Skip to content
Please enter a keyword to search

  • ISO/ASTM 51608:2015

    Current The latest, up-to-date edition.

    Practice for dosimetry in an X-ray (bremsstrahlung) facility for radiation processing at energies between 50 keV and 7.5 MeV

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  17-03-2015

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO/ASTM 51608:2015 outlines the dosimetric procedures to be followed during installation qualification, operational qualification, performance qualification and routine processing at an X-ray (bremsstrahlung) irradiator. Other procedures related to operational qualification, performance qualification and routine processing that may influence absorbed dose in the product are also discussed.

    ISO/ASTM 51608:2015 is one of a set of standards that provides recommendations for properly implementing and utilizing dosimetry in radiation processing. It is intended to be read in conjunction with ISO/ASTM Practice 52628, "Practice for Dosimetry in Radiation Processing".

    In contrast to monoenergetic gamma radiation, the X-ray energy spectrum extends from low values (about 35 keV) up to the maximum energy of the electrons incident on the X-ray target.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes ASTM E 1608 (05/2002) Supersedes ISO 15567 (06/2002) Supersedes ISO/ASTM DIS 51608. (03/2015)
    Document Type Standard
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    14/30286829 DC : 0 BS ISO 12749-4 - NUCLEAR ENERGY, NUCLEAR TECHNOLOGIES, AND RADIOLOGICAL PROTECTION - VOCABULARY - PART 4: DOSIMETRY FOR RADIATION PROCESSING
    13/30281229 DC : 0 BS ISO 51956 - PRACTICE FOR USE OF THERMOLUMINESCENCE DOSIMETRY (TLD) SYSTEMS FOR RADIATION PROCESSING
    CSA Z11137-3 : 2007 : R2012 : FR STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    DIN EN ISO 11137-3:2015-08 (Draft) STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    13/30264511 DC : 0 BS ISO/ASTM 52628 - STANDARD PRACTICE FOR DOSIMETRY IN RADIATION PROCESSING
    04/30081279 DC : DRAFT MAY 2004 BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    12/30256719 DC : 0 BS ISO/ASTM 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECTS RELEASE PROGRAMS
    BS ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection. Vocabulary Dosimetry for radiation processing
    14/30303365 DC : 0 BS ISO/ASTM 51649 - PRACTICE FOR DOSIMETRY IN AN ELECTRON BEAM FACILITY FOR RADIATION PROCESSING AT ENERGIES BETWEEN 300 KEV AND 25 MEV
    15/30282559 DC : 0 BS EN ISO 11137-3 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
    BS ISO 14470:2011 Food irradiation. Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
    04/30108676 DC : 0 ISO 51939 - PRACTICE FOR BLOOD IRRADIATION DOSIMETRY
    CSA Z11137-3 : 2007 : R2012 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
    BS EN 60544-1:2013 Electrical insulating materials. Determination of the effects of ionizing radiation Radiation interaction and dosimetry
    AAMI TIR 29:2012(R2017) GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES
    AAMI TIR 29:2012 GUIDE FOR PROCESS CHARACTERIZATION AND CONTROL IN RADIATION STERILIZATION OF MEDICAL DEVICES
    ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
    IEC 60544-1:2013 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry
    I.S. EN ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL (ISO 11137-3:2017)
    ASTM E 2304 : 2003 : R2011 Standard Practice for Use of a LiF Photo-Fluorescent Film Dosimetry System (Withdrawn 2020)
    04/30109485 DC : DRAFT AUG 2004 ISO 51431 - PRACTICE FOR DOSIMETRY IN ELECTRON BEAM AND X-RAY (BREMSSTRAHLUNG) IRRADIATION FACILITIES FOR FOOD PROCESSING
    14/30315832 DC : 0 BS ISO/ASTM 52303 - GUIDE FOR ABSORBED-DOSE MAPPING IN RADIATION PROCESSING FACILITIES
    CEI EN 60544-1 : 2014 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY
    12/30256716 DC : 0 BS ISO/ASTM 51702 - PRACTICE FOR DOSIMETRY IN A GAMMA IRRADIATION FACILITY FOR RADIATION PROCESSING
    CAN/CSA-ISO 11137-3:17 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control (Adopted ISO 11137-3:2017, second edition, 2017-06)
    ISO 14470:2011 Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
    ISO/ASTM 52303:2015 Guide for absorbed-dose mapping in radiation processing facilities
    ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
    ISO 12749-4:2015 Nuclear energy, nuclear technologies, and radiological protection Vocabulary Part 4: Dosimetry for radiation processing
    ISO/ASTM 51940:2013 Guide for dosimetry for sterile insects release programs
    CSA Z11137-3 : 2007 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    ASTM E 2304 : 2003 Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System
    ASTM E 2381 : 2004 : R2010 Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams (Withdrawn 2016)
    CSA Z11137-3 :2007 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    I.S. EN 60544-1:2013 ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY (IEC 60544-1:2013 (EQV))
    ANSI/AAMI/ISO 11137-3:2017 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS OF DEVELOPMENT, VALIDATION AND ROUTINE CONTROL
    ISO/ASTM 51702:2013 Practice for dosimetry in a gamma facility for radiation processing
    ISO 11137-3:2017 Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control
    EN ISO 11137-3:2017 Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017)
    04/30108679 DC : DRAFT FEB 2004 ISO 51940 - GUIDE FOR DOSIMETRY FOR STERILE INSECT RELEASE PROGRAMS
    04/30108670 DC : DRAFT FEB 2004 ISO 51702 - PRACTICE FOR DOSIMETRY IN GAMMA IRRADIATION FACILITIES FOR RADIATION PROCESSING
    12/30259937 DC : 0 BS EN 50544-1 - ELECTRICAL INSULATING MATERIALS - DETERMINATION OF THE EFFECTS OF IONIZING RADIATION - PART 1: RADIATION INTERACTION AND DOSIMETRY
    CSA Z11137-3 : 2007 : R2016 STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 3: GUIDANCE ON DOSIMETRIC ASPECTS
    ASTM F 1356 : 2016 : REDLINE Standard Guide for Irradiation of Fresh, Frozen or Processed Meat and Poultry to Control Pathogens and Other Microorganisms
    ISO/ASTM 51956:2013 Practice for use of a thermoluminescence-dosimetry system (TLD system) for radiation processing
    ASTM E 2303 : 2015 : REDLINE Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
    ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
    ASTM E 2381 : 2004 Standard Guide for Dosimetry In Radiation Processing of Fluidized Beds and Fluid Streams
    BS EN ISO 11137-3:2017 Sterilization of health care products. Radiation Guidance on dosimetric aspects of development, validation and routine control
    EN 60544-1:2013 Electrical insulating materials - Determination of the effects of ionizing radiation - Part 1: Radiation interaction and dosimetry

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 11137-1:2006 Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices
    ISO/ASTM 51702:2013 Practice for dosimetry in a gamma facility for radiation processing
    CFR 21(PTS170-199) : 0 FOOD AND DRUGS - FOOD AND DRUG ADMINISTRATION, CHAPTER 1 DEPARTMENT OF HEALTH AND HUMAN SERVICES - PARTS 170-199
    ISO/ASTM 51818:2013 Practice for dosimetry in an electron beam facility for radiation processing at energies between 80 and 300 keV
    ISO/ASTM 51261:2013 Practice for calibration of routine dosimetry systems for radiation processing
    ASTM E 170 : 2017 : REDLINE Standard Terminology Relating to Radiation Measurements and Dosimetry
    ASTM E 2232 : 2016 : REDLINE Standard Guide for Selection and Use of Mathematical Methods for Calculating Absorbed Dose in Radiation Processing Applications
    ISO/ASTM 51539:2013 Guide for use of radiation-sensitive indicators
    ISO/ASTM 52701:2013 Guide for performance characterization of dosimeters and dosimetry systems for use in radiation processing
    ISO 14470:2011 Food irradiation — Requirements for the development, validation and routine control of the process of irradiation using ionizing radiation for the treatment of food
    ISO/ASTM 51649:2015 Practice for dosimetry in an electron beam facility for radiation processing at energies between 300 keV and 25 MeV
    ISO/ASTM 51707:2015 Guide for estimation of measurement uncertainty in dosimetry for radiation processing
    ISO/ASTM 52628:2013 Standard practice for dosimetry in radiation processing
    ASTM E 2303 : 2015 : REDLINE Standard Guide for Absorbed-Dose Mapping in Radiation Processing Facilities
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective