SAE MA 2150 : 2015
Current
Current
The latest, up-to-date edition.
CLAMPS, LOOP OR P STYLE, SINGLE POINT MOUNT, MULTIPLE SHAPES, METRIC
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
21-08-2015
Publisher
1 SCOPE
2 REFERENCES
3 TECHNICAL REQUIREMENTS
4 QUALITY ASSURANCE PROVISIONS
5 PACKAGING
6 NOTES
Describes the requirements for metric loop or 'P' style clamps used for systems installation in aerospace equipment.
| Committee |
G 3
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
SAE International
|
| Status |
Current
|
| Supersedes |
| MIL L 7808 : K (1) | LUBRICATING OIL, AIRCRAFT TURBINE ENGINE, SYNTHETIC BASE |
| MIL-STD-129 Revision R:2014 | Military Marking for Shipment and Storage |
| SAE MA 2150/2 : 1991 | CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, METRIC |
| PPP-B-665 Revision D:1972 | BOXES, PAPERBOARD, METAL EDGED AND COMPONENTS |
| SAE MA 2156/3 : 2015 | CLAMP, CENTER MOUNT, CUSHIONED, HIGH TEMPERATURE, METRIC |
| QQ-P-35 Revision C:1988 | PASSIVATION TREATMENTS FOR CORROSION-RESISTANT STEEL |
| SAE MA 2150/5 : 1991 | CLAMP, LOOP STYLE, WITH INSERT, HYDROCARBON FLUID RESISTANT, METRIC |
| SAE ARP 1897 : 2013 | CLAMP SELECTION AND INSTALLATION GUIDE |
| PPP-B-636 Revision J:1981 | BOX, SHIPPING, FIBERBOARD |
| SAE MA 2155/3 : 2015 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, ALUMINUM, METRIC |
| ASTM D 1149 : 2016-02 | TEST METHODS FOR RUBBER DETERIORATION - CRACKING IN AN OZONE CONTROLLED ENVIRONMENT |
| MIL-H-6875 Revision H:1989 | HEAT TREATMENT OF STEEL RAW MATERIALS |
| PPP-B-566 Revision E:1974 | BOX, FOLDING, PAPERBOARD |
| SAE MA 2150/7 : 1991 | CLAMP, LOOP STYLE, WITH INSERT, HIGH TEMPERATURE, METRIC |
| SAE MA 2155/4 : 2015 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, PHOSPHATE ESTER FLUID RESISTANT, STAINLESS STEEL, METRIC |
| SAE MA 2153/2 : 2015 | CLAMP, LOOP TYPE, BARE METAL, STAINLESS STEEL, METRIC |
| SAE MA 2152/2 : 2015 | CLAMP, CENTER MOUNT, BARE METAL, STAINLESS STEEL, METRIC |
| MIL T 5624 : R | TURBINE FUEL, AVIATION, GRADES JP 4 AND JP 5 |
| SAE MA 2155/2 : 2015 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, STAINLESS STEEL, METRIC |
| PPP-B-576 Revision C:1993 | BOX, WOOD-CLEATED PANELBOARD |
| SAE MA 2150/6 : 1991 | CLAMP, LOOP STYLE, WITH INSERT, PHOSPHATE ESTER FLUID RESISTANT, METRIC |
| SAE MA 2156/2 : 2015 | CLAMP, CENTER MOUNT, CUSHIONED, PHOSPHATE ESTER FLUID RESISTANT, METRIC |
| MIL-STD-831 Base Document:1963 | TEST REPORTS, PREPARATION OF |
| SAE MA 2155/5 : 2015 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, HIGH TEMPERATURE, STAINLESS STEEL, METRIC |
| SAE AMS 5510S : 2014 | STEEL, CORROSION AND HEAT-RESISTANT, SHEET, STRIP AND PLATE, 18CR - 10.5NI - 0.40TI (SAE 30321) SOLUTION HEAT TREATED |
| SAE ARP 1527 : 2014 | COLOR CODING - ELASTOMERS FOR TUBE CLAMP CUSHIONS |
| PPP-B-676 Revision E:1992 | BOXES SET-UP |
| MIL H 83282 : C | HYDRAULIC FLUID, FIRE RESISTANT, SYNTHETIC HYDROCARBON BASE, AIRCRAFT, METRIC, NATO CODE NUMBER H 537 |
| PPP-B-591 Revision B:1971 | BOXES, SHIPPING, FIBERBOARD, WOOD-CLEATED |
| SAE AMS 4945 : 2014 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3AL - 2.5V, CONTROLLED CONTRACTILE STRAIN RATIO COLD WORKED, STRESS RELIEVED |
| ASTM D 3182 : 2016 : REDLINE | Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets |
| SAE MA 2153/1 : 2015 | CLAMP, LOOP TYPE, BARE METAL, ALUMINUM, METRIC |
| MIL-STD-100 Revision G:1997 | ENGINEERING DRAWINGS |
| MIL-P-116 Revision J:1988 | PRESERVATION, METHODS OF |
| PPP-B-601 Revision H:1989 | BOXES, WOOD, CLEATED PLYWOOD |
| SAE MA 2150/1 : 1991 | CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, METRIC |
| SAE AMS 5528 : 2012 | STEEL, CORROSION-RESISTANT, SHEET, STRIP, AND PLATE, 17CR - 7.1NI - 1.1AL, SOLUTION HEAT TREATED, PRECIPITATION HARDENABLE |
| SAE MA 2150/3 : 1991 | CLAMP, LOOP STYLE, CUSHIONED, WITH WEDGE, HIGH TEMPERATURE, METRIC |
| MIL-H-6088 Revision G:1991 | HEAT TREATMENT OF ALUMINIUM ALLOYS |
| MIL H 5606 : G | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT; MISSILE AND ORDNANCE |
| SAE MA 2156/1 : 2015 | CLAMP, CENTER MOUNT, CUSHIONED, HYDROCARBON FLUID RESISTANT, METRIC |
| SAE AMS 4944 : 2015 | TITANIUM ALLOY TUBING, SEAMLESS, HYDRAULIC 3.0AL - 2.5V COLD WORKED, STRESS RELIEVED |
| A-A-711 Base Document:1980 | DRY CLEANING SOLVENT |
| SAE MA 2155/1 : 2015 | CLAMP, RECTANGULAR LOOP, CUSHIONED, WITH WEDGE, HYDROCARBON FLUID RESISTANT, ALUMINUM, METRIC |
| PPP-B-621 Revision D:1981 | BOXES, WOOD, NAILED AND LOCK CORNER |
| SAE AS 478 : 2015 | IDENTIFICATION MARKING METHODS |
| SAE MA 2152/1 : 2015 | CLAMP, CENTER MOUNT, BARE METAL, ALUMINUM, METRIC |
| ASTM D 471 : 2016-02 | TEST METHOD FOR RUBBER PROPERTY - EFFECT OF LIQUIDS |
| MIL-STD-105 Revision E:1989 | SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES |
| SAE MA 2150/4 : 1991 | CLAMP SUPPORT, LOOP CLAMP, METRIC |
| PPP-B-640 Revision D:1966 | BOX, FIBERBOARD, CORRUGATED, TRIPLE-WALL |
| PPP-B-585 Revision D:1992 | BOX, WOOD, WIREBOUND |
Important note : Users cannot be edited or removed once added to your Multi user PDF.Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.