Skip to content
Please enter a keyword to search

  • SAE AS 5951 : 2017

    Current The latest, up-to-date edition.

    HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA-ARAMID REINFORCED, 5080 PSI (35,000 KPA), 275 DEGREES F (135 DEGREES C), AIRCRAFT HYDRAULIC SYSTEMS

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  22-02-2017

    Publisher:  SAE International

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 SCOPE
    2 REFERENCES
    3 TECHNICAL REQUIREMENTS
    4 QUALITY ASSURANCE PROVISIONS
    5 PREPARATION FOR DELIVERY
    6 NOTES

    Abstract - (Show below) - (Hide below)

    Describes the requirements for polytetrafluoroethylene (PTFE) lined, para-aramid reinforced, hose assemblies suitable for use in 275 degrees F (135 degrees C), 5080 psi (35,000 kPa) aircraft hydraulic systems.

    General Product Information - (Show below) - (Hide below)

    Committee G-3
    Development Note Supplement 1 is available separately, see SAE AS 5951 SUP1. (09/2012)
    Document Type Revision
    Publisher SAE International
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    SAE AS 150 : 2017 HOSE ASSEMBLY, TYPE CLASSIFICATIONS OF, BASIC PERFORMANCE AND FIRE RESISTANCE
    SAE ARP 4752 : 2013 AEROSPACE - DESIGN AND INSTALLATION OF COMMERCIAL TRANSPORT AIRCRAFT HYDRAULIC SYSTEMS

    Standards Referencing This Book - (Show below) - (Hide below)

    SAE AMS 2486 : 2010 CONVERSION COATING OF TITANIUM ALLOYS FLUORIDE-PHOSPHATE TYPE
    SAE AS 5955 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 DEGREES F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45 DEGREES TO 45 DEGREES
    SAE AMS 5645 : 2016 STEEL, CORROSION AND HEAT RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 10NI - 0.40TI (321), SOLUTION HEAT TREATED
    SAE ARP 1835 : 2013 PREPARATION FOR DELIVERY, GENERAL REQUIREMENTS FOR HOSE ASSEMBLIES
    SAE ARP 603 : 1985 IMPULSE TESTING OF HYDRAULIC HOSE, TUBING, AND FITTING ASSEMBLIES
    SAE AS 611F : 2010 HOSE ASSEMBLY AND TUBING, POLYTETRAFLUOROETHYLENE, CLEANING METHODS FOR
    ASTM A 262 : 2015 : REDLINE Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
    SAE AS 6013 : 2009 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 DEGREES F, 4000 MAX PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT
    ASTM B 348 : 2013 : REDLINE Standard Specification for Titanium and Titanium Alloy Bars and Billets
    NAS1760:2015 FITTING END, FLARELESS ACORN, STANDARD DIMENSIONS FOR
    MIL-PRF-5606 Revision H:2002 HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE
    SAE AMS 5656F : 2015 STEEL, CORROSION RESISTANT, BARS, WIRE, FORGINGS, EXTRUSIONS, AND RINGS, 9.0MN - 20CR - 6.5NI - 0.27N, SOLUTION HEAT TREATED
    SAE AS 85720 : 2015 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE BEAM SEAL, 5000/8000 PSI, GENERAL SPECIFICATION FOR
    MIL-HDBK-831 Revision A:2013 PREPARATION OF TEST REPORTS
    SAE AS 1073B : 2013(S2019) SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE
    SAE ARP 4266 : 2014 HOLE CONTOUR, FLUID PASSAGE, TUBE FITTING
    ASME B46.1 : 2009 SURFACE TEXTURE (SURFACE ROUGHNESS, WAVINESS, AND LAY)
    SAE AMS 5647 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 9.5NI, SOLUTION HEAT TREATED
    MIL-PRF-680 Revision C:2010 DEGREASING SOLVENT
    SAE ARP 908 : 2013 TORQUE REQUIREMENTS, INSTALLATION AND QUALIFICATION TEST, HOSE AND TUBE FITTING
    SAE AMS 4965 : 2014 TITANIUM ALLOY, BARS, WIRE, FORGINGS, AND RINGS, 6.0AL 4.0V, SOLUTION HEAT TREATED AND AGED
    SAE AMS QQ P 35 : 1998 PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL
    MIL-PRF-87257 Revision C:2017 HYDRAULIC FLUID, FIRE RESISTANT, LOW TEMPERATURE, SYNTHETIC HYDROCARBON BASE, AIRCRAFT AND MISSILE
    SAE AS 7003 : 2008 NADCAP PROGRAM REQUIREMENTS
    SAE AS 7112 : 1997 NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FLUID SYSTEM COMPONENTS
    SAE AS 5272 : 2016 LUBRICANT, SOLID FILM, HEAT CURED, CORROSION INHIBITING, PROCUREMENT SPECIFICATION
    SAE AIR 1228 : 2009 STANDARD IMPULSE MACHINE EQUIPMENT AND OPERATION
    SAE AMS 5637 : 2012 STEEL, CORROSION RESISTANT, BARS AND WIRE 18CR - 9.0NI (SAE 30302) SOLUTION HEAT TREATED, COLD DRAWN AND STRESS RELIEVED 125 KSI (862 MPA) TENSILE STRENGTH
    SAE AMS 5646 : 2014 STEEL, CORROSION AND HEAT-RESISTANT, BARS, WIRE, FORGINGS, TUBING, AND RINGS, 18CR - 11NI - 0.60CB(NB) (347), SOLUTION HEAT TREATED
    SAE AS 8879 : 2004 SCREW THREADS - UNJ PROFILE, INCH CONTROLLED RADIUS ROOT WITH INCREASED MINOR DIAMETER
    SAE AS 85720 1 : 1998 FITTINGS, TUBE, FLUID SYSTEMS, SEPARABLE, HIGH PRESSURE, DYNAMIC BEAM SEAL, DESIGN STANDARD FOR MALE END
    SAE AS 2078 : 2015 TEST METHODS, HOSE ASSEMBLIES, POLYTETRAFLUOROETHYLENE (PTFE)
    SAE AS 1241 : 2016 FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT
    SAE AMS 2700E : 2011 PASSIVATION OF CORROSION RESISTANT STEELS
    MIL-PRF-83282 Revision D:1997 HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, METRIC, NATO CODE NUMBER H-537
    SAE AS 5952 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 DEGREE F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO STRAIGHT
    SAE AMS 2487 : 2000 ANODIC TREATMENT OF TITANIUM AND TITANIUM ALLOYS SOLUTION PH 12.4 MAXIMUM
    SAE AS 4458 : 2015 FITTING END, FLARELESS BLUNT NOSE, DESIGN STANDARD
    SAE AMS 5639 : 2017 STEEL, CORROSION-RESISTANT, BARS, WIRE, FORGINGS, MECHANICAL TUBING, AND RINGS, 19CR - 10NI, SOLUTION HEAT TREATED
    SAE AS 5953 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 °F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 45°
    SAE AS 5954 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 DEGREES F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, STRAIGHT TO 90 DEGREES
    SAE AS 5827 : 2015 FITTING END, FLARELESS, EXTRA FINE THREAD, DESIGN STANDARD
    SAE AS 5685 : 2015 STEEL, CORROSION RESISTANT, SAFETY WIRE, 18CR-11.5NI (UNS S30500), SOLUTION HEAT TREATED, COLD FINISHED
    SAE AS 478 : 2015 IDENTIFICATION MARKING METHODS
    ASME Y14.100 : 2017 ENGINEERING DRAWING PRACTICES - ENGINEERING DRAWING AND RELATED DOCUMENTATION PRACTICES
    SAE AS 5956 : 2013 HOSE ASSEMBLY, POLYTETRAFLUOROETHYLENE, PARA ARAMID REINFORCED, 275 DEGREES F, 5080 PSI, FLARELESS, TITANIUM FITTINGS, 45 DEGREES TO 90 DEGREES
    SAE AMS 4928 : 2016 TITANIUM ALLOY BARS, WIRE, FORGINGS, RINGS, AND DRAWN SHAPES, 6AL - 4V, ANNEALED
    NAS847:2012 CAPS AND PLUGS, PROTECTIVE, DUST AND MOISTURE SEAL
    SAE AS 4207 : 2015 FITTING END, EXTERNAL THREAD, BEAM SEAL, DESIGN STANDARD
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective