• ISO/IEC Guide 2:2004

    Current The latest, up-to-date edition.

    Standardization and related activities General vocabulary

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English

    Published date:  03-11-2004

    Publisher:  International Organization for Standardization

    Add To Cart

    Abstract - (Show below) - (Hide below)

    ISO/IEC Guide 2:2004 provides general terms and definitions concerning standardization and related activities. It is intended to contribute fundamentally towards mutual understanding amongst the members of ISO and IEC and the various governmental and non-governmental agencies involved in standardization at international, regional and national levels. It is intended also to provide a suitable source for teaching and for reference, briefly covering basic theoretical and practical principles of standardization, certification and laboratory accreditation.

    It is not the aim of ISO/IEC Guide 2:2004 to duplicate definitions of terms adequately defined for general purposes in other authoritative international vocabularies.

    NOTE 1 From this point of view, particular attention is drawn to the International vocabulary of basic and general terms in metrology (VIM) jointly prepared by ISO, IEC, BIPM, IFCC, IUPAC, IUPAP and OIML, and published in 1993 (second edition).

    NOTE 2 In addition to the terms given in the official languages of ISO and IEC (English, French and Russian), equivalent terms provided by the relevant member bodies are given in the following languages:

    • German (de);
    • Spanish (es);
    • Italian (it);
    • Dutch (nl);
    • Swedish (sv).

    General Product Information - (Show below) - (Hide below)

    Document Type Guide
    Publisher International Organization for Standardization
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    EN 55016-2-3:2017 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
    BS EN 50090-8:2001 Home and building electronic systems (HBES) Conformity assessment of products
    ISO/IEC Guide 21:1999 Adoption of International Standards as regional or national standards
    UNE-ISO 37001:2017 Anti-bribery management systems. Requirements with guidance for use.
    BS 6068-4.16(2003) : 2003 WATER QUALITY - DETECTION AND ENUMERATION OF BACTERIOPHAGES - PART 3: VALIDATION OF METHODS FOR CONCENTRATION OF BACTERIOPHAGES FROM WATER
    08/30182184 DC : DRAFT AUG 2008 BS EN 13263-2 AMD1 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    ISO/IEC 19762:2016 Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary
    15/30300658 DC : 0 BS ISO 16016 - TECHNICAL PRODUCT DOCUMENTATION - PROTECTION NOTICES FOR RESTRICTING THE USE OF DOCUMENTS AND PRODUCTS
    DIN EN ISO/IEC 19796-1:2009-08 INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH
    I.S. EN 13606-1:2007 HEALTH INFORMATICS - ELECTRONIC HEALTH RECORD COMMUNICATION - PART 1: REFERENCE MODEL
    CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
    03/307701 DC : DRAFT JUNE 2003 ISO/IEC 17000 - CONFORMITY ASSESSMENT - GENERAL VOCABULARY
    17/30363625 DC : DRAFT SEP 2017 BS EN ISO 11138-7 - STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - PART 7: GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
    DIN EN ISO 10209:2012-11 TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED DOCUMENTATION (ISO 10209:2012)
    PD 6532-5:1997 Reference materials. Guide to the contents of certificates of reference materials Quality system guidelines for the production of reference materials
    BS PAS 137(2013) : 2013 NANOMATERIALS AND NANOTECHNOLOGY-BASED PRODUCTS - GUIDE TO REGULATION AND STANDARDS
    BS 7079-B6(1996) : 1996 AMD 10698 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - METHODS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS BY THE BRESLE METHOD
    BS ISO 10241-1:2011 Terminological entries in standards General requirements and examples of presentation
    OIML D 18 : 2008 THE USE OF CERTIFIED REFERENCE MATERIALS IN FIELDS COVERED BY METROLOGICAL CONTROL EXERCISED BY NATIONAL SERVICES OF LEGAL METROLOGY. BASIC PRINCIPLES
    PD 6644-1:1999 Proficiency testing by interlaboratory comparisons Development and operation of proficiency testing schemes
    BS ISO 11074:2005 Soil quality. Vocabulary
    CSA ISO/IEC 21827 : 2009 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SYSTEMS SECURITY ENGINEERING - CAPABILITY MATURITY MODEL (SSE-CMM)
    I.S. EN ISO/IEC 19762-1:2012 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 1: GENERAL TERMS RELATING TO AIDC (ISO/IEC 19762-1:2008)
    ISO/TS 19159-1:2014 Geographic information Calibration and validation of remote sensing imagery sensors and data Part 1: Optical sensors
    CSA ISO 14024 : 1999 : R2014 ENVIRONMENTAL LABELS AND DECLARATION - TYPE 1 ENVIRONMENTAL LABELLING - PRINCIPLES AND PROCEDURES
    IEC TS 62768:2012 Preparation and processing of source definitions for data element types - Guidelines for product committees
    16/30342350 DC : 0 BS 0 - A STANDARD FOR STANDARDS - PRINCIPLES OF STANDARDIZATION
    PD 6642:1999 General requirements for bodies providing accreditation of inspection bodies
    S.R. CEN/TR 15840:2009 EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2
    I.S. EN ISO 11074:2015 SOIL QUALITY - VOCABULARY (ISO 11074:2015)
    02/104526 DC : DRAFT JULY 2002 EN 13263-2 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    13/30268868 DC : 0 BS ISO/IEC 25051 - SOFTWARE ENGINEERING - SOFTWARE PRODUCT QUALITY REQUIREMENTS AND EVALUATION (SQUARE) - REQUIREMENTS FOR QUALITY OF COMMERCIAL OFF-THE-SHELF (COTS) SOFTWARE PRODUCT AND INSTRUCTIONS FOR TESTING
    CEI EN 61400-22 : 2011 WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
    BS 4778(1979) : LATEST QUALITY VOCABULARY
    BS ISO/IEC 40180:2017 Information technology. Quality for learning, education and training. Fundamentals and reference framework Part : General approach
    NF EN 16341 : 2012 SELECTION OF STANDARDS AND STANDARD-LIKE DOCUMENTS FOR DEFENCE PRODUCTS AND SERVICES - ORDER OF PREFERENCE
    ISO/IEC Guide 21-2:2005 Regional or national adoption of International Standards and other International Deliverables — Part 2: Adoption of International Deliverables other than International Standards
    BS ISO/IEC 20944-5:2013 Information technology. Metadata Registries Interoperability and Bindings (MDR-IB) Profiles
    13/30264600 DC : 0 BS EN 60747-14-8 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-8: SEMICONDUCTOR SENSORS - CAPACITIVE DEGRADATION SENSOR OF LIQUID
    BIS IS/ISO 15189 : 2012 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE
    BS 7503:1989 General criteria for laboratory accreditation bodies
    01/714318 DC : DRAFT OCT 2001 ISO/DIS 18436-1 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ACCREDITATION OF ORGANIZATIONS AND TRAINING AND CERTIFICATION OF PERSONNEL - PART 1: GENERAL REQUIREMENTS FOR TRAINING AND CERTIFICATION
    11/30215667 DC : 0 BS ISO 14189 - WATER QUALITY - DETECTION AND ENUMERATION OF CLOSTRIDIUM PERFRINGENS - METHOD USING MEMBRANE FILTRATION
    PD ISO/IEC Guide 68:2002 Arrangements for the recognition and acceptance of conformity assessment results
    S.R. CEN ISO/TS 17427:2014 INTELLIGENT TRANSPORT SYSTEMS - COOPERATIVE SYSTEMS - ROLES AND RESPONSIBILITIES IN THE CONTEXT OF COOPERATIVE ITS BASED ON ARCHITECTURE(S) FOR COOPERATIVE SYSTEMS (ISO/TS 17427:2014)
    BS ISO 10303-31:1994 Industrial automation systems and integration. Product data representation and exchange Conformance testing methodology and framework: general concepts
    03/317040 DC : DRAFT NOV 2003 ISO/IEC GUIDE 67 - FUNDAMENTALS OF PRODUCT CERTIFICATION
    PD ISO/TR 18786:2014 Health and safety in welding. Guidelines for risk assessment of welding fabrication activities
    BS ISO 17422:2002 Plastics. Environmental aspects. General guidelines for their inclusion in standards
    ISO 6935-1:2007 Steel for the reinforcement of concrete Part 1: Plain bars
    BS EN ISO 28803:2012 Ergonomics of the physical environment. Application of international standards to people with special requirements
    DEFSTAN 00-00(PT4)/3(2001) : 2001 STANDARDS FOR DEFENCE - PART 4: GUIDE FOR MOD REPRESENTATIVES ON BSI COMMITTEES
    08/30141961 DC : DRAFT MAY 2008 BS ISO/IEC 20944-5 - INFORMATION TECHNOLOGY - METADATA REGISTRY INTEROPERABILITY AND BINDINGS (MDRIB) - PART 5: PROFILES
    04/30114492 DC : DRAFT JUNE 2004 ISO/IEC 19796-1 - INFORMATION TECHNOLOGY - QUALITY MANAGEMENT, ASSURANCE, AND METRICS - PART 1: GENERAL APPROACH
    PD 0026:2003 Software and systems quality framework. A guide to the use of ISO/IEC and other standards for understanding quality in software and systems
    06/30159756 DC : 0 BS ISO/IEC 19781-2 - INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - REGISTRY - PART 1: REGISTRY CONTENT
    PD ISO/IEC GUIDE 71:2014 Guide for addressing accessibility in standards
    07/30172404 DC : DRAFT DEC 2007 BS EN 62047-9 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 9: WAFER TO WAFER BONDING STRENGTH MEASUREMENT FOR MEMS
    BS ISO 10241-2:2012 Terminological entries in standards Adoption of standardized terminological entries
    10/30212556 DC : 0 BS EN 13282-3 - HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
    03/319521 DC : DRAFT NOV 2003 ISO/IEC 17040 - GENERAL REQUIREMENTS FOR PEER ASSESSMENT OF CONFORMITY ASSESSMENT BODIES
    06/30159752 DC : 0 BS ISO/IEC 19781-1 - INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - REGISTRY - PART 1: REGISTRY CONTENT
    NF EN 62020 : 1999 AMD 1 2005 ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
    CSA Z1002 : 2012 : INC : UPD 2 : 2014 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
    CSA Z1416: 2011 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
    CSA ISO/IEC 16500-1 : 2002 : R2015 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 1: SYSTEM REFERENCE MODELS AND SCENARIOS
    ASTM E 1904 : 1999 Guide for General Criteria for a Supplier's Declaration of Conformity (Withdrawn 2004)
    CSA C50069 : 1999 : R2007 WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    IEC 60898-1:2015 Electrical accessories - Circuit-breakers for overcurrent protection for household and similar installations - Part 1: Circuit-breakers for a.c. operation
    BS ISO/IEC 17799 : 2005 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION SECURITY MANAGEMENT
    BS ISO 3534-2:2006 Statistics. Vocabulary and symbols Applied statistics
    CEI UNI 70019 : 2008 CONFORMITY ASSESSMENT ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
    CAN/CSA-C50069-99 (R2016) Welded Composite Enclosures of Cast and Wrought Aluminium Alloys for Gas-Filled High-Voltage Switchgear and Controlgear (Adopted CENELEC Standard EN 50069:1991 including Amendment A1:1993, with Canadian deviations)
    CEI EN 60068-5-2 : 2000 ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS TERMS AND DEFINITIONS
    03/109441 DC : DRAFT JUNE 2003 EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    CSA ISO 14971 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    CSA Z753 : 0 REQUIREMENTS FOR THE COMPETENCE OF ENVIRONMENTAL LABORATORIES
    CSA ISO/IEC 16500-1 : 2002 : R2010 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 1: SYSTEM REFERENCE MODELS AND SCENARIOS
    CEN/TR 15472:2006 Postal services - Measurement of transit times for parcels by the use of a track and trace system
    ISO/TS 21089:2018 Health informatics Trusted end-to-end information flows
    CSA ISO/IEC 14598-4 : 2002 : R2010 SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 4: PROCESS FOR ACQUIRERS
    CAN/CSA-Z1002-12 (R2017) Occupational health and safety - Hazard identification and elimination and risk assessment and control
    I.S. EN 55016-2-3:2017 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
    BS 0:2011 A standard for standards. Principles of standardization
    ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles
    BS ISO/IEC 14598-4:1999 Information technology. Software production evaluation Process for acquirers
    ASTM E 2328 : 2004 Standard Terminology Relating to Seized-Drug Analysis (Withdrawn 2005)
    ISO/IEC Guide 58:1993 Calibration and testing laboratory accreditation systems General requirements for operation and recognition
    UNI EN ISO 13606-1 : 2012 HEALTH INFORMATICS - ELECTRONIC HEALTH RECORD COMMUNICATION - PART 1: REFERENCE MODEL
    ANSI INCITS 429:2008(R2018) INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY FOR ANSI INCITS 358-2002, BIOAPI SPECIFICATION
    CEN/CENELEC GUIDE 33 : 2016 GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN TESTING STANDARDS
    I.S. EN ISO 9308-2:2014 WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 2: MOST PROBABLE NUMBER METHOD (ISO 9308-2:2012)
    ISO/TR 20514:2005 Health informatics Electronic health record Definition, scope and context
    SPE-7002-14 Sustainability standard for household portable and floor care appliances (Bi-national standard, with AHAM 7002-2014 and UL 7002)
    ISO/IEC 16500-1:1999 Information technology Generic digital audio-visual systems Part 1: System reference models and scenarios
    ISO/IEC Guide 51:2014 Safety aspects Guidelines for their inclusion in standards
    I.S. EN 13282-3:2015 HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
    I.S. CEN TR 15472:2006 POSTAL SERVICES - MEASUREMENT OF TRANSIT TIMES FOR PARCELS BY THE USE OF A TRACK AND TRACE SYSTEM
    ISO/IEC 29109-1:2009 Information technology Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Part 1: Generalized conformance testing methodology
    ISO 16142-2:2017 Medical devices — Recognized essential principles of safety and performance of medical devices — Part 2: General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
    ISO 29845:2011 Technical product documentation Document types
    ISO 21927-1:2008 Smoke and heat control systems — Part 1: Specification for smoke barriers
    CSA Z20514 : 2007 HEALTH INFORMATICS - ELECTRONIC HEALTH RECORD - DEFINITION, SCOPE AND CONTEXT
    OIML D 29 : 2008 GUIDE FOR THE APPLICATION OF ISO/IEC GUIDE 65 TO ASSESSMENT OF MEASURING INSTRUMENT CERTIFICATION BODIES IN LEGAL METROLOGY
    I.S. EN ISO 13606-1:2012 HEALTH INFORMATICS - ELECTRONIC HEALTH RECORD COMMUNICATION - PART 1: REFERENCE MODEL (ISO 13606-1:2008)
    ISO/IEC 11179-1:2015 Information technology — Metadata registries (MDR) — Part 1: Framework
    AAMI ISO 14971 : 2007 : INC : ERR 1 : 2007 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    UNE-ISO 22320:2013 Societal security. Emergency management. Requirements for incident response
    ASTM E 1458 : 2012 : R2016 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
    ISO 19208:2016 Framework for specifying performance in buildings
    BS EN 50069 : 1991 SPECIFICATION FOR WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    I.S. EN 14382:2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    NF EN ISO 9308-1 : 2000 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD
    DIN EN 14382 E : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    BS EN 450-2:2005 Fly ash for concrete Conformity evaluation
    ISO/IEC Guide 62:1996 General requirements for bodies operating assessment and certification/registration of quality systems
    EN 197-2:2014 Cement - Part 2: Conformity evaluation
    UNE-EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    BS EN ISO 16091:2002 Space systems. Integrated logistic support
    BS EN 13913:2003 Railway applications. Rubber suspension components. Elastomer-based mechanical parts
    UNE-EN ISO 14161:2010 Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009)
    BS EN 14382 : 2005 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    16/30341979 DC : 0 BS EN ISO 16484-2 - BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: HARDWARE
    BS EN ISO 14161:2009 Sterilization of health care products. Biological indicators. Guidance for the selection, use and interpretation of results
    I.S. EN 13263-2:2005 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    DIN 820-12:2014-06 STANDARDIZATION - PART 12: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:2014)
    I.S. EN ISO 15189:2012 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15)
    EN 13263-2:2005+A1:2009 Silica fume for concrete - Part 2: Conformity evaluation
    BS 0:2016 A STANDARD FOR STANDARDS - PRINCIPLES OF STANDARDIZATION
    CEN ISO/TR 13881:2011 Petroleum and natural gas industries - Classification and conformity assessment of products, processes and services (ISO/TR 13881:2000)
    EN 62309:2004 Dependability of products containing reused parts - Requirements for functionality and tests
    CEN/TS 15674:2007 Air quality - Measurement of stationary source emissions - Guidelines for the elaboration of standardised methods
    EN 13263-1:2005+A1:2009 Silica fume for concrete - Part 1: Definitions, requirements and conformity criteria
    CEN Guide 4:2008 GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
    ONORM EN ISO 15189 : 2014 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE (ISO 15189:2012, CORRECTED VERSION 2014-08-15)
    DEFSTAN 00-00(PT2)/4(2009) : 2009 STANDARDS FOR DEFENCE - PART 2: MANAGEMENT AND PRODUCTION OF DEFENCE STANDARDS
    DEFSTAN 00-00(PT2)/5(2010) : 2010 STANDARDS FOR DEFENCE - PART 2: MANAGEMENT AND PRODUCTION OF DEFENCE STANDARDS
    CEI UNI ISO/IEC 17060:2022 Conformity assessment - Code of good practice
    DEFSTAN 02-43/3(2003) : 2003 ANCILLARY SUPPORT EQUIPMENT, TEST EQUIPMENT AND TOOLS
    DEFSTAN 00-00(PT2)/3(2008) : 2008 STANDARDS FOR DEFENCE - PART 2: MANAGEMENT AND PRODUCTION OF DEFENCE STANDARDS
    I.S. EN ISO 14020:2002 ENVIRONMENTAL LABELS AND DECLARATIONS - GENERAL PRINCIPLES
    DEFSTAN 00-00(PT1)/3(1999) : 1999 STANDARDS FOR DEFENCE - PART 1: MOD UK STANDARDISATION POLICY, ORGANIZATIONS AND IMPLEMENTATION
    14/30295890 DC : 0 BS EN 1330-1 - NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
    UNI EN 16341 : 2014 SELECTION OF STANDARDS AND STANDARD-LIKE DOCUMENTS FOR DEFENCE PRODUCTS AND SERVICES - ORDER OF PREFERENCE
    DIN EN 16341 E : 2012 SELECTION OF STANDARDS AND STANDARD-LIKE DOCUMENTS FOR DEFENCE PRODUCTS AND SERVICES - ORDER OF PREFERENCE
    BS PD ISO/TR 13881 : 2001 PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES
    ASTM E 1301 : 1995 : R2003 Standard Guide for Proficiency Testing by Interlaboratory Comparisons (Withdrawn 2003)
    ASTM E 1301 : 1995 : EDT 1 Standard Guide for Proficiency Testing by Interlaboratory Comparisons
    ISO/IEC 25051:2014 Software engineering Systems and software Quality Requirements and Evaluation (SQuaRE) Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
    08/30083153 DC : DRAFT MAY 2008 BS ISO/IEC 20944-1 - INFORMATION TECHNOLOGY - METADATA REGISTRIES INTEROPERABILITY AND BINDINGS (MDR-IB) - PART 1: FRAMEWORK, COMMON VOCABULARY, AND COMMON PROVISIONS FOR CONFORMANCE
    OIML B 10-2 : 2004 CHECKLISTS FOR ISSUING AUTHORITIES AND TESTING LABORATORIES CARRYING OUT OIML TYPE EVALUATIONS
    17/30359001 DC : 0 BS ISO/IEC GUIDE 63 - GUIDE TO THE DEVELOPMENT AND INCLUSION OF ASPECTS OF SAFETY IN INTERNATIONAL STANDARDS FOR MEDICAL DEVICES
    I.S. EN 592:2002 INSTRUCTIONS FOR USE FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING
    UNE-ISO GUIA 73:2010 IN Risk management. Vocabulary
    UNI CEI 70019 : 2008 CONFORMITY ASSESSMENT - ARRANGEMENTS FOR THE RECOGNITION AND ACCEPTANCE OF CONFORMITY ASSESSMENT RESULTS
    14/30296914 DC : 0 BS ISO/IEC GUIDE 71 - GUIDE FOR ADDRESSING ACCESSIBILITY IN STANDARDS
    13/30286759 DC : 0 BS ISO GUIDE 82 - GUIDE FOR ADDRESSING SUSTAINABILITY IN STANDARDS
    PD ISO/TR 19122:2004 Geographic information/Geomatics. Qualification and certification of personnel
    BS ISO/IEC 20944-1:2013 Information technology. Metadata Registries Interoperability and Bindings (MDR-IB) Framework, common vocabulary, and common provisions for conformance
    INCITS/ISO/IEC 17799 : 2005 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION SECURITY MANAGEMENT
    I.S. EN ISO 21351:2005 SPACE SYSTEMS - FUNCTIONAL AND TECHNICAL SPECIFICATIONS
    PREN 14382 : DRAFT 2016 GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
    17/30355218 DC : 0 BS ISO 16091 - SPACE SYSTEMS - INTEGRATED LOGISTIC SUPPORT
    PD ISO GUIDE 73:2009 Risk management. Vocabulary
    04/30117245 DC : DRAFT JUL 2004 BS ISO 3534-2 - STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS
    OIML D 27 : 2001 INITIAL VERIFICATION OF MEASURING INSTRUMENTS UTILIZING THE MANUFACTURER'S QUALITY MANAGEMENT SYSTEM
    02/711948 DC : DRAFT OCT 2002 SPACE SYSTEMS - FUNCTIONAL AND TECHNICAL SPECIFICATIONS
    16/30314699 DC : 0 BS ISO 37001 - ANTI-BRIBERY MANAGEMENT SYSTEMS
    ANSI INCITS 532 : 2014 INFORMATION TECHNOLOGY - VOCABULARY DESCRIPTION AND MANAGEMENT
    BS 7511:1989 General criteria for certification bodies operating product certification
    13/30240399 DC : 0 ISO/IEC GUIDE 51 - SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    INCITS/ISO/IEC 15944-5 : 2008(R2013) INFORMATION TECHNOLOGY - BUSINESS OPERATIONAL VIEW - PART 5: IDENTIFICATION AND REFERENCING OF REQUIREMENTS OF JURISDICTIONAL DOMAINS AS SOURCES OF EXTERNAL CONSTRAINTS
    BS ISO 15378 : 2006 AMD 17315 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
    PD 0028:2002 Quantitative software management. Software measurement methods. A guide to the use of ISO/IEC and other standards for obtaining and using software measurements for product and process improvement
    BS ISO/IEC 14598-5:1998 Information technology. Software production evaluation Process for evaluators
    CAN/CSA-ISO/IEC 11179-1:16 Information technology - Metadata registries (MDR) - Part 1: Framework (Adopted ISO/IEC 11179-1:2015, third edition, 2015-12-15)
    PD IEC TR 60825-14:2004 Safety of laser products A user\'s guide
    BS ISO/IEC 15944-1:2011 Information technology. Business operational view Operational aspects of Open-edi for implementation
    04/19976241 DC : DRAFT AUG 2004
    BS EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems Principles, requirements and tests
    CSA ISO 26000 : 2016 GUIDANCE ON SOCIAL RESPONSIBILITY
    12/30254896 DC : 0 BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION
    14/30231508 DC : 0 BS ISO 13065 - SUSTAINABILITY CRITERIA FOR BIOENERGY
    CSA Z14161 : 2011 : R2015 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
    PD IEC/TR 62921:2016 Quantification methodology for greenhouse gas emissions for computers and monitors
    03/301880 DC : DRAFT FEB 2003 IEC 62139 ED.1 - GUIDANCE FOR ADDITION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS
    95/206959 DC : 0 IEC 61540 - PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCD'S)
    BS ISO/IEC 19796-1 : 2005 INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH
    98/541066 DC : 0 ISO/IEC GUIDE 51 - SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    14/30262728 DC : 0 BS ISO 9000 - QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
    BS ISO/IEC 19794-1 : 2011 INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 1: FRAMEWORK
    BS ISO/IEC 12119:1994 Information technology. Software packages. Quality requirements and testing
    ANSI/AAMI/ISO 16142-2:2017 MEDICAL DEVICES - RECOGNIZED ESSENTIAL PRINCIPLES OF SAFETY AND PERFORMANCE OF MEDICAL DEVICES - PART 2: GENERAL ESSENTIAL PRINCIPLES AND ADDITIONAL SPECIFIC ESSENTIAL PRINCIPLES FOR ALL IVD MEDICAL DEVICES AND GUIDANCE ON THE SELECTION OF STANDARDS
    CEI EN 60664-1 : 2008 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
    ISO/TR 18786:2014 Health and safety in welding Guidelines for risk assessment of welding fabrication activities
    INCITS/ISO/IEC 24709-1 : 2009 INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR THE BIOMETRIC APPLICATION PROGRAMMING INTERFACE (BIOAPI) - PART 1: METHODS AND PROCEDURES
    DEFSTAN 13-98/5(2010) : 2010 REQUIREMENTS FOR THE PROVISION OF MUNITIONS TECHNICAL DATA FOR THE ASTRID BASE INVENTORY SYSTEM
    CSA ISO/IEC 11179-2 : 2006 : R2016 INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 2: CLASSIFICATION
    13/30282202 DC : 0 BS EN 16622 - HYDRAULIC SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
    CSA ISO/IEC 11179-2 : 2006 INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 2: CLASSIFICATION
    CAN/CSA-ISO/IEC 15944-1:13 (R2017) Information technology - Business operational view - Part 1: Operational aspects of open-edi for implementation (Adopted ISO/IEC 15944-1:2011, second edition, 2011-08-01)
    04/30117386 DC : DRAFT JUL 2004 EN 334 - GAS PRESSURE REGULATORS FOR INLET PRESSURES UP TO 100 BAR
    BS ISO/IEC 14598-6:2001 Information technology. Software production evaluation Documentation of evaluation modules
    BS ISO 15188:2001 Project management guidelines for terminology standardization
    CEN Guide 14:2010 Common policy guidance for addressing standardisation on qualification of professions and personnel
    DEFSTAN 00-00/2(2014) : 2014 A STANDARD FOR DEFENCE STANDARDS: MANAGEMENT AND PRODUCTION
    IEC GUIDE 109:2012 Environmental aspects - Inclusion in electrotechnical product standards
    UNI CEI EN ISO/IEC 19762-1 : 2012 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 1: GENERAL TERMS RELATING TO AIDC
    CEI EN 50069 : 1998 WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    ISO/IEC Guide 7:1994 Guidelines for drafting of standards suitable for use for conformity assessment
    IEC 60068-5-1:1991 Environmental testing - Part 5-1: Guide to drafting of test methods - General principles
    IEC TS 62351-2:2008 Power systems management and associated information exchange - Data and communications security - Part 2: Glossary of terms
    ISO/IEC Guide 21-1:2005 Regional or national adoption of International Standards and other International Deliverables — Part 1: Adoption of International Standards
    I.S. EN 50550:2011 POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
    ISO 15378:2017 Primary packaging materials for medicinal products — Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
    ISO Guide 64:2008 Guide for addressing environmental issues in product standards
    I.S. ISO 26000:2010 GUIDANCE ON SOCIAL RESPONSIBILITY
    ISO 13879:1999 Petroleum and natural gas industries — Content and drafting of a functional specification
    S.R. CEN/TR 16912:2016 GUIDELINES FOR A PROCEDURE TO SUPPORT THE EUROPEAN STANDARDIZATION OF CEMENTS
    TR 102 420 : 1.1.1 TELECOMMUNICATIONS AND INTERNET CONVERGED SERVICES AND PROTOCOLS FOR ADVANCED NETWORKING (TISPAN); REVIEW OF ACTIVITY ON SECURITY
    ANSI Z9.14 : 2014 TESTING AND PERFORMANCE-VERIFICATION METHODOLOGIES FOR VENTILATION SYSTEMS FOR BIOSAFETY LEVEL 3 (BSL-3) AND ANIMAL BIOSAFETY LEVEL 3 (ABSL-3) FACILITIES
    UNE-EN ISO 13606-1:2013 Health informatics - Electronic health record communication - Part 1: Reference model (ISO 13606-1:2008)
    AHAM 7002 : 2014 SUSTAINABILITY STANDARD FOR HOUSEHOLD PORTABLE AND FLOOR CARE APPLIANCES
    CSA ISO/IEC 14143-6:14 (R2019) Information technology - Software measurement - Functional size measurement - Part 6: Guide for use of ISO/IEC 14143 series and related international standards (Adopted ISO/IEC 14143-6:2012, second edition, 2012-11-01)
    CAN/CSA-ISO/IEC 19762:18 Information technology — Automatic identification and data capture (AIDC) techniques — Harmonized vocabulary (Adopted ISO/IEC 19762:2016, first edition, 2016-02-01) | Technologies de l\'information — Technique automatiques d\'identification et de saisie de données (AIDC) — Vocabulaire harmonisé (norme ISO/IEC 19762:2016 adoptée, première édition, 2016-02-01)
    ISO/IEC Guide 25:1990 General requirements for the competence of calibration and testing laboratories
    ISO 16016:2016 Technical product documentation Protection notices for restricting the use of documents and products
    BS ISO 26000:2010 Guidance on social responsibility
    S.R. CEN/TS 15674:2007 AIR QUALITY - MEASUREMENT OF STATIONARY SOURCE EMISSIONS - GUIDELINES FOR THE ELABORATION OF STANDARDISED METHODS
    CISPR 16-2-3:2016 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
    BS ISO 10795:2011 Space systems. Programme management and quality. Vocabulary
    SAE ARP 5400 : 1999 IDENTIFICATION AND IMPLEMENTATION OF GLOBAL STANDARDIZATION OPPORTUNITIES IN THE COMMERCIAL JET TRANSPORT INDUSTRY
    UNI ISO 22310 : 2011 INFORMATION AND DOCUMENTATION - GUIDELINES FOR STANDARDS DRAFTERS FOR STATING RECORDS MANAGEMENT REQUIREMENTS IN STANDARDS
    CSA C22.4 No. 2 : 2009 OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
    DEFSTAN 00-00(PT4)/2(1999) : INTERIM
    BIS IS/ISO 14050 : 2002 ENVIRONMENTAL MANAGEMENT - VOCABULARY
    CEI UNI EN ISO/IEC 17000 : 2011 CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
    ASTM E 1884 : 1997 Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004)
    ISO 14971:2007 Medical devices Application of risk management to medical devices
    ASTM E 1905 : 1997 Guide for General Requirements for Assessment and Accreditation of Certification/Registration Bodies (Withdrawn 2004)
    CEI UNI EN ISO 14971 : 2013 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    I.S. EN 14726:2005 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    DIN EN 197-2:2014-05 CEMENT - PART 2: CONFORMITY EVALUATION
    EN ISO 9000:2015 Quality management systems - Fundamentals and vocabulary (ISO 9000:2015)
    ISO 16020:2005 Steel for the reinforcement and prestressing of concrete Vocabulary
    I.S. EN ISO 14971:2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007, CORRECTED VERSION 2007-10-01)
    DIN EN 13263-2:2009-07 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    DIN EN 15085-1:2013-11 Railway applications - Welding of railway vehicles and components - Part 1: General (includes Amendment A1:2013)
    DIN EN ISO 14971:2013-04 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES (ISO 14971:2007)
    BS EN 13606-1:2007 Health informatics. Electronic health record communication Reference model
    ISO 9000:2015 Quality management systems — Fundamentals and vocabulary
    UNE-EN ISO 15189:2013 Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15)
    BS EN 45011:1998 General requirements for bodies operating product certification systems
    15/30326358 DC : 0 BS EN 60898-3 - ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 3: CIRCUIT-BREAKERS FOR D.C. OPERATION
    DIN EN 197-2:2000-11 CEMENT - PART 2: CONFORMITY EVALUATION
    I.S. EN 13263-1:2005 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
    I.S. EN 15085-1:2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL
    VDI 1000:2017-02 VDI Standardisation Work - Principles and procedures
    BS 7799-1(2005) : 2005 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION SECURITY MANAGEMENT
    BS 0-2:1997 A standard for standards Recommendations for committee procedures
    BS 6068-4.4(2000) : 2000 WATER QUALITY - DETECTION AND ENUMERATION OF INTESTINAL ENTEROCOCCI - PART 2: MEMBRANE FILTRATION METHOD
    BIS IS/IEC 60898-1 : 2002 ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVER CURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR AC OPERATION
    BS 0-1:1997 A standard for standards Guide to the context, aims and general principles
    I.S. EN ISO 8655-1:2002 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
    ONORM EN ISO 8655-6 : 2009 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR
    BS 0-1:2005 A standard for standards Development of standards. Specification
    PD 6532-5:2000 Reference materials. Guide to the contents of certificates of reference materials General requirements for the competence of reference material producers
    EN ISO 15378:2017 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO 15378:2017)
    ISO/IEC 19794-1:2011 Information technology — Biometric data interchange formats — Part 1: Framework
    CSA ISO 14024 : 1999 : R2004 ENVIRONMENTAL LABELS AND DECLARATION - TYPE 1 ENVIRONMENTAL LABELLING - PRINCIPLES AND PROCEDURES
    OIML B 10 : 2011 AMD 2012 FRAMEWORK FOR A MUTUAL ACCEPTANCE ARRANGEMENT ON OIML TYPE EVALUATIONS
    BS 6460-1:1983 Accreditation of testing laboratories. Specification of the general requirements for the technical competence of testing laboratories
    ISO 22320:2011 Societal security Emergency management Requirements for incident response
    I.S. EN 450-2:2005 FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    03/314898 DC : DRAFT SEP 2003 ISO 8655-7 - PISTON-OPERATED VOLUMETRIC APPARATUS - PART 7: NON-GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERRORS
    BS ISO 16142-2:2017 Medical devices. Recognized essential principles of safety and performance of medical devices General essential principles and additional specific essential principles for all IVD medical devices and guidance on the selection of standards
    04/30062174 DC : DRAFT JUN 2004 ISO/IEC FCD 17799 - INFORMATION TECHNOLOGY - CODE OF PRACTICE FOR INFORMATION SECURITY MANAGEMENT
    BS ISO/IEC 29109-1:2009 Information technology. Conformance testing methodology for biometric data interchange formats defined in ISO/IEC 19794 Generalized conformance testing methodology
    DIN ISO/IEC 12119:1995-08 INFORMATION TECHNOLOGY - SOFTWARE PACKAGES - QUALITY REQUIREMENTS AND TESTING
    16/30302061 DC : 0 BS 6349-5 - MARITIME WORKS - PART 5: CODE OF PRACTICE FOR DREDGING AND RECLAMATION
    PD IEC/TR 60601-4-1:2017 Medical electrical equipment Guidance and interpretation. Medical electrical equipment and medical electrical systems employing a degree of autonomy
    13/30264591 DC : 0 BS EN 60747-14-6 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-6: SEMICONDUCTOR SENSORS - HUMIDITY SENSOR
    NF ISO 15188 : 2001 PROJECT MANAGEMENT GUIDELINES FOR TERMINOLOGY STANDARDIZATION
    BS ISO 20400:2017 Sustainable procurement. Guidance
    CEI EN 50090-8 : 2001 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 8: CONFORMITY ASSESSMENT OF PRODUCT
    16/30272856 DC : 0 BS ISO/IEC 40180 - INFORMATION TECHNOLOGY - LEARNING, EDUCATION, AND TRAINING - QUALITY FOR LEARNING, EDUCATION AND TRAINING - FUNDAMENTALS AND REFERENCE FRAMEWORK
    PD IEC/TS 62768:2012 Preparation and processing of source definitions for data element types. Guidelines for product committees
    ANSI INCITS 423.4 : 2009 INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY STANDARD FOR BIOMETRIC DATA INTERCHANGE FORMAT STANDARDS - PART 4: CONFORMANCE TESTING METHODOLOGY FOR INCITS 381: FINGER IMAGE DATA INTERCHANGE FORMAT
    PD CEN/TR 14245:2014 Cement. Guidelines for the application of EN 197-2 Conformity Evaluation
    CEI 109-5 : 2011 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 2-1: APPLICATION GUIDE - EXPLANATION OF THE APPLICATION OF THE IEC 60664 SERIES, DIMENSIONING EXAMPLES AND DIELECTRIC TESTING
    17/30333280 DC : 0 BS ISO 17422 - PLASTICS - ENVIRONMENTAL ASPECTS - GENERAL GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    PD CEN/TR 15472:2006 Postal services. Measurement of transit times for parcels by the use of a track and trace system
    BS EN ISO/IEC 17000:2004 Conformity assessment. Vocabulary and general principles
    BS 6068-4.14(2000) : 2000 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 1: MEMBRANE FILTRATION METHOD
    DIN 820-4 E : 2000 STANDARDIZATION - PART 4: WORKING PROCEDURES
    14/30258987 DC : 0 BS ISO 6935-2 - STEEL FOR THE REINFORCEMENT OF CONCRETE - PART 2: RIBBED BARS
    08/30187038 DC : DRAFT JULY 2008 BS EN 55016-2-3 AMD1 - SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
    NF EN 60068 5-2 : 2000 ENVIRONMENTAL TESTING - PART 5: GUIDE TO DRAFTING OF TEST METHODS - TERMS AND DEFINITIONS
    12/30257341 DC : 0 BS EN ISO 13606-1 - HEALTH INFORMATICS - ELECTRONIC HEALTH RECORD COMMUNICATION - PART 1: REFERENCE MODEL
    03/317065 DC : DRAFT NOV 2003 ISO/IEC 17025 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABS - AMENDMENT 1
    ISO/IEC 14143-2:2011 Information technology — Software measurement — Functional size measurement — Part 2: Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
    BS ISO 9308-2 : 2012 WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 2: MOST PROBABLE NUMBER METHOD
    PD CEN ISO/TS 17427:2014 Intelligent transport systems. Cooperative systems. Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems
    BS ISO/IEC 25051:2014 Software engineering. Systems and software Quality Requirements and Evaluation (SQuaRE). Requirements for quality of Ready to Use Software Product (RUSP) and instructions for testing
    ASTM E 994 : 1995 Standard Guide for Calibration and Testing Laboratory Accreditation Systems General Requirements for Operation and Recognition (Withdrawn 2004)
    17/30316205 DC : 0 BS IEC 62853 ED1.0 - OPEN SYSTEMS DEPENDABILITY
    17/30345251 DC : 0 BS ISO 10144 - STEELS FOR THE REINFORCEMENT AND PRESTRESSING OF CONRETE - CERTIFICATION SCHEME FOR STEEL BARS AND WIRES
    17/30323821 DC : 0 BS ISO 20245 - CROSS-BORDER TRADE OF SECOND-HAND GOODS
    16/30349524 DC : 0 BS EN ISO 17427-1 - INTELLIGENT TRANSPORT SYSTEMS - COOPERATIVE ITS - PART 1: ROLES AND RESPONSIBILITIES IN THE CONTEXT OF CO-OPERATIVE ITS ARCHITECTURE(S)
    CLC/TR 50090-9-2:2007 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION
    ASTM E 1906 : 1999 Standard Guide for General Requirements for Bodies Operating Product Certification Systems (Withdrawn 2004)
    BS 7502:1989 General criteria for the assessment of testing laboratories
    DIN ISO 16016:2017-08 TECHNICAL PRODUCT DOCUMENTATION - PROTECTION NOTICES FOR RESTRICTING THE USE OF DOCUMENTS AND PRODUCTS (ISO 16016:2016)
    I.S. EN ISO 28803:2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS (ISO 28803:2012)
    97/540747 DC : DRAFT FEB 1997 ISO/IEC GUIDE 51 - SAFETY ASPECTS - GUIDELINES FOR THEIR INCLUSION IN STANDARDS
    PD IEC WT 01:2001 IEC system for conformity testing and certification of wind turbines. Rules and procedures
    17/30343024 DC : 0 BS ISO 16266-2 - WATER QUALITY - DETECTION AND ENUMERATION OF PSEUDOMONAS AERUGINOSA - PART 2: MOST PROBABLE NUMBER METHOD
    BS EN 55016-2-3:2017 Specification for radio disturbance and immunity measuring apparatus and methods Methods of measurement of disturbances and immunity. Radiated disturbance measurements
    07/30158392 DC : 0 BS EN 15267-1 - AIR QUALITY - CERTIFICATION OF AUTOMATED MEASURING SYSTEMS - PART 1: GENERAL PRINCIPLES
    14/30284754 DC : 0 BS ISO/IEC 19762 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY
    04/30110831 DC : DRAFT NOV 2004 BS 0 - A STANDARD FOR STANDARDS - PART 1: REQUIREMENTS IN THE DEVELOPMENT OF NATIONAL STANDARDS AND UK POSITIONS ON INTERNATIONAL AND EUROPEAN STANDARDS WORK - SPECIFICATION
    BS ISO/IEC 21827:2008 Information technology. Security techniques. Systems security engineering. Capability maturity model (SSE- CMM)
    S.R. CLC/TR 62125:2008 ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES
    12/30186137 DC : 0 BS ISO/IEC 27002 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - CODE OF PRACTICE FOR INFORMATION SECURITY CONTROLS
    04/30126470 DC : DRAFT DEC 2004 ISO/IEC 24743 - INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - INFORMATION SECURITY MANAGEMENT SYSTEMS REQUIREMENTS SPECIFICATION
    DD CEN/TS 15674:2007 Air quality. Measurement of stationary source emissions. Guidelines for the elaboration of standardised methods
    DIN EN ISO 9308-2:2014-06 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2: Most probable number method (ISO 9308-2:2012)
    BS ISO 22310:2006 Information and documentation. Guidelines for standards drafters for stating records management requirements in standards
    PD CEN ISO/TR 13881:2011 Petroleum and natural gas industries. Classification and conformity assessment of products, processes and services
    BS EN 16341:2012 Selection of standards and standard-like documents for defence products and services. Order of preference
    04/30086456 DC : DRAFT APR 2004 BS ISO 11074 - SOIL QUALITY - VOCABULARY
    13/30281051 DC : 0 BS EN 14680 - ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
    BS 7513:1989 General criteria for certification bodies operating certification of personnel
    S.R. CEN/TR 14245:2014 CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION
    UNI EN ISO 10209 : 2012 TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED DOCUMENTATION
    ISO/IEC 20944-1:2013 Information technology Metadata Registries Interoperability and Bindings (MDR-IB) Part 1: Framework, common vocabulary, and common provisions for conformance
    NF ISO/IEC TR 17010 : 2000 FD EXIGENCES GENERALES RELATIVES AUX ORGANISMES PROCEDANT A L'ACCREDITATION D'ORGANISMES D'INSPECTION
    05/30131803 DC : DRAFT APR 2005 EN 15198 - METHODOLOGY FOR THE IGNITION HAZARD ASSESSMENT OF NON-ELECTRICAL EQUIPMENT AND COMPONENTS FOR INTENDED USE IN POTENTIALLY EXPLOSIVE ATMOSPHERES
    BS 7512:1989 General criteria for certification bodies operating quality system certification
    CSA Z1002 : 2012 : INC : UPD 1 : 2013 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
    UNE-ISO 20400:2017 Sustainable procurement. Guidance
    BS ISO/IEC TR 13233:1995 Information technology. Interpretation of accreditation requirements in ISO/IEC Guide 25. Accreditation of information technology and telecommunications testing laboratories for software and protocol testing services
    CSA C50069 : 1999 : INC : UPD 1 : 1999 : R2012 WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    CSA ISO/IEC 11179-2 : 2006 : R2011 INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 2: CLASSIFICATION
    INCITS/ISO/IEC 20944-5 : 2013 INFORMATION TECHNOLOGY - METADATA REGISTRIES INTEROPERABILITY AND BINDINGS (MDR-IB) - PART 5: PROFILES
    IEC TR 60664-2-1:2011 Insulation coordination for equipment within low-voltage systems - Part 2-1: Application guide - Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
    CSA ISO/IEC 19762-1 :2009 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 1: GENERAL TERMS RELATING TO AIDC
    ISO 10705-3:2003 Water quality Detection and enumeration of bacteriophages Part 3: Validation of methods for concentration of bacteriophages from water
    I.S. EN 16341:2012 SELECTION OF STANDARDS AND STANDARD-LIKE DOCUMENTS FOR DEFENCE PRODUCTS AND SERVICES - ORDER OF PREFERENCE
    ISO 13606-1:2008 Health informatics Electronic health record communication Part 1: Reference model
    EN 14720 : 2005 **DUPLICATE RECORD**
    I.S. EN 60898-1:2003 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002 (MOD))
    ISO/IEC Guide 71:2014 Guide for addressing accessibility in standards
    BS ISO/IEC 11179-1:2015 Information technology. Metadata registries (MDR) Framework
    EN 14726:2005 Aluminium and aluminium alloys - Chemical analysis - Guideline for spark optical emission spectrometric analysis
    I.S. EN 61069-1:2016 INDUSTRIAL-PROCESS MEASUREMENT, CONTROL AND AUTOMATION - EVALUATION OF SYSTEM PROPERTIES FOR THE PURPOSE OF SYSTEM ASSESSMENT - PART 1: TERMINOLOGY AND BASIC CONCEPTS
    IEC TR 60601-4-1:2017 Medical electrical equipment - Part 4-1: Guidance and interpretation - Medical electrical equipment and medical electrical systems employing a degree of autonomy
    S.R. CWA 15992:2009 HARMONIZATION OF DATA INTERCHANGE IN TOURISM
    ISO/TS 22745-2:2009 Industrial automation systems and integration Open technical dictionaries and their application to master data Part 2: Vocabulary
    ISO/IEC 12119:1994 Information technology Software packages Quality requirements and testing
    OIML B 3 : 2011 OIML BASIC CERTIFICATE SYSTEM FOR OIML TYPE EVALUATION OF MEASURING INSTRUMENTS
    ISO/IEC Guide 43-1:1997 Proficiency testing by interlaboratory comparisons Part 1: Development and operation of proficiency testing schemes
    ASTM E 2916 : 2013 Standard Terminology for Digital and Multimedia Evidence Examination
    ASTM E 1458 : 2012 Standard Test Method for Calibration Verification of Laser Diffraction Particle Sizing Instruments Using Photomask Reticles
    UNE-EN 13282-3:2015 Hydraulic road binders - Part 3: Conformity evaluation
    CSA ISO GUIDE 64 : 1998 GUIDE FOR THE INCLUSION OF ENVIRONMENTAL ASPECTS IN PRODUCT STANDARDS
    UNI ISO 3534-2 : 2014 STATISTICS - VOCABULARY AND SYMBOLS - PART 2: APPLIED STATISTICS
    ISO/IEC 21827:2008 Information technology Security techniques Systems Security Engineering Capability Maturity Model (SSE-CMM)
    IEC 61540:1997+AMD1:1998 CSV Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs)
    ISO Guide 73:2009 Risk management — Vocabulary
    ISO 10241-2:2012 Terminological entries in standards — Part 2: Adoption of standardized terminological entries
    ISO/IEC 14143-6:2012 Information technology — Software measurement — Functional size measurement — Part 6: Guide for use of ISO/IEC 14143 series and related International Standards
    ISO/IEC Guide 66:1999 General requirements for bodies operating assessment and certification/registration of environmental management systems (EMS)
    BS EN ISO 14971:2012 Medical devices. Application of risk management to medical devices
    ISO/IEC Guide 73:2002 Risk management Vocabulary Guidelines for use in standards
    ISO/IEC TR 17010:1998 General requirements for bodies providing accreditation of inspection bodies
    IEC 60050-521:2002 International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits
    S.R. CR 14245:2001 GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION'
    ISO/IEC 24709-1:2017 Information technology — Conformance testing for the biometric application programming interface (BioAPI) — Part 1: Methods and procedures
    IEC TR 62139:2004 Guidelines for the addition of environmental aspects in product standards specitif to TC 23
    ISO 5127:2017 Information and documentation Foundation and vocabulary
    DIN EN 13263-1:2009-07 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
    DIN EN 45011:1990-05 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
    DIN EN ISO 15189:2014-11 Medical laboratories - Requirements for quality and competence (ISO 15189:2012, Corrected version 2014-08-15)
    DIN EN 14382:2016-05 (Draft) SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    BS EN 14726:2005 Aluminium and aluminium alloys. Chemical analysis. Guideline for spark optical emission spectrometric analysis
    BS EN ISO 21351:2005 Space systems. Functional and technical specifications
    BS EN 13263-2 : 2005 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    BS EN 197-2:2014 Cement Conformity evaluation
    BS EN 14817:2006 Railway applications. Suspension components. Air-spring control elements
    UNE-EN ISO/IEC 19796-1:2010 Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005)
    ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products Tests for the assessment of surface cleanliness Part 6: Extraction of soluble contaminants for analysis The Bresle method
    ISO/TS 17427:2014 Intelligent transport systems Cooperative systems Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems
    EN ISO 11074:2015 Soil quality - Vocabulary (ISO 11074:2015)
    I.S. EN ISO 14161:2009 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
    OVE/ONORM EN 61400-22 : 2011 WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION (IEC 61400-22:2010)
    EN 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    EN 60898-1:2003/A13:2012 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
    UNE-EN 61400-22:2011 Wind turbines - Part 22: Conformity testing and certification
    I.S. EN ISO 8502-6:2006 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD
    EN ISO 14161:2009 Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009)
    ONORM EN ISO 8502-6 : 2006 PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 6: EXTRACTION OF SOLUBLE CONTAMINANTS FOR ANALYSIS - THE BRESLE METHOD
    I.S. EN ISO 9000:2015 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015)
    DIN EN ISO 16484-2:2004-10 Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004)
    EN 50069:1991/corrigendum Aug. 2007 WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    I.S. EN ISO 8655-6:2002 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR
    EN ISO 16091:2002 Space systems - Integrated logistic support (ISO 16091:2002)
    UNI EN 15085-1 : 2014 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL
    UNI EN 15167-2 : 2006 GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION
    UNI EN ISO 8655-1 : 2004 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
    UNI EN 13263-1 : 2009 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
    EN 50090-8:2000 Home and Building Electronic Systems (HBES) - Part 8: Conformity assessment of products
    PD 3542:1991 The role of standards in company quality management
    UNI EN ISO 8655-6 : 2005 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR
    EN ISO 14020:2001 Environmental labels and declarations - General principles (ISO 14020:2000)
    EN 60898-1:2003/A13:2012 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION (IEC 60898-1:2002, MODIFIED)
    UNI EN ISO 15189 : 2013 MEDICAL LABORATORIES - REQUIREMENTS FOR QUALITY AND COMPETENCE
    UNI EN 13263-2 : 2009 SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION
    UNI EN ISO 14161 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
    UNI EN 14382 : 2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    EN 45011:1998 General requirements for bodies operating product certification systems (ISO/IEC Guide 65:1996)
    UNI CEI EN ISO/IEC 19796-1 : 2010 INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH
    PD 3542:1988 The operation of standards in a company
    BS EN ISO 14024:2001 Environmental labels and declarations. Type I environmental labelling. Principles and procedures
    I.S. EN ISO/IEC 17000:2004 CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
    DIN EN 13282-3:2015-06 HYDRAULIC ROAD BINDERS - PART 3: CONFORMITY EVALUATION
    BIS IS/ISO/IEC GUIDE 43-1 : 1997 PROFICIENCY TESTING BY INTERLABORATORY COMPARISONS - GUIDELINES - PART 1: DEVELOPMENT AND OPERATION OF PROFICIENCY TESTING SCHEME
    DIN EN ISO 28803:2012-06 Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012)
    UNE-EN ISO 14189:2017 Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013)
    AMSP-01 : 2015 NATO MODELLING AND SIMULATION STANDARDS PROFILE
    PD ISO/IEC Guide 67:2004 Conformity asessment. Fundamentals of product certification
    PD CLC/TR 62125:2008 Environmental statement specific to TC 20. Electric cables
    CEI EN 50068 : 1998 WROUGHT STEEL ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    I.S. EN ISO 10209:2012 TECHNICAL PRODUCT DOCUMENTATION - VOCABULARY - TERMS RELATING TO TECHNICAL DRAWINGS, PRODUCT DEFINITION AND RELATED DOCUMENTATION (ISO 10209:2012)
    BS ISO 860:2007 Terminology work. Harmonization of concepts and terms
    BS EN ISO 10209:2012 Technical product documentation. Vocabulary. Terms relating to technical drawings, product definition and related documentation
    BS ISO 14654:1999 Epoxy-coated steel for the reinforcement of concrete
    14/30264494 DC : 0 BS ISO/IEC 11179-1 - INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 1: FRAMEWORK
    UNI CEN/TR 14245 : 2015 CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION
    CSA C22.4 PACKAGE : 2009 CONSISTS OF C22.4 NO. 1-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE AND C22.4 NO. 2-09, OBJECTIVE-BASED INDUSTRIAL ELECTRICAL CODE - SAFETY MANAGEMENT SYSTEM REQUIREMENTS
    BS EN 62309:2004 Dependability of products containing reused parts. Requriements for functionality and tests
    DIN EN ISO 9308-2 E : 2014 WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 2: MOST PROBABLE NUMBER METHOD (ISO 9308-2:2012)
    BS EN ISO 9308-2:2014 Water quality. Enumeration of Escherichia coli and coliform bacteria Most probable number method
    DIN 820-4:2014-06 Standardization - Part 4: Working procedure
    SR 003 382 : 2.1.1 CLOUD STANDARDS COORDINATION PHASE 2; CLOUD COMPUTING STANDARDS AND OPEN SOURCE; OPTIMIZING THE RELATIONSHIP BETWEEN STANDARDS AND OPEN SOURCE IN CLOUD COMPUTING
    PREN 1330-1 : DRAFT 2014 NON-DESTRUCTIVE TESTING - TERMINOLOGY - PART 1: LIST OF GENERAL TERMS
    05/30076333 DC : DRAFT FEB 2005
    UNE-EN 16622:2016 Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
    BS 7755-1.2:1999 Soil quality. Terminology and classification Terms and definitions relating to sampling
    BS ISO 13879:1999 Petroleum and natural gas industries. Content and drafting of functional specifications
    BS EN 62569-1:2017 Generic specification of information on products by properties Principles and methods
    BS 6068-4.10(1999) : 1999 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA IN SURFACE AND WASTE WATER - PART 3: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR THE DETECTION AND ENUMERATION OF E. COLI IN SURFACE AND WASTE WATER
    I.S. EN ISO 14620-1:2002 SPACE SYSTEMS - SAFETY REQUIREMENTS - PART 1: SYSTEM SAFETY
    BS ISO/IEC 15944-7:2009 Information technology. Business operational view eBusiness vocabulary
    I.S. EN 45011:1998 GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS
    UNE-EN 16341:2012 Selection of standards and standard-like documents for defence products and services - Order of preference
    BS ISO 29845:2011 Technical product documentation. Document types
    BS PAS 121(2007) : 2007 SPECIFICATION FOR ACTIVE FIRE CURTAIN BARRIER ASSEMBLIES AND ACTIVE FIRE CURTAIN BARRIER ASSEMBLIES WITH SMOKE RATING
    BS ISO/IEC 18009:1999 Information technology. Programming languages. Ada: conformity assessment of a language processor
    13/30247136 DC : 0 BS EN ISO 11074 - SOIL QUALITY - VOCABULARY
    06/30147782 DC : DRAFT MAR 2006 ISO 860 - TERMINOLOGY WORK - HARMONIZATION OF CONCEPTS AND TERMS
    DIN EN 16341:2012-06 Selection of standards and standard-like documents for defence products and services - Order of preference
    BS 0-1:1981 Guide. A standard for standards General principles of standardization
    BS ISO 5127:2017 Information and documentation. Foundation and vocabulary
    04/30121964 DC : DRAFT SEP 2004 ISO 22310 - INFORMATION AND DOCUMENTATION - REQUIREMENTS FOR RECORDS AND DOCUMENTS MANAGEMENT IN STANDARDS
    UNE-ISO 9308-2:2013 Water quality -- Enumeration of Escherichia coli and coliform bacteria -- Part 2: Most probable number method
    UNE-ISO 26000:2012 Guidance on social responsibility
    CEI CLC/TR 62125 : 2011 ENVIRONMENTAL STATEMENT SPECIFIC TO TC 20 - ELECTRIC CABLES
    94/110814 DC : DRAFT JAN 1995 ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS
    PREN 45001 : DRAFT 1997 GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
    06/30148085 DC : DRAFT JUN 2006 BS 18001 - OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - REQUIREMENTS
    UNI CEN ISO/TS 17427 : 2014 INTELLIGENT TRANSPORT SYSTEMS - COOPERATIVE SYSTEMS - ROLES AND RESPONSIBILITIES IN THE CONTEXT OF COOPERATIVE ITS BASED ON ARCHITECTURE(S) FOR COOPERATIVE SYSTEMS
    BS EN ISO 15378:2017 Primary packaging materials for medicinal products. Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
    ASTM D 6808 : 2002 : R2012 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
    ISO/TR 21089:2004 Health informatics Trusted end-to-end information flows
    UNE-ISO 22310:2010 Information and documentation. Guidelines for standards drafters for stating records management requirements in standards.
    BS 6068-4.13(2000) : 2000 AMD 13447 WATER QUALITY - PART 4: MICROBIOLOGICAL METHODS - SECTION 4.13: DETECTION AND ENUMERATION OF BACTERIOPHAGES - ENUMERATION OF SOMATIC COLIPHAGES
    BS ISO/IEC 15944-5:2008 Information technology. Business operational view Identification and referencing of requirements of jurisdictional domains as sources of external constraints
    BS EN 16622:2015 Silica-calcium fume for concrete. Definitions, requirements and conformity criteria
    BS ISO/IEC 24709-1:2017 Information technology. Conformance testing for the biometric application programming interface (BioAPI) Methods and procedures
    BS ISO/IEC 10641:1993 Information technology. Computer graphics and image processing. Conformance testing of implementations of graphics standards
    BS ISO 16020:2005 Steel for the reinforcement and prestressing of concrete. Vocabulary
    PD ISO/IEC Guide 73:2002 Risk management. Vocabulary. Guidelines for use in standards
    UNI CEI EN ISO 14971 : 2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    BS ISO 16016:2000 Technical product documentation. Protection notices for restricting the use of documents and products
    UNI CEI EN ISO/IEC 17000 : 2005 CONFORMITY ASSESSMENT - VOCABULARY AND GENERAL PRINCIPLES
    UNI EN ISO 9308-2 : 2014 WATER QUALITY - ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 2: MOST PROBABLE NUMBER METHOD
    DD IEC/TS 62351-2:2008 Power systems management and associated information exchange. Data and communications security Glossary of terms
    CSA ISO/IEC 16500-1:2002 INFORMATION TECHNOLOGY - GENERIC DIGITAL AUDIO-VISUAL SYSTEMS - PART 1: SYSTEM REFERENCE MODELS AND SCENARIOS
    BS 7514:1989 General criteria for suppliers\' declaration of conformity
    CSA ISO/IEC 14598-6:2002 SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 6: DOCUMENTATION OF EVALUATION MODULES
    CSA CISPR 16-2-3 : 2012 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
    CSA ISO 9000 : 2016 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
    BS 7315(1990) : 1990 SPECIFICATION FOR WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    07/30146568 DC : 0 BS ISO/IEC 19762-1 - INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 1: GENERAL TERMS RELATING TO AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC)
    INCITS/ISO/IEC 29109-1 : 2010 INFORMATION TECHNOLOGY - CONFORMANCE TESTING METHODOLOGY FOR BIOMETRIC DATA INTERCHANGE RECORDS AS DEFINED IN ISO/IEC 19794 - PART 1: GENERALIZED CONFORMANCE TESTING METHODOLOGY
    CSA C50069 : 1999 : INC : UPD 1 : 1999 : R2012 : FR WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    ISO 22310:2006 Information and documentation — Guidelines for standards drafters for stating records management requirements in standards
    BIS IS/ISO 9000 : 2015 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY
    UNE-EN ISO 15378:2016 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO 15378:2015)
    CSA ISO/IEC 19762-1 : 2009 : R2014 INFORMATION TECHNOLOGY - AUTOMATIC IDENTIFICATION AND DATA CAPTURE (AIDC) TECHNIQUES - HARMONIZED VOCABULARY - PART 1: GENERAL TERMS RELATING TO AIDC
    INCITS/ISO/IEC 11179-2 : 2009 INFORMATION TECHNOLOGY - METADATA REGISTRIES (MDR) - PART 2: CLASSIFICATION
    AAMI ISO 14971 : 2007 : R2010 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    CEN/CLC Guide 6:2014 Guide for addressing accessibility in standards
    OIML B 10-1 : 2004 FRAMEWORK FOR A MUTUAL ACCEPTANCE ARRANGEMENT ON OIML TYPE EVALUATIONS
    AAMI ISO 14161 : 2009 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE, AND INTERPRETATION OF RESULTS
    UNI EN ISO 13606-5 : 2010 HEALTH INFORMATICS - ELECTRONIC HEALTH RECORD COMMUNICATION - PART 5: INTERFACE SPECIFICATION
    I.S. EN ISO 50090-08:2001 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 8: CONFORMITY ASSESSMENT OF PRODUCTS
    BS 6878(1988) : 1988 SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR FOR INDUSTRIAL USE - CAST ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    ISO Guide 82:2014 Guidelines for addressing sustainability in standards
    ANSI/ASSE Z690 PACKAGE : 2011 ANSI/ASSE Z690.1-2011 - VOCABULARY FOR RISK MANAGEMENT; ANSI/ASSE Z690.2-2011 - RISK MANAGEMENT - PRINCIPLES AND GUIDELINES; ANSI/ASSE Z690.3-2011 - RISK ASSESSMENT TECHNIQUES; ISO/ANSI/ASSE/TR-31004-2014 (Z690 TR-2014) RISK MANAGEMENT-GUIDANCE FOR THE IMPLEMENTATION OF ISO 31004
    ISO/IEC Guide 68:2002 Arrangements for the recognition and acceptance of conformity assessment results
    IWA 13:2014 Multiple resource evaluation guideline
    ISO/IEC 11179-2:2005 Information technology Metadata registries (MDR) Part 2: Classification
    ANSI/ASSE Z690.1 : 2011 VOCABULARY FOR RISK MANAGEMENT
    ISO/IEC 17799:2005 Information technology Security techniques Code of practice for information security management
    ISO 13606-5:2010 Health informatics Electronic health record communication Part 5: Interface specification
    ISO/TR 12309:2009 Health informatics Guidelines for terminology development organizations
    I.S. EN 50068:1991 WROUGHT STEEL ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    I.S. EN 16622:2015 SILICA-CALCIUM FUME FOR CONCRETE - DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
    ISO/TR 14639-2:2014 Health informatics Capacity-based eHealth architecture roadmap Part 2: Architectural components and maturity model
    SWIFT 31000:2010 NATIONAL GUIDANCE ON IMPLEMENTING I.S. ISO 31000:2009 RISK MANAGEMENT - PRINCIPLES AND GUIDELINES
    I.S. EN 50069:1991 WELDED COMPOSITE ENCLOSURES OF CAST AND WROUGHT ALUMINIUM ALLOYS FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    16/30334290 DC : 0 BS EN 14382 - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURE UP TO 100 BAR
    BS EN ISO 13606-5:2010 Health informatics. Electronic health record communication Interface specification
    IEC TR 62125:2007 Environmental statement specific to IEC TC 20 - Electric cables
    PREN 197-2 : DRAFT 2012 CEMENT - PART 2: CONFORMITY EVALUATION
    CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2
    EN 50550:2011/A1:2014 POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
    NFC 61 460 : 2002 AMD 2 2011 ELECTRICAL ACCESSORIES - PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCDS)
    ASTM D 6808 : 2002 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
    EN 62569-1:2017 Generic specification of information on products by properties - Part 1: Principles and method
    ISO 17422:2002 Plastics Environmental aspects General guidelines for their inclusion in standards
    ISO/TR 12773-1:2009 Business requirements for health summary records Part 1: Requirements
    ISO/IEC 40180:2017 Information technology — Quality for learning, education and training — Fundamentals and reference framework
    ISO/TR 13881:2000 Petroleum and natural gas industries Classification and conformity assessment of products, processes and services
    ISO/IEC 11404:2007 Information technology — General-Purpose Datatypes (GPD)
    I.S. EN ISO 15378:2017 PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2015, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP) (ISO 15378:2017)
    I.S. EN 62020:1999 ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
    I.S. EN 60664-1:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
    ISO/IEC Guide 67:2004 Conformity assessment Fundamentals of product certification
    IEC TR 62921:2016 Quantification methodology for greenhouse gas emissions for computers and monitors
    I.S. EN 14720-1:2005 HEALTH INFORMATICS - SERVICE REQUEST AND REPORT MESSAGES - PART 1: BASIC SERVICES INCLUDING REFERRAL AND DISCHARGE
    DIN EN ISO 9000:2015-11 QUALITY MANAGEMENT SYSTEMS - FUNDAMENTALS AND VOCABULARY (ISO 9000:2015)
    DIN EN 14817 E : 2006 RAILWAY APPLICATIONS - SUSPENSION COMPONENTS - AIR SPRING CONTROL ELEMENTS
    DIN EN ISO 14161:2010-03 STERILIZATION OF HEALTH CARE PRODUCTS - BIOLOGICAL INDICATORS - GUIDANCE FOR THE SELECTION, USE AND INTERPRETATION OF RESULTS
    DIN EN ISO 16484-2:2016-08 (Draft) BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: HARDWARE
    BS EN 14175-1:2003 Fume cupboards Vocabulary
    ISO/IEC Guide 65:1996 General requirements for bodies operating product certification systems
    BS EN 14137:2003 Postal services. Quality of service. Measurement of loss of registered mail and other types of postal service using a track and trace system
    BS EN 13263-1 : 2005 SILICA FUME FOR CONCRETE - PART 1: DEFINITIONS, REQUIREMENTS AND CONFORMITY CRITERIA
    ISO 10705-2:2000 Water quality Detection and enumeration of bacteriophages Part 2: Enumeration of somatic coliphages
    BS EN ISO 10705-2:2001 Water quality. Detection and enumeration of bacteriophages Enumeration of somatic coliphages
    ISO 10209:2012 Technical product documentation — Vocabulary — Terms relating to technical drawings, product definition and related documentation
    ISO 26000:2010 Guidance on social responsibility
    ISO 14620-1:2002 Space systems Safety requirements Part 1: System safety
    BS EN ISO 7899-2:2000 Water quality. Detection and enumeration of intestinal enterococci in surface and waste water Membrane filtration method
    UNI EN 197-2 : 2014 CEMENT - PART 2: CONFORMITY EVALUATION
    ISO 28803:2012 Ergonomics of the physical environment — Application of International Standards to people with special requirements
    EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The Bresle method (ISO 8502-6:2006)
    BS EN ISO 8655-1:2002 Piston-operated volumetric apparatus Terminology, general requirements and user recommendations
    BS EN 14175-2:2003 Fume cupboards Safety and performance requirements
    EN 61400-22:2011 Wind turbines - Part 22: Conformity testing and certification
    ISO/IEC Guide 61:1996 General requirements for assessment and accreditation of certification/registration bodies
    BS EN 45010:1998 General requirements for assessment and accreditation of certification systems
    I.S. EN 197-2:2014 CEMENT - PART 2: CONFORMITY EVALUATION
    CEN/TR 14245:2014 Cement - Guidelines for the application of EN 197-2 Conformity Evaluation
    ISO 8655-1:2002 Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations
    IEC 62309:2004 Dependability of products containing reused parts - Requirements for functionality and tests
    IEC 61069-1:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
    ISO 9308-2:2012 Water quality — Enumeration of Escherichia coli and coliform bacteria — Part 2: Most probable number method
    ISO 15189:2012 Medical laboratories — Requirements for quality and competence
    BS EN ISO 7899-1:1999 Water quality. Detection and enumeration of intestinal enterococci in surface and waste water Miniaturized method (Most probable number) for surface and waste water
    ISO 16484-2:2004 Building automation and control systems (BACS) — Part 2: Hardware
    ISO 21351:2005 Space systems Functional and technical specifications
    UNE-EN 50550:2012 Power frequency overvoltage protective device for household and similar applications (POP)
    BS EN ISO 14020:2001 Environmental labels and declarations. General principles
    ISO 14189:2013 Water quality — Enumeration of Clostridium perfringens — Method using membrane filtration
    BS EN 45012:1998 General requirements for bodies operating assessment and certification/registration of quality systems
    BS EN 60898-1 : 2003 ELECTRICAL ACCESSORIES - CIRCUIT BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    BS EN ISO 9308-3:1999 Water quality. Detection and enumeration of Escherichia Coli and coliform bacteria in surface and waste water Miniaturized method (most probable number) for the detection and enumeration of $7IE. coli$7R in surface and waste water
    ISO 14020:2000 Environmental labels and declarations — General principles
    BS EN ISO 15189:2012 Medical laboratories. Requirements for quality and competence
    ISO/IEC 19796-1:2005 Information technology Learning, education and training Quality management, assurance and metrics Part 1: General approach
    ISO 7899-2:2000 Water quality Detection and enumeration of intestinal enterococci Part 2: Membrane filtration method
    EN 14817:2006 Railway applications - Suspension components - Air spring control elements
    EN ISO/IEC 19762-1:2012 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 1: General terms relating to AIDC (ISO/IEC 19762-1:2008)
    EN 13725:2003/AC:2006 AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY
    EN 450-2:2005 Fly ash for concrete - Part 2: Conformity evaluation
    EN ISO 13606-5:2010 Health informatics - Electronic health record communication - Part 5: Interface specification (ISO 13606-5:2010)
    EN ISO 7899-2 : 2000 WATER QUALITY - DETECTION AND ENUMERATION OF INTESTINAL ENTEROCOCCI - PART 2: MEMBRANE FILTRATION METHOD
    EN ISO 13606-1:2012 Health informatics - Electronic health record communication - Part 1: Reference model (ISO 13606-1:2008)
    EN 14175-1:2003 Fume cupboards - Part 1: Vocabulary
    EN ISO 9308-2:2014 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2: Most probable number method (ISO 9308-2:2012)
    EN ISO 9308-3:1998/AC:2000 WATER QUALITY - DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA - PART 3: MINIATURIZED METHOD (MOST PROBABLE NUMBER) BY INOCULATION IN LIQUID MEDIUM
    EN 14137:2003 POSTAL SERVICES - QUALITY OF SERVICE - MEASUREMENT OF LOSS OF REGISTERED MAIL AND OTHER TYPES OF POSTAL SERVICE USING A TRACK AND TRACE SYSTEM
    EN 16341:2012 Selection of standards and standard-like documents for defence products and services - Order of preference
    EN 16622:2015 Silica-calcium fume for concrete - Definitions, requirements and conformity criteria
    EN ISO 8655-6:2002/AC:2009 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 6: GRAVIMETRIC METHODS FOR THE DETERMINATION OF MEASUREMENT ERROR (ISO 8655-6:2002/Cor 1:2008)
    EN 15085-1:2007+A1:2013 Railway applications - Welding of railway vehicles and components - Part 1: General
    EN 14175-2:2003 Fume cupboards - Part 2: Safety and performance requirements
    EN ISO 28803:2012 Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO 28803:2012)
    EN ISO 10209:2012 Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related documentation (ISO 10209:2012)
    EN 592 : 2002 INSTRUCTIONS FOR USE FOR IN VITRO DIAGNOSTIC INSTRUMENTS FOR SELF-TESTING
    EN 14382:2005+A1:2009/AC:2009 SAFETY DEVICES FOR GAS PRESSURE REGULATING STATIONS AND INSTALLATIONS - GAS SAFETY SHUT-OFF DEVICES FOR INLET PRESSURES UP TO 100 BAR
    EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation
    EN ISO 7899-1:1998/AC:2000 WATER QUALITY - DETECTION AND ENUMERATION OF INTESTINAL ENTEROCOCCI - PART 1: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR SURFACE AND WASTE WATER
    EN 13701:2001 Space systems - Glossary of terms
    EN 13606-1:2007 Health informatics - Electronic health record communication - Part 1: Reference model
    EN ISO 14620-1:2002 Space systems - Safety requirements - Part 1: System safety (ISO 14620-1:2002)
    EN 14720-1 : 2005 HEALTH INFORMATICS - SERVICE REQUEST AND REPORT MESSAGES - PART 1: BASIC SERVICES INCLUDING REFERRAL AND DISCHARGE
    EN ISO 16484-2:2004 Building automation and control systems (BACS) - Part 2: Hardware (ISO 16484-2:2004)
    EN 13913:2003 Railway applications - Rubber suspension components - Elastomer-based mechanical parts
    EN ISO 10705-2:2001 Water quality - Detection and enumeration of bacteriophages - Part 2: Enumeration of somatic coliphages (ISO 10705-2:2000)
    EN ISO 21351:2005 Space systems - Functional and technical specifications (ISO 21351:2005)
    EN ISO 8655-1:2002/AC:2009 PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS
    I.S. EN 13725:2003 AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY
    EN ISO/IEC 19796-1:2009 Information technology - Learning, education and training - Quality management, assurance and metrics - Part 1: General approach (ISO/IEC 19796-1:2005)
    EN ISO 14189:2016 Water quality - Enumeration of Clostridium perfringens - Method using membrane filtration (ISO 14189:2013)
    DIN 820-120:2012-09 STANDARDIZATION - PART 120: GUIDELINES FOR THE INCLUSION OF SAFETY ASPECTS IN STANDARDS (ISO/IEC GUIDE 51:1999)
    PREN 14680 : DRAFT 2013 ADHESIVES FOR NON-PRESSURE THERMOPLASTIC PIPING SYSTEMS - SPECIFICATIONS
    BS ISO/IEC 14143-2:2011 Information technology. Software measurement. Functional size measurement Conformity evaluation of software size measurement methods to ISO/IEC 14143-1
    DIN EN ISO/IEC 19762-1:2012-06 Information technology - Automatic identification and data capture (AIDC) techniques - Harmonized vocabulary - Part 1: General terms relating to AIDC (ISO/IEC 19762-1:2008)
    BS EN 13282-3:2013 Hydraulic road binders Conformity evaluation
    07/30151563 DC : 0 BS ISO 7714 - AGRICULTURAL IRRIGATION EQUIPMENT - VOLUMETRIC VALVES - GENERAL REQUIREMENTS AND TEST METHODS
    BS EN ISO 13606-1:2012 Health informatics. Electronic health record communication Reference model
    ISO 6935-2:2015 Steel for the reinforcement of concrete Part 2: Ribbed bars
    BS EN 60068-5-2:2000 Environmental testing. Guide to drafting of test methods Terms and definitions
    01/714317 DC : DRAFT OCT 2001 ISO 18436-2 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - ACCREDITATION OF ORGANIZATIONS AND TRAINING AND CERTIFICATION OF PERSONNEL - PART 2: VIBRATION ANALYSIS
    DIN ISO 26000:2011-01 Guidance on social responsibility (ISO 26000:2010)
    ISO/IEC 15944-5:2008 Information technology Business operational view Part 5: Identification and referencing of requirements of jurisdictional domains as sources of external constraints
    NF EN 61400-22:2011 WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
    05/30127468 DC : DRAFT JAN 2005 ISO/IEC 14143-6 - INFORMATION TECHNOLOGY - SOFTWARE MEASUREMENT - FUNCTIONAL SIZE MEASUREMENT - PART 6: GUIDE FOR USE OF ISO/IEC 14143 SERIES AND RELATED INTERNATIONAL STANDARDS
    07/30164953 DC : 0 IEC 60747-14-5 - SEMICONDUCTOR DEVICES - DISCRETE DEVICES - PART 14-5: SEMICONDUCTOR SENSORS - PN-JUNCTION SEMICONDUCTOR TEMPERATURE SENSOR
    PD IEC/TR 60664-2-1:2011 Insulation coordination for equipment within low-voltage systems Application guide. Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing
    I.S. EN 62309:2004 DEPENDABILITY OF PRODUCTS CONTAINING REUSED PARTS - REQUIREMENTS FOR FUNCTIONALITY AND TESTS
    I.S. EN 45012:1998 GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
    ISO 860:2007 Terminology work Harmonization of concepts and terms
    PD CEN/TR 16912:2016 Guidelines for a procedure to support the European standardization of cements
    PD ISO/TR 12309:2009 Health informatics. Guidelines for terminology development organizations
    BS EN ISO/IEC 19796-1:2009 Information technology. Learning, education and training. Quality management, assurance and metrics General approach
    SAE AS 7003 : 2017 NADCAP PROGRAM REQUIREMENTS
    UNE-ISO 3534-2:2013 Statistics -- Vocabulary and symbols -- Part 2: Applied statistics
    BS 2011-5.1:1991 Environmental testing. Guide to drafting of test methods General principles
    16/30276974 DC : 0 BS ISO/IEC 24709-1 - INFORMATION TECHNOLOGY - CONFORMANCE TESTING FOR BIOAPI - PART 1: METHODS AND PROCEDURES
    BS ISO 13009:2015 Tourism and related services. Requirements and recommendations for beach operation
    12/30250776 DC : 0 BS ISO/IEC 14143-6 - INFORMATION TECHNOLOGY - SOFTWARE MEASUREMENT - FUNCTIONAL SIZE MEASUREMENT - PART 6: GUIDE FOR USE OF ISO/IEC 14143 SERIES AND RELATED INTERNATIONAL STANDARDS
    14/30287226 DC : 0 BS EN ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2008, WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
    EN 62020:1998/A1:2005 ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
    S.R. CEN ISO/TR 13881:2011 PETROLEUM AND NATURAL GAS INDUSTRIES - CLASSIFICATION AND CONFORMITY ASSESSMENT OF PRODUCTS, PROCESSES AND SERVICES
    13/30264596 DC : 0 BS EN 60747-14-7 ED 1.0 - SEMICONDUCTOR DEVICES - PART 14-7: SEMICONDUCTOR SENSORS - FLOW METER
    ISO 10795:2011 Space systems Programme management and quality Vocabulary
    ISO/IEC 15944-1:2011 Information technology Business operational view Part 1: Operational aspects of open-edi for implementation
    INCITS/ISO/IEC 19796-1 : 2008 INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH
    ISO/TS 20245:2014 Cross-border trade of second-hand goods
    I.S. EN 62569-1:2017 GENERIC SPECIFICATION OF INFORMATION ON PRODUCTS BY PROPERTIES - PART 1: PRINCIPLES AND METHOD
    CEI 76-11 : 2011 SAFETY OF LASER PRODUCTS - PART 14: A USER'S GUIDE
    CEI EN 50187 : 1998 GAS-FILLED COMPARTMENTS FOR A.C. SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
    16/30344980 DC : 0 BS ISO 20400 - SUSTAINABLE PROCUREMENT - GUIDANCE
    BS OHSAS 18001(1999) : 1999 AMD 14223 OCCUPATIONAL HEALTH AND SAFETY MANAGEMENT SYSTEMS - SPECIFICATION
    BS EN ISO 11074:2015 Soil quality. Vocabulary
    07/30156704 DC : DRAFT DEC 2007 BS ISO GUIDE 64 - GUIDE FOR ADDRESSING ENVIRONMENTAL ISSUES IN PRODUCT STANDARDS
    AAP-3 : 2015 PRODUCTION, MAINTENANCE AND MANAGEMENT OF NATO STANDARDIZATION DOCUMENTS
    PD CEN/TR 15840:2009 Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2
    INCITS/ISO/IEC 15944-1 : 2008(R2013) INFORMATION TECHNOLOGY - BUSINESS AGREEMENT SEMANTIC DESCRIPTIVE TECHNIQUES - PART 1: BUSINESS OPERATIONAL ASPECTS OF OPEN-EDI FOR IMPLEMENTATION
    15/30322473 DC : DRAFT MAY 2015 BS EN 62569-1 - GENERIC SPECIFICATION OF INFORMATION ON PRODUCTS - PART 1: PRINCIPLES AND METHODS
    S.R. CEN GUIDE 14:2010 COMMON POLICY GUIDANCE FOR ADDRESSING STANDARDIZATION ON QUALIFICATION OF PROFESSIONS AND PERSONNEL
    BS EN ISO/IEC 19762-1:2012 Information technology. Automatic identification and data capture (AIDC) techniques. Harmonized vocabulary General terms relating to AIDC
    CISPR 16-2-3 REDLINE : 4ED 2016 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
    BS ISO/IEC 14143-6:2012 Information technology. Software measurement. Functional size measurement Guide for use of ISO/IEC 14143 series and related International Standards
    PD ISO/TR 14639-2:2014 Health informatics. Capacity-based eHealth architecture roadmap Architectural components and maturity model
    ISO/TR 19122:2004 Geographic information / Geomatics Qualification and certification of personnel
    08/30107200 DC : DRAFT SEP 2008 BS ISO 10241-1 - TERMINOLOGICAL ENTRIES IN STANDARDS - PART 1: GENERAL REQUIREMENTS AND EXAMPLES OF PRESENTATION
    09/30141999 DC : 0 ISO/IEC 24706 - INFORMATION TECHNOLOGY - METADATA FOR TECHNICAL STANDARDS AND SPECIFICATION DOCUMENTS
    11/30253346 DC : 0 BS ISO/IEC 19794-1:2011 - INFORMATION TECHNOLOGY - BIOMETRIC DATA INTERCHANGE FORMATS - PART 1: FRAMEWORK
    PD ISO/IEC GUIDE 51:2014 Safety aspects. Guidelines for their inclusion in standards
    PD ISO/TR 12773-1:2009 Business requirements for health summary records Requirements
    UNE-EN 15085-1:2008 Railway applications - Welding of railway vehicles and components - Part 1: General
    BS EN 62020:1999 Electrical accessories. Residual current monitors for household and similar uses (RCMs)
    ISO 15188:2001 Project management guidelines for terminology standardization
    02/400459 DC : DRAFT MAY 2002 BS ISO/IEC 17030 - THIRD-PARTY MARKS OF CONFORMITY AND THEIR USE
    BIP 2221 : 2013 IMPLEMENTING AND IMPROVING AN ENERGY MANAGEMENT SYSTEM: HOW TO MEET THE REQUIREMENTS OF ISO 50001
    BS ISO 37001:2016 Anti-bribery management systems. Requirements with guidance for use
    BS ISO 13880:1999 Petroleum and natural gas industries. Content and drafting of a technical specification
    BS ISO 14189 : 2013 WATER QUALITY - ENUMERATION OF CLOSTRIDIUM PERFRINGENS - METHOD USING MEMBRANE FILTRATION
    04/30079743 DC : DRAFT APR 2004 ISO 15378 - PRIMARY PACKAGING MATERIALS FOR MEDICINAL PRODUCTS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 WITH REFERENCE TO GOOD MANUFACTURING PRACTICE (GMP)
    08/30183284 DC : DRAFT JUNE 2008 BS ISO 10241-2 - TERMINOLOGICAL ENTRIES IN STANDARDS - PART 2: INTRODUCTION OF INTERNATIONAL TERMINOLOGY STANDARDS INTO DIFFERENT ENVIRONMENTS
    DEFSTAN 61-5(PT6)/6(2009) : 2009 NOMINAL 12 V AND 24 V DC ELECTRICAL SYSTEMS IN MILITARY PLATFORMS
    INCITS/ISO TS 19159-1 : 2015 GEOGRAPHIC INFORMATION - CALIBRATION AND VALIDATION OF REMOTE SENSING IMAGERY SENSORS AND DATA - PART 1: OPTICAL SENSORS
    BS ISO 10705-3:2003 Water quality. Detection and enumeration of bacteriophages Validation of methods for concentration of bacteriophages from water
    CSA ISO/IEC 14598-4 :2002 SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 4: PROCESS FOR ACQUIRERS
    BS ISO 21927-1:2008 Smoke and heat control systems Specification for smoke barriers
    CSA ISO/IEC 21827 : 2009 : R2014 INFORMATION TECHNOLOGY - SECURITY TECHNIQUES - SYSTEMS SECURITY ENGINEERING - CAPABILITY MATURITY MODEL (SSE-CMM)
    CSA Z1002 : 2012 OCCUPATIONAL HEALTH AND SAFETY - HAZARD IDENTIFICATION AND ELIMINATION AND RISK ASSESSMENT AND CONTROL
    97/402277 DC : DRAFT APR 1997 PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES
    INCITS/ISO/IEC 11404 : 2009 INFORMATION TECHNOLOGY - GENERAL-PURPOSE DATATYPES (GPD)
    I.S. EN ISO 13606-5:2010 HEALTH INFORMATICS - ELECTRONIC HEALTH RECORD COMMUNICATION - PART 5: INTERFACE SPECIFICATION
    CSA CISPR 16-2-3 : 2012 : R2017 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 2-3: METHODS OF MEASUREMENT OF DISTURBANCES AND IMMUNITY - RADIATED DISTURBANCE MEASUREMENTS
    CSA ISO/IEC 15944-1:2013 INFORMATION TECHNOLOGY - BUSINESS OPERATIONAL VIEW - PART 1: OPERATIONAL ASPECTS OF OPEN-EDI FOR IMPLEMENTATION
    UNE-EN ISO 9308-2:2014 Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2: Most probable number method (ISO 9308-2:2012)
    CAN/CSA-ISO/IEC 14598-6:2002(R2016) SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 6: DOCUMENTATION OF EVALUATION MODULES
    CSA ISO/IEC 14598-6 : 2002 : R2011 SOFTWARE ENGINEERING - PRODUCT EVALUATION - PART 6: DOCUMENTATION OF EVALUATION MODULES
    CSA ISO 14971 : 2007 : R2017 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    INCITS/ISO/IEC 10641 : 1993 INFORMATION TECHNOLOGY - COMPUTER GRAPHICS AND IMAGE PROCESSING - CONFORMANCE TESTING OF IMPLEMENTATIONS OF GRAPHIC STANDARDS
    CSA ISO 14971 : 2007 : R2012 MEDICAL DEVICES - APPLICATION OF RISK MANAGEMENT TO MEDICAL DEVICES
    IEC 62569-1:2017 Generic specification of information on products by properties - Part 1: Principles and methods
    ISO/IEC 14598-4:1999 Software engineering Product evaluation Part 4: Process for acquirers
    ISO/IEC Guide 39:1988 General requirements for the acceptance of inspection bodies
    CEI EN 62309 : 2005 DEPENDABILITY OF PRODUCTS CONTAINING REUSED PARTS - REQUIREMENTS FOR FUNCTIONALITY AND TESTS
    I.S. ISO GUIDE 73:2009 RISK MANAGEMENT - VOCABULARY
    I.S. EN 50064:1991 WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    IEEE/ANSI C63.14-2014 REDLINE American National Standard Dictionary of Electromagnetic Compatibility (EMC) including Electromagnetic Environmental Effects (E3)
    I.S. TR 50090-9-2:2007 HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-2: INSTALLATION REQUIREMENTS - INSPECTION AND TESTING OF HBES INSTALLATION
    ISO/IEC 20944-5:2013 Information technology Metadata Registries Interoperability and Bindings (MDR-IB) Part 5: Profiles
    ISO 37001:2016 Anti-bribery management systems — Requirements with guidance for use
    UNE-ISO 13009:2016 Tourism and related services. Requirements and recommendations for beach operation
    ISO 20400:2017 Sustainable procurement — Guidance
    UNI EN ISO 28803 : 2012 ERGONOMICS OF THE PHYSICAL ENVIRONMENT - APPLICATION OF INTERNATIONAL STANDARDS TO PEOPLE WITH SPECIAL REQUIREMENTS
    UNI ISO 26000 : 2010 GUIDANCE ON SOCIAL RESPONSIBILITY
    CSA ISO/IEC 12119 : 0 INFORMATION TECHNOLOGY - SOFTWARE PACKAGES - QUALITY REQUIREMENTS AND TESTING
    DEFSTAN 00-00(PT2)/2(1999) : 1999 STANDARDS FOR DEFENCE - PRESENTATION AND MANAGEMENT OF DEFENCE STANDARDS
    ASTM E 1187 : 1997 Standard Terminology Relating to Conformity Assessment (Withdrawn 2006)
    CEI 23-78 : 2004 ELECTRICAL ACCESSORIES PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCDS)
    ASTM D 6808 : 2002 : R2007 Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis
    ISO/IEC 15944-7:2009 Information technology Business operational view Part 7: eBusiness vocabulary
    DIN EN 14726 E : 2005 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    ISO 22745-2:2010 Industrial automation systems and integration Open technical dictionaries and their application to master data Part 2: Vocabulary
    VDE 0670-803 : 1991 AMD 1 COR 1 A.C. SWITCHGEAR AND CONTROLGEAR FOR VOLTAGES ABOVE 1 KV; WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    EN ISO/IEC 17000:2004 Conformity assessment - Vocabulary and general principles (ISO/IEC 17000:2004)
    ISO 13009:2015 Tourism and related services Requirements and recommendations for beach operation
    I.S. EN ISO/IEC 19796-1:2009 INFORMATION TECHNOLOGY - LEARNING, EDUCATION AND TRAINING - QUALITY MANAGEMENT, ASSURANCE AND METRICS - PART 1: GENERAL APPROACH
    EN ISO 14971:2012 Medical devices - Application of risk management to medical devices (ISO 14971:2007, Corrected version 2007-10-01)
    ISO 10241-1:2011 Terminological entries in standards — Part 1: General requirements and examples of presentation
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    IEC TR 60825-14:2004 Safety of laser products - Part 14: A user's guide
    I.S. EN 61400-22:2011 WIND TURBINES - PART 22: CONFORMITY TESTING AND CERTIFICATION
    I.S. HD 639:2002 ELECTRICAL ACCESSORIES - PORTABLE RESIDUAL CURRENT DEVICES WITHOUT INTEGRAL OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR USE (PRCDS)
    IEC WT 01:2001 IEC System for Conformity Testing and Certification of Wind Turbines - Rules and procedures
    ISO 3534-2:2006 Statistics Vocabulary and symbols Part 2: Applied statistics
    IEC 60068-5-2:1990 Environmental testing - Part 5-2: Guide to drafting of test methods - Terms and definitions
    ISO 11074:2015 Soil quality — Vocabulary
    BS EN 592:2002 Instructions for use for in vitro diagnostic instruments for self-testing
    BS EN 13701:2001 Space systems. Glossary of terms
    BS EN ISO 8502-6:2006 Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness Extraction of soluble contaminants for analysis. The Bresle method
    ISO/IEC 19762-1:2008 Information technology Automatic identification and data capture (AIDC) techniques Harmonized vocabulary Part 1: General terms relating to AIDC
    BS EN 50550 : 2011 POWER FREQUENCY OVERVOLTAGE PROTECTIVE DEVICE FOR HOUSEHOLD AND SIMILAR APPLICATIONS (POP)
    BS EN ISO 9000:2015 Quality management systems. Fundamentals and vocabulary
    BS EN 15167-2:2006 Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation
    ISO 14161:2009 Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results
    IEC 61400-22:2010 Wind turbines - Part 22: Conformity testing and certification
    ISO 16091:2002 Space systems Integrated logistic support
    IEC 62020:1998+AMD1:2003 CSV Electrical accessories - Residual current monitors for household and similar uses (RCMs)
    BS EN 15085-1 : 2007 RAILWAY APPLICATIONS - WELDING OF RAILWAY VEHICLES AND COMPONENTS - PART 1: GENERAL
    BS EN ISO 16484-2:2004 Building automation and control systems (BACS) Hardware
    BS EN ISO 14620-1:2002 Space systems. Safety requirements System safety
    BS EN ISO 8655-6:2002 Piston-operated volumetric apparatus Gravimetric methods for the determination of measurement error
    ISO 8655-6:2002 Piston-operated volumetric apparatus Part 6: Gravimetric methods for the determination of measurement error
    CR 14245:2001 Guidelines for the application of EN 197-2 "Conformity Evaluation"
    DIN EN 14817:2006-08 Railway applications - Suspension components - Air spring control elements
    CEN ISO/TS 17427:2014 Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014)
    EN 61069-1:2016 Industrial-process measurement, control and automation - Evaluation of system properties for the purpose of system assessment - Part 1: Terminology and basic concepts
    CISPR 16-2-3:2016 RLV Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements
    OVE/ONORM EN 62020 : AMD 1 2006 ELECTRICAL ACCESSORIES - RESIDUAL CURRENT MONITORS FOR HOUSEHOLD AND SIMILAR USES (RCMS)
    CLC/TR 62125:2008 Environmental statement specific to TC 20 - Electric cables
    DIN EN 14726:2005-12 ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS
    EN 50068 : 1991 COR 2007 WROUGHT STEEL ENCLOSURES FOR GAS FILLED HIGH VOLTAGE SWITCHGEAR AND CONTROLGEAR
    EN 60068-5-2:1999 Environmental testing - Part 5: Guide to drafting of test methods - Terms and definitions
    DIN EN 450-2:2005-05 Fly ash for concrete - Part 2: Conformity evaluation
    DIN 820-4:2000-01 STANDARDIZATION - PART 4: WORKING PROCEDURES
    EN 45010 : 1998 GENERAL REQUIREMENTS FOR ASSESSMENT AND ACCREDITATION OF CERTIFICATION/REGISTRATION BODIES
    EN 50064 : 1989 COR 2007 WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    EN 13282-3:2015 Hydraulic road binders - Part 3: Conformity evaluation
    DIN EN 45012:1990-05 GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS
    DIN EN ISO 14020:2002-02 Environmental labels and declarations - General principles (ISO 14020:2000); English version of DIN EN ISO 14020
    UNE-EN 55016-2-3:2017 Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17000:2004 Conformity assessment Vocabulary and general principles
    AS ISO 37001:2019 Anti-bribery management systems - Requirements with guidance for use
    AS 4276.21:2019 Water microbiology Examination for coliforms and Escherichia coli - Determination of most probable number (MPN) using enzyme hydrolysable substrates (ISO 9308-2:2012, MOD)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective