Skip to content
Please enter a keyword to search

  • MIL-DTL-28754 Revision E:2016

    Current The latest, up-to-date edition.

    Connectors, Electrical, Modular, and Component Parts General Specification for

    Available format(s):  PDF

    Language(s):  English

    Published date:  03-05-2016

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. REQUIREMENTS
    4. QUALITY ASSURANCE PROVISIONS
    5. PACKAGING
    6. NOTES
    APPENDIX - PROCEDURE FOR FIRST ARTICLE INSPECTION

    Abstract - (Show below) - (Hide below)

    Specifies the general requirements for backplane connectors, module connectors, cable connectors, and their component parts.

    Scope - (Show below) - (Hide below)

    This specification covers the general requirements for backplane connectors, module connectors, cable connectors, and their component parts.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes MIL C 28754 (D). (05/2016)
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-DTL-28754-62 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .050 CENTERS
    MIL DTL 28754/60 : A CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS
    MIL-DTL-28754-59 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE)
    MIL-DTL-28754-94 Revision A:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DIP, 0.4 PITCH, FORMAT C, D AND E
    MIL-DTL-28754-61 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, CONNECTOR, 100 PIN, CENTER, CROSSOVER, CONTACT TAILS ON .100 CENTERS (CERAMIC COMPATIBLE)
    MIL-DTL-28754-67 Revision A:2016 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, CENTER

    Standards Referencing This Book - (Show below) - (Hide below)

    MIL-STD-202-211 Base Document:2015 METHOD 211, TERMINAL STRENGTH
    SAE AMS QQ A 250/8 : 2014 ALUMINUM ALLOY 5052, PLATE AND SHEET
    MIL-C-28754-81 Revision A:1994 CONNECTORS, ELECTRICAL, MODULAR, TYPE III, FEMALE CONTACT & POLARIZING BUSHING SET, LOW INSERTION FORCE (LIF), REMOVABLE WIRE WRAPPOST TERMINAL
    SAE AMS QQ A 225/9 : 2014 ALUMINUM ALLOY 7075, BAR, ROD, WIRE, AND SPECIAL SHAPES; ROLLED, DRAWN, OR COLD FINISHED
    MIL-DTL-49055 Revision G:2017 CABLES, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR
    SAE AMS 4115 : 2015 ALUMINUM ALLOY, ROLLED OR COLD-FINISHED, BARS, RODS, WIRE, AND FLASH WELDED RINGS, ANNEALED, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O)
    SAE AMS 4027 : 2014 ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6 SHEET, -T651 PLATE), SOLUTION AND PRECIPITATION HEAT TREATED
    ASME Y14.5 : 2009 DIMENSIONING AND TOLERANCING
    MIL-DTL-45204 Revision D:2007 Gold Plating, Electrodeposited
    ANSI/NCSL Z540 3 : 2006(R2013) REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
    MIL-DTL-28754-38 Revision E:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, CONTACT, GROUNDING, WRAPPOST
    MIL-DTL-28754-6 Revision D:2014 CONNECTORS, ELECTRICAL, MODULAR, TYPE 4, 40 PIN, STRAIGHT THROUGH
    MIL-STD-1130 Revision C:2012 Connections, Electrical, Solderless Wrapped
    ASTM A 666 : 2015 : REDLINE Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
    SAE AMS 4026 : 2014 ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T4 SHEET, -T451 PLATE), SOLUTION HEAT TREATED AND NATURALLY AGED
    SAE AMS QQ A 200/8 : 2015 ALUMINUM ALLOY 6061, BAR, ROD, SHAPES, TUBE, AND WIRE, EXTRUDED A96061
    SAE AMS QQ N 290 : 2015 NICKEL PLATING (ELECTRODEPOSITED)
    ASTM A 693 : 2016 : REDLINE Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
    ASTM B 221 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
    ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
    SAE AMS 4116 : 2015 ALUMINUM ALLOY, BARS, RODS, AND WIRE, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T4), COLD FINISHED, SOLUTION HEAT TREATED AND NATURALLY AGED
    MIL-DTL-28754-21 Revision F:2014 CONNECTORS, ELECTRICAL, MODULAR, FRAME, CASTING, TYPE 4, DOUBLE SPAN
    MIL-C-28754-80 Revision A:1994 CONNECTORS, ELECTRICAL, MODULAR, TYPE III, FEMALE CONTACT & GROUND BUSHING SET, LOW INSERTION FORCE (LIF), REMOVABLE WIRE WRAPPOST TERMINAL
    ASTM B 121/B121M : 2016 : REDLINE Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar
    MIL-STD-889 Revision C:2016 DISSIMILAR METALS
    MIL-DTL-14072 Revision F:2013 FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT
    MIL-DTL-5541 Revision F:2006 Chemical Conversion Coatings on Aluminum and Aluminum Alloys
    MIL-DTL-28754-39 Revision D:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, KEYING PEGS
    SAE AMS QQ S 763D : 2013(S2015) STEEL, CORROSION RESISTANT, BARS, WIRE, SHAPES, AND FORGINGS
    ASTM D 4066 : 2013 Standard Classification System for Nylon Injection and Extrusion Materials (PA)
    MIL-DTL-16878 Revision H:2012 WIRE, ELECTRICAL, INSULATED, GENERAL SPECIFICATION FOR
    SAE AMSSTD595A:2017 COLORS USED IN GOVERNMENT PROCUREMENT
    MIL-DTL-28754-35 Revision F:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, MALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
    SAE AMS 4025 : 2014 ALUMINUM ALLOY, SHEET AND PLATE, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061-O) ANNEALED
    MIL-DTL-28754-34 Revision E:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND INSULATOR BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
    MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
    SAE AMS 4117 : 2015 ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE AND FLASH WELDED RINGS, 1.0MG - 0.60SI - 0.28CU - 0.20CR (6061; -T6, -T651)
    SAE AMS QQ A591 : 2014 ALUMINUM ALLOY DIE CASTINGS
    MIL-C-28754-79 Revision A:1994 CONNECTORS, ELECTRICAL, MODULAR, TYPE III, FEMALE CONTACT & INSULATOR BUSHING SET, LOW INSERTION FORCE (LIF), REMOVABLE WIRE WRAPPOST TERMINAL
    A-A-56032 Revision D:2003 INK, MARKING, EPOXY BASE
    SAE AS 81044 : 2011 WIRE, ELECTRICAL, CROSSLINKED POLYALKENE, CROSSLINKED ALKANE-IMIDE POLYMER, OR POLYARLYENE INSULATED, COPPER OR COPPER ALLOY
    ASTM B 209 : 2014 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
    MIL-DTL-55330 Revision C:2001 CONNECTORS, ELECTRICAL AND FIBER OPTIC, PACKAGING OF
    ASTM B 194 : 2015 : REDLINE Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
    SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
    MIL-DTL-28754-36 Revision E:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND GROUNDING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
    L-P-410 Revision A:1966 PLASTIC, POLYAMIDE (NYLON), RIGID: RODS, TUBES, FLATS, MOLDED AND CAST PARTS
    MIL-STD-202-105 Base Document:2015 METHOD 105, BAROMETRIC PRESSURE (REDUCED)
    MIL-STD-202-208 Base Document:2015 METHOD 208, SOLDERABILITY
    MIL-DTL-28754-37 Revision E:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR, TYPE 3, FEMALE CONTACT AND POLARIZING BUSHING SET, REMOVABLE WIRE WRAPPOST TERMINAL
    MIL-STD-202 Revision H:2015 ELECTRONIC AND ELECTRICAL COMPONENT PARTS
    SAE AMS 4128 : 2013 ALUMINUM ALLOY BARS, ROLLED OR COLD FINISHED, 1.0MG - 0.60SI - 0.30CU - 0.20CR (6061-T451), SOLUTION HEAT TREATED AND STRESS RELIEVED BY STRETCHING
    ASTM B 241/B241M : 2016 : REDLINE Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
    MIL-STD-1285 Revision D:2004 MARKING OF ELECTRICAL AND ELECTRONIC PARTS
    MIL-DTL-28754-31 Revision D:2015 CONNECTORS, ELECTRICAL, MODULAR, CONNECTOR ASSEMBLY, TYPE 5, 40-PIN, TWO PIECE INSERT, AND 20-PIN, ONE HALF, ONE PIECE INSERT
    SAE AMS QQ A 225/6 : 1998 ALUMINUM ALLOY, 2024, BAR, ROD, AND WIRE; ROLLED, DRAWN, OR COLD FINISHED
    FED-STD-H28 Revision A:1994 Screw-Thread Standards for Federal Services
    EIA 557 : 2006 STATISTICAL PROCESS CONTROL SYSTEMS
    ASTM B 928/B928M : 2015 : REDLINE Standard Specification for High Magnesium Aluminum-Alloy Products for Marine Service and Similar Environments
    MIL C 28754/67 : 0 CONNECTOR, ELECTRICAL, MODULAR, CONNECTOR FRAME, TYPE 4, DOUBLE SPAN, CENTER
    ASTM D 1867 : 2013 : REDLINE Standard Specification for Copper-Clad Thermosetting Laminates for Printed Wiring
    ASTM B 122/B122M : 2016 : REDLINE Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective