• There are no items in your cart

SAE AMS C 27725 : 2016

Current

Current

The latest, up-to-date edition.

COATING, CORROSION PREVENTATIVE, FOR AIRCRAFT INTEGRAL FUEL TANKS, FOR USE TO 250 DEGREES F (121 DEGREES C)

Available format(s)

Hardcopy , PDF

Language(s)

English

Published date

09-03-2016

1. SCOPE
2. APPLICABLE DOCUMENTS
3. TECHNICAL REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. PREPARATION FOR DELIVERY
6. ACKNOWLEDGMENT
7. REJECTIONS
8. NOTES

Sets up requirements for three types of corrosion preventative coatings for protection of aircraft integral fuel tanks.

Committee
AMS-G8
DevelopmentNote
Supersedes MIL C 27725 (B). (11/1999)
DocumentType
Revision
Pages
21
PublisherName
SAE International
Status
Current
Supersedes

SAE AMS S 83318 : 2016 SEALING COMPOUND, POLYSULFIDE TYPE, LOW TEMPERATURE CURING, QUICK REPAIR, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES
SAE AMS 3281 : 2016 SEALING COMPOUND, POLYSULFIDE (T) SYNTHETIC RUBBER FOR INTEGRAL FUEL TANK AND FUEL CELL CAVITIES LOW DENSITY FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
ASTM F 1385 : 2007 : R2012 Standard Practice for Platforms in Cargo Tanks
SAE AMS 3278 : 2016 SEALING AND COATING COMPOUND, POLYURETHANE (PUR), FUEL RESISTANT, HIGH TENSILE STRENGTH/ELONGATION, FOR INTEGRAL FUEL TANKS/FUEL CAVITIES/GENERAL PURPOSE
ASTM F 1385 : 2007 Standard Practice for Platforms in Cargo Tanks
SAE AMS 3167 : 2005 SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS
SAE AMS 3379 : 2013(R2018) SEALING COMPOUND, POLYSULFIDE RUBBER PREFORMED STRIPS FOR SEALING REMOVABLE DOORS, SKINS, AND PANELS
SAE AMS3278C:2022 Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant, High Tensile Strength/Elongation for Integral Fuel Tanks/Fuel Cavities/General Purpose
MIL-STD-1587 Revision D:2017 MATERIAL AND PROCESS REQUIREMENTS FOR AEROSPACE WEAPONS SYSTEMS
MIL-HDBK-510 Revision A:2014 AEROSPACE FUELS CERTIFICATION
SAE AMS 3276 : 2016 SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
SAE AMS 3102 : 2017 SEALING COMPOUND, POLYTHIOETHER RUBBER FAST CURING, LIGHT WEIGHT (SPECIFIC GRAVITY 0.78, MAX.) FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
SAE AS 5127 : 2013 AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS METHODS FOR PREPARING AEROSPACE SEALANT TEST SPECIMENS
SAE AMS 3100 : 2013 ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS
MIL-HDBK-510-1 Revision A:2010 AEROSPACE FUELS CERTIFICATION
SAE AMS 3265 : 2015 SEALING COMPOUND, POLYSULFIDE (T) RUBBER, FUEL RESISTANT, NON-CHROMATED CORROSION INHIBITING, FOR INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
MIL-DTL-18264 Revision E:2015 FINISHES, ORGANIC, WEAPONS SYSTEMS, APPLICATION AND CONTROL OF
SAE AMS 3376 : 2015 SEALING COMPOUND, NON-CURING, FLUOROSILICONE GROOVE INJECTION TEMPERATURE AND FUEL RESISTANT
MIL-STD-7179 Revision A:2009 Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment
SAE AS 5127/1 : 2014 AEROSPACE STANDARD TEST METHODS FOR AEROSPACE SEALANTS TWO-COMPONENT SYNTHETIC RUBBER COMPOUNDS
SAE AIR 5774 : 2012 COMPOSITE FUEL TANKS, FUEL SYSTEM DESIGN CONSIDERATIONS
SAE AMS S 8802 : 2015 SEALING COMPOUND, FUEL RESISTANT, INTEGRAL FUEL TANKS AND FUEL CELL CAVITIES
SAE AMS 3277 : 2015 SEALING COMPOUND, POLYTHIOETHER RUBBER, FAST CURING FOR INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
SAE AMS3379A:2013(S2023) Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels(STABILIZED Aug 2023)

ASTM D 1353 : 2013 : REDLINE Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products
ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
SAE AMS 1640 : 2011 CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES
SAE AMS 3276 : 2016 SEALING COMPOUND, INTEGRAL FUEL TANKS AND GENERAL PURPOSE, INTERMITTENT USE TO 360 DEGREES F (182 DEGREES C)
SAE AMS3819C : 2007 CLOTHS, CLEANING, FOR AIRCRAFT PRIMARY AND SECONDARY STRUCTURAL SURFACES
MIL-PRF-87937 Revision D:2001 CLEANING COMPOUND, AEROSPACE EQUIPMENT
SAE AMS 4045 : 2016 ALUMINUM ALLOY SHEET AND PLATE 5.6ZN - 2.5MG - 1.6CU - 0.23CR 7075: (-T6 SHEET, -T651 PLATE) SOLUTION AND PRECIPITATION HEAT TREATED
ASTM D 1200 : 2010 Standard Test Method for Viscosity by Ford Viscosity Cup
SAE AS 9100D : 2016 QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR AVIATION, SPACE AND DEFENSE ORGANIZATIONS
MIL-DTL-81706 Revision B:2004 Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys
MIL-DTL-5541 Revision F:2006 Chemical Conversion Coatings on Aluminum and Aluminum Alloys
ASTM D 1974 : 1998 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
MIL-PRF-23699 Revision G:2014 Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167
MIL A 8625 : F ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS
SAE AMS 2629 : 2017 FLUID, JET REFERENCE
MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
ASTM D 257 : 2014 : REDLINE Standard Test Methods for DC Resistance or Conductance of Insulating Materials
FED-STD-791 Revision D:2007 TESTING METHOD OF LUBRICANTS, LIQUID FUELS, AND RELATED PRODUCTS
MIL-PRF-85570 Revision E:2012 CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR
ASTM D 1475 : 2013 : REDLINE Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
ASTM D 3359 : 2017 : REDLINE Standard Test Methods for Rating Adhesion by Tape Test

€125.98
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.