DIN ISO 21360-1 E : 2016
|
VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012) |
DIN ISO 21360-1:2016-09
|
VACUUM TECHNOLOGY - STANDARD METHODS FOR MEASURING VACUUM-PUMP PERFORMANCE - PART 1: GENERAL DESCRIPTION (ISO 21360-1:2012) |
10/30214897 DC : 0
|
BS ISO 3898 - BASES FOR DESIGN OF STRUCTURES - NAMES AND SYMBOLS OF PHYSICAL QUANTITIES - GENERIC QUANTITIES |
15/30283700 DC : 0
|
BS EN ISO 80000-12 - QUANTITIES AND UNITS - PART 12: CONDENSED MATTER PHYSICS |
17/30330389 DC : 0
|
BS EN ISO 80000-9 - QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
DIN EN ISO 11372:2012-03
|
Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
I.S. EN ISO 11810-2:2009
|
LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
ISO 80000-7:2008
|
Quantities and units Part 7: Light |
CEI UNI EN 80000-6 : 2009
|
QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
DIN EN ISO 10961:2012-06
|
GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
UNI CEI ISO 80000-12 : 2010
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
BS EN ISO 10961:2012
|
Gas cylinders. Cylinder bundles. Design, manufacture, testing and inspection |
PREN 764-1 : DRAFT 2013
|
PRESSURE EQUIPMENT - PART 1: VOCABULARY |
DIN EN ISO 80000-11 E : 2013
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
07/30126396 DC : DRAFT AUG 2007
|
BS ISO 80000-9 - QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
16/30297082 DC : 0
|
BS EN ISO 80000-5 - QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
BS EN 62884-1:2017
|
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators Basic methods for the measurement |
UNE-EN ISO 80000-11:2013
|
Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
12/30240396 DC : 0
|
BS ISO 80003-2 - PHYSIOLOGICAL QUANTITIES AND THEIR UNITS - PART 2: PHYSICS |
DIN EN ISO 80000-12 E : 2013
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
UNI EN ISO 10462 : 2014
|
GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
DIN EN ISO 80000-9:2013-08
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
I.S. EN ISO 13088:2012
|
GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
I.S. EN 14531-6:2009
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
ISO 19634:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Ceramic composites — Notations and symbols |
ISO 21010:2017
|
Cryogenic vessels — Gas/material compatibility |
BS EN ISO 13088:2012
|
Gas cylinders. Acetylene cylinder bundles. Filling conditions and filling inspection |
API 11D2 : 2010
|
PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PUMPS |
CEI UNI 70099 : 2010
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
CEN/TR 13233 : 2007 COR 2007
|
ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
I.S. EN ISO 13769:2009
|
GAS CYLINDERS - STAMP MARKING |
BIS IS/ISO 80000-10 : 2009
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
UNI CEI ISO 80000-7 : 2009
|
QUANTITIES AND UNITS - PART 7: LIGHT |
EN ISO 8536-4:2013/A1:2013
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010/AMD 1:2013) |
DIN EN ISO 80000-8:2008-01
|
QUANTITIES AND UNITS - PART 8: ACOUSTICS |
DIN EN ISO 12213-3:2010-01
|
Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
BS EN ISO 80000-8:2007
|
Quantities and units Acoustics |
BS EN ISO 12213-3:2009
|
Natural gas. Calculation of compression factor Calculation using physical properties |
BS EN 13802:2013
|
Railway applications. Suspension components. Hydraulic dampers |
UNE-EN 764-2:2012
|
Pressure equipment - Part 2: Quantities, symbols and units |
EN ISO 10462:2013
|
Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
DIN EN ISO 4375:2015-03
|
HYDROMETRY - CABLEWAY SYSTEMS FOR STREAM GAUGING (ISO 4375:2014) |
EN 80000-14:2009
|
Quantities and units - Part 14: Telebiometrics related to human physiology |
EN ISO 1628-1:2009/A1:2012
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009/AMD 1:2012) |
EN 80000-6:2008
|
Quantities and units - Part 6: Electromagnetism |
BS ISO 21360-1:2012
|
Vacuum technology. Standard methods for measuring vacuum-pump performance General description |
CEI UNI EN 80000-14 : 2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
NF ISO 80000-10 : 2010
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
06/30160058 DC : 0
|
BS EN ISO 8536-4 - INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
12/30243456 DC : DRAFT MAR 2012
|
BS ISO 16249 - SPRINGS - SYMBOLS |
DIN EN ISO 3807 E : 2015
|
GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING (ISO 3807:2013, CORRECTED VERSION 2014-11-01) |
DIN EN ISO 80000-10:2016-09 (Draft)
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
BS EN ISO 80000-11:2013
|
Quantities and units Characteristic numbers |
UNI CEI EN 80000-14 : 2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
NF EN 14531-6 : 2009
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
BS ISO 80000-9 : 2009
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
UNI CEN/TR 14473 : 2014
|
TRANSPORTABLE GAS CYLINDERS - POROUS MATERIALS FOR ACETYLENE CYLINDERS |
BS ISO 13088 : 2011
|
GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION |
15/30280941 DC : 0
|
BS EN ISO 24431 - GAS CYLINDERS - CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING |
16/30337558 DC : 0
|
BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT AND RADIATION |
BS ISO 24431:2006
|
Gas cylinders. Cylinders for compressed and liquefied gases (excluding acetylene). Inspection at the time of filling |
CEI UNI ISO 80000-7 : 2009
|
QUANTITIES AND UNITS - PART 7: LIGHT |
BS EN 14531-6:2009
|
Railway applications. Methods for calculation of stopping and slowing distances and immobilization braking Step by step calculations for train sets or single vehicles |
PREN 14531-2 : DRAFT 2012
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
BS ISO 10961 : 2010
|
GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
BS EN ISO 8536-13:2016
|
Infusion equipment for medical use Graduated flow regulators for single use with fluid contact |
OIML V 2-200 : 2012
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
BS ISO 18437-4:2008
|
Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Dynamic stiffness method |
NF EN 80000-14 : 2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
BS EN ISO 24431:2016
|
Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling |
13/30274227 DC : 0
|
BS EN 764-1 - PRESSURE EQUIPMENT - PART 1: VOCABULARY |
UNI EN ISO 11810-2 : 2009
|
LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
UNI EN 4500-001 : 2014
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
07/30126405 DC : DRAFT DEC 2007
|
ISO 80000-12 - QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
BS EN ISO 3807:2013
|
Gas cylinders. Acetylene cylinders. Basic requirements and type testing |
16/30301546 DC : 0
|
BS ISO 19634 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - CERAMIC COMPOSITES - NOTATIONS AND SYMBOLS |
BS ISO 17089-1:2019
|
Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
BS ISO 80000-5 : 2007
|
QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
UNI EN ISO 1628-1 : 2012
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES |
BS EN ISO 17078-3:2009
|
Petroleum and natural gas industries. Drilling and production equipment Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
07/30126402 DC : 0
|
BS ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
PREN 14531-1 : DRAFT 2012
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
ISO 13769:2007
|
Gas cylinders Stamp marking |
UNI CEI ISO 80000-9 : 2010
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
EN 62884-1:2017
|
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
BS EN ISO 13769:2009
|
Gas cylinders. Stamp marking |
ISO 19613:2018
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Measurement of viscosity of ceramic slurry by use of a rotational viscometer |
I.S. EN ISO 8536-13:2016
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 13: GRADUATED FLOW REGULATORS FOR SINGLE USE WITH FLUID CONTACT (ISO 8536-13:2016) |
ISO 12242:2012
|
Measurement of fluid flow in closed conduits Ultrasonic transit-time meters for liquid |
I.S. EN ISO 10462:2013
|
GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE (ISO 10462:2013) |
EN ISO 13769:2009
|
Gas cylinders - Stamp marking (ISO 13769:2007) |
BS EN ISO 80000-10:2013
|
Quantities and units Atomic and nuclear physics |
UNI EN ISO 17078-3 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
EN ISO 10961:2012
|
Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) |
EN 764-2:2012
|
Pressure equipment - Part 2: Quantities, symbols and units |
UNE-EN ISO 8536-4:2013
|
Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) |
I.S. EN ISO 15136-1:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - PROGRESSING CAVITY PUMP SYSTEMS FOR ARTIFICIAL LIFT - PART 1: PUMPS |
CEN/TR 14473:2014
|
Transportable gas cylinders - Porous materials for acetylene cylinders |
I.S. EN ISO 4375:2014
|
HYDROMETRIC - CABLEWAY SYSTEMS FOR STREAM GAUGING (ISO 4375:2014) |
I.S. EN ISO 12213-2:2009
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
I.S. EN ISO 1628-1:2009
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
I.S. EN ISO 12213-3:2009
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
DIN EN ISO 11810-2:2009-07
|
LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER-RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT-PROTECTIVE COVERS - PART 2: SECONDARY IGNITION |
I.S. EN ISO 10297:2014
|
GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014, CORRECTED VERSION 2014-11-01) |
I.S. EN 13802:2013
|
RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
I.S. EN ISO 11810:2015
|
LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015) |
I.S. EN 764-2:2012
|
PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
DIN EN 764-2:2012-04
|
Pressure equipment - Part 2: Quantities, symbols and units |
UNE-EN ISO 24431:2017
|
Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
BIS IS/IEC 80000-6 : 2008
|
QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
12/30246381 DC : 0
|
BS EN ISO 3807 - GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING |
NF ISO 80000-12 : 2009
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNI CEI EN ISO 80000-12 : 2013
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
17/30334065 DC : 0
|
BS EN ISO 80000-11 - QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
DIN EN ISO 80000-12:2015-11 (Draft)
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
16/30299127 DC : DRAFT MAR 2016
|
BS EN ISO 13769 - GAS CYLINDERS - STAMP MARKING |
UNI EN ISO 10961 : 2012
|
GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION |
UNI CEI EN ISO 80000-11 : 2013
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
12/30263252 DC : 0
|
BS EN 14531-1 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
UNE-EN ISO 11372:2012
|
Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
DIN EN ISO 17871:2015-12
|
GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
BS EN 4500-001:2012
|
Aerospace series. Metallic materials. Rules for drafting and presentation of material standards General rules |
BS ISO 80000-12 : 2009
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
UNI EN ISO 11372 : 2012
|
GAS CYLINDERS - ACETYLENE CYLINDERS - FILLING CONDITIONS AND FILLING INSPECTION |
12/30245682 DC : 0
|
BS EN ISO 10462 - GAS CYLINDERS - ACETYLENE CYLINDERS - PERIODIC INSPECTION AND MAINTENANCE |
ISO 3898:2013
|
Bases for design of structures — Names and symbols of physical quantities and generic quantities |
BS ISO 16249:2013
|
Springs. Symbols |
BS EN ISO 11372:2011
|
Gas cylinders. Acetylene cylinders. Filling conditions and filling inspection |
UNE-ISO/IEC GUIA 99:2012 IN
|
International vocabulary of metrology. Basics and general concepts and associated terms (VIM) |
BIS IS/ISO 80000-11 : 2008
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
07/30156919 DC : DRAFT AUG 2007
|
BS EN 14531-6 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 6: HIGH SPEED TRAINS |
ISO/IEC Guide 99:2007
|
International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
PD CEN/TR 13233:2007
|
Advanced technical ceramics. Notations and symbols |
UNE-EN 14531-6:2010
|
Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles |
BIS IS/ISO 80000-9 : 2009
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
BS EN ISO 80000-9 : 2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
DIN EN ISO 1183-1:2013-04
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
DIN EN ISO 24431 E : 2017
|
GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
ISO 20475:2018
|
Gas cylinders — Cylinder bundles — Periodic inspection and testing |
I.S. EN ISO 80000-5:2013
|
QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000- 5:2007) |
UNI CEI ISO 80000-10 : 2010
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
S.R. CEN/TR 14473:2014
|
TRANSPORTABLE GAS CYLINDERS - POROUS MATERIALS FOR ACETYLENE CYLINDERS |
I.S. EN ISO 11372:2011
|
GAS CYLINDERS - ACETYLENE CYLINDERS - FILLING CONDITIONS AND FILLING INSPECTION (ISO 11372:2011) |
BS EN ISO 80000-5:2013
|
Quantities and units Thermodynamics |
BS EN ISO 80000-12:2013
|
Quantities and units Solid state physics |
I.S. EN 62884-1:2017
|
MEASUREMENT TECHNIQUES OF PIEZOELECTRIC, DIELECTRIC AND ELECTROSTATIC OSCILLATORS - PART 1: BASIC METHODS FOR THE MEASUREMENT |
UNE-EN ISO 13088:2013
|
Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
EN ISO 1183-1:2012
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
EN 14531-1:2015
|
Railway applications - Methods for calculation of stopping and slowing distances and immobilization braking - Part 1: General algorithms utilizing mean value calculation for train sets or single vehicles |
ISO 17089-1:2010
|
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas Part 1: Meters for custody transfer and allocation measurement |
IEC 60050-212:2010
|
International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
ISO 17871:2015
|
Gas cylinders Quick-release cylinder valves Specification and type testing |
I.S. EN ISO 17078-3:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 3: RUNNING TOOLS, PULLING TOOLS AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
DIN EN ISO 1628-1:2012-10
|
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometer - Part 1: General principles (ISO 1628-1:2009 + Amd 1:2012); German version EN ISO 1628-1:2009 + A1:2012 |
UNI EN ISO 8536-4 : 2013
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
BS EN ISO 17078-2:2007
|
Petroleum and natural gas industries. Drilling and production equipment Flow-control devices for side-pocket mandrels |
UNE-EN ISO 4375:2015
|
Hydrometry - Cableway systems for stream gauging (ISO 4375:2014) |
EN ISO 80000-11:2013
|
Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
UNE-EN ISO 10462:2014
|
Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) |
EN ISO 13088:2012
|
Gas cylinders - Acetylene cylinder bundles - Filling conditions and filling inspection (ISO 13088:2011) |
UNI CEI EN ISO 80000-8 : 2007
|
QUANTITIES AND UNITS - PART 8: ACOUSTICS |
EN ISO 12213-3:2009
|
Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
EN ISO 24431:2016
|
Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) |
UNI EN ISO 17078-2 : 2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
UNI EN ISO 12213-3 : 2010
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 3: CALCULATION USING PHYSICAL PROPERTIES |
UNI EN 13802 : 2014
|
RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - HYDRAULIC DAMPERS |
UNI EN ISO 12213-2 : 2010
|
NATURAL GAS - CALCULATION OF COMPRESSION FACTOR - PART 2: CALCULATION USING MOLAR-COMPOSITION ANALYSIS |
UNI EN 764-2 : 2012
|
PRESSURE EQUIPMENT - PART 2: QUANTITIES, SYMBOLS AND UNITS |
BS ISO 19634:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics). Ceramic composites. Notations and symbols |
UNI EN ISO 1183-1 : 2013
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD |
BIS IS/ISO 80000-5 : 2007
|
QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
DIN EN ISO 80000-5 E : 2013
|
QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007) |
UNI CEI ISO 80000-11 : 2009
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
DIN EN ISO 80000-11:2013-08
|
Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) |
UNE-EN ISO 80000-9:2014
|
Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
06/30126364 DC : 0
|
IEC 80000-14 - QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
UNE-EN ISO 8536-13:2017
|
Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
BS EN 80000-6:2008
|
Quantities and units Electromagnetism |
13/30243616 DC : 0
|
BS EN ISO 4375 - HYDROMETRIC DETERMINATIONS - CABLEWAY SYSTEMS FOR STREAM GAUGING |
ONORM EN ISO 1628-1 : 2012
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009 + AMD 1:2012) |
BS ISO 22967:2010
|
Forced draught gas burners |
BS EN 80000-14:2009
|
Quantities and units Telebiometrics related to human physiology |
06/30126386 DC : DRAFT AUG 2006
|
IEC 80000-6 - QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
BS ISO 9928-1:2015
|
Cranes. Crane operating manual General |
IEEE/ASTM SI 10-2016
|
American National Standard for Metric Practice |
BS ISO 80000-11 : 2008
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS |
ISO 21360-1:2012
|
Vacuum technology Standard methods for measuring vacuum-pump performance Part 1: General description |
I.S. EN ISO 80000-12:2013
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS (ISO 80000-12:2009) |
BS ISO 17089-1:2010
|
Measurement of fluid flow in closed conduits. Ultrasonic meters for gas Meters for custody transfer and allocation measurement |
UNI CEI 70099 : 2008
|
INTERNATIONAL VOCABULARY OF METROLOGY - BASIC AND GENERAL CONCEPTS AND ASSOCIATED TERMS (VIM) |
NF EN 80000-6 : 2008
|
QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
BIS IS/ISO 80000-12 : 2009
|
QUANTITIES AND UNITS - PART 12: SOLID STATE PHYSICS |
DIN EN ISO 13088 E : 2013
|
GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
UNI CEI EN ISO 80000-5 : 2013
|
QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
UNI CEI EN ISO 80000-10 : 2013
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
UNE-EN ISO 80000-12:2014
|
Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
API 19G3 : 2011
|
RUNNING TOOLS, PULLING TOOLS, AND KICK-OVER TOOLS AND LATCHES FOR SIDE-POCKET MANDRELS |
I.S. EN ISO 80000-10:2013
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
DIN EN ISO 80000-5:2016-02 (Draft)
|
QUANTITIES AND UNITS - PART 5: THERMODYNAMICS (ISO 80000-5:2007) |
UNI EN 14531-6 : 2009
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
UNI EN ISO 13088 : 2012
|
GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION |
I.S. EN ISO 10961:2012
|
GAS CYLINDERS - CYLINDER BUNDLES - DESIGN, MANUFACTURE, TESTING AND INSPECTION (ISO 10961:2010) |
EN ISO 17871:2015
|
Gas cylinders - Quick-release cylinder valves - Specification and type testing (ISO 17871:2015) |
ISO 1183-1:2012
|
Plastics Methods for determining the density of non-cellular plastics Part 1: Immersion method, liquid pyknometer method and titration method |
DIN EN 14531-1:2016-05
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
DIN EN ISO 13769:2016-05 (Draft)
|
GAS CYLINDERS - STAMP MARKING |
CEI UNI EN ISO 80000-8 : 2010
|
QUANTITIES AND UNITS - PART 8: ACOUSTICS |
BS EN ISO 1183-1:2012
|
Plastics. Methods for determining the density of non-cellular plastics Immersion method, liquid pyknometer method and titration method |
BS EN ISO 10462:2013
|
Gas cylinders. Acetylene cylinders. Periodic inspection and maintenance |
ISO 17089-2:2012
|
Measurement of fluid flow in closed conduits - Ultrasonic meters for gas — Part 2: Meters for industrial applications |
I.S. EN ISO 1183-1:2012
|
PLASTICS - METHODS FOR DETERMINING THE DENSITY OF NON-CELLULAR PLASTICS - PART 1: IMMERSION METHOD, LIQUID PYKNOMETER METHOD AND TITRATION METHOD (ISO 1183-1:2012) |
IEC 62884-1:2017
|
Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement |
I.S. EN ISO 8536-4:2013
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010) |
BS EN ISO 8536-4 : 2013
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED |
DIN EN 13802:2014-03
|
Railway applications - Suspension components - Hydraulic dampers |
DIN EN ISO 8536-4:2013-07
|
INFUSION EQUIPMENT FOR MEDICAL USE - PART 4: INFUSION SETS FOR SINGLE USE, GRAVITY FEED (ISO 8536-4:2010 + AMD 1:2013) |
I.S. EN ISO 80000-8:2007
|
QUANTITIES AND UNITS - PART 8: ACOUSTICS |
ISO 10297:2014
|
Gas cylinders — Cylinder valves — Specification and type testing |
ISO 24431:2016
|
Gas cylinders Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) Inspection at time of filling |
EN ISO 80000-8 : 2007
|
QUANTITIES AND UNITS - PART 8: ACOUSTICS |
BS EN ISO 17871 : 2015
|
GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
BS EN ISO 4375:2014
|
Hydrometry. Cableway systems for stream gauging |
UNE-EN ISO 10297:2015
|
Gas cylinders - Cylinder valves - Specification and type testing (ISO 10297:2014, Corrected version 2014-11-01) |
ISO 17078-2:2007
|
Petroleum and natural gas industries — Drilling and production equipment — Part 2: Flow-control devices for side-pocket mandrels |
IEC 80000-6:2008
|
Quantities and units - Part 6: Electromagnetism |
ISO 8536-13:2016
|
Infusion equipment for medical use Part 13: Graduated flow regulators for single use with fluid contact |
UNE-CEN/TR 14473:2014 IN
|
Transportable gas cylinders - Porous materials for acetylene cylinders |
UNE-EN 13802:2014
|
Railway applications - Suspension components - Hydraulic dampers |
ISO 12213-3:2006
|
Natural gas Calculation of compression factor Part 3: Calculation using physical properties |
ISO 80000-5:2007
|
Quantities and units Part 5: Thermodynamics |
ISO 12213-2:2006
|
Natural gas Calculation of compression factor Part 2: Calculation using molar-composition analysis |
IEC 80000-14:2008
|
Quantities and units - Part 14: Telebiometrics related to human physiology |
ISO 11372:2011
|
Gas cylinders — Acetylene cylinders — Filling conditions and filling inspection |
ISO 10462:2013
|
Gas cylinders — Acetylene cylinders — Periodic inspection and maintenance |
BS EN ISO 1628-1 : 2009
|
PLASTICS - DETERMINATION OF THE VISCOSITY OF POLYMERS IN DILUTE SOLUTION USING CAPILLARY VISCOMETERS - PART 1: GENERAL PRINCIPLES (ISO 1628-1:2009) |
ISO 15136-1:2009
|
Petroleum and natural gas industries — Progressing cavity pump systems for artificial lift — Part 1: Pumps |
ISO 80000-12:2009
|
Quantities and units Part 12: Solid state physics |
ISO 8536-4:2010
|
Infusion equipment for medical use Part 4: Infusion sets for single use, gravity feed |
ISO 80000-10:2009
|
Quantities and units Part 10: Atomic and nuclear physics |
ISO 1628-1:2009
|
Plastics Determination of the viscosity of polymers in dilute solution using capillary viscometers Part 1: General principles |
UNE-EN ISO 12213-2:2010
|
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
BS EN 764-2:2012
|
Pressure equipment Quantities, symbols and units |
ISO 11810-2:2007
|
Lasers and laser-related equipment Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Part 2: Secondary ignition |
UNE-EN ISO 12213-3:2010
|
Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) |
ISO 17078-3:2009
|
Petroleum and natural gas industries Drilling and production equipment Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels |
BS EN ISO 10297 : 2014
|
GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING |
ISO 80000-9:2009
|
Quantities and units Part 9: Physical chemistry and molecular physics |
ISO 80000-8:2007
|
Quantities and units Part 8: Acoustics |
ISO 80000-11:2008
|
Quantities and units Part 11: Characteristic numbers |
UNE-EN ISO 3807:2014
|
Gas cylinders - Acetylene cylinders - Basic requirements and type testing (ISO 3807:2013, Corrected version 2013-11-15) |
BS EN ISO 11810-2:2009
|
Lasers and laser-related equipment. Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers Secondary ignition |
ISO 10961:2010
|
Gas cylinders Cylinder bundles Design, manufacture, testing and inspection |
ISO 13088:2011
|
Gas cylinders — Acetylene cylinder bundles — Filling conditions and filling inspection |
EN ISO 8536-13:2016
|
Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) |
EN ISO 80000-10:2013
|
Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
EN ISO 4375:2014
|
Hydrometry - Cableway systems for stream gauging (ISO 4375:2014) |
EN ISO 80000-12:2013
|
Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) |
EN ISO 11810-2:2009
|
Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patient-protective covers - Part 2: Secondary ignition (ISO 11810-2:2007) |
EN ISO 17078-3:2009
|
Petroleum and natural gas industries - Drilling and production equipment - Part 3: Running tools, pulling tools and kick-over tools and latches for side-pocket mandrels (ISO 17078-3:2009) |
EN ISO 15136-1:2009
|
Petroleum and natural gas industries - Progressing cavity pump systems for artificial lift - Part 1: Pumps (ISO 15136-1:2009) |
EN ISO 80000-9:2013
|
Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009 + Amd 1:2011) |
EN ISO 10297:2014/A1:2017
|
GAS CYLINDERS - CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 10297:2014/AMD 1:2017) |
EN ISO 80000-5:2013
|
Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2007) |
EN ISO 11810:2015
|
Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO 11810:2015) |
EN 4500-001:2012
|
Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules |
EN 13802:2013
|
Railway applications - Suspension components - Hydraulic dampers |
EN ISO 12213-2:2009
|
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
EN 14531-6:2009
|
Railway applications - Methods for calculation of stopping and slowing distances and immobilisation braking - Part 6: Step by step calculations for train sets or single vehicles |
DIN EN ISO 80000-9 E : 2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
UNE-EN 80000-14:2011
|
Quantities and units - Part 14: Telebiometrics related to human physiology |
16/30343594 DC : 0
|
BS EN ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
BIS IS/ISO 80000-7 : 2008
|
QUANTITIES AND UNITS - PART 7: LIGHT |
I.S. EN 80000-6:2008
|
QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
I.S. EN ISO 80000-11:2013
|
QUANTITIES AND UNITS - PART 11: CHARACTERISTIC NUMBERS (ISO 80000-11:2008) |
12/30250646 DC : 0
|
BS EN 14531-2 - RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 2: STEP BY STEP CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
ISO 22967:2010
|
Forced draught gas burners |
DIN EN 14531-6:2009-12
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILISATION BRAKING - PART 6: STEP BY STEP CALCULATIONS FOR TRAIN SETS OR SINGLE VEHICLES |
BS ISO 12242:2012
|
Measurement of fluid flow in closed conduits. Ultrasonic transit-time meters for liquid |
BS ISO 80000-10 : 2009
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
08/30126399 DC : DRAFT MAY 2008
|
BS ISO 80000-10 - QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS |
PD CEN/TR 14473:2014
|
Transportable gas cylinders. Porous materials for acetylene cylinders |
UNE-IEC 60050-212:2011
|
International Electrotechnical Vocabulary (IEV) - Part 212: Electrical insulating solids, liquids and gases |
DIN EN ISO 17871 E : 2015
|
GAS CYLINDERS - QUICKRELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
BS ISO 18437-1:2012
|
Mechanical vibration and shock. Characterization of the dynamic mechanical properties of visco-elastic materials Principles and guidelines |
DIN EN ISO 13088:2013-01
|
GAS CYLINDERS - ACETYLENE CYLINDER BUNDLES - FILLING CONDITIONS AND FILLING INSPECTION (ISO 13088:2011) |
DIN EN ISO 3807:2015-02
|
GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING |
17/30361469 DC : 0
|
BS EN ISO 80000-8 - QUANTITIES AND UNITS - PART 8: ACOUSTICS |
07/30126390 DC : 0
|
BS ISO 80000-7 - QUANTITIES AND UNITS - PART 7: LIGHT |
16/30300291 DC : 0
|
BS ISO 19613 - FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - MEASUREMENT OF VISCOSITY OF CERAMIC SLURRY BY USE OF A ROTATIONAL VISCOMETER |
BIS IS/IEC 80000-14 : 2008
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
I.S. EN 14531-1:2015
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
DD CEN/TR 13233 : 2007
|
ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
UNI CEI ISO 80000-5 : 2009
|
QUANTITIES AND UNITS - PART 5: THERMODYNAMICS |
16/30339669 DC : 0
|
BS ISO 21010 - CRYOGENIC VESSELS - GAS/MATERIALS COMPATIBILITY |
UNI CEI EN ISO 4375 : 2015
|
HYDROMETRY - CABLEWAY SYSTEMS FOR STREAM GAUGING |
BIS IS/ISO 80000-8 : 2007
|
QUANTITIES AND UNITS - PART 8: ACOUSTICS |
API 19G2 : 2010
|
FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
ISO 9928-1:2015
|
Cranes Crane operating manual Part 1: General |
08/30126370 DC : DRAFT APR 2008
|
BS ISO 80000-1 - QUANTITIES AND UNITS - PART 1: GENERAL |
UNI CEI EN ISO 80000-9 : 2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS |
UNI EN ISO 13769 : 2009
|
GAS CYLINDERS - STAMP MARKING |
DIN EN ISO 80000-10 E : 2013
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
I.S. EN ISO 3807:2013
|
GAS CYLINDERS - ACETYLENE CYLINDERS - BASIC REQUIREMENTS AND TYPE TESTING (ISO 3807:2013, CORRECTED VERSION 2013-11-15) |
BS EN 14531-1 : 2015
|
RAILWAY APPLICATIONS - METHODS FOR CALCULATION OF STOPPING AND SLOWING DISTANCES AND IMMOBILIZATION BRAKING - PART 1: GENERAL ALGORITHMS UTILIZING MEAN VALUE CALCULATION FOR TRAIN SETS OR SINGLE VEHICLES |
PREN 4500-001 : 200P2
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
UNE-EN ISO 80000-10:2013
|
Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) |
I.S. EN ISO 80000-9:2013
|
QUANTITIES AND UNITS - PART 9: PHYSICAL CHEMISTRY AND MOLECULAR PHYSICS (ISO 80000-9:2009 + AMD 1:2011) |
I.S. EN ISO 24431:2016
|
GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
ISO 16249:2013
|
Springs — Symbols |
I.S. EN ISO 17871:2015
|
GAS CYLINDERS - QUICK-RELEASE CYLINDER VALVES - SPECIFICATION AND TYPE TESTING (ISO 17871:2015) |
ISO 18437-4:2008
|
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 4: Dynamic stiffness method |
UNE-EN ISO 1183-1:2013
|
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2012) |
UNI CEI EN 80000-6 : 2009
|
QUANTITIES AND UNITS - PART 6: ELECTROMAGNETISM |
I.S. EN 4500-001:2012
|
AEROSPACE SERIES - METALLIC MATERIALS - RULES FOR DRAFTING AND PRESENTATION OF MATERIAL STANDARDS - PART 001: GENERAL RULES |
I.S. EN 80000-14:2009
|
QUANTITIES AND UNITS - PART 14: TELEBIOMETRICS RELATED TO HUMAN PHYSIOLOGY |
BS ISO 80000-7:2008
|
Quantities and units Light |
DIN EN ISO 24431:2015-08 (Draft)
|
GAS CYLINDERS - SEAMLESS, WELDED AND COMPOSITE CYLINDERS FOR COMPRESSED AND LIQUEFIED GASES (EXCLUDING ACETYLENE) - INSPECTION AT TIME OF FILLING (ISO 24431:2016) |
S.R. CEN TR 13233:2007
|
ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
ISO 18437-1:2012
|
Mechanical vibration and shock — Characterization of the dynamic mechanical properties of visco-elastic materials — Part 1: Principles and guidelines |
EN ISO 17078-2:2007/AC:2009
|
PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - PART 2: FLOW-CONTROL DEVICES FOR SIDE-POCKET MANDRELS |
DIN EN ISO 12213-2:2010-01
|
Natural gas - Calculation of compression factor - Part 2: Calculation using molar-composition analysis (ISO 12213-2:2006) |
ISO 4375:2014
|
Hydrometry Cableway systems for stream gauging |
BS EN ISO 11810:2015
|
Lasers and laser-related equipment. Test method and classification for the laser resistance of surgical drapes and/or patient protective covers. Primary ignition, penetration, flame spread and secondary ignition |
14/30262701 DC : 0
|
BS EN ISO 17871 - GAS CYLINDERS - QUICK OPENING VALVES - SPECIFICATION AND TYPE TESTING |
BS EN ISO 15136-1:2001
|
Downhole equipment for petroleum and natural gas industries. Progressing cavity pump systems for artificial lift Pumps |
ISO 3807:2013
|
Gas cylinders — Acetylene cylinders — Basic requirements and type testing |
BS EN ISO 12213-2:2009
|
Natural gas. Calculation of compression factor Calculation using molar-composition analysis |
ISO 11810:2015
|
Lasers and laser-related equipment Test method and classification for the laser resistance of surgical drapes and/or patient protective covers Primary ignition, penetration, flame spread and secondary ignition |
DIN EN ISO 80000-10:2013-08
|
QUANTITIES AND UNITS - PART 10: ATOMIC AND NUCLEAR PHYSICS (ISO 80000-10:2009) |
EN ISO 11372:2011
|
Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) |
DIN EN ISO 11810:2016-06
|
LASERS AND LASER-RELATED EQUIPMENT - TEST METHOD AND CLASSIFICATION FOR THE LASER RESISTANCE OF SURGICAL DRAPES AND/OR PATIENT PROTECTIVE COVERS - PRIMARY IGNITION, PENETRATION, FLAME SPREAD AND SECONDARY IGNITION (ISO 11810:2015) |
DIN SPEC 4002-102:2011-05
|
PROPERTIES AND THEIR SCOPES FOR PRODUCT DATA EXCHANGE - PART 102: UNITS AND QUANTITIES ON WWW.DINSML.NET |