|
MIL-PRF-81380 Revision F:2015
|
FILTER/MONITOR, CONTAMINATION, HELICOPTER IN-FLIGHT REFUELING SYSTEM |
|
MIL-PRF-32517 Base Document:2015
|
SPLICE, CONDUCTOR, ELECTRICAL, COAXIAL CABLE, MATCHED IMPEDANCE, GENERAL SPECIFICATION FOR |
|
SAE AIR 744 : 2015
|
AEROSPACE AUXILIARY POWER SOURCES |
|
MIL-DTL-83054 Revision C:2003
|
BAFFLE AND INERTING MATERIAL, AIRCRAFT FUEL TANK |
|
SAE AS 5356 : 2017
|
COUPLING, FUEL LINE, FLEXIBLE, 125 PSI GENERAL SPECIFICATION FOR |
|
MIL-DTL-27422 Revision F:2014
|
TANK, FUEL, CRASH-RESISTANT, BALLISTIC-TOLERANT, AIRCRAFT |
|
SAE AS 85560 : 2013
|
BEARINGS, FIBER REINFORCED PLASTIC, SLEEVE, PLAIN, AND FLANGED, SELF-LUBRICATING; GENERAL SPECIFICATION FOR |
|
MIL-PRF-8805-48 Revision H:2004
|
SWITCHES, SENSITIVE, LIMIT, ROLLER LEVER, SELF-RETURN, RESILIANT SEAL, FLUID RESISTANT |
|
MIL-PRF-32584 Base Document:2017
|
Deck Covering Materials, Monolithic |
|
MIL-PRF-32080 Revision G:2014
|
TRUCK, AIRCRAFT FUELING-DEFUELING, 6,000 GALLON, A/S32R-11 |
|
MIL-PRF-24667 Revision C:2008
|
COATING SYSTEM, NON-SKID, FOR ROLL, SPRAY, OR SELF-ADHERING APPLICATION |
|
MIL-DTL-85052 Revision B:2005
|
CLAMP, LOOP, CUSHION, GENERAL SPECIFICATION FOR |
|
MIL-PRF-83383 Revision F:2017
|
Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
|
MIL-PRF-23653 Revision D:2009
|
PLASTIC TILES, VIBRATION DAMPING |
|
MIL-STD-1518 Revision E:2014
|
STORAGE, HANDLING, AND SERVICING OF AVIATION FUELS, LUBRICATING OILS, AND HYDRAULIC FLUIDS AT CONTRACTOR FACILITIES |
|
MIL-PRF-25439 Revision C:2013
|
TRANSMITTER RATE OF FLOW, IN-FLIGHT REFUELING, 0-10,000 PPM, TYPE MB-3 |
|
MIL-PRF-85322 Revision C:2014
|
COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
|
MIL-PRF-32577 Base Document:2017
|
COATING SYSTEM, NONSKID, METALLIC THERMAL SPRAY APPLICATION |
|
MIL-DTL-9395-31 Revision E:2006
|
SWITCHES, PRESSURE, (GAGE), TYPE 2, 5 AMPERES |
|
MIL-DTL-5815 Revision H:2012
|
ANTENNA, AIRBORNE, UHF - BAND, GENERAL SPECIFICATION FOR |
|
MIL-PRF-32177 Revision A:2012
|
CLEANING COMPOUND, NONSKID |
|
MIL-DTL-25038 Revision J:2012
|
WIRE, ELECTRICAL, HIGH TEMPERATURE, FIRE RESISTANT, AND FLIGHT CRITICAL |
|
MIL-PRF-32098 Revision A:2004
|
ULTRAFILTRATION SYSTEM, 10-GALLON PER MINUTE OILY WASTE MEMBRANE (OWMS-10) |
|
MIL-DTL-9395-6 Revision C:2006
|
SWITCHES, PRESSURE (ABSOLUTE), TYPE 1, SPDT, 3 AMPERES |
|
SAE AS 85485 : 2017
|
CABLE, ELECTRIC, FILTER LINE, RADIO FREQUENCY ABSORPTIVE |
|
SAE AS 83519 : 2015
|
SHIELD TERMINATION, SOLDER STYLE, INSULATED, HEAT-SHRINKABLE, ENVIRONMENT RESISTANT GENERAL SPECIFICATION FOR |
|
SAE AS 23190 : 2015
|
WIRING, POSITIONING, AND SUPPORT ACCESSORIES |
|
EI/JIG 1530 : 2013
|
QUALITY ASSURANCE REQUIREMENTS FOR THE MANUFACTURE, STORAGE AND DISTRIBUTION OF AVIATION FUEL TO AIRPORTS |
|
ASTM D 7171 : 2016 : REDLINE
|
Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy |
|
SAE AS 81714 : 2014
|
TERMINAL JUNCTION SYSTEM (TJS), ENVIRONMENT RESISTANT, GENERAL SPECIFICATION FOR |
|
ASTM D 4529 : 2017 : REDLINE
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
|
MIL-DTL-83797 Revision C:2008
|
HOSE, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83731 Revision E:2016
|
SWITCHES, TOGGLE, UNSEALED AND SEALED, GENERAL SPECIFICATION FOR |
|
MIL-DTL-24640 Revision C:2011
|
CABLES, LIGHTWEIGHT, LOW SMOKE, ELECTRIC, FOR SHIPBOARD USE, GENERAL SPECIFICATION FOR |
|
A-A-59498 Base Document:1999
|
TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, DS SAFETY RATED, FOR SHIPBOARD USE |
|
MIL-DTL-24643 Revision C:2009
|
Cables, Electric, Low Smoke, Halogen-Free, for Shipboard Use, General Specification for |
|
MIL-DTL-5578 Revision D:2008
|
TANKS, FUEL, AIRCRAFT, SELF-SEALING |
|
MIL-DTL-87104 Revision C:2014
|
COAXIAL ASSEMBLIES, GENERAL SPECIFICATION FOR |
|
MIL-PRF-7061 Revision E:2014
|
HOSE, ELASTOMERIC, AIRCRAFT, SELF-SEALING, AROMATIC FUEL |
|
A-A-59492 Base Document:1999
|
TRUCK, FORKLIFT, DIESEL ENGINE DRIVEN, 120 INCH LIFT HEIGHT, DS SAFETY RATED, PNEUMATIC RUBBER TIRES, ROUGH TERRAIN, FOR SHIPBOARD USE |
|
MIL-DTL-22263 Revision C:2009
|
Coupling Fuel Line, Flexible, 125 PSI General Specification for |
|
MIL-DTL-32496 Base Document:2014
|
GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
|
MIL-PRF-8805-49 Revision J:2012
|
Switches, Sensitive, Limit, Rotary Linkage Lever (Nonself-Return), Resilient Seal, Fluid Resistant |
|
MIL-DTL-24299 Revision B:2017
|
HEATERS, LUBRICATING OIL AND FUEL, ELECTRIC, NAVAL SHIPBOARD |
|
MIL-PRF-62678 Revision B:2010
|
PUMP, FUEL, ELECTRICAL: 12 AND 24 VOLT DIRECT CURRENT (METRIC) |
|
P-W-2891 Revision A:2002
|
WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
|
MIL-DTL-25708 Revision F:2008
|
ANTENNAS, BLADE, L-BAND, GENERAL SPECIFICATION FOR |
|
MIL-PRF-32490 Base Document:2014
|
ADDITIVE, LUBRICITY IMPROVER, DIESEL |
|
MIL-PRF-32020 Revision B:2011
|
PROVER, LIQUID VOLUMETRIC POSITIVE DISPLACEMENT METER |
|
SAE ARP 5369 : 2016
|
GUIDELINES FOR WIRE IDENTIFICATION MARKING USING THE HOT STAMP PROCESS |
|
SAE AS 81934 : 2016
|
BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
|
SAE AS 81582 : 2017
|
CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
|
MIL-HDBK-510 Revision A:2014
|
AEROSPACE FUELS CERTIFICATION |
|
MIL-DTL-25516 Revision F:2004
|
CONNECTORS, ELECTRICAL, MINIATURE, COAXIAL, ENVIRONMENT RESISTANT TYPE, GENERAL SPECIFICATION FOR |
|
MIL-PRF-32097 Revision A:2005
|
Filtration Module, Oily Waste Membrane Type |
|
MIL-DTL-8777 Revision F:2011
|
WIRE, ELECTRICAL, SILICONE-INSULATED, COPPER, 600-VOLT, 200 DEGREES C |
|
MIL-DTL-81381 Revision C:2005
|
WIRE, ELECTRIC, POLYIMIDE-INSULATED, COPPER OR COPPER ALLOY |
|
MIL-DTL-38195 Revision D:2000
|
GENERATOR SET, GAS TURBINE ENGINE, 60 KW 400 HZ, GENERAL PURPOSE |
|
MIL-DTL-3702 Revision F:2012
|
CABLE, POWER, ELECTRICAL: IGNITION, HIGH-TENSION |
|
MIL-DTL-83528 Revision H:2018
|
Gasketing Material, Conductive, Shielding Gasket, Electronic, Elastomer, EMI/RFI, General Specification for |
|
SAE AIR5691A : 2017
|
GUIDANCE FOR THE DESIGN AND INSTALLATION OF FUEL QUANTITY INDICATING SYSTEMS |
|
MIL-DTL-9395-39 Revision D:2010
|
SWITCHES, PRESSURE, (GAUGE) TYPE 2, LOW LEVEL TO 5 AMPERES |
|
MIL-PRF-38299 Revision E:2011
|
FLUID, PURGING, FOR PRESERVING FUEL TANKS OF JET AIRCRAFT |
|
MIL-PRF-32278 Revision B:2008
|
GAUGE, TACTICAL AUTOMATED TANK (TATG) - FUELS OPERATIONAL READINESS CAPABILITY EQUIPMENT (FORCE) |
|
MIL-DTL-81248 Revision C:2006
|
DETECTOR PAD, FREE WATER |
|
MIL-DTL-83526 Revision D:2014
|
CONNECTORS, FIBER OPTIC, CIRCULAR, ENVIRONMENTAL RESISTANT, HERMAPHRODITIC, GENERAL SPECIFICATION FOR |
|
MIL-PRF-81352 Revision C:2005
|
COATINGS, AIRCRAFT TOUCH-UP |
|
SAE ARP 81490 : 2016
|
TRANSMISSION LINES, TRANSVERSE ELECTROMAGNETIC MODE |
|
SAE AS 7928 : 2011
|
TERMINALS, LUG: SPLICES, CONDUCTOR: CRIMP STYLE, COPPER, GENERAL SPECIFICATION FOR |
|
SAE AS 620 : 2012
|
HOSE ASSEMBLIES, CONVOLUTED POLYTETRAFLUOROETHYLENE METALLIC REINFORCED, HIGH TEMPERATURE, MEDIUM PRESSURE, AIRCRAFT |
|
SAE AS 5958 : 2017
|
FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPARABLE, FLUID SYSTEM FOR OPERATING PRESSURES UP TO AND INCLUDING 5080 PSI (35 000 KPA), SPECIFICATION FOR |
|
ASTM D 3343 : 2016 : REDLINE
|
Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels |
|
SAE AS 1701 : 2017
|
LUBRICANT, SOLID FILM |
|
ASTM D 1405/D1405M : 2008
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels |
|
MIL-PRF-8805-39 Revision J:2014
|
SWITCHES, SENSITIVE, LIMIT, PLUNGER, 7 AMPERES, RESILIENT SEAL, FLUID RESISTANT |
|
MIL-DTL-85061 Revision C:2009
|
COUPLING, FUEL LINE, FLEXIBLE, 125 PSI |
|
UFC 3-460-01 : Change 3
|
UNIFIED FACILITIES CRITERIA - DESIGN: PETROLEUM FUEL FACILITIES |
|
SAE AS 82819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
|
MIL-PRF-8805-43 Revision K:2014
|
SWITCHES, SENSITIVE, PLUNGER, RESILIENT SEAL, FLUID RESISTANT |
|
MIL-PRF-81975 Revision C:2008
|
COUPLINGS, REGULATED, AERIAL PRESSURE REFUELING TYPE MA-2, TYPE MA-3 AND TYPE MA-4 |
|
MIL-DTL-83723-27 Revision C:2015
|
CONNECTORS, ELECTRICAL, BACKSHELL, WITH HEAT-SHRINKABLE STRAIN-RELIEF BOOT (STRAIGHT AND RIGHT ANGLE), THREADED COUPLING |
|
MIL-DTL-26482 Revision H:2007
|
Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
|
MIL-HDBK-510-1 Revision A:2010
|
AEROSPACE FUELS CERTIFICATION |
|
SAE AS 5258 : 2012
|
INSULATING COMPONENT, MOLDED, ELECTRICAL, HEAT SHRINKABLE, CONNECTOR AND CABLE ACCESSORY, SEALING STRAIN RELIEF, GENERAL SPECIFICATION FOR |
|
MIL-PRF-32058 Revision B:2017
|
CHOCK, WHEEL-TRACK - AVIATION, ADJUSTABLE ROPE TYPE |
|
MIL-DTL-49292 Revision B:2006
|
Cable Assemblies, Nonpressure Proof, Fiber Optic, Metric, General Specification for |
|
MIL-PRF-23236 Revision D:2009
|
Coating Systems for Ship Structures |
|
MIL-DTL-7899 Revision D:2014
|
VALVES, CHECK, AIRCRAFT FUEL SYSTEM |
|
MIL-DTL-32234 Base Document:2007
|
CONNECTORS, ELECTRICAL, ULTRA HIGH DENSITY, MODULAR, BLADE AND FORK, EIGHT ROW, GENERAL SPECIFICATION FOR |
|
FAA AC 20-24 : 2014
|
APPROVAL OF PROPULSION FUELS, ADDITIVES, AND LUBRICATING OILS |
|
MIL-PRF-26139 Revision E:2015
|
TESTER, PRESSURIZED CABIN LEAKAGE, AIRCRAFT, (AF/M24T-3 AND AF/M32T-1) |
|
MIL-STD-3004 Revision D:2014
|
QUALITY ASSURANCE/SURVEILLANCE FOR FUELS, LUBRICANTS AND RELATED PRODUCTS |
|
MIL-PRF-85285 Revision E:2012
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
|
MIL-PRF-32090 Revision A:2016
|
DELIVERY SYSTEM, AERIAL, BULK FUEL |
|
MIL-PRF-53051 Revision C:2017
|
PUMPING ASSEMBLIES, WHEEL-MOUNTED, DIESEL ENGINE DRIVEN, BULK TRANSFER, FUEL AND POTABLE WATER PUMPING SERVICE |
|
MIL-S-8805-85 Revision E:2005
|
SWITCH, SENSITIVE, ROTARY (NON-SELF RETURN), 4 AMPERES, RESILIENT SEAL |
|
SAE AS 1356 : 2012
|
LIFE RAFTS |
|
MIL-DTL-9395-27 Revision G:2006
|
SWITCHES, PRESSURE, GAUGE (TYPE 2), 3 AMPERES |
|
JSSG-2001 Revision B:2004
|
Air Vehicle |
|
MS21346 Revision F:2005
|
Switch, Toggle, Positive Break, Lever Lock and Toggle, Miniature, Toggle Sealed, Integrated Wire Terminals, Single Pole, .469 Mounting Bushing |
|
MIL-PRF-62430 Revision B:2010
|
HARNESS ASSEMBLY, THERMOCOUPLE |
|
SAE AS 81819 : 2010
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
|
SAE AIR 7484 : 2018
|
GUIDANCE ON THE IMPACT OF FUEL PROPERTIES ON FUEL SYSTEM DESIGN AND OPERATION |
|
SAE AS 2078 : 2015
|
TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE) |
|
SAE ARP 1827C : 2014
|
MEASURING AIRCRAFT GAS TURBINE ENGINE FINE FUEL FILTER ELEMENT PERFORMANCE |
|
SAE AS 81824 : 2016
|
SPLICE, ELECTRIC, CRIMP, COPPER, ENVIRONMENT RESISTANT |
|
EI 1550 : 2014
|
HANDBOOK ON EQUIPMENT USED FOR THE MAINTENANCE AND DELIVERY OF CLEAN AVIATION FUEL |
|
MIL-PRF-8805-40 Revision K:2014
|
SWITCHES, SENSITIVE, PLUNGER, RESILIENT SEAL, FLUID RESISTANT |
|
MIL-PRF-57267 Base Document:2017
|
COUPLING, AERIAL PRESSURE REFUELING TYPE MA-5 |
|
MIL-DTL-9395-26 Revision D:2006
|
SWITCHES, PRESSURE, ABSOLUTE (TYPE 1), 3 AMPERES |
|
MIL-DTL-25707 Revision G:2015
|
ANTENNA, FLUSH MOUNT, L-BAND, GENERAL SPECIFICATION FOR |
|
MIL PRF 16884 : K
|
FUEL, NAVAL DISTILLATE |
|
MS21347 Revision K:2005
|
Switch, Toggle, Positive Break, Miniature, Toggle Sealed, and --Lever Lock-- Miniature, Toggle Sealed, Integrated Wire Terminals, Double Pole, .469 Mounting Bushing |
|
EI 1581 : 2016
|
SPECIFICATIONS AND LABORATORY QUALIFICATION PROCEDURES FOR AVIATION FUEL FILTER/WATER SEPARATORS |
|
ASTM D 7224 : 2014-12
|
TEST METHOD FOR DETERMINING WATER SEPARATION CHARACTERISTICS OF KEROSINE-TYPE AVIATION TURBINE FUELS CONTAINING ADDITIVES BY PORTABLE SEPAROMETER |
|
MIL-PRF-32148 Base Document:2005
|
FILTER SEPARATOR ELEMENTS, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD |
|
MIL-DTL-9395-8 Revision E:2006
|
SWITCHES, PRESSURE, (GAGE), TYPE 2, SPDT, 10 AMPERES |
|
MIL-DTL-22612 Revision D:2015
|
DETECTOR, COMBINED CONTAMINATED FUEL |
|
SAE AS 60491 : 2015
|
SLEEVE, PROTECTION, FOR CABLE AND HARNESS PROTECTION |
|
MIL-PRF-38715 Revision B:1996
|
INDICATOR, COMBUSTIBLE GAS AND OXYGEN |
|
MIL-DTL-6615 Revision G:2008
|
Hose Assemblies, Rubber, Fuel and Nonpotable Water, with Reattachable Couplings, Low Temperature, General Specification for |
|
MIL-PRF-87260 Revision B:2006
|
Foam Material, Explosion Suppression, Inherently Electrostatically Conductive, for Aircraft Fuel Tanks |
|
A-A-59918 Revision B:2014
|
SELF PROPELLED CONCRETE SAW (SPCS) |
|
MIL-DTL-49055 Revision G:2017
|
CABLES, POWER, ELECTRICAL, (FLEXIBLE, FLAT, UNSHIELDED), (ROUND CONDUCTOR), GENERAL SPECIFICATION FOR |
|
SAE MAP 749 : 2015
|
AIRCRAFT TURBINE ENGINE FUEL SYSTEM COMPONENT ENDURANCE TEST PROCEDURE (ROOM TEMPERATURE CONTAMINATED FUEL) |
|
MIL-PRF-8805-80 Revision G:2009
|
SWITCH, SENSITIVE, LIMIT, HERMETIC SEAL |
|
MIL-PRF-83323 Revision D:2016
|
TESTER, UNIVERSAL RECEPTACLE, AERIAL REFUELING |
|
MIL-DTL-9395-29 Revision C:2006
|
SWITCHES, PRESSURE, (DIFFERENTIAL) (TYPE 3), 4 AMPERES |
|
MIL-PRF-62625 Revision B:2009
|
VALVE, FUEL-DRAIN |
|
MIL-DTL-26500 Revision G:2011
|
CONNECTORS, GENERAL PURPOSE, ELECTRICAL, MINIATURE, CIRCULAR, ENVIRONMENT RESISTING OR HERMETICALLY SEALED, GENERAL SPECIFICATION FOR |
|
MIL-DTL-83733 Revision E:2006
|
CONNECTORS, ELECTRICAL MINIATURE, RECTANGULAR TYPE, RACK TO PANEL, ENVIRONMENT RESISTING, 200 DEGREES C TOTAL CONTINUOUS OPERATING TEMPERATURE, GENERAL SPECIFICATION FOR |
|
MIL-PRF-25017 Revision H:2011
|
INHIBITOR, CORROSION/LUBRICITY IMPROVER, FUEL SOLUBLE (NATO S-1747) |
|
MIL-PRF-370 Revision K:2017
|
HOSE AND HOSE ASSEMBLIES, NONMETALLIC: ELASTOMERIC, LIQUID FUEL |
|
MIL-STD-2161 Revision C:2014
|
Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
|
SAE AS 5729 : 2016
|
O-RING MOLDED FROM AMS7379 (FLUOROCARBON) MATERIAL |
|
MIL-DTL-62548 Revision C:2010
|
LEAD, IGNITION |
|
MIL-PRF-52109 Revision H:2010
|
PUMPING ASSEMBLIES, PORTABLE, BULK TRANSFER FUEL AND WATER PUMPING SERVICE |
|
MIL-PRF-53064 Revision C:2017
|
HOSE ASSEMBLY, ELASTOMER: LIGHTWEIGHT, COLLAPSIBLE; LIQUID FUEL |
|
MIL-DTL-24788 Revision B:2017
|
Coupling Assembly, Semi-Dry-Break, Quick-Disconnect Fuel, with or without Continuity Switch |
|
MIL-PRF-83779 Revision C:2013
|
WATER INDICATING PASTE |
|
MIL-PRF-32233 Revision B:2015
|
TANKS, COLLAPSIBLE, 3,000, 10,000, 20,000, 50,000, & 210,000 U.S. GALLONS, FUEL |
|
SAE AIR 4170 : 2016
|
RETICULATED POLYURETHANE FOAM EXPLOSION SUPPRESSION MATERIAL FOR FUEL SYSTEMS AND DRY BAYS |
|
SAE AS 81914 : 2016
|
TUBING, PLASTIC, FLEXIBLE, CONVOLUTED, CONDUIT, GENERAL SPECIFICATION FOR |
|
SAE AS 22759 : 2014
|
WIRE, ELECTRICAL, FLUOROPOLYMER-INSULATED, COPPER OR COPPER ALLOY |
|
SAE AS 5877 : 2016
|
DETAILED SPECIFICATION FOR AIRCRAFT PRESSURE REFUELING NOZZLE |
|
EI/JIG 1530 : 2019
|
Quality assurance requirements for the manufacture, storage and distribution of aviation fuel to airports (A4) |
|
SAE AIR 786 : 2014
|
ELASTOMER COMPATIBILITY CONSIDERATIONS RELATIVE TO ELASTOMERIC SEALANT SELECTION |
|
SAE ARP 901 : 2017
|
BUBBLE-POINT TEST METHOD |
|
BS EN 3716-001:2006
|
Aerospace series. Connectors, single-way, with triaxial interface, for transmission of digital data Technical specification |
|
EN 3716-001 : 2006
|
AEROSPACE SERIES - CONNECTOR, SINGLE-WAY, WITH TRIAXIAL INTERFACE, FOR TRANSMISSION OF DIGITAL DATA - PART 001: TECHNICAL SPECIFICATION |
|
MIL-F-26301 Revision H:2014
|
FLASHER, SOLID STATE, AIRCRAFT NAVIGATIONAL LIGHT, GENERAL SPECIFICATION FOR |
|
MIL-DTL-9129 Revision G:2014
|
Discharges, Electrostatic General Specification for |
|
IP 355 : 2014
|
PETROLEUM PRODUCTS - ESTIMATION OF NET SPECIFIC ENERGY OF AVIATION TURBINE FUELS USING HYDROGEN CONTENT DATA |
|
EI 1535 : 2016
|
MINIMUM CRITERIA TO DETERMINE ACCEPTABILITY OF ADDITIVES FOR USE IN MULTI-PRODUCT PIPELINES CO-TRANSPORTING JET FUEL |
|
MIL-PRF-81904 Revision C:2011
|
COATING COMPOUND, THERMAL-INSULATION |
|
BS ISO 8829-1:2009
|
Aerospace. Test methods for polytetraflouroethylene (PTFE) inner-tube hose assemblies Metallic (stainless steel) braid |
|
MIL-HDBK-844 Revision B:2014
|
AIRCRAFT REFUELING HANDBOOK FOR NAVY/MARINE CORPS AIRCRAFT |
|
ISO 8829-1:2009
|
Aerospace Test methods for polytetrafluoroethylene (PTFE) inner-tube hose assemblies Part 1: Metallic (stainless steel) braid |
|
MIL-STD-3013 Revision A:2008
|
GLOSSARY OF DEFINITIONS, GROUND RULES, AND MISSION PROFILES TO DEFINE AIR VEHICLE PERFORMANCE CAPABILITY |
|
MIL-PRF-83041 Revision C:2000
|
FILTER-SEPARATOR, LIQUID FUEL SKID MOUNTED, 600 GALLONS PER MINUTE |
|
SAE AS 506 : 2004
|
HIGH TEMPERATURE INSULATED TERMINALS & SPLICES |
|
MIL-DTL-26521 Revision L:2014
|
Hose Assembly, Nonmetallic, Fuel, Collapsible, Low Temperature with Non-Reusable Couplings |
|
MIL-DTL-9395-32 Revision D:2006
|
SWITCHES, PRESSURE, DIFFERENTIAL (TYPE 3), 4 AMPERES |
|
MIL-DTL-9395-38 Revision C:2006
|
SWITCHES, PRESSURE, (GAGE) TYPE 2, LOW LEVEL TO 5 AMPERES |
|
MIL-PRF-32007 Base Document:2003
|
OILY WASTEWATER SEPARATION SYSTEM, 6.7-GALLON PER MINUTE NAVY INTEGRATED MEMBRANE SYSTEM (NIMS) |
|
MIL-PRF-32470 Base Document:2013
|
TRUCK, FORKLIFT, 10,000 LB CAPACITY, VARIABLE REACH, ROUGH TERRAIN |
|
MIL-DTL-83420 Revision P:2017
|
WIRE ROPE, FLEXIBLE, FOR AIRCRAFT CONTROL, GENERAL SPECIFICATION FOR |
|
MIL-DTL-62421 Revision A:2009
|
CONTROL, UNIT, ELECTRONIC, DIGITAL |
|
MIL DTL 17 : J
|
CABLES, RADIO FREQUENCY, FLEXIBLE AND SEMIRIGID, GENERAL SPECIFICATION FOR |
|
MIL-DTL-38159 Revision D:2015
|
CONNECTORS, ELECTRIC, RAMP POWER, 416/240 VOLTS |
|
SAE AS 5590 : 2013
|
CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR |
|
MIL-PRF-15618 Revision H:2006
|
FILTER-SEPARATOR, FLUID, PRESSURE, AVIATION AND DISTILLATE FUEL, NAVAL SHIPBOARD |
|
MIL-DTL-52849 Revision E:2008
|
TEST KIT - AVIATION FUEL CONTAMINATION (PORTABLE) |
|
MIL-PRF-81298 Revision E:2011
|
Dye, Liquid for the Detection of Leaks in Aircraft Fuel Systems |
|
SAE AS 81511 : 2016
|
CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
|
SAE AS 83819 : 2013
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
|
SAE AS 81703 : 2012
|
CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
|
SAE AS 6116 : 2016
|
ALUMINUM FITTINGS, AXIALLY SWAGED TUBE WITH FLARELESS SEPERABLE, FLUID SYSTEM, UP TO 1500 PSI (10340 KPA) MAXIMUM, SPECIFICATION FOR |
|
SAE AS 8942 : 2014
|
BEARINGS, PLAIN AND PTFE LINED, SELF - ALIGNING |
|
SAE AIR 4023 : 2016
|
AIRCRAFT TURBINE FUEL CONTAMINATION HISTORY AND ENDURANCE TEST REQUIREMENTS |
|
SAE AS 6224 : 2015
|
WRAP-AROUND INSULATION REPAIR AND PROTECTION SLEEVE, PERMANENT, ELECTRIC, ENVIRONMENT RESISTANT |
|
SAE AS 81820 : 2014
|
BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
|
ASTM D 1405/D1405M : 2008 : R2013
|
Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019) |
|
SAE AMS S 83474 : 2016
|
SHIMS, MOLDED, FILLED RESIN COMPOUND AND SHEET PREPEG |