Skip to content
Please enter a keyword to search

  • SAE AS 4388 : 2013

    Current The latest, up-to-date edition.

    HOSE ASSEMBLY PTFE HEAVY DUTY, -65 TO 400 DEGREES F (-55 TO 204 DEGREES C) 8000 PSI (56000 KPA) HYDRAULIC AND PNEUMATIC

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  07-01-2013

    Publisher:  SAE International

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 SCOPE
    2 REFERENCES
    3 TECHNICAL REQUIREMENTS
    4 QUALITY ASSURANCE PROVISIONS
    5 PREPARATION FOR DELIVERY
    6 NOTES

    Abstract - (Show below) - (Hide below)

    Defines the requirements for polytetrafluoroethylene (PTFE) heavy duty hose assemblies suitable for use in aircraft and missile hydraulic fluid systems service to 8000 psi and -65 to 400 degree F.

    General Product Information - (Show below) - (Hide below)

    Committee G-3
    Document Type Standard
    Publisher SAE International
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AS 150 : 2017 HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE

    Standards Referencing This Book - (Show below) - (Hide below)

    SAE AMS5659S : 2016 Steel, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 15Cr - 4.5Ni - 0.30Cb (Nb) - 3.5Cu
    SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
    SAE ARP 1835 : 2013 PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
    MIL L 7808 : K (1) LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE
    SAE ARP 603 : 1985 IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES
    SAE AS 611F : 2010 HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
    ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    MIL-T-8606 Revision C:1973 TUBING, STEEL, CORROSION RESISTANT (18-8 STABILIZED AND EXTRA LOW CARBON)
    MIL-STD-130 Revision N:2007 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
    MIL-T-8808 Revision B:1981 TUBING, STEEL, CORROSION RESISTANT (18.8 STABILIZED) AIRCRAFT HYDRAULIC QUALITY
    SAE AMS 5571J:2012(R2018) STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
    SAE AMS 5643 : 2016 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 16CR - 4.0NI - 0.30CB (NB) - 4.0CU, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE
    SAE AMS 5743 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS AND FORGINGS 15.5CR - 4.5NI - 2.9MO - 0.10N SOLUTION HEAT TREATED, SUB-ZERO COOLED, EQUALIZED, AND OVER-TEMPERED
    DOD STD 100 : C NOTICE 6 ENGINEERING DRAWING PRACTICES
    SAE AMS 5561 : 2012 STEEL, CORROSION AND HEAT-RESISTANT, WELDED AND DRAWN OR SEAMLESS AND DRAWN TUBING, 9.0MN - 20CR - 6.5NI - 0.28N, HIGH-PRESSURE HYDRAULIC
    SAE AS 1055 : 2013 FIRE TESTING OF FLEXIBLE HOSE, TUBE ASSEMBLIES, COILS, FITTINGS AND SIMILAR SYSTEM COMPONENTS
    SAE AMS 5536 : 2012 NICKEL ALLOY, CORROSION AND HEAT-RESISTANT, SHEET, STRIP, AND PLATE, 47.5NI - 22CR - 1.5CO - 9.0MO - 0.60W - 18.5FE, SOLUTION HEAT TREATED
    ASTM D 792 : 2013 : REDLINE Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
    SAE ARP 1153 : 2014 METHOD FOR DETERMINING RELATIVE SPECIFIC GRAVITY POLYTETRAFLUOROETHYLENE TUBING
    SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
    SAE AMS 4965 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
    MIL-STD-831 Base Document:1963 TEST REPORTS, PREPARATION OF
    SAE AMS 5567 : 2015 STEEL, CORROSION RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 19CR - 10NI (304), SOLUTION HEAT TREATED
    SAE AIR 1228 : 2009 STANDARD IMPULSE MACHINE EQUIPMENT AND OPERATION
    SAE AMS 5637 : 2012 STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
    MIL-F-85720 Base Document:1985 FITTING, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM, SEAL, GENERAL SPECIFICATION FOR
    MIL H 83282 : C HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537
    SAE AMS 4945 : 2014 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED
    SAE AMS 5575 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, WELDED TUBING, 18CR - 10.5NI - 0.70CB (NB) (347), SOLUTION HEAT TREATED
    MIL-S-8879 Revision C:1991 SCREW THREADS, CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER, GENERAL SPECIFICATION FOR
    ASTM D 1457 : 1992 Specification for Polytetrafluorethylene (PTFE) Molding and Extrusion Materials (Withdrawn 1996)
    SAE AMS 5570 : 2013 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS TUBING 18CR - 11NI - 0.40TI (321), SOLUTION HEAT TREATED
    QQ-S-763 Revision F:1996 STEEL BARS, WIRE, SHAPES AND FORGINGS; CORROSION RESISTANT
    SAE AMS 3380E : 2012 HOSE, POLYTETRAFLUOROETHYLENE TFE FLUOROCARBON RESIN, WIRE BRAID REINFORCED
    SAE AS 2078 : 2015 TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE)
    SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
    MIL F 8815 : D FILTER AND FILTER ELEMENTS, FLUID PRESSURE, HYDRAULIC LINE, 15 MICRON ABSOLUTE AND 5 MICRON ABSOLUTE, TYPE 11 SYSTEMS; GENERAL SPECIFICATION FOR
    MIL H 5606 : G HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE
    SAE AMS 4944 : 2015 TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED
    MIL-F-85720-1 Base Document:1985 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END
    SAE AMS5644E:1964(S2017) STEEL, BARS AND FORGINGS, CORROSION RESISTANT, 17CR - 7NI - 1AL
    MIL-STD-105 Revision E:1989 SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES
    SAE AMS 5576 : 2005 STEEL, CORROSION AND HEAT RESISTANT, WELDED TUBING - 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED
    SAE AMS 5556 : 2016 STEEL, CORROSION AND HEAT-RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING 18CR - 11NI - 0.70CB (347) SOLUTION HEAT TREATED
    SAE AMS 4928 : 2016 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
    SAE AMS 5557 : 2012 STEEL, CORROSION AND HEAT RESISTANT, SEAMLESS OR WELDED HYDRAULIC TUBING, 18.5CR - 10.5NI - 0.40TI (SAE 30321), SOLUTION HEAT TREATED
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective