|
MIL-PRF-7907 Revision C:2007
|
Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces) |
|
SAE AMS 3240 : 2011
|
CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 35-45 |
|
MIL-PRF-32239 Revision A:2014
|
COATING SYSTEM, ADVANCED PERFORMANCE, FOR AEROSPACE APPLICATIONS |
|
SAE AMS 3166 : 2014
|
SOLVENTS, CLEANING, CLEANING PRIOR TO APPLICATION OF SEALING COMPOUNDS |
|
SAE AS 4723 : 2012
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, KEY LOCKED, PLASTIC SELF LOCKING DEVICE, SOLID FILM LUBRICANT, PROCUREMENT SPECIFICATION FOR |
|
MIL-DTL-4339 Revision E:2009
|
CORROSION PREVENTIVE, SOLUBLE OIL FOR WATER INJECTION SYSTEMS (NATO CODE NUMBER C-630) |
|
MIL-PRF-32405 Base Document:2013
|
CLEANER, HAND WIPE, FOR AVIATION AND MISSILE SYSTEMS, METALLIC SUBSTRATES, LOW OR EXEMPT VOC |
|
MIL-PRF-81309 Revision G:2014
|
CORROSION PREVENTIVE COMPOUNDS, WATER DISPLACING, ULTRA-THIN FILM |
|
SAE AMS 1640 : 2011
|
CORROSION REMOVING COMPOUND, FOR AIRCRAFT SURFACES |
|
SAE AS 1241 : 2016
|
FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
|
SAE AS 4976 : 2012
|
Insert, Screw Thread, Non-Locking, UNS S66286, Locked in, Key Locked, Procurement Specification for(STABILIZED Mar 2019) |
|
SAE AMS 3144 : 2012
|
PRIMER, ANODIC ELECTRODEPOSITION FOR AIRCRAFT APPLICATIONS |
|
ASTM F 1110 : 2009
|
Standard Test Method for Sandwich Corrosion Test |
|
MIL-DTL-83513 Revision G:2008
|
Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
|
MIL-DTL-83454 Revision B:2016
|
TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
|
MS35759 Revision C:2008
|
CUPS, GREASE, AUTOMATIC FEED |
|
P-W-2891 Revision A:2002
|
WIPE SOLVENTS, EXEMPT AND NON-EXEMPT |
|
BS IEC 63004:2015
|
Standard for receiver fixture interface |
|
SAE AMS P 5510 : 2013
|
O-RING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, TYPE 1 HYDRAULIC (-65 TO 160 DEGREES F) |
|
MIL-PRF-85570 Revision E:2012
|
CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
|
MIL-DTL-81716 Revision A:2009
|
PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
|
MIL-PRF-23377 Revision K:2012
|
PRIMER COATINGS: EPOXY, HIGH-SOLIDS |
|
SAE AS 6449 : 2017
|
SOLID FILM LUBRICANT |
|
MIL-PRF-81705 Revision E:2009
|
Barrier Materials, Flexible, Electrostatic Discharge Protective, Heat-Sealable |
|
SAE AMS 3603 : 2002
|
PROTECTIVE FILM, HIGH PERFORMANCE, POLYMERIC PRESSURE SENSITIVE ADHESIVE, FOR AIRCRAFT EXTERIOR APPLICATIONS |
|
SAE AMS C 7438 : 2014
|
CORE MATERIAL, ALUMINUM, FOR SANDWICH CONSTRUCTION |
|
IEC 63004:2015
|
Standard for receiver fixture interface |
|
SAE AMS 3167 : 2005
|
SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
|
SAE AMS 3100 : 2013
|
ADHESION PROMOTER FOR POLYSULFIDE SEALING COMPOUNDS |
|
MIL-PRF-6864 Revision F:2010
|
CLEANING COMPOUND, SOLVENT, OIL COOLER |
|
SAE AS 4892 : 2012
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED, PROCUREMENT SPECIFICATION FOR |
|
MIL-PRF-85285 Revision E:2012
|
COATING: POLYURETHANE, AIRCRAFT AND SUPPORT EQUIPMENT |
|
MIL-PRF-32295 Revision B:2017
|
CLEANER, NON-AQUEOUS, LOW-VOC, HAP-FREE |
|
SAE AMS R 7362 : 2012
|
NITRILE RUBBER, SYNTHETIC, SOLID, SHEET, STRIP AND FABRICATED PARTS, SYNTHETIC OIL RESISTANT |
|
ASTM F 1110 : 2009 : R2014
|
Standard Test Method for Sandwich Corrosion Test |
|
MIL-STD-186 Revision F:2002
|
PROTECTIVE FINISHING SYSTEMS FOR ROCKETS, GUIDED MISSILES, SUPPORT EQUIPMENT AND RELATED MATERIALS |
|
SAE AMS 3604 : 2015
|
HEAT RESISTANT ALUMINIZED PAINT |
|
MIL-PRF-29602 Revision A:2005
|
CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET |
|
MIL-DTL-5516 Revision D:2008
|
Packing, Preformed, Petroleum Hydraulic Fluid Resistant, 160 Degrees F (71 Degrees C) |
|
MIL-PRF-32597 Base Document:2018
|
CLEANER, POLYMER AND POLYMER MATRIX COMPOSITE (PMC) MATERIAL, NON-AQUEOUS, HAP-FREE |
|
SAE AMS 3241 : 2011
|
CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 55-65 |
|
SAE AS 5887 : 2014
|
INSERT, SCREW THREAD, SELF-LOCKING, UNS S66286, LOCKED IN, KEY LOCKED PROCUREMENT SPECIFICATION FOR |
|
SAE AMS 3143 : 2016
|
POWDER COATING MATERIAL |
|
MIL-DTL-5521 Revision C:2007
|
Washer, Aircraft Hydraulic Packing Back-Up |
|
MIL-DTL-83488 Revision D:1999
|
COATING, ALUMINUM, HIGH PURITY |
|
MIL-PRF-85582 Revision E:2012
|
PRIMER COATINGS: EPOXY, WATERBORNE |
|
SAE AMS 3242 : 2011
|
CHLOROPRENE (CR) RUBBER, WEATHER RESISTANT, 75-85 |
|
MIL-PRF-32587 Base Document:2018
|
Remover, Paint, Hap-Free, Neutral |
|
MIL-DTL-85054 Revision D:2010
|
CORROSION PREVENTIVE COMPOUND, WATER-DISPLACING, TRANSPARENT (FORMERLY AMLGUARD) |
|
SAE AMS 3092 : 2015
|
RELEASE AGENT, FOR USE DURING FORM-IN-PLACE GASKET PREPARATION |