BS 2000-519(2016) : 2016
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
BS ISO 5603:2017
|
Rubber, vulcanized. Determination of adhesion to wire cord |
BS ISO 4433-1:1997
|
Thermoplastic pipes. Resistance to liquid chemicals. Classification Immersion test method |
BS ISO 4647:2010
|
Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test |
07/30083514 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 1: Trouser, angle and crescent test pieces |
BS ISO 15024:2001
|
Fibre-reinforced plastic composites. Determination of mode I interlaminar fracture toughness, Gic, for unidirectionally reinforced materials |
BS EN 16556:2014
|
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
DIN EN ISO 20795-2:2013-06
|
DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
DIN EN 16556 E : 2015
|
DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
DIN EN 15870 E : 2009
|
ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
11/30245835 DC : 0
|
BS EN 302-1 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
ISO 12817:2013
|
Fibre-reinforced plastic composites — Determination of open-hole compression strength |
BS ISO 5600:2017
|
Rubber. Determination of adhesion to rigid materials using conical shaped parts |
BS ISO 37:2017
|
Rubber, vulcanized or thermoplastic. Determination of tensile stress-strain properties |
PREN 302-4 : DRAFT 2011
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
BS ISO 18352:2009
|
Carbon-fibre-reinforced plastics. Determination of compression-after-impact properties at a specified impact-energy level |
09/30193382 DC : 0
|
BS ISO 4647 - RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
15/30318244 DC : 0
|
BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
BS ISO 13586 : 2000
|
PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (G[IC] AND K[IC]) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
04/30091794 DC : DRAFT FEB 2004
|
ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
12/30266398 DC : 0
|
BS EN ISO 20795-2 - DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
15/30317333 DC : 0
|
BS EN 205 - ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
06/30149355 DC : 0
|
EN ISO 1798 - FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF TENSILE STRENGTH AND ELONGATION AT BREAK |
BS EN 14840:2005
|
Joint fillers and sealants. Test methods for preformed joint seals |
BS ISO 814:2017
|
Rubber, vulcanized or thermoplastic. Determination of adhesion to metal. Two-plate method |
NF ISO 4647 : 2010
|
RUBBER, VULCANIZED - DETERMINATION OF STATIC ADHESION TO TEXTILE CORD - H-PULL TEST |
ISO 37:2017
|
Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties |
PREN 3793 : 200P1
|
AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF STATIC SHEAR STRENGTH |
PREN 3794 : 200P1
|
AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS |
ISO 13262:2010
|
Thermoplastics piping systems for non-pressure underground drainage and sewerage Thermoplastics spirally-formed structured-wall pipes Determination of the tensile strength of a seam |
EN ISO 2411:2017
|
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
ISO 36:2017
|
Rubber, vulcanized or thermoplastic Determination of adhesion to textile fabrics |
ISO 814:2017
|
Rubber, vulcanized or thermoplastic Determination of adhesion to metal Two-plate method |
ISO 6605:2017
|
Hydraulic fluid power — Test methods for hoses and hose assemblies |
ISO 21809-3:2016
|
Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
DIN EN 13587:2010-10
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
DIN EN ISO 9513 E : 2013
|
METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012 + COR 1:2013) |
IEC 62011-2:2004
|
Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
UNE-EN ISO 6259-1:2015
|
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
BS EN ISO 8033:2017
|
Rubber and plastics hoses. Determination of adhesion between components |
UNE-EN ISO 11339:2010
|
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
BS EN ISO 604:2003
|
Plastics. Determination of compressive properties |
BS EN 15416-5:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of minimum pressing time under referenced conditions |
BS EN 12743:1999
|
Footwear. Test methods for outsoles. Compression energy |
UNE-EN 205:2016
|
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
BS EN 302-3:2017
|
Adhesives for load-bearing timber structures. Test methods Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
BS EN 12637-1:2004
|
Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products Compatibility with concrete |
EN 12814-6:2000
|
Testing of welded joints of thermoplastics semi-finished products - Part 6: Low temperature tensile test |
DIN EN 13706-2:2003-02
|
REINFORCED PLASTICS COMPOSITES - SPECIFICATIONS FOR PULTRUDED PROFILES - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
EN 12744 : 1999
|
FOOTWEAR - TEST METHODS FOR INSOLES - DELAMINATION RESISTANCE |
EN 62011-2:2004
|
Insulating materials - Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes - Part 2: Methods of test |
EN 12637-1:2004
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
EN ISO 9513:2012/AC:2013
|
Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013) |
EN 12814-1:1999/AC:2003
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 1: BEND TEST |
EN 13587:2016
|
Bitumen and bituminous binders - Determination of the tensile properties of bituminous binders by the tensile test method |
EN 12743:1999/AC:2001
|
FOOTWEAR - TEST METHODS FOR OUTSOLES - COMPRESSION ENERGY |
ONORM EN 302-6 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
ONORM EN 302-4 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
ONORM EN 302-1 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
PREN 302-6 : DRAFT 2011
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
BS 2782-11.1110C(1999) : 1999
|
PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM |
11/30245841 DC : 0
|
BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
ISO 4433-1:1997
|
Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 1: Immersion test method |
14/30285784 DC : 0
|
BS EN 16730 - RAILWAY APPLICATIONS - TRACK - CONCRETE SLEEPERS AND BEARERS WITH UNDER SLEEPER PADS |
UNE-ISO 4664-1:2011
|
Rubber, vulcanised or thermoplastic. Determination of dynamic properties. Parte 1: General guidance |
16/30340787 DC : 0
|
BS ISO 13586 - PLASTICS - DETERMINATION OF FRACTURE TOUGHNESS (GIC AND KIC) - LINEAR ELASTIC FRACTURE MECHANICS (LEFM) APPROACH |
UNE-ISO 37:2013
|
Rubber, vulcanised or thermoplastic. Determination of tensile stress-strain properties |
07/30162647 DC : 0
|
BS ISO 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
ISO 20867:2018
|
Footwear — Test methods for insoles — Heel pin holding strength |
EN IEC 61730-2:2018/AC:2018-06
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING (IEC 61730-2:2016) |
PREN 15416-5 : DRAFT 2015
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
ISO 18352:2009
|
Carbon-fibre-reinforced plastics Determination of compression-after-impact properties at a specified impact-energy level |
09/30196780 DC : DRAFT JAN 2009
|
BS ISO 12493 - RUBBER, VULCANIZED - DETERMINATION OF STRESS IN TENSION ON HEATING |
ISO 15114:2014
|
Fibre-reinforced plastic composites Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
BS EN ISO 2411:2017
|
Rubber- or plastics-coated fabrics. Determination of coating adhesion |
DIN EN 16556:2015-01
|
DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
PREN 302-1 : DRAFT 2011
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
17/30342172 DC : 0
|
BS ISO 20975-2 - CARBON-FIBRE-REINFORCED PLASTICS - METHODS FOR MEASUREMENT OF THROUGH-THICKNESS LAMINATE PROPERTIES - PART 2: CONSIDERING SIZE EFFECTS BY FLEXURAL TEST |
07/30175034 DC : DRAFT DEC 2007
|
BS ISO 18352 - CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT ENERGY LEVEL |
NF ISO 36 : 2017
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO TEXTILE FABRICS |
BS 5173-103.1(1986) : 1986
|
METHODS OF TEST FOR RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES - PHYSICAL TESTS - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
14/30304385 DC : 0
|
BS ISO 34-2 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 2: SMALL (DELFT) TEST PIECES |
BS ISO 6914:2013
|
Rubber, vulcanized or thermoplastic. Determination of ageing characteristics by measurement of stress relaxation in tension |
09/30193376 DC : 0
|
BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
15/30317687 DC : 0
|
BS EN ISO 8033 - RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS |
11/30245844 DC : 0
|
BS EN 302-4 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
BS ISO 19210:2017
|
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
BS 903-A3.3.2(1997) : 1997
|
PHYSICAL TESTING OF RUBBER - DETERMINATION OF TEAR STRENGTH - SMALL (DELFT) TEST PIECES |
10/30167702 DC : 0
|
BS ISO 4635 - RUBBER, VULCANIZED - PREFORMED JOINT SEALS FOR USE BETWEEN CONCRETE HIGHWAY PAVING SECTIONS - SPECIFICATION |
BIS IS 3400-1 : 2012
|
METHODS OF TEST FOR VULCANIZED RUBBER - PART 1: DETERMINATION OF TENSILE STRESS-STRAIN PROPERTIES |
BS 903-A21.21.1(1997) : 1997
|
PHYSICAL TESTING OF RUBBER - DETERMINATION OF RUBBER TO METAL BOND STRENGTH - ADHESION TO RIGID SUBSTRATES - 90 DEGREE PEEL METHOD |
PREN 15416-4 : DRAFT 2015
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
09/30198121 DC : 0
|
BS ISO 13262 - THERMOPLASTICS PIPING SYSTEMS FOR NON PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SPIRALLY-FORMED STRUCTURES-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM |
BS ISO 4664:1998
|
Rubber. Guide to the determination of dynamic properties |
ISO 6916-2:2001
|
Flexible cellular polymeric materials Sponge and expanded cellular rubber products Specification Part 2: Mouldings and extrusions |
UNE-EN ISO 20795-2:2013
|
Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
I.S. EN ISO 13262:2017
|
THERMOPLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE - THERMOPLASTICS SPIRALLY-FORMED STRUCTURED-WALL PIPES - DETERMINATION OF THE TENSILE STRENGTH OF A SEAM (ISO 13262:2010) |
UNI EN 15870 : 2009
|
ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
ISO 19213:2017
|
Implants for surgery — Test methods of material for use as a cortical bone model |
15/30319712 DC : 0
|
BS EN 1279-4 - GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
I.S. EN ISO 2411:2017
|
RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION (ISO 2411:2017) |
ISO 12493:2017
|
Rubber, vulcanized — Determination of stress in tension upon heating |
IEC 61730-2:2016
|
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
ISO 15108:1998
|
Adhesives Determination of strength of bonded joints using a bending-shear method |
DIN EN ISO 4074:2016-05
|
NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
DIN EN 15416-5:2015-06 (Draft)
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
DIN EN 302-1:2013-06
|
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
DIN EN ISO 9513:2013-05
|
Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012 + Cor. 1:2013) |
DIN EN 15416-4:2015-06 (Draft)
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
BS EN 1979:1999
|
Plastics piping and ducting systems. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
UNE-EN ISO 8033:2017
|
Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
BS EN 12745:1999
|
Footwear. Test methods for insoles. Pin holding strength |
BS EN ISO 14125 : 1998
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
BS EN ISO 14129:1998
|
Fibre-reinforced plastic composites. Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength by the ± 45° tension test method |
ISO 15310:1999
|
Fibre-reinforced plastic composites Determination of the in-plane shear modulus by the plate twist method |
BS EN 12814-6:2000
|
Testing of welded joints of thermoplastics semi-finished products Low temperature tensile test |
DIN EN ISO 6259-1:2002-02
|
THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
I.S. EN 205:2016
|
ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
DIN EN 13587:2017-02
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
I.S. EN ISO 11339:2010
|
ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO-FLEXIBLE BONDED ASSEMBLIES |
DIN EN ISO 11339:2010-06
|
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
I.S. EN 302-4:2013
|
ADHESIVE FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
I.S. EN 302-1:2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
I.S. EN ISO 4074:2015
|
NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS (ISO 4074:2015) |
I.S. EN 13587:2016
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
I.S. EN ISO 9513:2012
|
METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING (ISO 9513:2012) |
I.S. EN 302-3:2017
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
I.S. EN 15416-4:2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME FOR ONE COMPONENT POLYURETHANE ADHESIVES |
I.S. EN ISO 6259-1:2015
|
THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD (ISO 6259-1:2015) |
I.S. EN ISO 604:2003
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
I.S. EN 302-6:2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
I.S. EN 12814-2:2000
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
DIN 53504:2009-10
|
TESTING OF RUBBER - DETERMINATION OF TENSILE STRENGTH AT BREAK, TENSILE STRESS AT YIELD, ELONGATION AT BREAK AND STRESS VALUES IN A TENSILE TEST |
I.S. EN ISO 8033:2017
|
RUBBER AND PLASTICS HOSES - DETERMINATION OF ADHESION BETWEEN COMPONENTS (ISO 8033:2016) |
EN 12814-2:2000
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
I.S. EN 15416-5:2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF CONVENTIONAL PRESSING TIME |
BS 903-A12(1999) : 1999
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO TEXTILE FABRIC |
BS 903-A12:1995
|
Physical testing of rubber Method for determination of the adhesion strength to textile fabric |
DIN EN 15416-4:2017-05
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
DIN EN 15416-5:2017-05
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
BS 903-A3:1995
|
Physical testing of rubber Method for determination of tear strength (trouser, angle and crescent test pieces) |
BS 903-A4:1990
|
Physical testing of rubber Determination of compression stress-strain properties |
BS 903-A61(2000) : 2000 AMD 13431
|
RUBBER - DETERMINATION OF FRICTIONAL PROPERTIES |
NBR 15708-5 : 2011
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PULTRUDED SHAPES - PART 5: STRUCTURAL SHAPES |
DIN 18035-7:2014-10
|
SPORTS GROUNDS - PART 7: SYNTHETIC TURF AREAS |
02/122388 DC : DRAFT JUN 2002
|
ISO/DIS 7743 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
ISO 19210:2017
|
Adhesives — Wood adhesives for non-structural applications — Determination of tensile shear strength of lap joints |
I.S. EN ISO 20795-2:2013
|
DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO 20795-2:2013) |
ISO 2411:2017
|
Rubber- or plastics-coated fabrics — Determination of coating adhesion |
EN ISO 13262:2017
|
Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam (ISO 13262:2010) |
14/30304382 DC : 0
|
BS ISO 34-1 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES |
DIN ISO 18352:2017-11
|
CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009) |
BS ISO 6605:2017
|
Hydraulic fluid power. Test methods for hoses and hose assemblies |
UNE-ISO 34-2:2011
|
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces |
03/112850 DC : DRAFT SEP 2003
|
ISO 4664 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DYNAMIC PROPERTIES - GENERAL CONSIDERATIONS |
BS 2782-11.1161A(1998) : 1998
|
METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTINGS AND VALVES - THERMOPLASTICS PIPES - RESISTANCE TO LIQUID CHEMICALS - CLASSIFICATION - IMMERSION TEST METHOD |
16/30315352 DC : 0
|
BS ISO 19210 - ADHESIVES - THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
BS EN ISO 20795-2:2013
|
Dentistry. Base polymers Orthodontic base polymers |
PREN 1279-4 : DRAFT 2015
|
GLASS IN BUILDING - INSULATING GLASS UNITS - PART 4: METHODS OF TEST FOR THE PHYSICAL ATTRIBUTES OF EDGE SEAL COMPONENTS AND INSERTS |
BS 2000-519(2010) : 2010
|
BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
DIN ISO 1827:2010-07
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
PREN 12814-4 : DRAFT 2016
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
02/122445 DC : DRAFT JUN 2002
|
ISO/DIS 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION |
09/30193379 DC : DRAFT FEB 2009
|
BS ISO 813 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO A RIGID SUBSTRATE - 90 DEGREES PEEL METHOD |
BS ISO 7743:2017
|
Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
ISO 34-2:2015
|
Rubber, vulcanized or thermoplastic Determination of tear strength Part 2: Small (Delft) test pieces |
03/105598 DC : DRAFT MAY 2003
|
BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
BS ISO 15310 : 1999 AMD 15944
|
REINFORCED PLASTICS - DETERMINATION OF THE IN-PLANE SHEAR MODULUS BY THE PLATE TWIST METHOD |
16/30341216 DC : 0
|
BS EN 12814-4 - TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
BS ISO 6916-1:1995
|
Flexible cellular polymeric materials. Sponge and expanded cellular rubber products. Specification Sheeting |
CEI EN 62011-2 : 2005
|
INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST |
ISO 5603:2017
|
Rubber, vulcanized — Determination of adhesion to wire cord |
BS ISO 15113:2005
|
Rubber. Determination of frictional properties |
BS ISO 18899:2013
|
Rubber. Guide to the calibration of test equipment |
DIN ISO 34-1:2016-09
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TEAR STRENGTH - PART 1: TROUSER, ANGLE AND CRESCENT TEST PIECES (ISO 34-1:2015) |
BS 2000-519(2003) : 2003
|
METHODS OF TEST FOR PETROLEUM AND ITS PRODUCTS - BS 2000-519: BITUMEN AND BITUMINOUS BINDERS - DETERMINATION OF THE TENSILE PROPERTIES OF BITUMINOUS BINDERS BY THE TENSILE TEST METHOD |
BS EN 14257:2006
|
Adhesives. Wood adhesives. Determination of tensile strength of lap joints at elevated temperature (WATT \'91) |
UNE-EN ISO 2411:2018
|
Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) |
I.S. EN 15870:2009
|
ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
ASTM D 5938 : 1996
|
Standard Test Method for Determination of Tensile Properties (Withdrawn 1998) |
I.S. EN 12814-4:2002
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
ISO 17454:2006
|
Plastics piping systems Multilayer pipes Test method for the adhesion of the different layers using a pulling rig |
ISO 4578:1997
|
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
BS ISO 813:2016
|
Rubber, vulcanized or thermoplastic. Determination of adhesion to a rigid substrate. 90° peel method |
UNI ISO 7743 : 2012
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES |
ISO 20866:2018
|
Footwear — Test methods for insoles — Delamination resistance |
EN 12814-4:2018
|
Testing of welded joints of thermoplastics semi-finished products - Part 4: Peel test |
DIN EN 14257 E : 2006
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
I.S. EN 12068:1999
|
CATHODIC PROTECTION - EXTERNAL ORGANIC COATINGS FOR THE CORROSION PROTECTION OF BURIED OR IMMERSED STEEL PIPELINES USED IN CONJUNCTION WITH CATHODIC PROTECTION - TAPES AND SHRINKABLE MATERIALS |
EN ISO 14125:1998/A1:2011
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
ISO 15113:2005
|
Rubber — Determination of frictional properties |
DIN EN 14188-3:2006-04
|
Joint fillers and sealants - Part 3: Specifications for preformed joint seals |
NF EN 12814-2 : 2000
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 2: TENSILE TEST |
DIN EN 302-4:2013-06
|
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
DIN EN 302-6:2013-06
|
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
BS EN 302-1:2013
|
Adhesives for load-bearing timber structures. Test methods Determination of longitudinal tensile shear strength |
ISO 14125:1998
|
Fibre-reinforced plastic composites Determination of flexural properties |
BS EN 13706-2:2002
|
Reinforced plastics composites. Specifications for pultruded profiles Method of test and general requirements |
BS EN ISO 9513:2012
|
Metallic materials. Calibration of extensometer systems used in uniaxial testing |
BS EN 12814-1:2000
|
Testing of welded joints of thermoplastics semi-finished products Bend test |
ISO 9513:2012
|
Metallic materials — Calibration of extensometer systems used in uniaxial testing |
EN ISO 8033:2017
|
Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) |
EN 638 : 1994
|
PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
EN 1979:1999
|
Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam |
UNI EN ISO 14125 : 2011
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
UNI EN 302-6 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
UNI EN 302-4 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 4: DETERMINATION OF THE EFFECTS OF WOOD SHRINKAGE ON THE SHEAR STRENGTH |
I.S. EN ISO 14125:1998
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF FLEXURAL PROPERTIES |
I.S. EN ISO 14126:2000
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
BS 2782-3.335A(1993) : AMD 8638
|
METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF FLEXURAL PROPERTIES |
UNI EN ISO 604 : 2008
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
UNI EN ISO 9513 : 2013
|
METALLIC MATERIALS - CALIBRATION OF EXTENSOMETER SYSTEMS USED IN UNIAXIAL TESTING |
UNI EN 302-1 : 2013
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 1: DETERMINATION OF LONGITUDINAL TENSILE SHEAR STRENGTH |
ISO 1827:2016
|
Rubber, vulcanized or thermoplastic — Determination of shear modulus and adhesion to rigid plates — Quadruple-shear methods |
BS ISO 34-2:2015
|
Rubber, vulcanized or thermoplastic. Determination of tear strength Small (Delft) test pieces |
96/125176 DC : DRAFT SEP 96
|
ISO/CD 15024 DETERMINATION OF THE MODE 1 DELAMINATION RESISTANCE (CRITICAL STRAIN ENERGY RELEASE RATE OR FRACTURE TOUGHNESS G[LC]) OF UNIDIRECTIONAL FIBRE-REINFORCED POLYMER LAMINATES USING THE DOUBLE CANTILEVER BEAM (DCB) SPECIMEN |
UNI EN ISO 20795-2 : 2013
|
DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS |
DIN EN 15416-5 E : 2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
13/30259197 DC : 0
|
BS EN 16556 - ADHESIVES - DETERMINATION OF THE OPEN ASSEMBLY TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS |
BS 2782-11.1110B(1995) : 1995
|
METHODS OF TESTING PLASTICS - THERMOPLASTICS PIPES, FITTING AND VALVES - PLASTICS PIPING AND DUCTING SYSTEMS - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES |
DIN ISO 18352 E : 2017
|
CARBON-FIBRE-REINFORCED PLASTICS - DETERMINATION OF COMPRESSION-AFTER-IMPACT PROPERTIES AT A SPECIFIED IMPACT-ENERGY LEVEL (ISO 18352:2009) |
ISO 12815:2013
|
Fibre-reinforced plastic composites — Determination of plain-pin bearing strength |
ISO 6916-1:1995
|
Flexible cellular polymeric materials — Sponge and expanded cellular rubber products — Specification — Part 1: Sheeting |
14/30300605 DC : 0
|
BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
BS EN 15870:2009
|
Adhesives. Determination of tensile strength of butt joints |
BS EN ISO 21809-3:2016
|
Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
BS ISO 15114:2014
|
Fibre-reinforced plastic composites. Determination of the mode II fracture resistance for unidirectionally reinforced materials using the calibrated end-loaded split (C-ELS) test and an effective crack length approach |
BS ISO 12493:2017
|
Rubber, vulcanized. Determination of stress in tension upon heating |
00/121284 DC : DRAFT MAR 2000
|
PREN 13864 - SURFACES FOR SPORTS AREAS - DETERMINATION OF TENSILE STRENGTH OF SYNTHETIC YARNS |
BS ISO 12815:2013
|
Fibre-reinforced plastic composites. Determination of plain-pin bearingstrength |
DIN ISO 11752 E : 2004
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS - MOULDED AND EXTRUDED SPONGE OR EXPANDED CELLULAR RUBBER PRODUCTS - COMPRESSIBILITY TEST ON FINISHED PARTS |
DIN EN 14840 E : 2005
|
JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
15/30296777 DC : 0
|
BS EN 15416-4 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
BS ISO 34-1:2015
|
Rubber, vulcanized or thermoplastic. Determination of tear strength Trouser, angle and crescent test pieces |
ISO 4647:2010
|
Rubber, vulcanized Determination of static adhesion to textile cord H-pull test |
15/30328396 DC : 0
|
BS EN 302-3 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
12/30215688 DC : 0
|
BS ISO 15114 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE MODE 2 FRACTURE RESISTANCE FOR UNIDIRECTIONALLY REINFORCED MATERIALS USING THE CALIBRATED END-LOADED SPLIT (C-ELS) TEST AND AN EFFECTIVE CRACK LENGTH APPROACH |
11/30245847 DC : 0
|
BS EN 302-6 - ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 6: DETERMINATION OF THE MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
BS ISO 9026:2007
|
Raw rubber or unvulcanized compounds. Determination of green strength |
15/30296762 DC : 0
|
BS EN 15416-5 - ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 5: DETERMINATION OF MINIMUM PRESSING TIME UNDER REFERENCED CONDITIONS |
04/30110689 DC : DRAFT MARCH 2004
|
BS ISO 37 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF TENSIILE STRESS-STRAIN PROPERTIES |
DIN ISO 7743:2016-08
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF COMPRESSION STRESS-STRAIN PROPERTIES (ISO 7743:2011) |
ISO 13586:2000
|
Plastics Determination of fracture toughness (GIC and KIC) Linear elastic fracture mechanics (LEFM) approach |
BS ISO 19213:2017
|
Implants for surgery. Test methods of material for use as a cortical bone model |
PREN ISO 20795-2 : DRAFT 2012
|
DENTISTRY - BASE POLYMERS - PART 2: ORTHODONTIC BASE POLYMERS (ISO/FDIS 20795-2:2012) |
I.S. EN 16556:2014
|
DETERMINATION OF THE MAXIMUM OPEN TIME FOR THERMOPLASTIC WOOD ADHESIVES FOR NONSTRUCTURAL APPLICATIONS |
UNE-ISO 34-1:2011
|
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces |
ISO 4664:1998
|
Rubber Guide to the determination of dynamic properties |
ISO 15107:1998
|
Adhesives Determination of cleavage strength of bonded joints |
BS EN ISO 13262:2017
|
Thermoplastics piping systems for non-pressure underground drainage and sewerage. Thermoplastics spirally-formed structured-wall pipes. Determination of the tensile strength of a seam |
ISO 18899:2013
|
Rubber — Guide to the calibration of test equipment |
ISO 15024:2001
|
Fibre-reinforced plastic composites — Determination of mode I interlaminar fracture toughness, GIC, for unidirectionally reinforced materials |
DIN EN ISO 14125:2011-05
|
Fibre-reinforced plastic composites - Determination of flexural properties (ISO 14125:1998 + Cor 1:2001 + Amd 1:2011) |
DIN EN ISO 14130:1998-02
|
FIBRE REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
DIN EN 302-3:2015-09 (Draft)
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
DIN EN ISO 604 E : 2003
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
DIN EN 13864:2004-09
|
Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
BS EN ISO 14126:1999
|
Fibre-reinforced plastic composites. Determination of compressive properties in the in-plane direction |
BS EN ISO 11339:2010
|
Adhesives. T-peel test for flexible-to-flexible bonded assemblies |
DIN EN ISO 604:2003-12
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES |
ISO 8033:2016
|
Rubber and plastics hoses Determination of adhesion between components |
EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
BS EN 638:1995
|
Plastics piping and ducting systems. Thermoplastics pipes. Determination of tensile properties |
BS EN 12814-2:2000
|
Testing of welded joints of thermoplastics semi-finished products Tensile test |
UNE-EN ISO 4074:2016
|
Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
ISO 14129:1997
|
Fibre-reinforced plastic composites — Determination of the in-plane shear stress/shear strain response, including the in-plane shear modulus and strength, by the plus or minus 45 degree tension test method |
BS EN 14188-3 : 2005
|
JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
UNE-EN 302-1:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
ISO 6259-1:2015
|
Thermoplastics pipes Determination of tensile properties Part 1: General test method |
ISO 14130:1997
|
Fibre-reinforced plastic composites — Determination of apparent interlaminar shear strength by short-beam method |
UNE-EN 302-4:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
BS EN ISO 6259-1:2015
|
Thermoplastics pipes. Determination of tensile properties General test method |
ISO 20795-2:2013
|
Dentistry Base polymers Part 2: Orthodontic base polymers |
BS EN 13587:2016
|
Bitumen and bituminous binders. Determination of the tensile properties of bituminous binders by the tensile test method |
UNE-EN ISO 14125:1999
|
FIBRE-REINFORCED PLASTICS COMPOSITES. DETERMINATION OF FLEXURAL PROPERTIES (ISO 14125:1998) |
BS EN 13864:2004
|
Surfaces for sports areas. Determination of tensile strength of synthetic yarns |
ISO 14126:1999
|
Fibre-reinforced plastic composites — Determination of compressive properties in the in-plane direction |
UNE-EN ISO 9513:2013
|
Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012, Corrected version 2015-06) |
ISO 4074:2015
|
Natural rubber latex male condoms Requirements and test methods |
BS EN 302-6:2013
|
Adhesives for load-bearing timber structures. Test methods Determination of the minimum pressing time under referenced conditions |
UNE-ISO 7743:2016
|
Rubber, vulcanized or thermoplastic. Determination of compression stress-strain properties |
UNE-EN 15416-5:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
UNE-EN 302-6:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
EN 14188-3 : 2006
|
JOINT FILLERS AND SEALANTS - PART 3: SPECIFICATIONS FOR PREFORMED JOINT SEALS |
EN ISO 15310:2005
|
Fibre-reinforced plastic composites - Determination of the in-plane shear modulus by the plate twist method (ISO 15310:1999) |
EN 14840 : 2005
|
JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
EN 13864:2004
|
Surfaces for sports areas - Determination of tensile strength of synthetic yarns |
EN ISO 14130 : 1997
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF APPARENT INTERLAMINAR SHEAR STRENGTH BY SHORT-BEAM METHOD |
UNI EN ISO 11339 : 2010
|
ADHESIVES - T-PEEL TEST FOR FLEXIBLE-TO- FLEXIBLE BONDED ASSEMBLIES |
EN ISO 14126:1999/AC:2002
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF COMPRESSIVE PROPERTIES IN THE IN-PLANE DIRECTION |
EN 15416-5:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 5: Determination of minimum pressing time under referenced conditions |
EN 13706-2:2002
|
Reinforced plastics composites - Specifications for pultruded profiles - Part 2: Methods of test and general requirements |
EN 302-4:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 4: Determination of the effects of wood shrinkage on the shear strength |
EN ISO 11339:2010
|
Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) |
EN 15870:2009
|
Adhesives - Determination of tensile strength of butt joints (ISO 6922:1987 modified) |
EN ISO 604 : 2003
|
PLASTICS - DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:2002) |
EN 16556:2014
|
Determination of the maximum open time for thermoplastic wood adhesives for non-structural applications |
EN ISO 6259-1:2015
|
Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) |
EN 205:2016
|
Adhesives - Wood adhesives for non-structural applications - Determination of tensile shear strength of lap joints |
EN ISO 14129 : 1997
|
FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF THE IN-PLANE SHEAR STRESS/SHEAR STRAIN RESPONSE, INCLUDING THE IN-PLANE SHEAR MODULUS AND STRENGTH, BY THE +/- 45 DEGREES TENSION TEST METHOD (ISO 14129:1997) |
EN 302-6:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 6: Determination of the minimum pressing time under referenced conditions |
EN ISO 20795-2:2013
|
Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO 20795-2:2013) |
EN 302-3:2017
|
Adhesives for load-bearing timber structures - Test methods - Part 3: Determination of the effect of acid damage to wood fibres by temperature and humidity cycling on the transverse tensile strength |
EN ISO 4074:2015
|
Natural rubber latex male condoms - Requirements and test methods (ISO 4074:2015) |
EN 302-1:2013
|
Adhesives for load-bearing timber structures - Test methods - Part 1: Determination of longitudinal tensile shear strength |
EN 14257:2006
|
Adhesives - Wood adhesives - Determination of tensile strength of lap joints at elevated temperature (WATT '91) |
EN 15416-4:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
UNI ISO 813 : 2011
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ADHESION TO A RIGID SUBSTRATE - 90 DEGREES PEEL METHOD |
BS 2782-3.321(1994) : 1994 AMD 8633
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - GENERAL PRINCIPLES |
DIN EN 15870:2009-08
|
ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF BUTT JOINTS |
BS ISO 1827:2016
|
Rubber, vulcanized or thermoplastic. Determination of shear modulus and adhesion to rigid plates. Quadruple-shear methods |
BS PAS 27(1999) : 1999
|
UNPLASTICIZED POLY(VINYL CHLORIDE) ALLOY (PVC-A) PIPES AND BENDS FOR WATER UNDER PRESSURE |
16/30334053 DC : 0
|
BS EN ISO 2411 - RUBBER- OR PLASTICS-COATED FABRICS - DETERMINATION OF COATING ADHESION |
I.S. EN 62011-2:2004
|
INSULATING MATERIALS - INDUSTRIAL, RIGID, MOULDED, LAMINATED TUBES AND RODS OF RECTANGULAR AND HEXAGONAL CROSS-SECTION, BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES, - PART 2: METHODS OF TEST |
I.S. EN ISO 21809-3:2016
|
PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
16/30335302 DC : 0
|
BS ISO 1827 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF SHEAR MODULUS AND ADHESION TO RIGID PLATES - QUADRUPLE-SHEAR METHODS |
BS EN 62011-2:2004
|
Insulating materials. Industrial, rigid, moulded, laminated tubes and rods of rectangular and hexagonal cross-section, based on thermosetting resins for electrical purposes Methods of test |
DIN ISO 11752:2004-11
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS - MOULDED AND EXTRUDED SPONGE OR EXPANDED CELLULAR RUBBER PRODUCTS - COMPRESSIBILITY TEST ON FINISHED PARTS |
15/30302738 DC : 0
|
BS ISO 19213 - IMPLANTS FOR SURGERY - TEST METHODS OF MATERIAL FOR USE AS A CORTICAL BONE MODEL |
BS ISO 12817:2013
|
Fibre-reinforced plastic composites. Determination of open-hole compression strength |
11/30196210 DC : 0
|
BS ISO 12815 - FIBRE-REINFORCED PLASTIC COMPOSITES - DETERMINATION OF PLAIN-PIN BEARING STRENGTH |
12/30251858 DC : 0
|
BS ISO 4074 - NATURAL RUBBER LATEX MALE CONDOMS - REQUIREMENTS AND TEST METHODS |
13/30274532 DC : 0
|
BS EN ISO 6259-1 - THERMOPLASTICS PIPES - DETERMINATION OF TENSILE PROPERTIES - PART 1: GENERAL TEST METHOD |
12/30261822 DC : 0
|
BS ISO 6914 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION |
BIS IS 13360-5-8 : 2013
|
PLASTICS - METHODS OF TESTING - PART 5: MECHANICAL PROPERTIES - SECTION 8: DETERMINATION OF COMPRESSIVE PROPERTIES |
BS ISO 11752:2000
|
Flexible cellular polymeric materials. Moulded and extruded sponge or expanded cellular rubber products. Compressibility test on finished parts |
DIN EN 15416-4 E : 2017
|
ADHESIVES FOR LOAD BEARING TIMBER STRUCTURES OTHER THAN PHENOLIC AND AMINOPLASTIC - TEST METHODS - PART 4: DETERMINATION OF OPEN ASSEMBLY TIME UNDER REFERENCED CONDITIONS |
16/30312462 DC : 0
|
BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
ISO 5600:2017
|
Rubber — Determination of adhesion to rigid materials using conical shaped parts |
BS 903-A62:1993
|
Physical testing of rubber Method for determination of green strength of raw rubber of unvulcanized compounds |
BS ISO 36:2017
|
Rubber, vulcanized or thermoplastic. Determination of adhesion to textile fabrics |
ISO 7743:2017
|
Rubber, vulcanized or thermoplastic Determination of compression stress-strain properties |
PREN 3795 : 200P1
|
AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE |
ONORM EN 14257 : 2006
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
ISO 4635:2011
|
Rubber, vulcanized Preformed joint seals for use between concrete paving sections of highways Specification |
ASTM D 5943 : 1996
|
Test Method for Determination of Flexural Properties (Withdrawn 1998) |
UNI ISO 6914 : 2014
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF AGEING CHARACTERISTICS BY MEASUREMENT OF STRESS RELAXATION IN TENSION |
ISO 6914:2013
|
Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension |
I.S. EN IEC 61730-2:2018
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
UNE-EN ISO 21809-3:2016
|
Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
ISO 11752:2000
|
Flexible cellular polymeric materials — Moulded and extruded sponge or expanded cellular rubber products — Compressibility test on finished parts |
ISO 604:2002
|
Plastics — Determination of compressive properties |
ISO 4585:1989
|
Textile glass reinforced plastics Determination of apparent interlaminar shear properties by short-beam test |
NF EN 12814-4 : 2002
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 4: PEEL TEST |
PREN 205 : DRAFT 2015
|
ADHESIVES - WOOD ADHESIVES FOR NON-STRUCTURAL APPLICATIONS - DETERMINATION OF TENSILE SHEAR STRENGTH OF LAP JOINTS |
PREN 302-3 : DRAFT 2015
|
ADHESIVES FOR LOAD-BEARING TIMBER STRUCTURES - TEST METHODS - PART 3: DETERMINATION OF THE EFFECT OF ACID DAMAGE TO WOOD FIBRES BY TEMPERATURE AND HUMIDITY CYCLING ON THE TRANSVERSE TENSILE STRENGTH |
BS EN 12814-4:2001
|
Testing of welded joints of thermoplastics semi-finished products Peel test |
ISO 9026:2007
|
Raw rubber or unvulcanized compounds Determination of green strength |
I.S. EN 14257:2006
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
I.S. EN 14840:2005
|
JOINT FILLERS AND SEALANTS - TEST METHODS FOR PREFORMED JOINT SEALS |
IEC 61730-2 REDLINE : 2ED 2016
|
PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 2: REQUIREMENTS FOR TESTING |
BS EN 12744:1999
|
Footwear. Test methods for insoles. Delamination resistance |
UNE-EN 15416-4:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic - Test methods - Part 4: Determination of open assembly time under referenced conditions |
BS EN ISO 14130:1998
|
Fibre-reinforced plastic composites. Determination of apparent interlaminar shear strength by short-beam method |
ISO 11339:2010
|
Adhesives T-peel test for flexible-to-flexible bonded assemblies |
BS EN 15416-4:2017
|
Adhesives for load bearing timber structures other than phenolic and aminoplastic. Test methods Determination of open assembly time under referenced conditions |
BS EN 12637-3:2003
|
Products and systems for the protection and repair of concrete structures. Test methods. Compatibility of injection products Effect of injection products on elastomers |
BS EN 302-4:2013
|
Adhesives for load-bearing timber structures. Test methods Determination of the effects of wood shrinkage on the shear strength |
BS EN ISO 15310:2005
|
Reinforced plastics. Determination of the in-plane shear modulus by the plate twist method |
BS EN 12814-7:2002
|
Testing of welded joints of thermoplastics semi-finished products Tensile test with waisted test specimens |
BS EN 205:2003
|
Adhesives. Wood adhesives for non-structural applications. Determination of tensile shear strength of lap joints |
BS EN ISO 4074:2015
|
Natural rubber latex male condoms. Requirements and test methods |
EN 12637-3:2003
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers |
DIN EN 14840:2005-12
|
Joint fillers and sealants - Test methods for preformed joint seals |
DIN EN 12637-3:2004-03
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 3: Effect of injection products on elastomers; German version EN 12637-3:2003 |
DIN EN 14257:2006-09
|
ADHESIVES - WOOD ADHESIVES - DETERMINATION OF TENSILE STRENGTH OF LAP JOINTS AT ELEVATED TEMPERATURE (WATT '91) |
EN 12745 : 1999
|
FOOTWEAR - TEST METHODS FOR INSOLES - HEEL PIN HOLDING STRENGTH |
EN 12814-7:2002
|
Testing of welded joints of thermoplastics semi-finished products - Part 7: Tensile test with waisted test specimens |
EN 12068:1998
|
Cold-rolled flat products made of high yield strength micro-alloyed steels for cold forming - General delivery conditions |
DIN EN 12814-7:2003-01
|
TESTING OF WELDED JOINTS OF THERMOPLASTICS SEMI-FINISHED PRODUCTS - PART 7: TENSILE TEST WITH WAISTED TEST SPECIMENS |
DIN EN 12637-1:2004-11
|
Products and systems for the protection and repair of concrete structures - Test methods - Compatibility of injection products - Part 1: Compatibility with concrete |
IEC 61730-2:2016 RLV
|
Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing |
BS 2782-3.345A(1993) : 1993 AMD 8637
|
METHODS OF TESTING PLASTICS - MECHANICAL PROPERTIES - DETERMINATION OF COMPRESSIVE PROPERTIES |