SAE J 518/1 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
HYDRAULIC FLANGED TUBE, PIPE, AND HOSE CONNECTIONS, 4-SCREW FLANGE CONNECTION - PART 1: 3.5 MPA TO 35 MPA (CODE 61)
09-03-2023
01-01-2013
FOREWORD
1. SCOPE
2. REFERENCES
3. SIZE DESIGNATION
4. DIMENSIONS AND TOLERANCES
5. MATERIAL
6. CORROSION PROTECTION
7. WORKMANSHIP
8. PRESSURE/TEMPERATURE REQUIREMENTS
9. MARKING
10. INSTALLATION
11. ORDERING INFORMATION
12. NOTES
Specifies general and dimensional specifications for the Code 61 metric (type 1) and inch (type 2) flanged heads, flange clamps (FC & FCM), and split flange clamps (FCS & FCSM) applicable to four-screw flange type tube, pipe, and hose connections.
DevelopmentNote |
Supersedes SAE J 518. (01/2013)
|
DocumentType |
Standard
|
PublisherName |
SAE International
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
SAE J 846 : 2015 | CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS |
SAE J 518/3 : 2015 | HYDRAULIC FLANGE CLAMPS, 2-SCREW FLANGE CONNECTION TO BE USED WITH SAE J518-1, (CODE 61) CONNECTIONS WHERE ONLY LOW PRESSURE IS REQUIRED |
ISO 19859:2016 | Gas turbine applications Requirements for power generation |
SAE J 2551/3 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT |
SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
SAE J 2551/2 : 2013 | RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS |
SAE J 2614 : 2018 | WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING |
SAE J 517 : 2016 | HYDRAULIC HOSE |
SAE J 846 : 2015 | CODING SYSTEMS FOR IDENTIFICATION OF FLUID CONDUCTORS AND CONNECTORS |
ISO 68-2:1998 | ISO general purpose screw threads — Basic profile — Part 2: Inch screw threads |
ISO 5598:2008 | Fluid power systems and components Vocabulary |
SAE J 516 : 2016 | HYDRAULIC HOSE FITTINGS |
SAE J 429 : 2014 | MECHANICAL AND MATERIAL REQUIREMENTS FOR EXTERNALLY THREADED FASTENERS |
ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
ISO 4017:2014 | Fasteners Hexagon head screws Product grades A and B |
ISO 225:2010 | Fasteners Bolts, screws, studs and nuts Symbols and descriptions of dimensions |
ISO 6162-2:2012 | Hydraulic fluid power Flange connections with split or one-piece flange clamps and metric or inch screws Part 2: Flange connectors, ports and mounting surfaces for use at a pressure of 42 MPa (420 bar), DN 13 to DN 76 |
ISO 4762:2004 | Hexagon socket head cap screws |
SAE J 2593 : 2015 | INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS |
ISO 1302:2002 | Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
SAE J 515 : 2015 | SPECIFICATION FOR O-RING MATERIALS USED WITH HYDRAULIC CONNECTORS |
ISO 7089:2000 | Plain washers Normal series Product grade A |
ISO 68-1:1998 | ISO general purpose screw threads — Basic profile — Part 1: Metric screw threads |
ISO 6162-1:2012 | Hydraulic fluid power — Flange connections with split or one-piece flange clamps and metric or inch screws — Part 1: Flange connectors, ports and mounting surfaces for use at pressures of 3,5 MPa (35 bar) to 35 MPa (350 bar), DN 13 to DN 127 |
ISO 19879:2010 | Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections |
ISO 725:2009 | ISO inch screw threads Basic dimensions |
ASME B18.3 : 2012 | SOCKET CAP, SHOULDER, SET SCREWS, AND HEX KEYS (INCH SERIES) |
ISO 273:1979 | Fasteners — Clearance holes for bolts and screws |
ISO 9227:2017 | Corrosion tests in artificial atmospheres — Salt spray tests |
ISO 261:1998 | ISO general purpose metric screw threads — General plan |
ISO 10763:1994 | Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures |
ISO 3601-1:2012 | Fluid power systems — O-rings — Part 1: Inside diameters, cross-sections, tolerances and designation codes |
ASTM A 574 : 2017 : REDLINE | Standard Specification for Alloy Steel Socket-Head Cap Screws |
ISO 3601-3:2005 | Fluid power systems O-rings Part 3: Quality acceptance criteria |
ISO 48:2010 | Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.