Skip to content
Please enter a keyword to search

  • MIL-STD-202-215 Base Document:2015

    NA Status of Standard is Unknown

    METHOD 215, RESISTANCE TO SOLVENTS

    Available format(s):  PDF

    Language(s):  English

    Published date: 

    Publisher:  US Military Specs/Standards/Handbooks

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1. SCOPE
    2. APPLICABLE DOCUMENTS
    3. DEFINITIONS
    4. GENERAL REQUIREMENTS
    5. DETAILED REQUIREMENTS
    6. NOTES

    Abstract - (Show below) - (Hide below)

    Aim of this test is as follows: a) To verify that markings or color coding will not become illegible or discolored on the parts (including printed wiring boards) when subjected to solvents and processes normally used to clean solder flux, fingerprints, and other contaminants from printed-wiring and terminal-board assemblies, etc, and b) To verify that component protective coatings and encapsulant materials are not degraded to the point where electrical or mechanical integrity is disturbed when subjected to solvents and processes normally used to clean solder flux, fingerprints, and other contaminants from printed wiring and terminal board assemblies, etc.

    General Product Information - (Show below) - (Hide below)

    Committee FSC 59GP
    Document Type Standard
    Publisher US Military Specs/Standards/Handbooks
    Status NA

    Standards Referenced By This Book - (Show below) - (Hide below)

    MIL-R-10509 Revision J:2007 RESISTOR, FIXED, FILM (HIGH STABILITY) GENERAL SPECIFICATION FOR
    MIL-DTL-23971 Revision E:2017 POWER DIVIDERS, POWER COMBINERS, AND POWER DIVIDER/COMBINERS, GENERAL SPECIFICATION FOR
    MIL-PRF-94 Revision G:2006 Resistor, Variable, Composition, General Specification for
    MIL-PRF-83383 Revision F:2017 Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For
    MIL-DTL-39030 Revision F:2014 DUMMY LOADS, ELECTRICAL, COAXIAL AND STRIPLINE, GENERAL SPECIFICATION FOR
    MIL-DTL-83513 Revision G:2008 Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for
    MIL-PRF-914 Revision C:2008 RESISTOR NETWORK, FIXED, FILM, SURFACE MOUNT, NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    MIL-PRF-32192 Base Document:2005 RESISTOR, CHIP, THERMAL (THERMISTOR), GENERAL SPECIFICATION FOR
    MIL-PRF-32159 Base Document:2004 Resistor, Chip, Fixed, Film, Zero OHM, Industrial, High Reliability, Space Level, General Specification for
    MIL-PRF-39017 Revision G:2006 RESISTOR, FIXED, FILM (INSULATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    MIL-DTL-32139 Revision B:2017 Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for
    MIL-PRF-39003 Revision N:2016 Capacitor, Fixed, Electrolytic (Solid Electrolyte), Tantalum, Established Reliability, General Specification for
    MIL-PRF-49467 Revision C:2005 Capacitor, Fixed, Ceramic, Multilayer, High Voltage (General Purpose), General Specification For
    MIL-PRF-8805 Revision G:2016 SWITCHES AND SWITCH ASSEMBLIES, SENSITIVE, SNAP ACTION (BASIC, LIMIT, PUSH BUTTON AND TOGGLE SWITCHES), GENERAL SPECIFICATION FOR
    MIL-PRF-55342 Revision H:2003 RESISTOR, CHIP, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, SPACE LEVEL, GENERAL SPECIFICATION FOR
    MIL-PRF-55182 Revision J:2017 RESISTOR, FIXED, FILM, NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR
    MIL-PRF-28861 Revision E:2016 FILTERS AND CAPACITORS, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR
    MIL-PRF-22885-115 Base Document:2012 SWITCHES, PUSHBUTTON, ULTRA-COMPACT, LED ILLUMINATION, NVIS, SEALED
    MIL-PRF-23269 Revision H:2016 CAPACITOR, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR
    MIL-PRF-49465 Revision C:2007 RESISTOR, FIXED, METAL ELEMENT, POWER TYPE, VERY LOW RESISTANCE VALUES, GENERAL SPECIFICATION FOR
    MIL-DTL-12883 Revision F:2003 Sockets and Accessories for Plug-in Electronic Components, General Specification for
    MIL-PRF-39022 Revision J:2015 Capacitor, Fixed, Metallized, Paper-Plastic Film or Plastic Film Dielectric, Direct and Alternating Current, (Hermetically Sealed in Metal or Ceramic Cases), Established Reliability, General Specification for
    MIL-PRF-39019 Revision F:2010 CIRCUIT BREAKERS, MAGNETIC, LOW-POWER SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR
    MIL-PRF-32560-6 Base Document:2016 COIL, RADIO FREQUENCY, CHIP, FIXED, OPEN CONSTRUCTION ESTABLISHED RELIABILITY, SURFACE MOUNT, 0603 SIZE
    MIL-PRF-19978 Revision L:2016 Capacitor, Fixed, Plastic (or Paper-Plastic) Dielectric (Hermetically Sealed in Metal, Ceramic or Glass Cases), Established and Non-Established Reliability, General Specification for
    MIL-PRF-39014 Revision J:2016 Capacitor, Fixed, Ceramic Dielectric (General Purpose), Established Reliability and Non-Established Reliability, General Specification for
    MIL-PRF-23648 Revision F:2005 Resistor, Thermal (Thermistor) Insulated, General Specification for
    MIL-R-83516 Revision C:2017 Relays, Reed, Dry, General Specification for (No S/S Document)
    MIL-PRF-28750 Revision J:2017 RELAYS, SOLID STATE, GENERAL SPECIFICATION FOR
    MIL-PRF-39005 Revision G:2013 Resistor, Fixed, Wirewound (Accurate), Nonestablished Reliability, and Established Reliability, General Specification for
    MIL-PRF-11693 Revision E:2012 CAPACITOR, FEED THROUGH, RADIO-INTERFERENCE REDUCTION, DC (HERMETICALLY SEALED IN METAL CASES), ESTABLISHED AND NON-ESTABLISHED RELIABILITY GENERAL SPECIFICATION FOR
    MIL-PRF-39001 Revision E:2009 Capacitor, Fixed, MICA Dielectric, Established Reliability and Nonestablished Reliability, General Specification for
    MIL-PRF-55514 Revision G:2013 Capacitor, Fixed, Plastic (or Metallized Plastic) Dielectric, DC or DC-AC, in Nonmetal Cases, Non-Established and Established Reliability General Specification for
    MIL-DTL-8834 Revision K:2016 Switches, Toggle, Positive Break, General Specification for
    MIL-PRF-49470 Revision D:2017 CAPACITOR, FIXED, CERAMIC DIELECTRIC, SWITCH MODE POWER SUPPLY (GENERAL PURPOSE AND TEMPERATURE STABLE), STANDARD RELIABILITY AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
    MIL-PRF-6106 Revision P:2014 Relays, Electromagnetic General Specification for
    IEC PAS 62686-2:2016 Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components
    PD IEC/PAS 62686-2:2016 Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for passive components
    MIL-DTL-83725 Revision E:2017 Relays, Vacuum, General Specification for
    MIL-PRF-83421 Revision F:2017 CAPACITOR, FIXED, METALLIZED PLASTIC FILM DIELECTRIC, (DC, AC, OR DC AND AC), HERMETICALLY SEALED IN METAL CASES OR CERAMIC CASES, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    MIL-PRF-39016 Revision H:2017 Relays, Electromagnetic, Established Reliability, General Specification for
    MIL-PRF-83530 Revision C:2008 RESISTOR, VOLTAGE SENSITIVE (VARISTOR, METAL-OXIDE), GENERAL SPECIFICATION FOR
    MIL-PRF-28776 Revision H:2017 Relays, Hybrid, Established Reliability, General Specification for
    MIL-PRF-83536 Revision F:2017 RELAYS, ELECTROMAGNETIC, ESTABLISHED RELIABILITY, 25 AMPERES AND BELOW, GENERAL SPECIFICATION FOR
    MIL-DTL-5757 Revision N:2017 RELAYS, ELECTROMAGNETIC, GENERAL SPECIFICATION FOR
    MIL-PRF-83726 Revision H:2017 Relays, Hybrid and Solid State, Time Delay, General Specification for
    MIL-PRF-39015 Revision E:2006 RESISTOR, VARIABLE, WIREWOUND, (LEAD SCREW ACTUATED), NONESTABLISHED RELIABILITY, AND ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    MIL-PRF-81 Revision G:2017 CAPACITOR, VARIABLE, CERAMIC DIELECTRIC, GENERAL SPECIFICATION FOR
    MIL-PRF-22684 Revision F:2006 RESISTOR, FIXED, FILM (INSULATED) GENERAL SPECIFICATION FOR
    MIL-PRF-39007 Revision J:2005 Resistor, Fixed, Wirewound, (Power Type) Nonestablished Reliability, Established Reliability, and Space Level General Specification for
    MIL-PRF-39006 Revision G:2006 CAPACITOR, FIXED, ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    MIL-PRF-39010 Revision E:1997 Coil, Radio Frequency, Fixed, Molded, Established Reliability and Nonestablished Reliability, General Specification for
    MIL-PRF-94-7 Revision C:2006 RESISTOR, VARIABLE, NONWIRE WOUND PRINTED CIRCUIT BROAD MOUNTING, STYLE RV8
    MIL-PRF-20 Revision N:2017 CAPACITOR, FIXED, CERAMIC DIELECTRIC, (TEMPERATURE COMPENSATING), ESTABLISHED RELIABILITY AND NON-ESTABLISHED RELIABILITY, GENERAL SPECIFICATION FOR
    MIL PRF 55365 : 0012 CAPACITOR, FIXED, ELECTROLYTIC (TANTALUM), CHIP, ESTABLISHED RELIABILITY, NON-ESTABLISHED RELIABILITY, AND HIGH RELIABILITY, GENERAL SPECIFICATION FOR
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective