 15112 : 2014 NATURAL GAS - ENERGY DETERMINATION
    ISO/TS 19036:2006 Microbiology of food and animal feeding stuffs Guidelines for the estimation of measurement uncertainty for quantitative determinations
    ISO 13528:2015 Statistical methods for use in proficiency testing by interlaboratory comparison
    ISO 11652:1997 Steel and iron Determination of cobalt content Flame atomic absorption spectrometric method
    NF EN ISO 15350 : 2010 STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD)
    ISO 18369-1:2017 Ophthalmic optics — Contact lenses — Part 1: Vocabulary, classification system and recommendations for labelling specifications
    ISO 13933:2014 Steel and iron Determination of calcium and magnesium Inductively coupled plasma atomic emission spectrometric method
    CEN/TR 10345:2013 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods
    ISO/TS 19159-1:2014 Geographic information Calibration and validation of remote sensing imagery sensors and data Part 1: Optical sensors
    ISO 27048:2011 Radiation protection Dose assessment for the monitoring of workers for internal radiation exposure
    ISO 7971-3:2009 Cereals Determination of bulk density, called mass per hectolitre Part 3: Routine method
    I.S. EN ISO 15350:2010 STEEL AND IRON - DETERMINATION OF TOTAL CARBON AND SULFUR CONTENT - INFRARED ABSORPTION METHOD AFTER COMBUSTION IN AN INDUCTION FURNACE (ROUTINE METHOD)
    UNI EN ISO 18113-1 : 2012 IN VITRO DIAGNOSTIC MEDICAL DEVICES - INFORMATION SUPPLIED BY THE MANUFACTURER (LABELLING) - PART 1: TERMS, DEFINITIONS AND GENERAL REQUIREMENTS
    PREN ISO 15197 : DRAFT 2011 IN VITRO DIAGNOSTIC TEST SYSTEMS - REQUIREMENTS FOR BLOOD-GLUCOSE MONITORING SYSTEMS FOR SELF-TESTING IN MANAGING DIABETES MELLITUS
    ISO/TS 13899-1:2004 Steel — Determination of Mo, Nb and W contents in alloyed steel — Inductively coupled plasma atomic emission spectrometric method — Part 1: Determination of Mo content
    UNI EN 16192 : 2012 CHARACTERIZATION OF WASTE - ANALYSIS OF ELUATES
    EN ISO 13843:2017 Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017)
    EN 15024-2:2018 Copper and copper alloys - Determination of zinc content - Part 2: Flame atomic absorption spectrometric method (FAAS)
    UNI EN ISO 7971-3 : 2009 CEREALS - DETERMINATION OF BULK DENSITY, CALLED MASS PER HECTOLITRE - PART 3: ROUTINE METHOD
    ISO 15112:2011 Natural gas Energy determination
    I.S. EN ISO 10720:2007 STEEL AND IRON - DETERMINATION OF NITROGEN CONTENT - THERMAL CONDUCTIMETRIC METHOD AFTER FUSION IN A CURRENT OF INERT GAS
    BS EN 60456:2016 Clothes washing machines for household use. Methods for measuring the performance
    I.S. EN ISO 27971:2015 CEREALS AND CEREAL PRODUCTS - COMMON WHEAT (TRITICUM AESTIVUM L.) - DETERMINATION OF ALVEOGRAPH PROPERTIES OF DOUGH AT CONSTANT HYDRATION FROM COMMERCIAL OR TEST FLOURS AND TEST MILLING METHODOLOGY (ISO 27971:2015)
    ISO/TR 10017:2003 Guidance on statistical techniques for ISO 9001:2000
    ISO 16918-1:2009 Steel and iron Determination of nine elements by the inductively coupled plasma mass spectrometric method Part 1: Determination of tin, antimony, cerium, lead and bismuth
    ISO 8178-2:2008 Reciprocating internal combustion engines Exhaust emission measurement Part 2: Measurement of gaseous and particulate exhaust emissions under field conditions
    ISO 17058:2004 Steel and iron — Determination of arsenic content — Spectrophotometric method
    ISO 14782:1999 Plastics Determination of haze for transparent materials
    I.S. EN 14938-2:2010 COPPER AND COPPER ALLOYS - DETERMINATION OF BISMUTH CONTENT - PART 2: FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD (FAAS)
    ISO 13898-4:1997 Steel and iron Determination of nickel, copper and cobalt contents Inductively coupled plasma atomic emission spectrometric method Part 4: Determination of cobalt content
    DIN EN 14936-2:2006-09 Copper and copper alloys - Determination of aluminium content - Part 2: FAAS method
    DIN EN 14937-1:2006-09 Copper and copper alloys - Determination of antimony content - Part 1: Spectrophotometric method
    DIN EN 14937-2:2006-09 Copper and copper alloys - Determination of antimony content - Part 2: FAAS method
    DIN EN ISO 15349-2:2003-09 Unalloyed steel - Determination of low carbon content - Part 2: Infrared absorption method after combustion in an induction furnace (with preheating) (ISO 15349-2:1999)
    DIN EN 14940-2:2006-09 Copper and copper alloys - Determination of chromium content - Part 2: FAAS method
    DIN EN 14942-2:2006-09 Copper and copper alloys - Determination of arsenic content - Part 2: FAAS method
    BS EN 13656:2002 Characterization of waste. Microwave assisted digestion with hydrofluoric (HF), nitric (HNO3), and hydrochloric (HCl) acid mixture for subsequent determination of elements
    UNE-EN ISO 15197:2015 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013)
    ISO 10012:2003 Measurement management systems — Requirements for measurement processes and measuring equipment
    ISO 3724:2007 Hydraulic fluid power — Filter elements — Determination of resistance to flow fatigue using particulate contaminant
    BS EN 14936-2:2006 Copper and copper alloys. Determination of aluminium content FAAS method
    BS EN 12286:1999 In vitro diagnostic medical devices. Measurement of quantities in samples of biological origin. Presentation of reference measurement procedures
    BS EN ISO 10012:2003 Measurement management systems. Requirements for measurement processes and measuring equipment
    BS EN 14935:2006 Copper and copper alloys. Determination of impurities in pure copper. ETA-AAS method
    BS EN 12441-8:2004 Zinc and zinc alloys. Chemical analysis Detection of tin in secondary zinc. Flame atomic absorption spectrometric method
    ISO 15349-2:1999 Unalloyed steel Determination of low carbon content Part 2: Infrared absorption method after combustion in an induction furnace (with preheating)
    BS EN 14936-1:2006 Copper and copper alloys. Determination of aluminium content Titrimetric method
    BS EN 12441-11:2006 Zinc and zinc alloys. Chemical analysis Determination of silicon in zinc alloys. Spectrophotometric method
    EN 61223-2-6:2007 Evaluation and routine testing in medical imaging departments - Part 2-6: Constancy tests - Imaging performance of computed tomography X-ray equipment
    CEN/TS 15916-1:2011 Copper and copper alloys - Determination of tellurium content - Part 1: Low tellurium content - Flame atomic absorption spectrometric method (FAAS)
    DIN EN 14662-4:2005-08 AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 4: DIFFUSIVE SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY
    CEN/TS 16011:2013 Plastics - Recycled plastics - Sample preparation
    EN 13040:2007 Soil improvers and growing media - Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory compacted bulk density
    CEN/TS 15023-3:2006 Copper and copper alloys - Determination of nickel content - Part 3: Flame atomic absorption spectrometry method (FAAS)
    EN 13370:2003 Characterization of waste - Analysis of eluates - Determination of Ammonium, AOX, conductivity, Hg, phenol index, TOC, easily liberatable CN-, F-
    EN 12441-7:2004 Zinc and zinc alloys - Chemical analysis - Part 7: Determination of tin - Flame atomic absorption spectrometric method after extraction
    DIN EN 14662-1:2005-08 AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 1:PUMPED SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY
    EN 61223-3-5:2004 Evaluation and routine testing in medical imaging departments - Part 3-5: Acceptance tests - Imaging performance of computed tomography X-ray equipment
    DIN EN ISO 4934:2004-05 Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003)
    EN 12441-11:2006 Zinc and zinc alloys - Chemical analysis - Part 11: Determination of silicon in zinc alloys - Spectrophotometric method
    EN 15616:2012 Copper and copper alloys - Determination of cadmium content - Flame atomic absorption spectrometric method (FAAS)
    CEN/TS 14938-2:2006 Copper and copper alloys - Determination of bismuth content - Part 2: FAAS method
    DIN EN ISO 20988:2007-09 AIR QUALITY - GUIDELINES FOR ESTIMATING MEASUREMENT UNCERTAINTY
    EN 15025:2010 Copper and copper alloys - Determination of magnesium content - Flame atomic absorption spectrometric method (FAAS)
    EN 12697-38:2004 Bituminous mixtures - Test methods for hot mix asphalt - Part 38: Common equipment and calibration
    DIN EN 10184:2006-05 Chemical analysis of ferrous materials - Determination of phosphorus in non-alloyed steels and irons - Molybdenum blue spectrophotometric method
    DIN EN 14662-5:2005-08 AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 5: DIFFUSIVE SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY
    EN 16192:2011 Characterization of waste - Analysis of eluates
    DIN EN 14935:2006-09 Copper and copper alloys - Determination of impurities in pure copper - ET AAS method
    DIN EN 10318:2005-08 Determination of thickness and chemical composition of zinc- and aluminium-based metallic coatings - Routine method; German version EN 10318:2005
    DIN EN 14662-2:2005-08 AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 2:PUMPED SAMPLING FOLLOWED BY SOLVENT DESORPTION AND GAS CHROMATOGRAPHY
    EN 15605:2010 Copper and copper alloys - Inductively coupled plasma optical emission spectrometry
    EN 61620:1999 Insulating liquids - Determination of the dielectric dissipation factor by measurement of the conductance and capacitance - Test method
    I.S. EN 14662-1:2005 AMBIENT AIR QUALITY - STANDARD METHOD FOR MEASUREMENT OF BENZENE CONCENTRATIONS - PART 1: PUMPED SAMPLING FOLLOWED BY THERMAL DESORPTION AND GAS CHROMATOGRAPHY

    Standards Referencing This Book - (Show below) - (Hide below)

    AS 5339:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering/survey methods for use in situ in a reverberant environment
    AS 5337:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Survey method using an enveloping measurement surface over a reflecting plane
    AS/NZS ISO 19116:2020 Geographic information - Positioning services
    AS 5336:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Precision methods for anechoic rooms and hemi - anechoic rooms
    AS 5335:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for an essentially free field over a reflecting plane
    ISO 5725-6:1994 Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values
    ISO 5725-4:1994 Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method
    AS 5006.2:2019 Silver and silver bearing alloys Determination of silver content (0.1 % to 99.9 %) - Gravimetric (fire assay) method
    AS 5333.1:2019 Acoustics - Determination of sound power levels and sound energy levels of noise sources using sound pressure - Engineering methods for small movable sources in reverberant fields Comparison method for a hard-walled test room
    ISO 3534-2:1993 Statistics — Vocabulary and symbols — Part 2: Statistical quality control
    SA/SNZ TS 61724.2:2020 Photovoltaic system performance Capacity evaluation method (IEC TS 61724-2:2016, MOD)
    SA/SNZ TS 61724.3:2020 Photovoltaic system performance Energy evaluation method (IEC TS 61724-3:2016, MOD)
    AS 3515.2:2019 Gold and gold bearing alloys Determination of gold content (30 % to 99.5 %) - Gravimetric (fire assay) method
    AS 5333.2:2019 Acoustics - Determination of sound power levels of noise sources using sound pressure - Engineering methods for small, movable sources in reverberant fields Methods for special reverberation test rooms
    ISO 5725-5:1998 Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method
    AS 5332:2019 Acoustics - Determination of sound power levels of noise sources - Guidelines for the use of basic standards
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective