|
MIL-DTL-24777 Revision A:1998
|
NON-METALLIC MATERIALS WITH SPECIAL REQUIREMENTS |
|
ASTM F 218 : 2013 : REDLINE
|
Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass |
|
MIL-DTL-16232 Revision G:2000
|
PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE |
|
MIL-G-24716 Revision A:1993
|
GASKETS, METALLIC-FLEXIBLE GRAPHITE, SPIRAL WOUND |
|
MIL-DTL-22050 Revision E:2004
|
GASKET AND PACKING MATERIAL, RUBBER, FOR USE WITH POLAR FLUIDS, STEAM, AND AIR AT MODERATELY HIGH TEMPERATURES |
|
DIN 7081:1999-05
|
PRESSURE RESISTANT OBLONG SIGHT GLASSES OF BOROSILICATE GLASS WITHOUT LIMITATION IN THE RANGE OF LOW TEMPERATURE |
|
MIL-DTL-1222 Revision J:2000
|
STUDS, BOLTS, SCREWS AND NUTS FOR APPLICATIONS WHERE A HIGH DEGREE OF RELIABILITY IS REQUIRED; GENERAL SPECIFICATION FOR |
|
MIL-STD-792 Revision F:2006
|
IDENTIFICATION MARKING REQUIREMENTS FOR SPECIAL PURPOSE COMPONENTS |
|
MIL-STD-2035 Revision A:1995
|
NONDESTRUCTIVE TESTING ACCEPTANCE CRITERIA |
|
MIL-R-17131 Revision C:1981
|
RODS AND POWDERS, WELDING, SURFACING |
|
MIL-P-24503 Revision B:1991
|
PACKING MATERIAL, GRAPHITIC, CORRUGATED RIBBON OR TEXTURED TAPE AND PREFORMED RING |
|
SAE AMS 2750 : 2012
|
PYROMETRY |
|
SAE AMS 2371 : 2016
|
QUALITY ASSURANCE SAMPLING AND TESTING, CORROSION AND HEAT-RESISTANT STEELS AND ALLOYS, WROUGHT PRODUCTS AND FORGING STOCK |
|
NAVSEA T9074 AS GIB 010/271 : 0
|
REQUIREMENTS FOR NONDESTRUCTIVE TESTING METHODS |
|
MIL P 24583 : B
|
PACKING MATERIAL. GRAPHITIC OR CARBON BRAIDED YARN |
|
SAE AMS QQ S 763D : 2013(S2015)
|
STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS |
|
NAVSEA S9074 AR GIB 010/278 : 0
|
REQUIREMENTS FOR FABRICATION WELDING AND INSPECTION, AND CASTING INSPECTION AND REPAIR FOR MACHINERY, PIPING, AND PRESSURE VESSELS |
|
FF-S-200 Revision B:2004
|
SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
|
ASTM A 217/A217M : 2014 : REDLINE
|
Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service |
|
MIL S 901 : D
|
SHOCK TESTS, HI [HIGH IMPACT] SHIPBOARD MACHINERY, EQUIPMENT AND SYSTEMS, REQUIREMENTS FOR |
|
MIL-STD-767 Revision E:1997
|
Control of Hardware Cleanliness |
|
ASTM A 105/A105M : 2014-11
|
SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
|
ASTM F 104 : 2011 : REDLINE
|
Standard Classification System for Nonmetallic Gasket Materials |
|
ASME B16.34 : 2017
|
VALVES - FLANGED, THREADED, AND WELDING END |
|
FF-S-92 Revision C:2014
|
SCREW, MACHINE, SLOTTED, CROSS-RECESSED OR HEXAGON HEAD |
|
MIL-PRF-6855 Revision F:2009
|
RUBBER, SYNTHETIC, SHEETS, STRIPS, MOLDED OR EXTRUDED SHAPES, GENERAL SPECIFICATION FOR |
|
FED-STD-H28 Revision A:1994
|
Screw-Thread Standards for Federal Services |
|
MIL-STD-22 Revision D:1979
|
WELDED JOINT DESIGN |
|
ASME PV CODE SET : 2017
|
BOILER AND PRESSURE VESSEL CODE - COMPLETE SET |
|
MIL-DTL-25988 Revision C:2006
|
RUBBER, FLUOROSILICONE ELASTOMER, OIL- AND FUEL-RESISTANT, SHEETS, STRIPS, MOLDED PARTS, AND EXTRUDED SHAPES |
|
MIL-S-24093 Revision A:1991
|
STEEL FORGINGS, CARBON AND ALLOY HEAT TREATED |
|
MIL-STD-167-1 Revision A:2005
|
MECHANICAL VIBRATIONS OF SHIPBOARD EQUIPMENT (TYPE 1 - ENVIRONMENTAL AND TYPE 2 - INTERNALLY EXCITED) |
|
MIL-DTL-24696 Revision C:2008
|
GASKET, SHEET, NON-ASBESTOS |
|
FF-S-85 Revision D:2005
|
Screw, Cap, Slotted and Hexagon Head |