Skip to content
Please enter a keyword to search

  • SAE J 533 : 2017

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    FLARES FOR TUBING

    Available format(s):  Hardcopy, PDF

    Superseded date:  29-05-2020

    Language(s):  English

    Published date:  08-02-2017

    Publisher:  SAE International

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1. SCOPE
    2. REFERENCES
    3. GENERAL SPECIFICATIONS
    4. PERFORMANCE REQUIREMENT
    5. NOTES

    Abstract - (Show below) - (Hide below)

    Describes specifications and performance requirements for 37 degrees and 45 degrees single and double flares for tube ends intended for use with SAE J512, SAE J513, SAE J514, and ISO 8434-2 connectors.

    General Product Information - (Show below) - (Hide below)

    Document Type Revision
    Publisher SAE International
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ANSI B93.11M : 1981 SEAMLESS LOW CARBON STEEL HYDRAULIC LINE TUBING,
    ASTM A 254/A254M : 2012 : REDLINE Standard Specification for Copper-Brazed Steel Tubing
    SAE J 2593 : 2015 INFORMATION REPORT FOR THE INSTALLATION OF FLUID CONDUCTORS AND CONNECTORS
    NFPA 1192 : 2018 RECREATIONAL VEHICLES
    NFPA 54 : 2018 NATIONAL FUEL GAS CODE
    ANSI Z223.1 : 2018 NATIONAL FUEL GAS CODE
    SAE J 1650 : 2011 SEAMLESS COPPER-NICKEL 90-10 TUBING
    ASTM A 254 : 1997 : R2007 Standard Specification for Copper-Brazed Steel Tubing
    SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
    SAE J 514 : 2012 HYDRAULIC TUBE FITTINGS
    SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
    NFPA 501C : 1996 RECREATIONAL VEHICLES
    ASTM A 254 : 1997 : R2002 Standard Specification for Copper-Brazed Steel Tubing
    SAE J 2467 : 2015 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
    SAE J 1290 : 2012 AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS
    ASTM B 469 : 1994 Standard Specification for Seamless Copper-Alloy Tubes for Pressure Applications (Withdrawn 2000)
    SAE J 527 : 2017 BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING
    SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
    SAE J 2435 : 2015 WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING
    SAE J 2467 : 2020 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
    I.S. 808:2002 SPECIFICATION FOR CNG FUELLED VEHICLES
    ASTM A 254 : 1997 Standard Specification for Copper-Brazed Steel Tubing
    SAE J 356 : 2013 WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
    SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
    SAE J 2551 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON AND ALLOY STEEL TUBING APPLICATIONS
    SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
    SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
    SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
    SAE J512 : 1997(R2017) AUTOMOTIVE TUBE FITTINGS
    SAE J 513 : 1999 REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS
    SAE J 2613 : 2017 WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING
    SAE J 2614 : 2018 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
    SAE AS 4775 : 2017 AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS
    SAE J 526 : 2016 WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING
    SAE ARP 1247 : 2018 AIRCRAFT GROUND SUPPORT EQUIPMENT - GENERAL REQUIREMENTS

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO 5598:2008 Fluid power systems and components Vocabulary
    ASME Y14.5 : 2009 DIMENSIONING AND TOLERANCING
    ISO 4399:1995 Fluid power systems and components Connectors and associated components Nominal pressures
    SAE J 2879 : 2011 AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC HYDRAULIC TUBE CONNECTIONS FOR INVERTED FLARES
    ISO 10583:1993 Aerospace fluid systems — Test methods for tube/fitting assemblies
    ISO 6605:2017 Hydraulic fluid power — Test methods for hoses and hose assemblies
    ISO 4397:2011 Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
    SAE J 1290 : 2012 AUTOMOTIVE HYDRAULIC BRAKE SYSTEM - METRIC TUBE CONNECTIONS
    SAE J 2551/1 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 1: DESIGN AND FABRICATION
    SAE J 513 : 1999 REFRIGERATION TUBE FITTINGS - GENERAL SPECIFICATIONS
    SAE J 1273 : 2014 RECOMMENDED PRACTICES FOR HYDRAULIC HOSE ASSEMBLIES
    SAE J 1065 : 2016 NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING
    SAE J 356 : 2013 WELDED FLASH-CONTROLLED LOW-CARBON STEEL TUBING NORMALIZED FOR BENDING, DOUBLE FLARING, AND BEADING
    ISO 8434-2:2007 Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
    SAE J 2614 : 2009 WELDED AND COLD-DRAWN, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, FLARING, COLD FORMING, WELDING AND BRAZING
    ISO 19879:2010 Metallic tube connections for fluid power and general use Test methods for hydraulic fluid power connections
    SAE J 2435 : 2015 WELDED FLASH CONTROLLED, SAE 1021 CARBON STEEL TUBING, NORMALIZED FOR COLD FORMING, WELDING AND BRAZING
    SAE J 514 : 2012 HYDRAULIC TUBE FITTINGS
    SAE J 526 : 2016 WELDED LOW-CARBON STEEL TUBING SUITABLE FOR BENDING, FLARING, BEADING, FORMING AND BRAZING
    SAE J 527 : 2013 BRAZED DOUBLE WALL LOW-CARBON STEEL TUBING
    SAE J 525 : 2016 WELDED AND COLD DRAWN LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
    SAE J 1677 : 2016 TESTS AND PROCEDURES FOR CARBON STEEL AND HIGH STRENGTH LOW ALLOY STEEL TUBING
    SAE J 524 : 2016 SEAMLESS LOW-CARBON STEEL TUBING ANNEALED FOR BENDING AND FLARING
    ISO 10763:1994 Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures
    SAE J 2467 : 2015 WELDED AND COLD-DRAWN, SAE 1021 CARBON STEEL TUBING NORMALIZED FOR BENDING AND FLARING
    SAE J 1176 : 2012 EXTERNAL LEAKAGE CLASSIFICATIONS FOR HYDRAULIC SYSTEMS
    SAE TSB 003 : 1999 RULES FOR SAE USE OF SI (METRIC) UNITS
    SAE J 2551/2 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 2: GENERAL SPECIFICATIONS AND PERFORMANCE REQUIREMENTS
    ISO 2944:2000 Fluid power systems and components — Nominal pressures
    SAE J 2551/3 : 2013 RECOMMENDED PRACTICES FOR FLUID CONDUCTOR CARBON, ALLOY AND HIGH STRENGTH LOW ALLOY STEEL TUBING APPLICATIONS - PART 3: PROCUREMENT
    ISO 13486-1:1999 Road vehicles Hydraulic braking systems Part 1: Double-flare pipes, tapped holes, male fittings and tube seats
    SAE J512 : 1997 AUTOMOTIVE TUBE FITTINGS
    SAE J 2613 : 2009 WELDED FLASH CONTROLLED, HIGH STRENGTH (500 MPA TENSILE STRENGTH) HYDRAULIC TUBING, FOR BENDING, DOUBLE FLARING, COLD FORMING, WELDING, AND BRAZING
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective