Skip to content
Please enter a keyword to search

  • ISO 898-1:2013

    Current The latest, up-to-date edition.

    Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s): 

    Published date:  14-01-2013

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO 898-1:2013 specifies mechanical and physical properties of bolts, screws and studs made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Fasteners (the term used when bolts, screws and studs are considered all together) that conform to the requirements of ISO 898-1:2013 are evaluated at that ambient temperature range. They might not retain the specified mechanical and physical properties at elevated temperatures (see Annex B) and/or lower temperatures.

    Certain bolts and screws might not fulfil the tensile or torsional requirements of ISO 898-1:2013 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head.

    ISO 898-1:2013 is applicable to bolts, screws and studs

    • made of carbon steel or alloy steel,
    • having triangular ISO metric screw thread in accordance with ISO 68-1,
    • with coarse pitch thread M1,6 to M39, and fine pitch thread M8×1 to M39×3,
    • with diameter/pitch combinations in accordance with ISO 261 and ISO 262, and
    • having thread tolerances in accordance with ISO 965-1, ISO 965-2 and ISO 965-4.

    It is not applicable to set screws and similar threaded fasteners not under tensile stress (see ISO 898-5).

    It does not specify requirements for such properties as weldability, corrosion resistance resistance to shear stress, torque/clamp force performance (for test method, see ISO 16047), or fatigue resistance.

    General Product Information - (Show below) - (Hide below)

    Committee ISO/TC 2/SC 11
    Development Note Supersedes ISO 898-3 (04/2001) Supersedes ISO/DIS 898-1 and SAE J 121M. (01/2013) Corrigendum 1 applies to French version only. (04/2013)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    03/319820 DC : DRAFT DEC 2003 EN 1515-3 - FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED
    BS EN ISO 14582:2013 Fasteners. Hexalobular socket countersunk head screws, high head
    BS ISO 19355:2016 Ships and marine technology. Marine cranes. Structural requirements
    UNE-EN ISO 7380-2:2012 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
    14/30298880 DC : 0 BS EN ISO 2320 - FASTENERS - PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES
    04/30113142 DC : DRAFT MAY 2004 ISO 6182-2 - FIRE PROTECTION. AUTOMATIC SPRINKLER SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR WET ALARM VALVES, RETARD CHAMBERS AND WATER MOTOR ALARMS
    DIN EN ISO 14582 E : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
    DIN ISO 8082-1:2016-06 Self-propelled machinery for forestry - Laboratory tests and performance requirements for roll-over protective structures - Part 1: General machines (ISO 8082-1:2009)
    I.S. EN 74-1:2005 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
    I.S. EN 24014:1992 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
    ISO 15698-1:2012 Steel for the reinforcement of concrete — Headed bars — Part 1: Requirements
    09/30202626 DC : 0 BS EN ISO 12474 - HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
    DIN EN 15865:2009-08 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
    16/30341197 DC : 0 BS EN 13565-1 - FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    12/30254917 DC : DRAFT JAN 2012 BS EN 877 - CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    10/30199074 DC : 0 BS ISO 6162-1 - HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
    03/319369 DC : DRAFT NOV 2003 ISO 16047 - FASTENERS - TORQUE/CLAMP FORCE TESTING
    UNE-EN 15882-1:2013 Extended application of results from fire resistance tests for service installations - Part 1: Ducts
    BS 7316:1990 Specification for design and construction of screw and related type compressors for the process industry
    BS ISO 8082-1:2009 Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures General machines
    16/30341790 DC : 0 BS EN 60335-2-47 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-47: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC BOILING PANS
    13/30275387 DC : 0 BS ISO 20332 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES
    DIN EN 15865 E : 2009 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
    UNI EN 1090-3 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    15/30320416 DC : 0 BS EN 1090-2 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    10/30234610 DC : DRAFT NOV 2010 BS EN 14420-3 - HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    GOST R ISO 8082 : 2005 SELF-PROPELLED MACHINERY FOR FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES - PERFORMANCE REQUIREMENTS AND TEST METHODS
    02/710618 DC : DRAFT SEP 2002 BS EN 13852-2 - CRANES - OFFSHORE CRANES - PART 2: FLOATING CRANES
    DIN EN ISO 21457:2010-12 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
    BS 6607-3:1993 Tool shanks with 7/24 taper for automatic tool changers Specification for tapers for spindle noses
    DIN ISO 2936:2016-10 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS (ISO 2936:2014)
    04/30113151 DC : DRAFT MAY 2004 ISO 6182-6 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 6: REQUIREMENTS AND TEST METHODS FOR CHECK VALVES
    CSA M5700 : 2009 TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - STATIC TEST METHOD AND ACCEPTANCE CONDITIONS
    DIN ISO 8082-2:2016-06 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM (ISO 8082-2:2011)
    15/30319577 DC : 0 BS ISO 15501-2 - ROAD VEHICLES - COMPRESSED NATURAL GAS (CNG) FUEL SYSTEMS - PART 2: TEST METHODS
    BS ISO 2936:1995 Assembly tools for screws and nuts. Hexagon socket screw keys
    UNE-EN ISO 12474:2011 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
    16/30322067 DC : 0 BS EN 13001-3-1:2012 AMD 2 - CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    02/107768 DC : DRAFT DEC 2002 BS EN 74-1 - COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 1: COUPLERS FOR TUBES - REQUIREMENTS AND TEST PROCEDURES
    BS EN ISO 4210-2:2015 Cycles. Safety requirements for bicycles Requirements for city and trekking, young adult, mountain and racing bicycles
    08/30184289 DC : DRAFT SEP 2008 BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
    CSA M8082 : 2005 : R2015 SELF-PROPELLED MACHINERY FOR FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    PREN 50119 : DRAFT 2017 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
    17/30360051 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    I.S. EN 1515-4:2009 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
    04/19970079 DC : DRAFT JULY 2004 BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - REQUIREMENTS AND TEST METHODS FOR GROOVED END PIPE COUPLINGS
    04/30113148 DC : DRAFT MAY 2004 ISO 6182-5 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR DELUGE VALVES
    ISO 2936:2014 Assembly tools for screws and nuts Hexagon socket screw keys
    UNE-EN 1993-1-8:2013 Eurocode 3: Design of steel structures - Part 1-8: Design of joints
    BS 7635(1993) : 1993 AMD 8439 SPECIFICATION FOR SLOTTED CHEESE HEAD SCREWS: PRODUCT GRADE A
    BS ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread. Small series. Product grade A
    BS EN 13565-1 : 2003 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    CSA M12003-2 : 2009 : FR AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROPS
    06/30110083 DC : 0 ISO 20332-1 - CRANES - PROOF OF COMPETENCE OF STEEL STRUCTURES - PART 1: GENERAL
    BS EN 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 bar (41,3 MPa)
    NF ISO 9270-2 : 2010 7/24 TAPER FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF
    VDMA 24408 : DRAFT 2015 LIMIT OF THE SCOPE OF THE EUROPEAN CONSTRUCTION PRODUCTS REGULATION 305/2011/EU WITH RESPECT TO PROCESS PLANT AND AMENDMENTS TO HARMONIZED STANDARDS UNDER THE EUROPEAN PRESSURE EQUIPMENT DIRECTIVE
    BIS IS 2269 : 2006 HEXAGON SOCKET HEAD CAP SCREWS
    NF EN ISO 12474 : 2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
    DIN EN ISO 7380-1:2011-11 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
    DIN EN ISO 3471:2010-01 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008); German version EN ISO 3471:2008
    DIN ISO 8083 E : 2016 MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS) - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS (ISO 8083:2006)
    PREN 14399-8 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
    ISO 27850:2013 Tractors for agriculture and forestry — Falling object protective structures — Test procedures and performance requirements
    DIN EN 15609 E : 2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
    BIS IS 12427 : 2001 FASTENERS - THREADED STEEL FASTENERS - HEXAGON HEAD TRANSMISSION TOWER BOLTS - SPECIFICATION
    ISO 7076-3:2016 Fire protection Foam fire extinguishing systems Part 3: Medium expansion foam equipment
    PREN 3794 : 200P1 AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF TORQUE STRENGTH ON THREADED FASTENERS
    SAE USCAR 35 : 2007 TEST PROCEDURES FOR EVALUATING BOLT-LOAD RETENTION OF MAGNESIUM ALLOYS
    DIN EN 14399-10:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
    S.R. CEN TS 1992-4-1:2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
    UNI ISO 10262 : 2008 EARTH-MOVING MACHINERY - HYDRAULIC EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR OPERATOR PROTECTIVE GUARDS
    I.S. EN 13445-2:2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    ISO 8082-1:2009 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Part 1: General machines
    I.S. EN 13565-1:2004 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    I.S. EN ISO 16047:2005 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005)
    UNI EN 74-2 : 2009 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
    BS EN 13001-3-1 : 2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    ISO 5480:1979 Shipbuilding Guardrails for cargo ships
    EN 14399-8:2007 High-strength structural bolting assemblies for preloading - Part 8: System HV - Hexagon fit bolt and nut assemblies
    ISO 8010:1988 Compressors for the process industry — Screw and related types — Specifications and data sheets for their design and construction
    DD CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete General
    UNI EN 13001-3-1 : 2013 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    UNE-EN 74-2:2010 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
    13/30286967 DC : 0 BS EN 1992-4 - EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
    UNE-EN ISO 12215-9:2013 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
    16/30336501 DC : 0 BS EN 16951-2 - RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
    UNI EN ISO 8676 : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    16/30319005 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    DIN EN 1090-3:2008-09 EXECUTION OF STEEL AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL RULES FOR EXECUTION OF ALUMINIUM STRUCTURES
    MSS SP 124 : 2016 FABRICATED TAPPING SLEEVES
    I.S. EN 15865:2009 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
    BS EN 12285-1:2003 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and non-flammable water polluting liquids
    DIN EN 12285-1:2016-10 (Draft) WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    EN 15048-1:2016 Non-preloaded structural bolting assemblies - Part 1: General requirements
    IEC 60335-2-37:2017 Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers
    I.S. EN ISO 16136:2006 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 10642:2004 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004)
    EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
    I.S. EN 13480-2:2017 METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
    I.S. EN ISO 16138:2006 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 16139:2006 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 21787:2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
    I.S. EN ISO 16135:2006 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
    ONORM EN ISO 16139 : 2008 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 16137:2006 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
    BS EN 13480-2:2017 Metallic industrial piping Materials
    DIN EN 14399-2:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING
    DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    DIN EN ISO 7045:2011-12 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
    DIN EN ISO 10642:2013-04 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004 + AMD 1:2012)
    DIN EN 14359 E : 2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
    DIN EN ISO 21670:2014-09 FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
    BS EN ISO 7085:1999 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
    BS EN ISO 13628-1 : 2005 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
    BS EN 12259-3:2000 Fixed firefighting systems. Components for sprinkler and water spray systems Dry alarm valve assemblies
    BS EN 13531 : 2001 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    BS EN ISO 4762:2004 Hexagon socket head cap screws
    UNE-EN ISO 4014:2011 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
    BS EN ISO 7045:2011 Pan head screws with type H or type Z cross recess. Product grade A
    BS EN 877 : 1999 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    BS EN ISO 16135:2006 Industrial valves. Ball valves of thermoplastic materials
    BS EN 14399-1:2015 High-strength structural bolting assemblies for preloading General requirements
    14/30278953 DC : 0 BS ISO 17842-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
    BS EN 12259-2:1999 Fixed firefighting systems. Components for sprinkler and water spray systems Wet alarm valve assemblies
    ISO 4016:2011 Hexagon head bolts Product grade C
    BS EN ISO 14579:2011 Hexalobular socket head cap screws
    BS EN 1662:1998 Hexagon bolts with flange. Small series
    ISO 7085:1999 Mechanical and performance requirements of case hardened and tempered metric thread rolling screws
    BS EN 14420-3:2013 Hose fittings with clamp units Clamp units, bolted or pinned
    BS EN ISO 16139:2006 Industrial valves. Gate valves of thermoplastic materials
    ISO 10964:1993 Adhesives — Determination of torque strength of anaerobic adhesives on threaded fasteners
    I.S. EN ISO 21269:2004 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
    I.S. EN ISO 2010:2011 SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A (ISO 2010:2011)
    I.S. EN ISO 4018:2011 HEXAGON HEAD SCREWS - PRODUCT GRADE C
    I.S. EN ISO 7045:2011 PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7045:2011)
    I.S. EN 877:2000 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 15609:2012 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
    DIN EN ISO 4017:2015-05 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
    DIN EN 13411-5:2009-02 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    DIN EN 12952-14:2004-09 Water-tube boilers and auxiliary installations - Part 14: Requirements for fluegas DENOX systems using liquified pressurized ammonia and ammonia water solution
    DIN ISO 965-1:1999-11 ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
    CEN/TS 1992-4-1:2009 Design of fastenings for use in concrete - Part 4-1: General
    EN 12259-5:2002 Fixed firefighting systems - Components for sprinkler and water spray systems - Part 5: Water flow detectors
    EN 13411-5:2003+A1:2008 Terminations for steel wire ropes - Safety - Part 5: U-bolt wire rope grips
    EN 12285-2 : 2005 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    UNI EN 877 : 2007 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 12561-6:2011 (edition 2) Railway applications - Tank wagons - Part 6: Manholes
    EN 12259-3:2000/A2:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 3: DRY ALARM VALVE ASSEMBLIES
    DIN EN 1090-2:2011-10 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    EN 13001-3-1:2012+A2:2018 Cranes - General Design - Part 3-1: Limit States and proof competence of steel structure
    CEN/TS 13001-3-1:2004/AC:2006 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    EN ISO 3471:2008 Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements (ISO 3471:2008)
    EN 877:1999/A1:2006/AC:2008 CAST IRON PIPES AND FITTINGS, THEIR JOINTS AND ACCESSORIES FOR THE EVACUATION OF WATER FROM BUILDINGS - REQUIREMENTS, TEST METHODS AND QUALITY ASSURANCE
    EN 12979:2002 Automotive LPG-systems - Installation requirements
    EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings - Dimensions and technical terms of delivery
    EN 13531:2001+A1:2008 Earth-moving machinery - Tip-over protection structure (TOPS) for compact excavators - Laboratory tests and performance requirements (ISO 12117:1997 modified)
    DIN EN 14399-8:2008-03 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
    NBR 15926-2 : 2011 ERRATA 2011 EQUIPMENT AMUSEMENT PARK - PART 2: SAFETY REQUIREMENTS PROJECT
    ONORM EN 15001-1 : 2011 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
    DEFSTAN 02-313/1(2000) : 2000 AMD 1 2002 DIESEL ENGINES FOR MARINE PROPULSION AND AUXILIARY MACHINERY
    NF EN ISO 4018 : 2011 HEXAGON HEAD SCREWS - PRODUCT GRADE C
    ONORM B 1995-1-1 : 2015 EUROCODE 5: DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS - NATIONAL SPECIFICATIONS FOR THE IMPLEMENTATION OF ONORM EN 1995-1-1, NATIONAL COMMENTS AND NATIONAL SUPPLEMENTS
    ONORM EN ISO 7380-2 : 2011 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR (ISO 7380-2:2011)
    ONORM EN ISO 14581 : 2013 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS (ISO 14581:2013)
    ONORM EN ISO 7380-1 : 2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS (ISO 7380-1:2011)
    02/108142 DC : DRAFT DEC 2002 BS EN ISO 3449 - EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    EN 14423:2013+A1:2016 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    10/30165716 DC : 0 BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD
    ISO 20332:2016 Cranes Proof of competence of steel structures
    17/30364387 DC : 0 BS EN 50069 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
    DIN 787:2005-02 Bolts and screws for T-slots
    13/30277104 DC : 0 BS EN 14389-1 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
    BS ISO 27850:2013 Tractors for agriculture and forestry. Falling object protective structures. Test procedures and performance requirements
    09/30203245 DC : 0 BS ISO 7380-2 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 2: BUTTON HEAD WITH COLLAR (HEAD SHAPE B)
    I.S. EN 1090-3:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    DIN EN 15609:2012-07 LPG equipment and accessories - LPG propulsion systems for boats, yachts and other craft
    06/30150470 DC : DRAFT MAY 2006 ISO 12003-1 - AGRICULTURAL AND FORESTRY TRACTORS NARROW-TRACK WHEELED TRACTORS - PART 1: FRONT-MOUNTED ROLL-OVER PROTECTIVE STRUCTURES
    I.S. EN 24018:1992 HEXAGONAL HEAD SCREWS - PRODUCT GRADES C
    PREN 1090-3 : DRAFT 2017 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    BS ISO 8082:2003 Self-propelled machinery for forestry. Roll-over protective structures. Laboratory tests and performance requirements
    DIN ISO 8083:2016-06 MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS) - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS (ISO 8083:2006)
    11/30237817 DC : 0 BS ISO 7076-2 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 2: LOW EXPANSION FOAM EQUIPMENT
    09/30208217 DC : 0 BS ISO 1207 - SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
    DIN EN 15001-1:2011-02 Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    UNE-EN 15048-1:2018 Non-preloaded structural bolting assemblies - Part 1: General requirements
    I.S. EN ISO 16228:2018 FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017)
    NF ISO 8082-1 : 2011 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 1: GENERAL MACHINES
    17/30341013 DC : DRAFT AUG 2017 BS EN 50119 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
    DIN ISO 8082-2 E : 2016 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM (ISO 8082-2:2011)
    DIN EN ISO 4210-2:2015-12 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES - PART 2: REQUIREMENTS FOR CITY AND TREKKING, YOUNG ADULT, MOUNTAIN AND RACING BICYCLES (ISO 42102:2015)
    10/30234330 DC : DRAFT DEC 2010 BS EN 12561-6 - RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
    BS ISO 16858:2013 Ships and marine technology. Loose gear of lifting appliances on ships. Pulleys
    11/30215604 DC : 0 BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
    11/30237814 DC : 0 BS ISO 7076-1 - FIRE PROTECTION - FOAM FIRE EXTINGUISHING SYSTEMS - PART 1: FOAM PROPORTIONING EQUIPMENT
    BS ISO 5480:1979 Shipbuilding. Guardrails for cargo ships
    07/30166055 DC : 0 BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
    DIN 3015-2:1999-01 Fastening clamps - Block clamps - Part 2: Heavy duty (S)
    11/30232899 DC : 0 BS ISO 6162-2 - HYDRAULIC FLUID POWER - FLANGE CONNECTIONS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS, PORTS AND MOUNTING SURFACES FOR USE AT A PRESSURE OF 42 MPA (420 BAR), DN 13 TO DN 76
    DIN 3015-1:1999-01 Fastening clamps - Block clamps - Part 1: Light duty (L)
    BS EN 15609:2012 LPG equipment and accessories. LPG propulsion systems for boats, yachts and other craft
    ONORM EN 1515-4 : 2010 FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG
    UNI EN 1515-4 : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
    04/19969165 DC : 0 BS EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE ALARM VALVE ASSEMBLIES
    12/30264722 DC : 0 BS ISO 965-1 - ISO GENERAL-PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA
    BS HD 60269-2:2013 Low-voltage fuses Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to K
    PREN 14389-2 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
    DD CEN/TS 13001-3-1 : 2004 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    NF ISO 10643 : 2010 DIMENSIONS OF ACCESSORIES FOR CUTTER ARBORS WITH PARALLEL KEY AND TENON DRIVE
    03/314812 DC : DRAFT SEP 2003 ISO 13628-1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
    08/30184358 DC : 0 BS ISO 9270-1 - 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF
    06/30150478 DC : DRAFT MAY 2006 ISO 12003-2 - AGRICULTURAL AND FORESTRY TRACTORS NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROLL-OVER PROTECTIVE STRUCTURES
    PREN 1090-2 : DRAFT 2015 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    09/30155621 DC : 0 BS ISO 15698-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - HEADED BARS - PART 2: TEST METHODS
    UNI CEN/TS 1992-4-1 : 2009 DESIGN OF FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
    UNE 135314:2017 Vertical signs. Galvanized steel profiles used as post of the signs, side posters and directional signs. Moving supporting elements. Screw products. Characteristics and test methods.
    CSA M12003-1:2009 AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 1: FRONT-MOUNTED ROPS
    08/30184361 DC : 0 BS ISO 9270-2 - 7/24 TAPERS FOR SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 2 - DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS J AND JF
    BS EN 15865:2009 Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
    04/30113145 DC : DRAFT MAY 2004 ISO 6182-3 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR DRY PIPE VALVES
    IS 1367 : Part 1 : 2014 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS
    CAN/CSA-M3471 : 2005(R2015) EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    DIN 3015-3:1999-01 Fastening clamps - Block clamps - Part 3: Double clamps (Z)
    UNE-EN 1090-2:2011 Execution of steel structures and aluminium structures - Part 2: Technical requirements for steel structures
    DIN EN ISO 7380-2:2011-11 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
    DIN ISO 3269:1992-12 FASTENERS - ACCEPTANCE INSPECTION
    API 17L1 : 2013 SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
    UNI EN ISO 14582 : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD
    EN 1366-5:2010 Fire resistance tests for service installations - Part 5: Service ducts and shafts
    UNE-EN 14399-1:2016 High-strength structural bolting assemblies for preloading - Part 1: General requirements
    UNE-EN 14399-4:2016 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
    DIN EN 61518:2002-06 MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA)
    NF EN ISO 7380-2 : 2011 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
    IEC 60269-2:2013+AMD1:2016 CSV Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    ISO 9270:1992 7/24 tapers for tool shanks for automatic changing Tapers for spindle noses
    ISO 16858:2013 Ships and marine technology — Loose gear of lifting appliances on ships — Pulleys
    I.S. EN ISO 7380-2:2011 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
    DIN EN 14399-8:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
    IEC 60335-2-64:2002+AMD1:2007+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-64: Particular requirements for commercial electric kitchen machines
    BS EN ISO 7380-2:2011 Button head screws Hexagon socket button head screws with collar
    BS EN 1090-2 : 2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    16/30328759 DC : 0 BS EN 13814-1 - SAFETY OF AMUSEMENT RIDES AND AMUSEMENT DEVICES - PART 1: DESIGN AND MANUFACTURE
    UNI EN ISO 21457 : 2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
    BS EN 15882-1 : 2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS
    I.S. EN ISO 12474:2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
    I.S. EN ISO 11243:2016 CYCLES - LUGGAGE CARRIERS FOR BICYCLES - REQUIREMENTS AND TEST METHODS (ISO 11243:2016)
    BS EN 13611:2015 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels. General requirements
    I.S. HD 60269-2-1:2005 LOW-VOLTAGE FUSES - PART 2-1: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - SECTIONS 1 TO 6: EXAMPLES OF TYPES OF STANDARDIZED FUSES
    I.S. CEN TS 13001-3-1:2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    ISO 8082-2:2011 Self-propelled machinery for forestry Laboratory tests and performance requirements for roll-over protective structures Part 2: Machines having a rotating platform with a cab and boom on the platform
    ISO 8678:1988 Cup head square neck bolts with small head and short neck Product grade B
    ISO 8082:2003 Self-propelled machinery for forestry Roll-over protective structures Laboratory tests and performance requirements
    EN 15882-1:2011+A1:2017 Extended application of results from fire resistance tests for service installations - Part 1: Ducts
    PREN ISO 1207 : DRAFT 2009 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
    PREN 14399-10 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
    UNI EN ISO 12215-9 : 2012 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES
    UNI EN 14399-10 : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
    ISO 15071:2011 Hexagon bolts with flange Small series Product grade A
    SAE J 518/3 : 2015 HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED
    ISO 8992:2005 Fasteners — General requirements for bolts, screws, studs and nuts
    UNI EN ISO 7048 : 2011 CROSS-RECESSED CHEESE HEAD SCREWS
    EN 13565-1:2003+A1:2007 Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components
    DIN EN 1090-2:2015-07 (Draft) EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    UNI EN 1090-2 : 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    ONORM EN ISO 16136 : 2008 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
    I.S. EN 50119:2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
    ONORM EN ISO 16137 : 2008 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
    DIN EN 877:2010-01 Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance (includes Amendment A1:2006 and Corrigendum AC:2008)
    DIN EN 13411-5 E : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    DIN EN 12285-2:2005-05 WORKSHOP FABRICATED STEEL TANKS - PART 2: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE ABOVEGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    DIN EN 1993-1-8:2010-12 Eurocode 3: Design of steel structures - Part 1-8: Design of joints (includes Corrigendum AC:2009)
    DIN EN ISO 8676:2011-07 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
    DIN EN ISO 8765:2011-06 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
    DIN EN 14475:2006-04 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
    DIN EN ISO 898-5:2012-09 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
    DIN EN 14359:2011-04 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
    BS EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs
    UNE-EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
    UNE-EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
    ISO 16136:2006 Industrial valves Butterfly valves of thermoplastics materials
    UNE-EN ISO 21670:2015 Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)
    ONORM EN ISO 10642 : 2013 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004+AMD 1:2012)
    BS EN ISO 10440-2:2001 Petroleum and natural gas industries. Rotary-type positive-displacement compressors Packaged air compressors (oil-free)
    ISO 10642:2004 Hexagon socket countersunk head screws
    BS EN 15048-1:2007 Non-preloaded structural bolting assemblies General requirements
    UNE-EN ISO 7046-1:2012 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011)
    BS EN 14389-1:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Acoustical characteristics
    UNE-EN ISO 2010:2012 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
    BS EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess. Product grade A
    BS EN 1665:1997 Hexagon bolts with flange. Heavy series
    I.S. EN 1366-1:2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
    EN 1366-1:2014 Fire resistance tests for service installations - Part 1: Ventilation ducts
    I.S. EN ISO 4762:2004 HEXAGON SOCKET HEAD CAP SCREWS
    I.S. EN 14389-2:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
    I.S. EN 14399-3:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
    I.S. EN 14399-4:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
    I.S. EN ISO 14583:2011 HEXALOBULAR SOCKET PAN HEAD SCREWS
    I.S. EN ISO 21670:2014 FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
    I.S. EN ISO 7085:2000 MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS
    DIN EN 74-1:2005-12 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
    DIN EN ISO 7046-2:2011-12 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
    OVE/ONORM EN 50119 : 2014 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
    DIN EN ISO 7380:2004-05 HEXAGON SOCKET BUTTON HEAD SCREWS
    DIN EN 24014:1992-02 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
    DIN EN 14420-3:2013-09 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    I.S. EN ISO 8676:2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    DIN EN 13611:2019-06 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    I.S. EN ISO 2320:2015 FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015)
    DIN EN ISO 10964:1997-10 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
    I.S. EN ISO 7047:2011 RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A (ISO 7047:2011)
    I.S. EN 13531:2001 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    DIN EN 13852-2:2005-03 Cranes - Offshore cranes - Part 2: Floating cranes
    I.S. EN ISO 7046-2:2011 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS (ISO 7046-2:2011)
    DIN EN 1366-1:2014-12 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
    I.S. EN ISO 4016:2011 HEXAGON HEAD BOLTS - PRODUCT GRADE C
    I.S. EN ISO 14580:2011 HEXALOBULAR SOCKET CHEESE HEAD SCREWS
    I.S. EN ISO 13628-1:2006 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
    I.S. EN ISO 14579:2011 HEXALOBULAR SOCKET HEAD CAP SCREWS
    I.S. EN ISO 4017:2014 FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
    I.S. EN ISO 1580:2011 SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A (ISO 1580:2011)
    I.S. EN 15048-2:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
    DIN EN ISO 7046-1:2011-12 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)
    I.S. EN ISO 8765:2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    DIN EN 14399-3:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 3: SYSTEM HR - HEXAGON BOLT AND NUT ASSEMBLIES
    I.S. EN ISO 14584:2011 HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
    I.S. EN 14420-3:2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    I.S. EN ISO 7048:2011 CROSS-RECESSED CHEESE HEAD SCREWS
    DIN EN 24017:1992-02 HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
    I.S. EN 12561-6:2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
    I.S. EN 13411-5:2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    I.S. EN ISO 898-5:2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012)
    I.S. EN ISO 1207:2011 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
    I.S. EN ISO 3449:2008 EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    I.S. EN ISO 2009:2011 SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A (ISO 2009:2011)
    I.S. EN 14399-2:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING
    I.S. EN ISO 7046-1:2011 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8 (ISO 7046-1:2011)
    DIN EN 24018:1992-02 HEXAGON HEAD SCREWS - PRODUCT GRADE C
    I.S. EN 14359:2017 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
    I.S. EN 14389-1:2015 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
    I.S. EN 14399-1:2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
    I.S. EN ISO 4014:2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
    BS 6912-6(2000) : 2000 EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    ONORM EN ISO 8676 : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    ONORM EN ISO 4017 : 2015 FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B (ISO 4017:2014)
    NBR ISO 8082-1 : 2016 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 1: GENERAL MACHINES
    NF EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
    NF EN ISO 8676 : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    VDI 2230 Blatt 1:2003-02 Systematic calculation of high duty bolted joints - Joints with one cylindrical bolt
    NF EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    ONORM EN ISO 4016 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADE C
    BS 88-2(2013) : 2013 COR 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
    ONORM EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    NF EN ISO 4016 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADE C
    NBR 11900-4 : 2016 TERMINATIONS FOR STEEL WIRE ROPES - PART 4: WEIGHTLESS AND WEIGHED CLAMPS
    ONORM EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
    ONORM EN ISO 4018 : 2011 HEXAGON HEAD SCREWS - PRODUCT GRADE C
    BS 88-2(2010) : 2010 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO J
    BIS IS/ISO 3471 : 2008(R2017) EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    BS 7321:1990 Specification for design and construction of turbo-type compressors for the process industry
    12/30204616 DC : 0 BS ISO 5700 - TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - STATIC TEST METHOD AND ACCEPTANCE CONDITIONS
    18/30351048 DC : 0 BS ISO 3506-6 - MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 6: GUIDANCE FOR THE SELECTION OF STAINLESS STEELS AND NICKEL ALLOYS FOR FASTENERS
    BS ISO 4162:2012 Hexagon bolts with flange. Small series. Product grade A with driving feature of product grade B
    PREN 14389-1 : DRAFT 2013 ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 1: ACOUSTICAL CHARACTERISTICS
    UNI EN ISO 3471 : 2008 EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    16/30341798 DC : 0 BS EN 60335-2-49 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-49: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC APPLIANCES FOR KEEPING FOOD AND CROCKERY WARM
    UNE-HD 60269-2:2014 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    11/30214913 DC : 0 BS ISO 6182-2 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 2: REQUIREMENTS AND TEST METHODS FOR WET ALARM VALVES, RETARD CHAMBERS AND WATER MOTOR ALARMS
    I.S. EN 15001-1:2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
    BS EN ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
    I.S. EN ISO 10964:1998 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
    I.S. EN ISO 4210-2:2015 CYCLES - SAFETY REQUIREMENTS FOR BICYCLES - PART 2: REQUIREMENTS FOR CITY AND TREKKING, YOUNG ADULT, MOUNTAIN AND RACING BICYCLES (ISO 4210-2:2015)
    BS ISO 19354:2016 Ships and marine technology. Marine cranes. General requirements
    06/30125306 DC : 0 EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
    PREN 50069 : DRAFT 2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS
    15/30280562 DC : 0 BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS
    15/30299570 DC : 0 BS ISO 7195 - NUCLEAR ENERGY - PACKAGINGS FOR THE TRANSPORT OF URANIUM HEXAFLUORIDE (UF[6])
    16/30328642 DC : 0 BS ISO 6182-12 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 12: REQUIREMENTS AND TEST METHODS FOR GROOVED-END COMPONENTS FOR STEEL PIPE SYSTEMS
    DIN ISO 8992:2005-09 Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005)
    BS 6912-6:1992 Safety of earth-moving machinery Specification for falling-object protective structures on earth-moving machinery: Laboratory tests and performance requirements
    ONORM EN 1366-5 : 2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
    CEI 32-12 : 2014 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K
    SAE USCAR 11-1 : 2007 **DUPLICATE RECORD**
    00/707659 DC : DRAFT APR 2000 PREN 13852-1 - CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
    BS EN ISO 3471:2008 Earth-moving machinery. Roll-over protective structures. Laboratory tests and performance requirements
    09/30188143 DC : DRAFT OCT 2009 BS EN 13480-2:2002/A2 - METALLIC INDUSTRIAL PIPING - PART 2: MATERIALS
    09/30167487 DC : 2009 BS ISO 21457 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
    BS 7796:1995 Specification for hydraulic fluid power. Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar). Type 1 metric series and type 11 inch series
    16/30341810 DC : 0 BS EN 60335-2-99 ED 1.0/A1 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-99: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC HOODS
    UNE-ISO 12117-2:2010 Earth-moving machinery -- Laboratory tests and performance requirements for protective structures of excavators -- Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t
    BS EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds Special couplers. Requirements and test procedures
    04/30113154 DC : DRAFT MAY 2004 ISO 6182-8 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 8: REQUIREMENTS AND TEST METHODS FOR PRE-ACTION DRY ALARM VALVES
    17/30347443 DC : DRAFT JUN 2017 BS EN 12480 - GAS METERS - ROTARY DISPLACEMENT GAS METERS
    02/711527 DC : DRAFT SEP 2002 ISO 10684 - FASTENERS - HOT DIP GALVANIZED COATINGS
    15/30332551 DC : 0 BS EN 14399-10 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
    BS ISO 965-4:1998 ISO general purpose metric screw threads. Tolerances Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
    BS ISO 8082-2:2011 Self-propelled machinery for forestry. Laboratory tests and performance requirements for roll-over protective structures Machines having a rotating platform with a cab and boom on the platform
    UNI CEN/TS 13001-3-1 : 2005 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF OF COMPETENCE OF STEEL STRUCTURES
    BS EN 50119 : 2009 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
    14/30260020 DC : 0 BS EN 12285-1 - WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS
    CAN/CSA-M12117 : 2005(R2015) EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    BS ISO 10643:2009 Dimensions of accessories for cutting tools and their attachments
    ISO 19355:2016 Ships and marine technology — Marine cranes — Structural requirements
    ASTM F 2437/F2437M : 2017 : REDLINE Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
    PREN 12285-1 : DRAFT 2016 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NONFLAMMABLE WATER POLLUTING LIQUIDS OTHER THAN FOR HEATING AND COOLING OF BUILDINGS
    CSA M12003-2 : 2009 AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROPS
    CSA M12003-2 : 2009 : R2014 AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 2: REAR-MOUNTED ROPS
    API 17G : 2006 : R2011 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
    BS ISO 12003-1:2008 Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors Front-mounted ROPS
    SAE J 1237 : 2017 METRIC THREAD ROLLING SCREWS
    I.S. EN ISO 14582:2013 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
    ISO 4162:2012 Hexagon bolts with flange Small series Product grade A with driving feature of product grade B
    ISO 16047:2005 Fasteners — Torque/clamp force testing
    I.S. EN 15609:2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
    I.S. EN 74-2:2008 COUPLERS, SPIGOT PINS AND BASEPLATES FOR USE IN FALSEWORK AND SCAFFOLDS - PART 2: SPECIAL COUPLERS - REQUIREMENTS AND TEST PROCEDURES
    EN 13445-2:2014/A2:2018 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    ISO 6305-4:1985 Railway components — Technical delivery requirements — Part 4: Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
    SAE USCAR 10 : 2007 TEST FOR EVALUATING THE TORQUE-TENSION RELATIONSHIP OF BOTH EXTERNAL AND INTERNAL METRIC THREADED FASTENERS
    KTA 3211.1 : 2015 PRESSURE AND ACTIVITY RETAINING COMPONENTS OF SYSTEMS OUTSIDE THE PRIMARY CIRCUIT - PART 1: MATERIALS
    EN 14399-7:2007 High-strength structural bolting assemblies for preloading - Part 7: System HR - Countersunk head bolt and nut assemblies
    I.S. EN ISO 13918:2018 WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING (ISO 13918:2017)
    BIS IS 1363-1 : 2002 HEXAGON HEAD BOLTS, SCREWS AND NUTS OF PRODUCT GRADE 'C' - PART 1: HEXAGON HEAD BOLTS (SIZE RANGE M 5 TO M 64)
    ISO 6164:1994 Hydraulic fluid power Four-screw, one-piece square-flange connections for use at pressures of 25 MPa and 40 MPa (250 bar and 400 bar)
    ISO 12003-2:2008 Agricultural and forestry tractors Roll-over protective structures on narrow-track wheeled tractors Part 2: Rear-mounted ROPS
    ISO/TR 16224:2012 Technical aspects of nut design
    SAE J 518/2 : 2017 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 2: 42 MPA (CODE 62)
    UNI EN ISO 7380-2 : 2012 BUTTON HEAD SCREWS - PART 2: HEXAGON SOCKET BUTTON HEAD SCREWS WITH COLLAR
    EN 1090-2:2008+A1:2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    UNI EN ISO 12474 : 2010 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
    ONORM EN ISO 12215-9 : 2013 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
    SAE J ISO 12117 : MAR 2003 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    ISO 6182-3:2012 Fire protection — Automatic sprinkler systems — Part 3: Requirements and test methods for dry pipe valves
    ISO 6182-2:2012 Fire protection — Automatic sprinkler systems — Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms
    EN ISO 13918:2018 Welding - Studs and ceramic ferrules for arc stud welding (ISO 13918:2017, Corrected version 2018-05)
    ISO 12003-1:2008 Agricultural and forestry tractors Roll-over protective structures on narrow-track wheeled tractors Part 1: Front-mounted ROPS
    DIN EN 13565-1:2016-08 (Draft) FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    ISO 21299:2009 Powered ride-on turf care equipment Roll-over protective structures (ROPS) Test procedures and acceptance criteria
    ISO 19354:2016 Ships and marine technology — Marine cranes — General requirements
    EN ISO 16228:2018 Fasteners - Types of inspection documents (ISO 16228:2017)
    ISO 7380:2004 Hexagon socket button head screws
    ISO 9270-1:2010 7/24 taper spindle noses for automatic tool changers Part 1: Dimensions and designation of spindle noses of forms S and SF
    EN 1090-3:2008 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
    ISO 10303-214:2010 Industrial automation systems and integration Product data representation and exchange Part 214: Application protocol: Core data for automotive mechanical design processes
    EN 12285-1:2003 WORKSHOP FABRICATED STEEL TANKS - PART 1: HORIZONTAL CYLINDRICAL SINGLE SKIN AND DOUBLE SKIN TANKS FOR THE UNDERGROUND STORAGE OF FLAMMABLE AND NON-FLAMMABLE WATER POLLUTING LIQUIDS
    ISO 10643:2009 Dimensions of accessories for cutter arbors with parallel key and tenon drive
    ISO 12117-2:2008 Earth-moving machinery — Laboratory tests and performance requirements for protective structures of excavators — Part 2: Roll-over protective structures (ROPS) for excavators of over 6 t
    UNE-EN 14359:2017 Gas-loaded accumulators for fluid power applications
    I.S. EN 14423:2013 CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    ISO 6182-6:2006 Fire protection Automatic sprinkler systems Part 6: Requirements and test methods for check valves
    ISO 7195:2005 Nuclear energy Packaging of uranium hexafluoride (UF6) for transport
    ISO 8011:1988 Compressors for the process industry Turbo types Specifications and data sheets for their design and construction
    ONORM EN ISO 16138 : 2008 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
    EN ISO 4017:2014 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
    DIN EN ISO 7047:2011-12 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
    DIN EN ISO 7048:2011-07 Cross-recessed cheese head screws (ISO 7048:2011)
    EN 61518:2001/corrigendum:2002 MATING DIMENSIONS BETWEEN DIFFERENTIAL PRESSURE (TYPE) MEASURING INSTRUMENTS AND FLANGED-ON SHUT-OFF DEVICES UP TO 413 BAR (41,3 MPA)
    UNE-EN ISO 4017:2015 Fasteners - Hexagon head screws - Product grades A and B (ISO 4017:2014)
    DIN EN ISO 8765 E : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    DIN EN 14831 E : 2005 FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD
    DIN EN ISO 4762:2004-06 Hexagon socket head cap screws (ISO 4762:2004)
    DIN EN ISO 16135:2006-06 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 1580:2011-12 Slotted pan head screws - Product grade A (ISO 1580:2011)
    ISO 4017:2014 Fasteners Hexagon head screws Product grades A and B
    BS EN 14475:2006 Execution of special geotechnical works. Reinforced fill
    UNE-EN ISO 2320:2017 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
    UNE-EN ISO 1580:2012 Slotted pan head screws - Product grade A (ISO 1580:2011)
    BS EN ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread
    BS EN 13627:2000 Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
    UNE-EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
    ISO 10440-2:2001 Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free)
    IEC 60335-2-50:2002+AMD1:2007+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-50: Particular requirements for commercial electric bains-marie
    BS EN ISO 16138:2006 Industrial valves. Diaphragm valves of thermoplastics materials
    UNE-EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
    UNE-EN 12561-6:2012 Railway applications - Tank wagons - Part 6: Manholes
    ISO 7048:2011 Cross-recessed cheese head screws
    IEC 60335-2-48:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-48: Particular requirements for commercial electric grillers and toasters
    BS EN ISO 4018:2011 Hexagon head screws. Product grade C
    ISO 16135:2006 Industrial valves Ball valves of thermoplastics materials
    ISO 21457:2010 Petroleum, petrochemical and natural gas industries — Materials selection and corrosion control for oil and gas production systems
    UNE-EN ISO 2009:2012 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
    UNI EN 1366-1 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
    ONORM EN 1366-1 : 2014 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: VENTILATION DUCTS
    ONORM EN 1090-2 : 2012 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    UNI EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
    ONORM EN ISO 3506-1 : 2010 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
    EN ISO 7048:2011 Cross-recessed cheese head screws (ISO 7048:2011)
    EN ISO 7085 : 1999 MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS
    EN ISO 3269:2000 FASTENERS - ACCEPTANCE INSPECTION
    UNI EN 14831 : 2005 FASTENERS - TIGHTENING PERFORMANCE - TORQUE/ANGLE SIMPLIFIED TEST METHOD
    UNI EN ISO 8765 : 2011 HEXAGON HEAD BOLTS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    UNI EN ISO 14579 : 2011 HEXALOBULAR SOCKET HEAD CAP SCREWS
    UNI EN ISO 13628-1 : 2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
    UNI EN ISO 2009 : 2012 SLOTTED COUNTERSUNK FLAT HEAD SCREWS - PRODUCT GRADE A
    UNI EN ISO 4016 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADE C
    UNI EN ISO 4017 : 2014 FASTENERS - HEXAGON HEAD SCREWS - PRODUCT GRADES A AND B
    UNI EN 13411-5 : 2009 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    UNI EN 1106 : 2010 MANUALLY OPERATED TAPS FOR GAS BURNING APPLIANCES
    UNI EN ISO 21670 : 2014 FASTENERS - HEXAGON WELD NUTS WITH FLANGE
    UNI EN 13531 : 2009 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    EN ISO 21787:2006 Industrial valves - Globe valves of thermoplastics materials (ISO 21787:2006)
    UNI EN ISO 10644 : 2009 SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
    UNI EN ISO 14580 : 2011 HEXALOBULAR SOCKET CHEESE HEAD SCREWS
    EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
    UNI EN ISO 1207 : 2012 SLOTTED CHEESE HEAD SCREWS - PRODUCT GRADE A
    UNI EN ISO 4014 : 2011 HEXAGON HEAD BOLTS - PRODUCT GRADES A AND B
    UNI EN 14219 : 2006 HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES
    UNI EN ISO 1580 : 2012 SLOTTED PAN HEAD SCREWS - PRODUCT GRADE A
    UNI EN ISO 7045 : 2012 PAN HEAD SCREWS WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
    UNI EN ISO 2010 : 2012 SLOTTED RAISED COUNTERSUNK HEAD SCREWS - PRODUCT GRADE A
    UNI EN ISO 14583 : 2011 HEXALOBULAR SOCKET PAN HEAD SCREWS
    I.S. EN 12979:2002 AUTOMOTIVE LPG-SYSTEMS - INSTALLATION REQUIREMENTS
    UNI EN 1993-1-8 : 2005 EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
    UNI EN 15001-1 : 2009 GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
    UNI EN ISO 7047 : 2012 RAISED COUNTERSUNK HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A
    UNI EN ISO 7046-2 : 2012 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 2: STEEL SCREWS OF PROPERTY CLASS 8.8, STAINLESS STEEL SCREWS AND NON-FERROUS METAL SCREWS
    UNI EN ISO 4018 : 2011 HEXAGON HEAD SCREWS - PRODUCT GRADE C
    UNI EN ISO 898-5 : 2012 MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD
    UNI EN 1854 : 2010 PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES
    UNI EN ISO 7046-1 : 2012 COUNTERSUNK FLAT HEAD SCREWS (COMMON HEAD STYLE) WITH TYPE H OR TYPE Z CROSS RECESS - PRODUCT GRADE A - PART 1: STEEL OF PROPERTY CLASS 4.8
    UNI EN 12561-6 : 2011 RAILWAY APPLICATIONS - TANK WAGONS - PART 6: MANHOLES
    UNI EN 14420-3 : 2013 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    UNI EN ISO 3449 : 2009 EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    UNI EN 14475 : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
    UNI EN ISO 14584 : 2011 HEXALOBULAR SOCKET RAISED COUNTERSUNK HEAD SCREWS
    UNI EN ISO 10642 : 2013 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
    07/30143997 DC : 0 BS ISO 12117-2 - EARTH-MOVING MACHINERY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE STRUCTURES OF EXCAVATORS - PART 2: ROLL OVER PROTECTIVE STRUCTURES (ROPS) FOR EXCAVATORS OF OVER 6 T USED IN EARTH-MOVING
    CSA C83 : 2017 COMMUNICATION AND POWER LINE HARDWARE
    UNI EN ISO 7380-1 : 2012 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
    99/540206 DC : 0 EN 12259-9 - FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 9: DELUGE VALVES
    CSA ISO 8082-2 : 2016 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM
    ISO 898-3:2018 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 3: Flat washers with specified property classes
    ONORM EN ISO 16047 : 2012 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012)
    ISO 16228:2017 Fasteners — Types of inspection documents
    BIS IS 800 : 2007 AMD 1 2012 GENERAL CONSTRUCTION IN STEEL - CODE OF PRACTICE
    15/30294686 DC : 0 BS ISO 19354 - SHIPS AND MARINE TECHNOLOGY - MARINE CRANES - GENERAL REQUIREMENTS
    10/30191247 DC : DRAFT APR 2010 BS EN ISO 13628-16 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 16: SPECIFICATION FOR FLEXIBLE PIPE ANCILLARY EQUIPMENT
    09/30203242 DC : 0 BS ISO 7380-1 - HEXAGON SOCKET BUTTON HEAD SCREWS - PART 1: BUTTON HEAD (HEAD SHAPE A)
    SAE J ISO 3471 : FEB 2003 EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    PD ISO/TR 16224:2012 Technical aspects of nut design
    BS ISO 13628-7 : 2005 AMD 16887 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS
    BS ISO 12003-2:2008 Agricultural and forestry tractors. Roll-over protective structures on narrow-track wheeled tractors Rear-mounted ROPS
    SAE J 1475 : 2014 HYDRAULIC HOSE FITTING FOR MARINE APPLICATIONS
    11/30214916 DC : 0 BS ISO 6182-3 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 3: REQUIREMENTS AND TEST METHODS FOR DRY PIPE VALVES
    I.S. EN 13510:2000 EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    ISO 15501-2:2016 Road vehicles — Compressed natural gas (CNG) fuel systems — Part 2: Test methods
    UNI EN ISO 14581 : 2014 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK FLAT HEAD SCREWS
    DIN EN ISO 4210-2:2015-12 Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015)
    15/30280509 DC : 0 BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY
    07/30161494 DC : 0 BS EN ISO 10644 - SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
    BIS IS 1367-8 : 2014 TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 8: PREVAILING TORQUE TYPE STEEL NUTS - MECHANICAL AND PERFORMANCE PROPERTIES
    IEC 60335-2-36:2017 Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements
    09/30155614 DC : 0 BS ISO 15698-1 - STEEL FOR THE REINFORCEMENT OF CONCRETE - HEADED BARS - PART 1: REQUIREMENTS
    BS ISO 8083:2006 Machinery for forestry. Falling-object protective structures (FOPS). Laboratory tests and performance requirements
    PREN 13565-1 : DRAFT 2016 FIXED FIREFIGHTING SYSTEMS - FOAM SYSTEMS - PART 1: REQUIREMENTS AND TEST METHODS FOR COMPONENTS
    04/30119248 DC : DRAFT SEP 2004 ISO 8083 - MACHINERY FOR FORESTRY - FALLING-OBJECT PROTECTIVE STRUCTURES (FOPS)
    BS EN 1515-4:2009 Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
    11/30215333 DC : 0 BS ISO 6182-5 - FIRE PROTECTION - AUTOMATIC SPRINKLER SYSTEMS - PART 5: REQUIREMENTS AND TEST METHODS FOR DELUGE VALVES
    13/30277107 DC : 0 BS EN 14389-2 - ROAD TRAFFIC NOISE REDUCING DEVICES - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTICAL CHARACTERISTICS
    PREN 15609 : DRAFT 2010 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
    PREN 14592 : DRAFT 2017 TIMBER STRUCTURES - DOWEL-TYPE FASTENERS - REQUIREMENTS
    DIN ISO 965-1:2017-05 ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 1: PRINCIPLES AND BASIC DATA (ISO 965-1:2013)
    16/30342991 DC : 0 BS EN ISO 13918 - WELDING - STUDS AND CERAMIC FERRULES FOR ARC STUD WELDING
    BS ISO 3463:2006 Tractors for agriculture and forestry. Roll-over protective structures (ROPS). Dynamic test method and acceptance conditions
    BS EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries. Materials selection and corrosion control for oil and gas production systems
    BS ISO 6162-1:2012 Hydraulic fluid power. Flange connections with split or one-piece flange clamps and metric or inch screws Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
    11/30241356 DC : 0 BS HD 60269-2 - LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO M
    UNE-EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
    10/30234634 DC : 0 BS EN 14423 - CLAMP TYPE COUPLING ASSEMBLIES FOR USE WITH STEAM HOSES RATED FOR PRESSURES UP TO 18 BAR
    NF ISO 9270-1 : 2010 7/24 TAPER SPINDLE NOSES FOR AUTOMATIC TOOL CHANGERS - PART 1: DIMENSIONS AND DESIGNATION OF SPINDLE NOSES OF FORMS S AND SF
    10/30165712 DC : 0 BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD
    BS EN ISO 7380-1:2011 Button head screws Hexagon socket button head screws
    BS 6912-25(2001) : 2001 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    NF ISO 8082-2 : 2012 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM
    04/30123712 DC : DRAFT OCT 2004 EN 15048-2 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: SUITABILITY TEST
    CSA M3471 : 2005 EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    SAE J 518/1 : 2013 HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
    UNI EN 15865 : 2009 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
    CSA M12117:2005 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    04/30123693 DC : DRAFT OCT 2004 EN 15048-1 - NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
    CSA M5700 : 2009 : R2014 TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - STATIC TEST METHOD AND ACCEPTANCE CONDITIONS
    CSA G401 : 2014 CORRUGATED STEEL PIPE PRODUCTS
    DIN 19207:2004-02 Measurement of fluid flow by means of pressure differential devices - Threaded pipe end and accessories
    DIN ISO 8082-1 E : 2016 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 1: GENERAL MACHINES (ISO 8082-1:2009)
    DIN ISO 3506:1992-12 CORROSION-RESISTANT STAINLESS STEEL FASTENERS - SPECIFICATIONS
    DIN EN 1515-4 E : 2010 FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC
    SAE USCAR 11 : 2007 TORQUE-TENSION TESTING AND EVALUATION OF FASTENER FINISHES
    DIN EN ISO 12215-9:2013-01 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
    I.S. EN ISO 3471:2008 EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    I.S. EN ISO 12215-9:2012 SMALL CRAFT - HULL CONSTRUCTION AND SCANTLINGS - PART 9: SAILING CRAFT APPENDAGES (ISO 12215-9:2012)
    ISO 2698:2016 Diesel engines Clamp-mounted fuel injectors, types 7 and 28
    I.S. EN 13001-3-1:2012 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    BS EN 14399-7:2007 High-strength structural bolting assemblies for preloading System HR. Countersunk head bolt and nut assemblies
    ISO 7076-2:2012 Fire protection - Foam fire extinguishing systems — Part 2: Low expansion foam equipment
    CAN/CSA-ISO 8082-1 : 2016 SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 1: GENERAL MACHINES
    BS EN ISO 16047 : 2005 FASTENERS - TORQUE/CLAMP FORCE TESTING
    UNI EN ISO 16047 : 2012 FASTENERS - TORQUE/CLAMP FORCE TESTING
    ISO 13584-511:2006 Industrial automation systems and integration — Parts library — Part 511: Mechanical systems and components for general use — Reference dictionary for fasteners
    HD 60269-2-1:2005 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
    ISO 8083:2006 Machinery for forestry Falling-object protective structures (FOPS) Laboratory tests and performance requirements
    NF EN 1090-2 : 2009 + A1 2011 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    UNI EN 1366-5 : 2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
    DIN EN ISO 12474:2011-01 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
    17/30348949 DC : 0 BS EN 1090-3 - EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES
    BS EN 14399-10:2009 High-strength structural bolting assemblies for preloading System HRC. Bolt and nut assemblies with calibrated preload
    15/30332548 DC : 0 BS EN 14399-8 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
    PREN 13852 : DRAFT 2000 CRANES - OFFSHORE CRANES - PART 1: GENERAL PURPOSE OFFSHORE CRANES
    SAE USCAR 10-2 : 2007 **DUPLICATE RECORD**
    UNE-EN ISO 14581:2016 Fasteners - Hexalobular socket countersunk flat head screws (ISO 14581:2013)
    UNE-EN 14423:2014 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    I.S. EN 13611:2015 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    EN 12480:2018 Gas meters - Rotary displacement gas meters
    ISO 9270-2:2010 7/24 taper spindle noses for automatic tool changers Part 2: Dimensions and designation of spindle noses of forms J and JF
    PREN 1992-4 : DRAFT 2013 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 4: DESIGN OF FASTENINGS FOR USE IN CONCRETE
    IEC 60335-2-39:2012+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans
    ISO 6162-1:2012 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127
    I.S. EN ISO 21457:2010 PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - MATERIALS SELECTION AND CORROSION CONTROL FOR OIL AND GAS PRODUCTION SYSTEMS
    ISO 4762:2004 Hexagon socket head cap screws
    I.S. EN 15048-1:2016 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
    ONORM EN ISO 16135 : 2008 INDUSTRIAL VALVES - BALL VALVES OF THERMOPLASTICS MATERIALS
    IEC 60913:2013 Railway applications - Fixed installations - Electric traction overhead contact lines
    I.S. EN 12480:2018 GAS METERS - ROTARY DISPLACEMENT GAS METERS
    DIN EN ISO 21787 E : 2006 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    BS EN 13480-2:2017+A3:2018 Metallic industrial piping Materials
    EN ISO 13628-1:2005/A1:2010 PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
    DIN EN 12952-14 E : 2004 WATER-TUBE BOILERS AND AUXILIARY INSTALLATIONS - PART 14: REQUIREMENTS FOR FLUE GAS DENOX-SYSTEMS USING LIQUEFIED PRESSURIZED AMMONIA AND AMMONIA WATER SOLUTION
    DIN EN ISO 16138:2006-06 INDUSTRIAL VALVES - DIAPHRAGM VALVES OF THERMOPLASTICS MATERIALS
    DIN EN 13831:2007-12 Closed expansion vessels with built in diaphragm for installation in water
    DIN EN ISO 16136:2006-06 INDUSTRIAL VALVES - BUTTERFLY VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 21670 E : 2004 FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
    DIN EN 15048-1:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS
    DIN EN 14475 E : 2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
    DIN EN ISO 2320:2016-05 FASTENERS - PREVAILING TORQUE STEEL NUTS - FUNCTIONAL PROPERTIES (ISO 2320:2015)
    DIN EN 13814:2005-06 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    DIN EN ISO 16137:2006-06 INDUSTRIAL VALVES - CHECK VALVES OF THERMOPLASTICS MATERIALS
    DIN EN 15048-2:2016-09 NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 2: FITNESS FOR PURPOSE
    DIN EN ISO 2010:2011-12 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
    DIN EN ISO 3449:2009-07 EARTH-MOVING MACHINERY - FALLING-OBJECT PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    DIN EN ISO 16139:2006-06 INDUSTRIAL VALVES - GATE VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 14584:2011-06 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
    DIN EN ISO 8676 E : 2011 HEXAGON HEAD SCREWS WITH METRIC FINE PITCH THREAD - PRODUCT GRADES A AND B
    DIN EN 26157-3:1991-12 FASTENERS - SURFACE DISCONTINUITIES - BOLTS, SCREWS AND STUDS SUBJECT FOR SPECIAL REQUIREMENTS
    DIN EN 14653-1:2005-07 MANUALLY OPERATED HYDRAULIC SHORING SYSTEMS FOR GROUNDWORK SUPPORT - PART 1: PRODUCT SPECIFICATIONS
    DIN EN ISO 2009:2011-12 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
    BS EN ISO 21670:2014 Fasteners. Hexagon weld nuts with flange
    BS EN ISO 10642 : 2004 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS
    BS EN 1515-3:2005 Flanges and their joints. Bolting Classification of bolt materials for steel flanges, class designated
    BS EN 14399-3:2015 High-strength structural bolting assemblies for preloading System HR. Hexagon bolt and nut assemblies
    UNE-EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
    BS EN 12284:2003 Refrigerating systems and heat pumps. Valves. Requirements, testing and marking
    ISO 21787:2006 Industrial valves Globe valves of thermoplastics materials
    BS EN ISO 10644:2009 Screw and washer assemblies made of steel with plain washers. Washer hardness classes 200 HV and 300 HV
    BS EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds Part 1: Couplers for tubes - Requirements and test procedures
    BS EN ISO 10684:2004 Fasteners. Hot dip galvanized coatings
    BS EN ISO 4014:2011 Hexagon head bolts. Product grades A and B
    BS EN ISO 3269:2001 Fasteners. Acceptance inspection
    ISO 7045:2011 Pan head screws with type H or type Z cross recess Product grade A
    BS EN ISO 13628-7:2006 Petroleum and natural gas industries. Design and operation of subsea production systems Completion/workover riser systems
    UNE-EN 15001-1:2010 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    UNE-EN ISO 7047:2012 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
    BS EN 13411-5 : 2003 TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 5: U-BOLT WIRE ROPE GRIPS
    ISO 13628-1:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 1: General requirements and recommendations
    ISO 3269:2000 Fasteners Acceptance inspection
    BS EN ISO 16137:2006 Industrial valves. Check valves of thermoplastic materials
    ISO 3449:2005 Earth-moving machinery — Falling-object protective structures — Laboratory tests and performance requirements
    IEC 60335-2-47:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-47: Particular requirements for commercial electric boiling pans
    ISO 14579:2011 Hexalobular socket head cap screws
    BS EN ISO 16330:2003 Reciprocating positive displacement pumps and pump units. Technical requirements
    ISO 2320:2015 Fasteners Prevailing torque steel nuts Functional properties
    ISO 13628-7:2005 Petroleum and natural gas industries — Design and operation of subsea production systems — Part 7: Completion/workover riser systems
    BS EN 1366-1:2014 Fire resistance tests for service installations Ventilation ducts
    BS EN ISO 14584:2011 Hexalobular socket raised countersunk head screws
    BS EN 12763:2000 Fibre-cement pipes and fittings for discharge systems for buildings. Dimensions and technical terms of delivery
    ISO 14582:2013 Fasteners — Hexalobular socket countersunk head screws, high head
    BS EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
    UNE-EN 13796-1:2017 Safety requirements for cableway installations designed to carry persons - Carriers - Part 1: Grips, carrier trucks, on-board brakes, cabins, chairs, carriages, maintenance carriers, tow-hangers
    BS EN 14219:2003 Hexagon bolts with flange with metric fine pitch thread. Small series
    BS EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread. Product grades A and B
    EN ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
    I.S. EN 50119:2020 Railway applications - Fixed installations - Electric traction overhead contact lines
    BS EN 28839:1992 Mechanical properties of fasteners. Bolts, screws, studs and nuts made of non-ferrous metals
    BS EN ISO 1207:2011 Slotted cheese head screws. Product grade A
    BS EN ISO 4016:2011 Hexagon head bolts. Product grade C
    BS EN ISO 21787:2006 Industrial valves. Globe valves of thermoplastics materials
    BS EN 14389-2:2015 Road traffic noise reducing devices. Procedures for assessing long term performance Non-acoustical characteristics
    UNE-EN 1366-1:2016 Fire resistance tests for service installations - Part 1: Ventilation ducts
    BS EN ISO 3449:2008 Earth-moving machinery. Falling-object protective structures. Laboratory tests and performance requirements
    UNE-EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
    UNE-EN ISO 7046-2:2012 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
    BS EN 1515-2:2001 Flanges and their joints. Bolting Classification of bolt materials for steel flanges, PN designated
    BS EN ISO 7380:2004 Hexagon socket button head screws
    ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread
    BS EN 15048-2:2007 Non-preloaded structural bolting assemblies Suitability test
    UNE-EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
    BS EN ISO 7048:2011 Cross-recessed cheese head screws
    IEC 60335-2-42:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens
    UNE-EN 1515-4:2010 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
    ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
    UNE-EN ISO 10644:2010 Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
    ISO 11243:2016 Cycles — Luggage carriers for bicycles — Requirements and test methods
    ISO 8676:2011 Hexagon head screws with metric fine pitch thread Product grades A and B
    ISO 7380-1:2011 Button head screws — Part 1: Hexagon socket button head screws
    ISO 16137:2006 Industrial valves Check valves of thermoplastics materials
    ISO 3471:2008 Earth-moving machinery — Roll-over protective structures — Laboratory tests and performance requirements
    UNE-EN 14475:2011 Execution of special geotechnical works - Reinforced fill
    ISO 2009:2011 Slotted countersunk flat head screws Product grade A
    ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 1: Steel screws of property class 4.8
    IEC 60335-2-99:2003+AMD1:2017 CSV Household and similar electrical appliances - Safety - Part 2-99: Particular requirements for commercial electric hoods
    IEC 60269-2-1:2004 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to VI: Examples of types of standardized fuses
    ISO 4014:2011 Hexagon head bolts Product grades A and B
    ISO 10684:2004 Fasteners — Hot dip galvanized coatings
    IEC 60335-2-49:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm
    UNE-EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
    ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread
    BS EN ISO 16136:2006 Industrial valves. Butterfly valves of thermoplastic materials
    IEC 61518:2001 Mating dimensions between differential pressure (type) measuring instruments and flanged-on shut-off devices up to 413 BAR (41,3 MPa)
    ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess Product grade A Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws
    IEC 60335-2-38:2002+AMD1:2008+AMD2:2017 CSV Household and similar electrical appliances - Safety - Part 2-38: Particular requirements for commercial electric griddles and griddle grills
    ISO 7380-2:2011 Button head screws — Part 2: Hexagon socket button head screws with collar
    ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
    BS EN 12259-5:2002 Fixed firefighting systems. Components for sprinkler and water spray systems Water flow detectors
    ISO 1207:2011 Slotted cheese head screws Product grade A
    ISO 14580:2011 Hexalobular socket cheese head screws
    ISO 965-4:1998 ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
    BS EN ISO 1580:2011 Slotted pan head screws. Product grade A
    BS EN ISO 4017:2014 Fasteners. Hexagon head screws. Product grades A and B
    ISO 1580:2011 Slotted pan head screws Product grade A
    EN 13480-2:2017 Metallic industrial piping - Part 2: Materials
    ISO 16139:2006 Industrial valves Gate valves of thermoplastics materials
    ISO 14583:2011 Hexalobular socket pan head screws
    ISO 10644:2009 Screw and washer assemblies made of steel with plain washers — Washer hardness classes 200 HV and 300 HV
    BS EN 1759-1:2004 Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class-designated Steel flanges, NPS 1/2 to 24
    ISO 16330:2003 Reciprocating positive displacement pumps and pump units Technical requirements
    BS EN 1993-1-8:2005 Eurocode 3. Design of steel structures Design of joints
    BS EN ISO 2320:2015 Fasteners. Prevailing torque steel nuts. Functional properties
    I.S. EN ISO 3506-1:2009 MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS
    BS EN 1515-1:2000 Flanges and their joints. Bolting Selection of bolting
    BS EN ISO 14583:2011 Hexalobular socket pan head screws
    BS EN 14359:2017 Gas-loaded accumulators for fluid power applications
    BS EN 13831:2007 Closed expansion vessels with built-in diaphragm for installation in water
    BS EN ISO 14580:2011 Hexalobular socket cheese head screws
    BS EN 14831:2005 Fasteners. Tightening performance. Torque/Angle simplified test method
    BS EN 14399-4:2005 High-strength structural bolting assemblies for preloading System HV. Hexagon bolt and nut assemblies
    BS EN ISO 10964:1997 Adhesives. Determination of torque strength of anaerobic adhesives on threaded fasteners
    UNE-EN ISO 898-5:2013 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
    UNE-EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
    ISO 4018:2011 Hexagon head screws Product grade C
    EN 50119 : 2009 AMD 1 2013 RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
    ISO 8765:2011 Hexagon head bolts with metric fine pitch thread Product grades A and B
    ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess Product grade A
    BS EN 13331-1:2002 Trench lining systems Product specifications
    BS EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread. Product grades A and B
    UNE-EN 14420-3:2014 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
    ISO 12117:1997 Earth-moving machinery — Tip-over protection structure (TOPS) for compact excavators — Laboratory tests and performance requirements
    DIN EN ISO 21787:2006-06 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    DIN EN ISO 14579:2011-06 Hexalobular socket head cap screws (ISO 14579:2011)
    EN 1515-4:2009 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
    EN 28839 : 1991 MECHANICAL PROPERTIES OF FASTENERS - BOLTS, SCREWS, STUDS AND NUTS MADE OF NON-FERROUS METALS (ISO 8839:1986)
    EN 74-2:2008 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
    EN ISO 10440-2:2001 Petroleum and natural gas industries - Rotary-type positive-displacement compressors - Part 2: Packaged air compressors (oil-free) (ISO 10440-2:2001)
    EN 13814:2004 Fairground and amusement park machinery and structures - Safety
    EN ISO 16139:2006 Industrial valves - Gate valves of thermoplastics materials (ISO 16139:2006)
    EN 14359:2017 Gas-loaded accumulators for fluid power applications
    EN 14399-2:2015 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
    EN 14399-1:2015 High-strength structural bolting assemblies for preloading - Part 1: General requirements
    EN ISO 14584:2011 Hexalobular socket raised countersunk head screws (ISO 14584:2011)
    EN ISO 7045:2011 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
    EN ISO 16135:2006 Industrial valves - Ball valves of thermoplastics materials (ISO 16135:2006)
    EN ISO 10964 : 1997 ADHESIVES - DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS
    EN 15001-1:2009 Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
    EN ISO 1207:2011 Slotted cheese head screws - Product grade A (ISO 1207:2011)
    EN ISO 14580:2011 Hexalobular socket cheese head screws (ISO 14580:2011)
    EN ISO 21670:2014 Fasteners - Hexagon weld nuts with flange (ISO 21670:2014)
    EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel screws of property class 4.8 (ISO 7046-1:2011)
    EN ISO 16330 : 2003 RECIPROCATING POSITIVE DISPLACEMENT PUMPS AND PUMP UNITS - TECHNICAL REQUIREMENTS
    EN ISO 7380:2004 Hexagon socket button head screws (ISO 7380:2004)
    EN 14389-2:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 2: Non-acoustical characteristics
    EN 1662:1997/AC:2007 HEXAGON BOLTS WITH FLANGE - SMALL SERIES (ISO/DIS 15071:1996, MODIFIED)
    EN 1515-1:1999 Flanges and their joints - Bolting - Part 1: Selection of bolting
    EN ISO 10684:2004/AC:2009 Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008)
    EN ISO 16136:2006 Industrial valves - Butterfly valves of thermoplastics materials (ISO 16136:2006)
    EN ISO 1580:2011 Slotted pan head screws - Product grade A (ISO 1580:2011)
    EN ISO 14582:2013 Fasteners - Hexalobular socket countersunk head screws, high head (ISO 14582:2013)
    EN 26157-3 : 1991 FASTENERS - SURFACE DISCONTINUITIES - PART 3: BOLTS, SCREWS AND STUDS FOR SPECIAL REQUIREMENTS (ISO 6157-3:1988)
    EN ISO 10642:2004/A1:2012 HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:2004/AMD 1:2012)
    EN ISO 4762:2004 Hexagon socket head cap screws (ISO 4762:2004)
    EN 1993-1-8:2005/AC:2009 EUROCODE 3: DESIGN OF STEEL STRUCTURES - PART 1-8: DESIGN OF JOINTS
    EN ISO 11243:2016 Cycles - Luggage carriers for bicycles - Requirements and test methods (ISO 11243:2016)
    EN ISO 8676:2011 Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011)
    EN ISO 13628-7:2006 Petroleum and natural gas industries - Design and operation of subsea production systems - Part 7: Completion/workover riser systems (ISO 13628-7:2005)
    EN ISO 4018:2011 Hexagon head screws - Product grade C (ISO 4018:2011)
    EN ISO 10644:2009 Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009)
    EN ISO 14579:2011 Hexalobular socket head cap screws (ISO 14579:2011)
    EN ISO 8765:2011 Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011)
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN ISO 4210-2:2015 Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015)
    EN 1515-2:2001 Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
    EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support - Part 1: Product specifications
    EN 15048-2:2016 Non-preloaded structural bolting assemblies - Part 2: Fitness for purpose
    EN 14389-1:2015 Road traffic noise reducing devices - Procedures for assessing long term performance - Part 1: Acoustical characteristics
    EN ISO 7046-2:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel screws and non-ferrous metal screws (ISO 7046-2:2011)
    EN ISO 7047:2011 Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011)
    EN ISO 7380-1:2011 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
    EN ISO 2010:2011 Slotted raised countersunk head screws - Product grade A (ISO 2010:2011)
    EN 14475:2006/AC:2006 EXECUTION OF SPECIAL GEOTECHNICAL WORKS - REINFORCED FILL
    EN ISO 3449:2008 Earth-moving machinery - Falling-object protective structures - Laboratory tests and performance requirements (ISO 3449:2005)
    EN 1515-3:2005 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, class designated
    EN 14399-4:2015 High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies
    EN ISO 7380-2:2011 Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011)
    EN 26157-1 : 1991 FASTENERS - SURFACE DISCONTINUITIES - PART 1: BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS
    EN 1665:1997/AC:2007 HEXAGON BOLTS WITH FLANGE - HEAVY SERIES
    EN ISO 21457:2010 Petroleum, petrochemical and natural gas industries - Materials selection and corrosion control for oil and gas production systems (ISO 21457:2010)
    EN ISO 16138:2006 Industrial valves - Diaphragm valves of thermoplastics materials (ISO 16138:2006)
    ONORM EN 15609 : 2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
    EN ISO 2320:2015 Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015)
    EN ISO 16137:2006 Industrial valves - Check valves of thermoplastics materials (ISO 16137:2006)
    EN 14219:2003/AC:2007 HEXAGON BOLTS WITH FLANGE WITH METRIC FINE PITCH THREAD - SMALL SERIES (ISO 15072:1999, modified)
    EN 20898-7 : 1995 MECHANICAL PROPERTIES OF FASTENERS - PART 7: TORSIONAL TEST AND MINIMUM TORQUES FOR BOLTS AND SCREWS WITH NOMINAL DIAMETERS 1 MM TO 10 MM (ISO 898-7:1992)
    EN 13831:2007 Closed expansion vessels with built in diaphragm for installation in water
    EN ISO 12474:2010 Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010)
    EN 74-1:2005 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 1: Couplers for tubes - Requirements and test procedures
    EN 14399-3:2015 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
    EN ISO 16047:2005/A1:2012 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005/AMD 1:2012)
    EN ISO 21269:2004 Hexagon socket head cap screws with metric fine pitch thread (ISO 21269:2004)
    EN 14831:2005 Fasteners - Tightening performance - Torque/Angle simplified test method
    EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012)
    EN 15865:2009 Adhesives - Determination of torque strength of anaerobic adhesives on threaded fasteners (ISO 10964:1993 modified)
    EN 13852-2:2004 Cranes - Offshore cranes - Part 2: Floating cranes
    EN ISO 2009:2011 Slotted countersunk flat head screws - Product grade A (ISO 2009:2011)
    EN 24766 : 1992 SLOTTED SET SCREWS WITH FLAT POINT
    EN 14420-3:2013 Hose fittings with clamp units - Part 3: Clamp units, bolted or pinned
    09/30196072 DC : 0 BS ISO 8082-2 - SELF-PROPELLED MACHINERY FOR FORESTRY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR ROLL-OVER PROTECTIVE STRUCTURES - PART 2: MACHINES HAVING A ROTATING PLATFORM WITH A CAB AND BOOM ON THE PLATFORM
    05/30114324 DC : DRAFT FEB 2005 EN ISO 14555 - WELDING - ARC STUD WELDING OF METALLIC MATERIALS
    DIN EN ISO 14582:2014-02 FASTENERS - HEXALOBULAR SOCKET COUNTERSUNK HEAD SCREWS, HIGH HEAD (ISO 14582:2013)
    BS ISO 15501-2:2016 Road vehicles. Compressed natural gas (CNG) fuel systems Test methods
    I.S. EN 13814:2005 FAIRGROUND AND AMUSEMENT PARK MACHINERY AND STRUCTURES - SAFETY
    I.S. EN ISO 7380:2004 HEXAGON SOCKET BUTTON HEAD SCREWS
    ISO 13918:2017 Welding — Studs and ceramic ferrules for arc stud welding
    I.S. EN ISO 7380-1:2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
    17/30364380 DC : 0 BS EN 50064 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES
    15/30332545 DC : 0 BS EN 14399-7 - HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
    PREN 14420-3 : DRAFT 2010 HOSE FITTINGS WITH CLAMP UNITS - PART 3: CLAMP UNITS, BOLTED OR PINNED
    12/30257022 DC : 0 BS EN 13611 - SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS OR LIQUID FUELS - GENERAL REQUIREMENTS
    BS EN ISO 11243:2016 Cycles. Luggage carriers for bicycles. Requirements and test methods
    08/30193145 DC : 0 BS EN ISO 13628-1:2005/AMD 1 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 1: GENERAL REQUIREMENTS AND RECOMMENDATIONS
    10/30219378 DC : 0 BS EN 15609 - LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT - INSTALLATION REQUIREMENTS
    16/30328245 DC : 0 BS ISO 6164 - HYDRAULIC FLUID POWER - FOUR-SCREW, ONE-PIECE SQUARE FLANGE CONNECTIONS FOR USE AT PRESSURES OF 42 MPA, DN 10 TO 80
    BS ISO 5700:2013 Tractors for agriculture and forestry. Roll-over protective structures. Static test method and acceptance conditions
    UNE-EN ISO 7380-1:2012 Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011)
    15/30328996 DC : 0 BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28
    DIN 6900-5:2004-09 Screw and washer assemblies with coarse thread - Part 5: With captive conical spring washer
    DIN EN 14399-10 E : 2009 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD
    CSA M3463 : 2009 : R2014 TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - DYNAMIC TEST METHOD AND ACCEPTANCE CONDITIONS
    DIN EN 74-2:2009-01 Couplers, spigot pins and baseplates for use in falsework and scaffolds - Part 2: Special couplers - Requirements and test procedures
    06/30136412 DC : DRAFT AUG 2006 ISO 21299 - POWERED RIDE-ON TURF CARE EQUIPMENT - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - TEST PROCEDURES AND ACCEPTANCE CRITERIA
    DIN EN 1366-5:2010-06 Fire resistance tests for service installations - Part 5: Service ducts and shafts
    PREN 16951-2 : DRAFT 2016 RAILWAY APPLICATIONS - TRACK - NOISE BARRIERS AND RELATED DEVICES ACTING ON AIRBORNE SOUND PROPAGATION - PROCEDURES FOR ASSESSING LONG TERM PERFORMANCE - PART 2: NON-ACOUSTIC CHARACTERISTICS
    ISO 3463:2006 Tractors for agriculture and forestry Roll-over protective structures (ROPS) Dynamic test method and acceptance conditions
    12/30250038 DC : 0 BS ISO 2698 - DIESEL ENGINES - CLAMP-MOUNTED FUEL INJECTORS, TYPES 7 AND 28
    BS EN 15001-1:2009 Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
    02/707699 DC : DRAFT JUN 2002 ISO/DIS 21670 - HEXAGON WELD NUTS WITH FLANGE
    14/30287474 DC : 0 BS EN ISO 11243 - CYCLES - LUGGAGE CARRIERS FOR BICYCLES - REQUIREMENTS AND TEST METHODS
    BS EN 14399-8:2007 High-strength structural bolting assemblies for preloading System HV. Hexagon fit bolt and nut assemblies
    NF EN ISO 7380-1 : 2011 BUTTON HEAD SCREWS - PART 1: HEXAGON SOCKET BUTTON HEAD SCREWS
    ISO 6182-12:2014 Fire protection Automatic sprinkler systems Part 12: Requirements and test methods for grooved-end components for steel pipe systems
    DIN EN 1515-4:2010-04 Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
    DIN ISO 6162-1:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 1: FLANGE CONNECTORS FOR USE AT PRESSURES OF 3,5 MPA (35 BAR) TO 35 MPA (350 BAR), DN 13 TO DN 127
    DIN 3237-1:1994-10 STRAIGHT PATTERN VALVES WITH FLANGE SOCKET IN MAIN POWER CONNECTION - PART 1: WITHOUT LINING
    02/703607 DC : DRAFT FEB 2002 ISO/DIS 7195 - NUCLEAR ENERGY - PACKAGING OF URANIUM HEXAFLUORIDE (UF6) FOR TRANSPORT
    PREN 50064 : DRAFT 2017 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - GAS-FILLED WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES
    16/30341794 DC : 0 BS EN 60335-2-48 ED 4.0/A2 - HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-48: PARTICULAR REQUIREMENTS FOR COMMERCIAL ELECTRIC GRILLERS AND TOASTERS
    17/30335249 DC : 0 BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES
    BS ISO 12117-2 : 2008 EARTH-MOVING MACHINERY - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS FOR PROTECTIVE STRUCTURES OF EXCAVATORS - PART 2: ROLL-OVER PROTECTIVE STRUCTURES (ROPS) FOR EXCAVATORS OF OVER 6 T
    BS ISO 8992:2005 Fasteners. General requirements for bolts, screws, studs and nuts
    CSA B352.0 : 2016 ROLL-OVER PROTECTIVE STRUCTURES (ROPS), FALLING OBJECT PROTECTIVE STRUCTURES (FOPS), OPERATOR PROTECTIVE STRUCTURES (OPS), AND TIP-OVER PROTECTIVE STRUCTURES (TOPS) FOR MOBILE MACHINERY - GENERAL CANADIAN REQUIREMENTS
    ISO 5713:1990 Equipment for working the soil — Fixing bolts for soil working elements
    05/30127446 DC : DRAFT JAN 2005 ISO 13584-511 - INDUSTRIAL AUTOMATION SYSTEMS AND INTEGRATION - PARTS LIBRARY - PART 511: MECHANICAL SYSTEMS AND COMPONENTS FOR GENERAL USE - REFERENCE DICTIONARY FOR FASTENERS
    ISO 17842-1:2015 Safety of amusement rides and amusement devices — Part 1: Design and manufacture
    BS 6912-14:1995 Safety of earth-moving machinery Specification for laboratory tests and performance requirements of roll-over protective structures
    UNE-EN 14399-3:2016 High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies
    CSA M3463 : 2009 TRACTORS FOR AGRICULTURE AND FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES (ROPS) - DYNAMIC TEST METHOD AND ACCEPTANCE CONDITIONS
    CSA M8082 : 2005 SELF-PROPELLED MACHINERY FOR FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    API 17G : 2006 : R2016 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
    SAE J 1102M : 2016 MECHANICAL AND MATERIAL REQUIREMENTS FOR METRIC WHEEL BOLTS
    CSA M12003-1 : 2009 : R2014 AGRICULTURAL AND FORESTRY TRACTORS - ROLL-OVER PROTECTIVE STRUCTURES ON NARROW-TRACK WHEELED TRACTORS - PART 1: FRONT-MOUNTED ROPS
    DIN ISO 6162-2:2006-02 HYDRAULIC FLUID POWER - FLANGE CONNECTORS WITH SPLIT OR ONE-PIECE FLANGE CLAMPS AND METRIC OR INCH SCREWS - PART 2: FLANGE CONNECTORS FOR USE AT PRESSURES OF 35 MPA (350 BAR) TO 40 MPA (400 BAR), DN 13 TO DN 51
    API 17G:2006 RECOMMENDED PRACTICE FOR COMPLETION/WORKOVER RISERS
    PREN 3795 : 200P1 AEROSPACE SERIES - ANAEROBIC POLYMERISABLE COMPOUNDS - TEST METHOD - DETERMINATION OF FREEDOM FROM EXCESSIVE CURE RATE
    PREN 14399-7 : DRAFT 2015 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
    UNE-EN 14399-2:2016 High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading
    KTA 3205.2 : 2015 COR 2016 COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS - PART 2: COMPONENT SUPPORT STRUCTURES WITH NON-INTEGRAL CONNECTIONS FOR PRESSURE AND ACTIVITY-RETAINING COMPONENTS IN SYSTEMS OUTSIDE THE PRIMARY CIRCUIT
    BS ISO 20332:2016 Cranes. Proof of competence of steel structures
    I.S. HD 60269-2:2013 LOW-VOLTAGE FUSES - PART 2: SUPPLEMENTARY REQUIREMENTS FOR FUSES FOR USE BY AUTHORIZED PERSONS (FUSES MAINLY FOR INDUSTRIAL APPLICATION) - EXAMPLES OF STANDARDIZED SYSTEMS OF FUSES A TO K (IEC 60269-2:2013 (MOD))
    BS EN ISO 12215-9:2012 Small craft. Hull construction and scantlings Sailing craft appendages
    I.S. EN 1090-2:2008 EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 2: TECHNICAL REQUIREMENTS FOR STEEL STRUCTURES
    I.S. EN 14399-7:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
    I.S. EN 15882-1:2011 EXTENDED APPLICATION OF RESULTS FROM FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 1: DUCTS
    BS EN 13445-2 : 2014 UNFIRED PRESSURE VESSELS - PART 2: MATERIALS
    UNI ISO 2936 : 2008 ASSEMBLY TOOLS FOR SCREWS AND NUTS - HEXAGON SOCKET SCREW KEYS
    UNE-EN 13445-2:2015 Unfired pressure vessels - Part 2: Materials
    DIN EN 13001-3-1:2013-12 CRANES - GENERAL DESIGN - PART 3-1: LIMIT STATES AND PROOF COMPETENCE OF STEEL STRUCTURE
    ISO 12215-9:2012 Small craft Hull construction and scantlings Part 9: Sailing craft appendages
    ISO 6162-2:2018 Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76
    BS EN 1090-3:2008 Execution of steel structures and aluminium structures Technical requirements for aluminium structures
    BS EN ISO 16228:2018 Fasteners. Types of inspection documents
    UNI EN 14399-8 : 2008 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
    SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
    ISO 15072:2012 Hexagon bolts with flange with metric fine pitch thread Small series Product grade A
    BS EN 1366-5:2010 Fire resistance tests for service installations Service ducts and shafts
    UNE-EN 1090-3:2011 Execution of steel structures and aluminium structures - Part 3: Technical requirements for aluminium structures
    NF ISO 8082 : 2003 SELF-PROPELLED MACHINERY FOR FORESTRY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    XP CEN/TS 1992-4-1 : 2009 XP DESIGN FOR FASTENINGS FOR USE IN CONCRETE - PART 4-1: GENERAL
    UNI EN 15609 : 2012 LPG EQUIPMENT AND ACCESSORIES - LPG PROPULSION SYSTEMS FOR BOATS, YACHTS AND OTHER CRAFT
    DIN EN 13611:2016-09 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    UNE-EN 13611:2016 Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements
    UNE-EN ISO 4210-2:2015 Cycles - Safety requirements for bicycles - Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles (ISO 4210-2:2015)
    PREN 13611 : DRAFT 2017 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    UNE-EN ISO 11243:2017 Cycles - Luggage carriers for bicycles - Requirements and test methods (ISO 11243:2016)
    EN ISO 12215-9:2012 Small craft - Hull construction and scantlings - Part 9: Sailing craft appendages (ISO 12215-9:2012)
    I.S. EN 1366-5:2010 FIRE RESISTANCE TESTS FOR SERVICE INSTALLATIONS - PART 5: SERVICE DUCTS AND SHAFTS
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    BS EN 14423:2013+A2:2019 Clamp type coupling assemblies for use with steam hoses rated for pressures up to 18 bar
    DIN EN 14399-7:2016-01 (Draft) HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES
    ISO 7076-4:2016 Fire protection Foam fire extinguishing systems Part 4: High expansion foam equipment
    ISO 15698-2:2012 Steel for the reinforcement of concrete — Headed bars — Part 2: Test methods
    I.S. EN 14399-8:2007 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES
    ISO 10262:1998 Earth-moving machinery Hydraulic excavators Laboratory tests and performance requirements for operator protective guards
    ISO 5700:2013 Tractors for agriculture and forestry — Roll-over protective structures — Static test method and acceptance conditions
    ISO 6182-5:2012 Fire protection — Automatic sprinkler systems — Part 5: Requirements and test methods for deluge valves
    ISO 6162:1994 Hydraulic fluid power Four-screw split-flange connections for use at pressures of 2,5 MPa to 40 MPa (25 bar to 400 bar) Type I metric series and type II inch series
    ONORM EN ISO 21787 : 2008 INDUSTRIAL VALVES - GLOBE VALVES OF THERMOPLASTICS MATERIALS
    ISO 3506-1:2009 Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs
    ISO 898-7:1992 Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
    DIN EN 1515-3 E : 2005 FLANGES AND THEIR JOINTS - BOLTING - PART 3: CLASSIFICATION OF BOLT MATERIALS FOR STEEL FLANGES, CLASS DESIGNATED
    DIN EN ISO 10684:2011-09 Fasteners - Hot dip galvanized coatings (ISO 10684:2004 + Cor. 1:2008)
    DIN EN 14399-4:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 4: SYSTEM HV - HEXAGON BOLT AND NUT ASSEMBLIES
    DIN EN 13531:2009-08 EARTH-MOVING MACHINERY - TIP-OVER PROTECTION STRUCTURE (TOPS) FOR COMPACT EXCAVATORS - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    DIN EN ISO 10644:2009-10 SCREW AND WASHER ASSEMBLIES MADE OF STEEL WITH PLAIN WASHERS - WASHER HARDNESS CLASSES 200 HV AND 300 HV
    DIN EN ISO 1207:2011-10 Slotted cheese head screws - Product grade A (ISO 1207:2011)
    DIN EN 12561-6:2011-10 Railway applications - Tank wagons - Part 6: Manholes
    DIN EN 14399-1:2015-04 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 1: GENERAL REQUIREMENTS
    DIN EN 24015:1991-12 Hexagon head bolts with reduced shank (shank diameter pitch diameter); product grade B (ISO 4015:1979)
    UNE-EN ISO 7045:2012 Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011)
    BS EN 13852-2:2004 Cranes. Offshore cranes Floating cranes
    ISO 14584:2011 Hexalobular socket raised countersunk head screws
    BS EN 24766:1992 Slotted set screws with flat point
    UNE-EN ISO 14583:2011 Hexalobular socket pan head screws (ISO 14583:2011)
    BS EN 13814:2004 Fairground and amusement park machinery and structures. Safety
    ISO 2010:2011 Slotted raised countersunk head screws Product grade A
    BS EN ISO 7046-1:2011 Countersunk flat head screws (common head style) with type H or type Z cross recess. Product grade A Steel of property class 4.8
    UNE-EN ISO 4016:2011 Hexagon head bolts - Product grade C (ISO 4016:2011)
    BS EN 14399-2 : 2015-02 HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 2: SUITABILITY FOR PRELOADING
    BS EN ISO 2009:2011 Slotted countersunk flat head screws. Product grade A
    BS EN 14653-1:2005 Manually operated hydraulic shoring systems for groundwork support Product specifications
    BS EN 12561-6:2011 Railway applications. Tank wagons Manholes
    ISO 16138:2006 Industrial valves Diaphragm valves of thermoplastics materials
    ISO 4210-2:2015 Cycles — Safety requirements for bicycles — Part 2: Requirements for city and trekking, young adult, mountain and racing bicycles
    BS EN ISO 2010:2011 Slotted raised countersunk head screws. Product grade A
    ISO 21670:2014 Fasteners — Hexagon weld nuts with flange
    01/715268 DC : DRAFT NOV 2001 BS ISO 13628-7 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 7: COMPLETION/WORKOVER RISER SYSTEMS
    BS EN 12979:2002 Automotive LPG systems. Installation requirements
    BS EN 12285-2:2005 Workshop fabricated steel tanks Horizontal cylindrical single skin and double skin tanks for the aboveground storage of flammable and non-flammable water polluting liquids
    BS EN ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread
    BS ISO 17842-1:2015 Safety of amusement rides and amusement devices Design and manufacture
    EN 13331-1:2002 Trench lining systems - Part 1: Product specifications
    DIN EN ISO 4016:2011-06 Hexagon head bolts - Product grade C (ISO 4016:2011)
    DIN EN 14831:2005-07 Fasteners - Tightening performance - Torque/Angle simplified test method
    DIN EN 12259-5:2002-12 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 5: WATER FLOW DETECTORS
    EN 13510:2000/AC:2003 EARTH-MOVING MACHINERY - ROLL-OVER PROTECTIVE STRUCTURES - LABORATORY TESTS AND PERFORMANCE REQUIREMENTS
    EN 12259-2:1999/A2:2005 FIXED FIREFIGHTING SYSTEMS - COMPONENTS FOR SPRINKLER AND WATER SPRAY SYSTEMS - PART 2: WET ALARM VALVE ASSEMBLIES
    DIN EN ISO 14583:2011-06 Hexalobular socket pan head screws (ISO 14583:2011)
    EN 12284 : 2003 REFRIGERATING SYSTEMS AND HEAT PUMPS - VALVES - REQUIREMENTS, TESTING AND MARKING
    I.S. EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    DIN EN ISO 21670:2004-01 FASTENERS - HEXAGON WELD NUTS WITH FLANGE (ISO 21670:2014)
    DIN EN ISO 21269:2004-06 HEXAGON SOCKET HEAD CAP SCREWS WITH METRIC FINE PITCH THREAD
    HD 60269-2:2013 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to K
    DIN EN ISO 4014:2011-06 Hexagon head bolts - Product grades A and B (ISO 4014:2011)
    DIN EN 1515-3:2005-12 Flanges and their joints - Bolting - Part 3: Classification of bolt materials for steel flanges, Class designated
    DIN EN ISO 14580:2011-06 Hexalobular socket cheese head screws (ISO 14580:2011)
    DIN EN ISO 16047:2013-01 FASTENERS - TORQUE/CLAMP FORCE TESTING (ISO 16047:2005 + AMD 1:2012)
    DIN EN 14359:2017-09 GAS-LOADED ACCUMULATORS FOR FLUID POWER APPLICATIONS
    DIN ISO 965-4:2002-05 ISO GENERAL PURPOSE METRIC SCREW THREADS - TOLERANCES - PART 4: LIMITS OF SIZES FOR HOT-DIP GALVANIZED EXTERNAL SCREW THREADS TO MATE WITH INTERNAL SCREW THREADS TAPPED WITH TOLERANCE POSITION H OR G AFTER GALVANIZING
    DIN EN ISO 4018:2011-07 Hexagon head screws - Product grade C (ISO 4018:2011)
    UNE-EN 13480-2:2017 Metallic industrial piping - Part 2: Materials (Endorsed by Asociación Española de Normalización in September of 2019.)
    ASME B1.13M:2005 METRIC SCREW THREADS - M PROFILE
    ASME B1.13M : 2005 (R2015) METRIC SCREW THREADS - M PROFILE
    ASME B18.2.3.4M : 2001 METRIC HEX FLANGE SCREWS
    ASME B1.13M : 2005 : R2010 METRIC SCREW THREADS - M PROFILE
    ASME B18.13.1M : 2011 : R2016 SCREW AND WASHER ASSEMBLIES - SEMS (METRIC SERIES)
    ASME B18.13.1M : 2011 SCREW AND WASHER ASSEMBLIES - SEMS (METRIC SERIES)
    ASME B18.2.3.4M : 2001 : R2006 METRIC HEX FLANGE SCREWS
    ASME B18.2.3.4M : 2001 : R2011 METRIC HEX FLANGE SCREWS
    ASME B18.2.5M : 2013 METRIC 12-POINT FLANGE HEAD SCREWS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 6507-1:2005 Metallic materials Vickers hardness test Part 1: Test method
    ISO 16047:2005 Fasteners — Torque/clamp force testing
    ISO 898-2:2012 Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread
    EN 10269:2013 Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
    AS/NZS ISO 13918:2020 Welding - Studs and ceramic ferrules for arc stud welding
    ISO 898-7:1992 Mechanical properties of fasteners Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
    ISO 10683:2014 Fasteners Non-electrolytically applied zinc flake coatings
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    ISO 10684:2004 Fasteners — Hot dip galvanized coatings
    ISO 4042:1999 Fasteners Electroplated coatings
    ISO 6508-1:2016 Metallic materials — Rockwell hardness test — Part 1: Test method
    ISO 724:1993 ISO general-purpose metric screw threads — Basic dimensions
    ISO 16426:2002 Fasteners — Quality assurance system
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    ISO 965-2:1998 ISO general purpose metric screw threads — Tolerances — Part 2: Limits of sizes for general purpose external and internal screw threads — Medium quality
    ISO 225:2010 Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions
    ISO 898-5:2012 Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread
    ISO 148-1:2016 Metallic materials — Charpy pendulum impact test — Part 1: Test method
    ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
    ISO 965-4:1998 ISO general purpose metric screw threads Tolerances Part 4: Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing
    ISO 68-1:1998 ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads
    ISO 273:1979 Fasteners — Clearance holes for bolts and screws
    ISO 261:1998 ISO general purpose metric screw threads General plan
    ISO 965-1:2013 ISO general purpose metric screw threads — Tolerances — Part 1: Principles and basic data
    ISO 7500-1:2015 Metallic materials Calibration and verification of static uniaxial testing machines Part 1: Tension/compression testing machines Calibration and verification of the force-measuring system
    ISO 1891:2009 Fasteners — Terminology
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective