Skip to content
Please enter a keyword to search

  • SAE AS 1576 : 2016

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    FITTINGS, WELDED, HYDRAULIC, TITANIUM, CORROSION RESISTANT STEEL AND NICKEL, 3000 PSI HYDRAULIC

    Available format(s):  Hardcopy, PDF

    Superseded date:  07-04-2020

    Language(s):  English

    Published date:  01-01-2016

    Publisher:  SAE International

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. REFERENCES
    3. REQUIREMENTS
    4. QUALITY ASSURANCE PROVISIONS
    5. PREPARATION FOR DELIVERY
    6. NOTES
    APPENDIX A - NITRIC-HYDROFLUORIC ACID ETCH
                 OF TITANIUM ALLOYS

    Abstract - (Show below) - (Hide below)

    Describes the requirements for weld fittings and machine weldments using an orbiting welding head suitable for use on cold worked 3Al-2.5V titanium, 21Cr-6Ni-9Mn CRES, and 718 nickel alloy tubing.

    General Product Information - (Show below) - (Hide below)

    Committee G-3
    Document Type Revision
    Publisher SAE International
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AIR 5426 : 2013 FITTING AND FITTING ASSEMBLY SELECTION, INSTALLATION, INSPECTION AND MAINTENANCE OF
    SAE AS 85421 : 2015 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, BEAM SEAL, 3000/4000 PSI, GENERAL SPECIFICATION FOR
    SAE AS 18280/2 : 2006 SLEEVE, INTERNALLY OR EXTERNALLY SWAGED OR WELDED, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI
    SAE AIR 310 : 2013 FITTINGS, CATALOG OF FLARED. FLARELESS, PIPE THREADED, PORT, HOSE AND OTHER TYPE TUBE STANDARD CONNECTORS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    SAE AS 4695 : 2013 SLEEVE, TUBE END, ACORN TO WELD, SHORT FLARELESS
    SAE AMS5659S : 2016 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
    SAE AMS 5663 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION AND PRECIPITATION HEAT TREATED
    SAE AS 1583 : 2013 FITTING, TEE, INTEGRAL WELD RING, 3000 PSI
    SAE AS 5863 : 2013 FITTING END, 24° CONE, FLARELESS, FLUID CONNECTION, DESIGN STANDARD
    SAE AS 4696 : 2009 FITTING, SLEEVE, FLARELESS, NONREDUCER AND REDUCER, SHORT ACORN TO WELD TUBE END
    SAE AMS 5662 : 2016 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, BARS, FORGINGS, AND RINGS 52.5NI - 19CR - 3.0MO - 5.1CB (NB) - 0.90TI - 0.50AI - 18FE CONSUMABLE ELECTRODE OR VACUUM INDUCTION MELTED 1775 DEGREES F (968 DEGREES C) SOLUTION HEAT TREATED, PRECIPITATION-HARDENABLE
    SAE AS 603 : 2015 IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES
    NAS1760:2015 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR
    SAE AMS 5656F : 2015 STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED
    SAE AS 4693 : 2013 UNION, TUBE END, EXTERNAL THREAD TO WELD, SHORT FLARELESS
    SAE AMS 5561 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC
    SAE ARP 1185 : 2013 FLEXURE TESTING OF HYDRAULIC TUBING JOINTS AND FITTINGS
    SAE AMS 2759/3 : 2015 HEAT TREATMENT PRECIPITATION-HARDENING CORROSION-RESISTANT, MARAGING, AND SECONDARY HARDENING STEEL PARTS
    SAE AS 1582 : 2012 FITTING, ADAPTER, EXTERNAL THREAD FLARELESS TO INTEGRAL WELD RING 3000 PSI
    ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
    SAE AS 1585 : 2013 FITTING, REDUCER, INTEGRAL WELD RING, 3000 PSI
    SAE AS 1579 : 2014 FITTING END, INTEGRAL WELD, LIP, DESIGN STANDARD
    AWS A3.0 : 0 STANDARD WELDING TERMS AND DEFINITIONS - INCLUDING TERMS FOR ADHESIVE BONDING, BRAZING, SOLDERING, THERMAL CUTTING, AND THERMAL SPRAYING
    SAE AMS 4945 : 2014 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
    SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
    SAE AS 1577 : 2014 TUBE END, WELD DESIGN STANDARD
    SAE AS 18280 : 2010 FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI
    SAE AMS 5589 : 2013 NICKEL ALLOY, CORROSION AND HEAT RESISTANT, SEAMLESS TUBING 52.5NI - 19CR - 3.0MO - 5.1CB - 0.90TI - 0.50AL - 18FE CONSUMABLE ELECTRODE REMELTED OR VACUUM INDUCTION MELTED, 1775 DEGREES F (968 DEGREES C), SOLUTION HEAT TREATED
    SAE AS 5234 : 2010 NUT, COUPLING, FLARELESS
    SAE AS 1581 : 2012 FITTING, SLEEVE, FLARELESS ACORN TO INTEGRAL WELD RING, 3000 PSI
    SAE AMS 4946 : 2016 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC, 3AL - 2.5V, TEXTURE CONTROLLED, COLD WORKED, STRESS RELIEVED
    SAE AS 1584 : 2013 ELBOW 90°, TUBE WELD, 3000 PSI HYDRAULIC
    SAE AMS H 6875 : 2010 HEAT TREATMENT OF STEEL RAW MATERIALS
    SAE AS 1893 : 2013 RING, WELD, 3000 PSI, CRES
    SAE ARP 4784 : 2013 DEFINITIONS AND LIMITS, METAL MATERIAL DEFECTS AND SURFACE AND EDGE FEATURES, FLUID COUPLINGS, FITTINGS AND HOSE ENDS
    SAE AS 478 : 2015 IDENTIFICATION MARKING METHODS
    SAE AS 5233 : 2015 FITTING, ASSEMBLY, CAP, FLARELESS
    O-H-795 Base Document:1953 HYDROFLUORIC ACID, TECHNICAL
    SAE AMS T 6845 : 2013 TUBING, STEEL, CORROSION-RESISTANT (S30400), AEROSPACE VEHICLE HYDRAULIC SYSTEM 1/8 HARD CONDITION
    SAE AS 2094 : 2011(S2018) Test Methods for Tube-Fitting Assemblies(STABILIZED Jul 2018)
    SAE ARP 9013 : 2005 STATISTICAL PRODUCT ACCEPTANCE REQUIREMENTS
    SAE AS 1580 : 2013 RING, WELD, 3000 PSI, TITANIUM
    SAE AMS 4928 : 2016 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective