MS20761 Revision C:2016

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES

Available format(s): PDF

Superseded date: 10-05-2021

Language(s):

Published date:

General Product Information - (Show below) - (Hide below)

Committee	FSC 4730
Document Type	Standard
ISBN
Pages
Published
Publisher	US Military Specs/Standards/Handbooks
Status	Superseded

MS33786 Revision B:2013	Fitting, Installation, Flared Tube and Hose, Swivel

SAE AMS 2486 : 2010	CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS 2488 : 2000	ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
ASME Y14.5 : 2009	DIMENSIONING AND TOLERANCING
MIL-DTL-16232 Revision G:2000	PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
SAE AS 4395 : 2013	FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 4134 : 2012	ALUMINUM ALLOY, DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T4), SOLUTION HEAT TREATED
SAE AMS QQ A 367 : 2012	ALUMINUM ALLOY FORGINGS
MIL-DTL-5541 Revision F:2006	Chemical Conversion Coatings on Aluminum and Aluminum Alloys
SAE AMS 2417 : 2013	PLATING, ZINC-NICKEL ALLOY
SAE AMS C 81562 : 1998	COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED)
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
SAE AS 4875 : 2016	FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION
SAE AMS 4124 : 2012	ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED

Product Format

Quantity

Buy now

Add to cart

Create account

Committee	FSC 4730
Document Type	Standard
ISBN
Pages
Published
Publisher	US Military Specs/Standards/Handbooks
Status	Superseded

MS33786 Revision B:2013	Fitting, Installation, Flared Tube and Hose, Swivel

SAE AMS 2486 : 2010	CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE
SAE AMS QQ P 416 : 2016	PLATING, CADMIUM (ELECTRODEPOSITED)
SAE AMS 2488 : 2000	ANODIC TREATMENT - TITANIUM AND TITANIUM ALLOYS SOLUTION PH 13 OR HIGHER
ASME Y14.5 : 2009	DIMENSIONING AND TOLERANCING
MIL-DTL-16232 Revision G:2000	PHOSPHATE COATING, HEAVY, MANGANESE OR ZINC BASE
SAE AS 4395 : 2013	FITTING END, FLARED, TUBE CONNECTION, DESIGN STANDARD
ASME B46.1 : 2009	SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
SAE AMS 4134 : 2012	ALUMINUM ALLOY, DIE FORGINGS, 4.4CU - 0.85SI - 0.80MN - 0.50MG (2014-T4), SOLUTION HEAT TREATED
SAE AMS QQ A 367 : 2012	ALUMINUM ALLOY FORGINGS
MIL-DTL-5541 Revision F:2006	Chemical Conversion Coatings on Aluminum and Aluminum Alloys
SAE AMS 2417 : 2013	PLATING, ZINC-NICKEL ALLOY
SAE AMS C 81562 : 1998	COATINGS, CADMIUM, TIN-CADMIUM AND ZINC (MECHANICALLY DEPOSITED)
MIL A 8625 : F	ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2700E : 2011	PASSIVATION OF CORROSION RESISTANT STEELS
SAE AS 4875 : 2016	FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION
SAE AMS 4124 : 2012	ALUMINUM ALLOY, ROLLED OR COLD FINISHED BARS, RODS, AND WIRE - 5.6ZN - 2.5MG - 1.6CU - 0.23CR (7075-T7351), SOLUTION HEAT TREATED, STRESS RELIEVED BY STRETCHING, AND OVERAGED