Skip to content
Please enter a keyword to search

  • ISO 7626-1:2011

    Current The latest, up-to-date edition.

    Mechanical vibration and shock — Experimental determination of mechanical mobility — Part 1: Basic terms and definitions, and transducer specifications

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English, French

    Published date:  15-07-2011

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 7626-1:2011 defines basic terms and specifies the calibration tests, environmental tests and physical measurements necessary to determine the suitability of impedance heads, force transducers and motion response transducers for use in measuring mechanical mobility. Primarily, it provides guidelines for the selection, calibration and evaluation of the transducers and instruments for their suitability in making mobility measurements. Procedures for carrying out mobility measurements in various circumstances are dealt with in subsequent parts of ISO 7626.

    ISO 7626-1:2011 is limited to information which is basic to various types of driving-point and transfer mobility, accelerance and dynamic compliance measurements. Measurements of the blocked impedance are not dealt with.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ISO/DIS 7626-1. (07/2011)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNE-EN 15461:2008 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
    ANSI/ASA S2.61 : 1989(R2015) GUIDE TO THE MECHANICAL MOUNTING OF ACCELEROMETERS
    ISO 2017-2:2007 Mechanical vibration and shock — Resilient mounting systems — Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems
    BS ISO 2017-2:2007 Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for the application of vibration isolation associated with railway systems
    ISO 7626-2:2015 Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter
    ISO 7626-5:1994 Vibration and shock Experimental determination of mechanical mobility Part 5: Measurements using impact excitation with an exciter which is not attached to the structure
    BS EN 15657:2017 Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
    BS ISO 7626-2:2015 Mechanical vibration and shock. Experimental determination of mechanical mobility Measurements using single-point translation excitation with an attached vibration exciter
    DIN EN 15657 E : 2017 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
    03/303212 DC : DRAFT FEB 2003 ISO 2017-1 - MECHANICAL VIBRATION AND SHOCK - RESILIENT MOUNTING SYSTEMS - PART 1: APPLICATION OF SOURCE AND RECEIVER ISOLATION
    UNI EN 15657-1 : 2009 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE
    ISO 10068:2012 Mechanical vibration and shock — Mechanical impedance of the human hand-arm system at the driving point
    IEC TS 60034-32:2016 Rotating electrical machines - Part 32: Measurement of stator end-winding vibration at form-wound windings
    I.S. EN 15657-1:2009 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
    ASTM D 6874 : 2012 : REDLINE Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
    I.S. EN 15461:2008 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
    DIN EN 1299:2009-02 MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
    BS EN ISO 10846-2:2008 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
    BS EN ISO 10846-4:2003 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Dynamic stiffness of elements other than resilient supports for translatory motion
    15/30293881 DC : 0 BS ISO 2017-3 - MECHANICAL VIBRATION AND SHOCK - RESILIENT MOUNTING SYSTEMS - PART 3: TECHNICAL INFORMATION TO BE EXCHANGED FOR APPLICATION OF VIBRATION ISOLATION TO NEW BUILDINGS
    BS ISO 9611:1996 Acoustics. Characterization of sources of structure-borne sound with respect to sound radiation from connected structures. Measurement of velocity at the contact points of machinery when resiliently mounted
    DIN EN 15461 E : 2011 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
    05/30064424 DC : DRAFT NOV 2005 ISO 10846-5 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: LOW FREQUENCY DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION (DRIVING POINT METHOD)
    BS ISO 2017-3:2015 Mechanical vibration and shock. Resilient mounting systems Technical information to be exchanged for application of vibration isolation to new buildings
    15/30273263 DC : 0 BS ISO 18324 - TIMBER STRUCTURES - TEST METHODS - FLOOR VIBRATION PERFORMANCE
    BS ISO 18436-2:2014 Condition monitoring and diagnostics of machines. Requirements for qualification and assessment of personnel Vibration condition monitoring and diagnostics
    ISO 21289:2008 Mechanical vibration and shock — Parameters to be specified for the acquisition of vibration data
    BS EN 15461 : 2008 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
    ISO 10846-3:2002 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
    I.S. EN ISO 10846-2:2008 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    I.S. EN 1299:1997 MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
    DIN EN 15657-1:2009-10 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WIRLPOOL BATHS AS AN EXAMPLE
    DIN EN 15657:2016-02 (Draft) ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
    BS ISO 10068:2012 Mechanical vibration and shock. Mechanical impedance of the human hand-arm system at the driving point
    DIN ISO 18436-2:2014-11 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS (ISO 18436-2:2014)
    DIN EN ISO 10846-5:2009-07 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    ISO 2017-3:2015 Mechanical vibration and shock — Resilient mounting systems — Part 3: Technical information to be exchanged for application of vibration isolation to new buildings
    UNI ISO 18436-2 : 2014 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING AND DIAGNOSTICS
    EN ISO 10848-1:2017 Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017)
    IEC TS 62271-210:2013 High-voltage switchgear and controlgear - Part 210: Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV
    ISO 10846-2:2008 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion
    EN 15657:2017 Acoustic properties of building elements and of buildings - Laboratory measurement of structure-borne sound from building service equipment for all installation conditions
    UNI EN ISO 10846-5 : 2009 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    UNI EN 1299 : 2009 MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
    UNI EN ISO 10846-2 : 2008 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    EN 1299:1997+A1:2008 Mechanical vibration and shock - Vibration isolation of machines - Information for the application of source isolation
    NF EN 15461 : 2008 + A1 2011 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
    07/30161870 DC : 0 BS EN 15657-1 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF AIRBORNE AND STRUCTURE BORNE SOUND FROM BUILDING EQUIPMENT - PART 1: SIMPLIFIED CASES WHERE THE EQUIPMENT MOBILITIES ARE MUCH HIGHER THAN THE RECEIVER MOBILITIES, TAKING WHIRLPOOL BATHS AS AN EXAMPLE
    07/30098123 DC : 0 BS ISO 10302-1 - ACOUSTICS - MEASUREMENT OF AIRBORNE NOISE EMITTED AND STRUCTURE-BORNE VIBRATION INDUCED BY SMALL AIR-MOVING DEVICES - PART 1: AIRBORNE NOISE MEASUREMENT
    06/30147385 DC : 0 EN 15461 - RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERIZATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
    BS 6897-2:1990 Methods for experimental determination of mechanical mobility. Measurements using single-point translation excitation with an attached vibration exciter
    ASHRAE 87.3 : 2001 : R2006 METHODS OF TESTING PROPELLER FAN VIBRATION - DIAGNOSTIC TEST METHODS
    05/30103114 DC : DRAFT NOV 2005 ISO 10846-2 - ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION - DIRECT METHOD
    UNI EN 15461 : 2011 RAILWAY APPLICATIONS - NOISE EMISSION - CHARACTERISATION OF THE DYNAMIC PROPERTIES OF TRACK SECTIONS FOR PASS BY NOISE MEASUREMENTS
    I.S. EN 15657:2017 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
    I.S. EN ISO 10846-5:2009 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBROACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    ANSI S2.61 : 1989 : R2010 GUIDE TO THE MECHANICAL MOUNTING OF ACCELEROMETERS
    ISO 10848-1:2017 Acoustics — Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms — Part 1: Frame document
    DIN EN ISO 10846-4:2004-02 Acoustics and vibration - Laboratory measurement of the vibro-acoustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than elastic supports for translatory motion (ISO 10846-4:2003); German version EN ISO 10846-4:2003
    ISO 10846-4:2003 Acoustics and vibration — Laboratory measurement of vibro-acoustic transfer properties of resilient elements — Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion
    BS EN 1299 : 1997 MECHANICAL VIBRATION AND SHOCK - VIBRATION ISOLATION OF MACHINES - INFORMATION FOR THE APPLICATION OF SOURCE ISOLATION
    EN 15657-1:2009 Acoustic properties of building elements and of buildings - Laboratory measurement of airborne and structure borne sound from building equipment - Part 1: Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
    EN ISO 10846-3 : 2002 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 3: INDIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    EN ISO 10846-4 : 2003 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 4: DYNAMIC STIFFNESS OF ELEMENTS OTHER THAN RESILIENT SUPPORTS FOR TRANSLATORY MOTION (ISO 10846-4:2003)
    EN ISO 10846-5:2009 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion (ISO 10846-5:2008)
    EN ISO 10846-2:2008 Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion (ISO 10846-2:2008)
    EN 15461:2008+A1:2010 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements
    BS EN 15657-1:2009 Acoustic properties of building elements and of buildings. Laboratory measurement of airborne and structure borne sound from building equipment Simplified cases where the equipment mobilities are much higher than the receiver mobilities, taking whirlpool baths as an example
    BS EN ISO 10846-5:2009 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion
    12/30245647 DC : 0 BS ISO 10068 - MECHANICAL VIBRATION AND SHOCK - MECHANICAL IMPEDANCE OF THE HUMAN HAND-ARM SYSTEM AT THE DRIVING POINT
    ISO 18436-2:2014 Condition monitoring and diagnostics of machines — Requirements for qualification and assessment of personnel — Part 2: Vibration condition monitoring and diagnostics
    11/30197017 DC : 0 BS ISO 18436-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - REQUIREMENTS FOR QUALIFICATION AND ASSESSMENT OF PERSONNEL - PART 2: VIBRATION CONDITION MONITORING
    BS EN ISO 10848-1:2017 Acoustics. Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms Frame document
    DIN EN 15461:2011-01 Railway applications - Noise emission - Characterisation of the dynamic properties of track sections for pass by noise measurements (includes Amendment A1:2010)
    PD IEC/TS 62271-210:2013 High-voltage switchgear and controlgear Seismic qualification for metal enclosed and solid-insulation enclosed switchgear and controlgear assemblies for rated voltages above 1 kV and up to and including 52 kV
    BS ISO 21289:2008 Mechanical vibration and shock. Parameters to be specified for the acquisition of vibration data
    14/30284662 DC : 0 BS ISO 7626-2 - MECHANICAL VIBRATION AND SHOCK - EXPERIMENTAL DETERMINATION OF MECHANICAL MOBILITY - PART 2: MEASUREMENTS USING SINGLE-POINT TRANSLATION EXCITATION WITH AN ATTACHED VIBRATION EXCITER
    PD IEC/TS 60034-32:2016 Rotating electrical machines Measurement of stator end-winding vibration at form-wound windings
    16/30333609 DC : 0 BS EN 15657 - ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS
    ASHRAE 87.3 : 2001 : R2010 METHODS OF TESTING PROPELLER FAN VIBRATION - DIAGNOSTIC TEST METHODS
    NF EN ISO 10846-5 : 2009 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 5: DRIVING POINT METHOD FOR DETERMINATION OF THE LOW-FREQUENCY TRANSFER STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    ISO 18324:2016 Timber structures Test methods Floor vibration performance
    I.S. EN ISO 10848-1:2017 ACOUSTICS - LABORATORY AND FIELD MEASUREMENT OF FLANKING TRANSMISSION FOR AIRBORNE, IMPACT AND BUILDING SERVICE EQUIPMENT SOUND BETWEEN ADJOINING ROOMS - PART 1: FRAME DOCUMENT (ISO 10848-1:2017)
    DIN EN ISO 10846-2:2008-11 ACOUSTICS AND VIBRATION - LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS - PART 2: DIRECT METHOD FOR DETERMINATION OF THE DYNAMIC STIFFNESS OF RESILIENT SUPPORTS FOR TRANSLATORY MOTION
    BS EN ISO 10846-3:2002 Acoustics and vibration. Laboratory measurement of vibro-acoustic transfer properties of resilient elements Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion
    DIN EN 15657:2017-10 ACOUSTIC PROPERTIES OF BUILDING ELEMENTS AND OF BUILDINGS - LABORATORY MEASUREMENT OF STRUCTURE-BORNE SOUND FROM BUILDING SERVICE EQUIPMENT FOR ALL INSTALLATION CONDITIONS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 7626-2:2015 Mechanical vibration and shock Experimental determination of mechanical mobility Part 2: Measurements using single-point translation excitation with an attached vibration exciter
    ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
    IEC 60263:1982 Scales and sizes for plotting frequency characteristics and polar diagrams
    ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective