ONORM EN 508-3 : 2009
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
ONORM EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
ISO 9018:2015
|
Destructive tests on welds in metallic materials Tensile test on cruciform and lapped joints |
ONORM EN ISO 15480 : 2000
|
HEXAGON WASHER HEAD DRILLING SCREWS WITH TAPPING SCREW THREAD |
ISO 14555:2017
|
Welding — Arc stud welding of metallic materials |
ONORM EN ISO 2808 : 2007
|
PAINTS AND VARNISHES - DETERMINATION OF FILM THICKNESS |
ISO 14341:2010
|
Welding consumables Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels Classification |
ISO 14373:2015
|
Resistance welding — Procedure for spot welding of uncoated and coated low carbon steels |
ONORM EN ISO 5817 : 2014
|
WELDING - FUSION-WELDED JOINTS IN STEEL, NICKEL, TITANIUM AND THEIR ALLOYS (BEAM WELDING EXCLUDED) - QUALITY LEVELS FOR IMPERFECTIONS (ISO 5817:2014) |
ISO 7090:2000
|
Plain washers, chamfered Normal series Product grade A |
ISO 19840:2012
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Measurement of, and acceptance criteria for, the thickness of dry films on rough surfaces |
ONORM EN ISO 7091 : 2000
|
PLAIN WASHERS - NORMAL SERIES - PRODUCT GRADE C |
ISO 13918:2008
|
Welding Studs and ceramic ferrules for arc stud welding |
ISO 15480:1999
|
Hexagon washer head drilling screws with tapping screw thread |
ISO 1479:2011
|
Hexagon head tapping screws |
ISO 14343:2017
|
Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels — Classification |
ISO 15980:2002
|
Open end blind rivets with break pull mandrel and countersunk head — St/St |
ONORM EN 10025-4 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
ISO 13920:1996
|
Welding — General tolerances for welded constructions — Dimensions for lengths and angles — Shape and position |
ISO 10684:2004
|
Fasteners — Hot dip galvanized coatings |
ISO 4042:1999
|
Fasteners Electroplated coatings |
ISO 3506-1:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
ISO 15614-13:2012
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 13: Upset (resistance butt) and flash welding |
ISO 17633:2010
|
Welding consumables — Tubular cored electrodes and rods for gas shielded and non-gas shielded metal arc welding of stainless and heat-resisting steels — Classification |
ONORM EN 10058 : 2004
|
HOT ROLLED FLAT STEEL BARS FOR GENERAL PURPOSES - DIMENSIONS AND TOLERANCES ON SHAPE AND DIMENSIONS |
ISO 15614-11:2002
|
Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding |
ISO 15620:2000
|
Welding Friction welding of metallic materials |
ISO 15983:2002
|
Open end blind rivets with break pull mandrel and protruding head — A2/A2 |
ISO 10447:2015
|
Resistance welding — Testing of welds — Peel and chisel testing of resistance spot and projection welds |
ONORM EN 10244-2 : 2009
|
STEEL WIRE AND WIRE PRODUCTS - NON-FERROUS METALLIC COATINGS ON STEEL WIRE - PART 2: ZINC OR ZINC ALLOY COATINGS |
ISO 14713-1:2017
|
Zinc coatings — Guidelines and recommendations for the protection against corrosion of iron and steel in structures — Part 1: General principles of design and corrosion resistance |
ISO 15610:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on tested welding consumables |
ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
ISO 15979:2002
|
Open end blind rivets with break pull mandrel and protruding head — St/St |
ONORM EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
ONORM EN 10025-6 : 2010
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
ONORM EN ISO 14713-2 : 2010
|
ZINC COATINGS - GUIDELINES AND RECOMMENDATIONS FOR THE PROTECTION AGAINST CORROSION OF IRON AND STEEL IN STRUCTURES - PART 2: HOT DIP GALVANIZING |
ONORM EN 10139 : 2016
|
COLD ROLLED UNCOATED LOW CARBON STEEL NARROW STRIP FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
ONORM EN 10025-3 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
ISO 2560:2009
|
Welding consumables Covered electrodes for manual metal arc welding of non-alloy and fine grain steels Classification |
ONORM EN 1993-1-6 : 2017
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-6: STRENGTH AND STABILITY OF SHELL STRUCTURES |
ISO 15984:2002
|
Open end blind rivets with break pull mandrel and countersunk head — A2/A2 |
ISO 10509:2012
|
Hexagon flange head tapping screws |
ONORM EN 10219-2 : 2006
|
COLD FORMED WELDED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
ISO 14731:2006
|
Welding coordination Tasks and responsibilities |
ISO 7049:2011
|
Cross-recessed pan head tapping screws |
ISO 18276:2017
|
Welding consumables — Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels — Classification |
ISO 7976-2:1989
|
Tolerances for building — Methods of measurement of buildings and building products — Part 2: Position of measuring points |
ISO 1461:2009
|
Hot dip galvanized coatings on fabricated iron and steel articles — Specifications and test methods |
ONORM EN ISO 10447 : 2015
|
RESISTANCE WELDING - TESTING OF WELDS - PEEL AND CHISEL TESTING OF RESISTANCE SPOT AND PROJECTION WELDS (ISO 10447:2015) |
ISO 9013:2017
|
Thermal cutting — Classification of thermal cuts — Geometrical product specification and quality tolerances |
ONORM EN ISO 286-2 : 2014
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - ISO CODE SYSTEM FOR TOLERANCES ON LINEAR SIZES - PART 2: TABLES OF STANDARD TOLERANCE CLASSES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS (ISO 286-2:2010 + COR 1:2013) |
ONORM EN ISO 4042 : 1999
|
FASTENERS - ELECTROPLATED COATINGS |
ONORM EN ISO 17633 : 2011
|
WELDING CONSUMABLES - TUBULAR CORED ELECTRODES AND RODS FOR GAS SHIELDED AND NON-GAS SHIELDED METAL ARC WELDING OF STAINLESS AND HEAT-RESISTING STEELS - CLASSIFICATION |
ONORM EN ISO 15614-13 : 2012
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE TEST - PART 13: UPSET (RESISTANCE BUTT) AND FLASH WELDING (ISO 15614-13:2012) |
ISO 15612:2004
|
Specification and qualification of welding procedures for metallic materials Qualification by adoption of a standard welding procedure |
ISO 5817:2014
|
Welding — Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) — Quality levels for imperfections |
ONORM EN 14399-7 : 2008
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 7: SYSTEM HR - COUNTERSUNK HEAD BOLT AND NUT ASSEMBLIES |
ISO 9692-1:2013
|
Welding and allied processes — Types of joint preparation — Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels |
ISO 15614-1:2017
|
Specification and qualification of welding procedures for metallic materials — Welding procedure test — Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys |
ONORM EN 1011-3 : 2004
|
WELDING - RECOMMENDATIONS FOR WELDING OF METALLIC MATERIALS - PART 3: ARC WELDING OF STAINLESS STEELS |
ISO 15609-1:2004
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 1: Arc welding |
ONORM EN 10025-5 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
ONORM EN ISO 15609-1 : 2005
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - WELDING PROCEDURE SPECIFICATION - PART 1: ARC WELDING |
ONORM EN ISO 13920 : 1996
|
WELDING - GENERAL TOLERANCES FOR WELDED CONSTRUCTIONS - DIMENSIONS FOR LENGTHS AND ANGLES - SHAPE AND POSITION |
ISO 15611:2003
|
Specification and qualification of welding procedures for metallic materials — Qualification based on previous welding experience |
ISO 1481:2011
|
Slotted pan head tapping screws |
ONORM EN ISO 14341 : 2011
|
WELDING CONSUMABLES - WIRE ELECTRODES AND WELD DEPOSITS FOR GAS SHIELDED METAL ARC WELDING OF NON ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
ISO 14171:2016
|
Welding consumables Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels Classification |
ISO 16834:2012
|
Welding consumables — Wire electrodes, wires, rods and deposits for gas shielded arc welding of high strength steels — Classification |
ISO 7089:2000
|
Plain washers Normal series Product grade A |
ISO 16432:2006
|
Resistance welding Procedure for projection welding of uncoated and coated low carbon steels using embossed projection(s) |
ONORM EN ISO 15610 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BASED ON TESTED WELDING CONSUMABLES |
ISO 9445-2:2009
|
Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet |
ONORM EN ISO 4063 : 2011
|
WELDING AND ALLIED PROCESSES - NOMENCLATURE OF PROCESSES AND REFERENCE NUMBERS |
ISO 7091:2000
|
Plain washers Normal series Product grade C |
ISO 7092:2000
|
Plain washers Small series Product grade A |
ONORM EN ISO 1461 : 2009
|
HOT DIP GALVANIZED COATINGS ON FABRICATED IRON AND STEEL ARTICLES - SPECIFICATIONS AND TEST METHODS |
ISO 17632:2015
|
Welding consumables Tubular cored electrodes for gas shielded and non-gas shielded metal arc welding of non-alloy and fine grain steels Classification |
ONORM EN ISO 2560 : 2010
|
WELDING CONSUMABLES - COVERED ELECTRODES FOR MANUAL METAL ARC WELDING OF NON-ALLOY AND FINE GRAIN STEELS - CLASSIFICATION |
ONORM EN 15048-1 : AUG 2007
|
NON-PRELOADED STRUCTURAL BOLTING ASSEMBLIES - PART 1: GENERAL REQUIREMENTS |
ISO 4997:2015
|
Cold-reduced carbon steel sheet of structural quality |
ONORM EN ISO 15612 : 2004
|
SPECIFICATION AND QUALIFICATION OF WELDING PROCEDURES FOR METALLIC MATERIALS - QUALIFICATION BY ADOPTION OF A STANDARD WELDING PROCEDURE |
ISO 17637:2016
|
Non-destructive testing of welds Visual testing of fusion-welded joints |
ISO 286-2:2010
|
Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts |
ONORM EN ISO 15620 : 2000
|
WELDING - FRICTION WELDING OF METALLIC MATERIALS |
ISO 14175:2008
|
Welding consumables — Gases and gas mixtures for fusion welding and allied processes |
ISO 7976-1:1989
|
Tolerances for building — Methods of measurement of buildings and building products — Part 1: Methods and instruments |
ISO 15609-5:2011
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 5: Resistance welding |
ONORM EN 14399-8 : 2008
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 8: SYSTEM HV - HEXAGON FIT BOLT AND NUT ASSEMBLIES |
ISO 8503-1:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
ISO 6789:2003
|
Assembly tools for screws and nuts Hand torque tools Requirements and test methods for design conformance testing, quality conformance testing and recalibration procedure |
ISO 15976:2002
|
Closed end blind rivets with break pull mandrel and protruding head — St/St |
CEN/TR 10347:2006
|
Guidance for forming of structural steels in processing |
ISO 16433:2006
|
Resistance welding Procedure for seam welding of uncoated and coated low carbon steels |
ISO 9692-2:1998
|
Welding and allied processes — Joint preparation — Part 2: Submerged arc welding of steels |
ISO 7093-2:2000
|
Plain washers Large series Part 2: Product grade C |
ISO 15613:2004
|
Specification and qualification of welding procedures for metallic materials Qualification based on pre-production welding test |
ONORM EN 13411-4 : 2011
|
TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL AND RESIN SOCKETING |
ONORM EN 10056-1 : 2017
|
STRUCTURAL STEEL EQUAL AND UNEQUAL LEG ANGLES - PART 1: DIMENSIONS |
ISO 4063:2009
|
Welding and allied processes — Nomenclature of processes and reference numbers |
ISO 14713-2:2009
|
Zinc coatings Guidelines and recommendations for the protection against corrosion of iron and steel in structures Part 2: Hot dip galvanizing |
ONORM EN ISO 14731 : 2007
|
WELDING COORDINATION - TASKS AND RESPONSIBILITIES |
ISO 9445-1:2009
|
Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths |
ISO 3506-2:2009
|
Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
ISO 13916:2017
|
Welding — Measurement of preheating temperature, interpass temperature and preheat maintenance temperature |
ONORM EN 508-1 : 2014
|
ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF - SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
ONORM EN 10210-2 : 2006
|
HOT FINISHED STRUCTURAL HOLLOW SECTIONS OF NON-ALLOY AND FINE GRAIN STEELS - PART 2: TOLERANCES, DIMENSIONS AND SECTIONAL PROPERTIES |
ISO 2859-5:2005
|
Sampling procedures for inspection by attributes — Part 5: System of sequential sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
ISO 15609-4:2009
|
Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding |
ISO 636:2017
|
Welding consumables — Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels — Classification |
ONORM EN 10025-2 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
ONORM EN 14399-10 : JUN 2009
|
HIGH-STRENGTH STRUCTURAL BOLTING ASSEMBLIES FOR PRELOADING - PART 10: SYSTEM HRC - BOLT AND NUT ASSEMBLIES WITH CALIBRATED PRELOAD |
ONORM EN 10264-3 : 2012
|
STEEL WIRE AND WIRE PRODUCTS - STEEL WIRE FOR ROPES - PART 3: ROUND AND SHAPED NON ALLOYED STEEL WIRE FOR HIGH DUTY APPLICATIONS |
ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
ONORM EN 10164 : 2005
|
STEEL PRODUCTS WITH IMPROVED DEFORMATION PROPERTIES PERPENDICULAR TO THE SURFACE OF THE PRODUCT - TECHNICAL DELIVERY CONDITIONS |
ISO 1127:1992
|
Stainless steel tubes Dimensions, tolerances and conventional masses per unit length |
ISO 7093-1:2000
|
Plain washers Large series Part 1: Product grade A |