Skip to content
Please enter a keyword to search

  • UL 1439:5ED 2015-04

    Current The latest, up-to-date edition.

    Tests for Sharpness of Edges on Equipment

    Available format(s):  Hardcopy

    Language(s): 

    Published date:  21-04-2015

    Publisher:  Underwriters Laboratories

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Units of measurement
    3 References
    4 General
    Tests
    5 Apparatus
    6 Calibration of tester
    7 Test procedure
    8 Criteria
    9 Report

    Abstract - (Show below) - (Hide below)

    This revision of ANSI/UL 1439 dated May 4, 2021 includes the following changes in requirements: • Removed reference to 3M Company Type 4432 tape; Table 5.1 • Revised test procedure in 7.2

    Scope - (Show below) - (Hide below)

    These requirements cover a test procedure to be used to determine the potential personal injury related to the sharpness of edges that are part of or associated with appliances and equipment.

    General Product Information - (Show below) - (Hide below)

    Development Note NEW CHILD REV 2 2021 IS NOW ADDED.
    Document Type Standard
    Product Note NEW CHILD REV 2 2021 IS NOW ADDED.
    Publisher Underwriters Laboratories
    Status Current

    Standards Referenced By This Book - (Show below) - (Hide below)

    CSA C22.2 No. 1335.1 : 1993 : R2013 PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS
    CSA C22.2 No. 1335.1 : 1993 : R2004 PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS
    C22.2 nº 1335 No. 1-93 (R2018) PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS
    CSA C22.2 No. 107.3 : 2014 UNINTERRUPTIBLE POWER SYSTEMS
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    ISO 11601:2017 Fire fighting — Wheeled fire extinguishers — Performance and construction
    BS EN 61730-1 : 2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    I.S. EN 60601- 1:2006&A1:2013&AC:2014&A12:2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    SAE ARP 5526 : 2015 AIRCRAFT SEAT DESIGN GUIDANCE AND CLARIFICATIONS
    CSA C22.2 No. 61730-1 : 2011 : INC : UPD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 : R2016 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 61730-1 : 2011 : INC : AMD 1 : 2013 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    AAMI ES60601-1 : 2005 : INC : AMD 1 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    AAMI ES60601-1 : 2005 : INC : AMD 2 : 2012 : R201200 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    UL 1647:6ED 2015-08 Motor-Operated Massage and Exercise Machines
    AAMI ES60601-1 : 2005 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    15/30322606 DC : 0 BS ISO 22702 - UTILITY LIGHTERS - SAFETY SPECIFICATIONS
    13/30238229 DC : 0 BS EN 62052-31 - ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TEST AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS
    EN 62052-31:2016 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
    I.S. EN 61730-1:2007 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 1335.1 : 1993(R2008) PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS
    CSA C22.2 No. 61010.1 : 2012 : FR SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    C22.2 NO. 280-16 Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016)
    SAE J 1772 : 2017 SAE ELECTRIC VEHICLE AND PLUG IN HYBRID ELECTRIC VEHICLE CONDUCTIVE CHARGE COUPLER
    EN 61010-1:2010 Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    AAMI ES60601-1 : 2005 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE (IEC 60601-1:2005, MOD)
    UL 1431:3ED 2011-03 Personal Hygiene and Health Care Appliances
    UL 1727:5ED 2012-05 Commercial Electric Personal Grooming Appliances
    UL 943B:3ED 2017-12 Appliance Leakage-Current Interrupters
    UL 697:7ED 2011-03 Toy Transformers
    UL 1618:2ED 2015-10 Wall Protectors, Floor Protectors, and Hearth Extensions
    UL 1602:4ED 2009-01 Gasoline-Engine-Powered, Rigid-Cutting-Member Edgers and Edger-Trimmers
    NEMA LSD 45:2009 RECOMMENDATIONS FOR SOLID STATE LIGHTING SUB-ASSEMBLY INTERFACES FOR LUMINAIRES
    CSA C22.2 No. 61010.1 :2012 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    CSA C22.2 No. 60601.1 : 2014 MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    CSA C22.2 No. 309 : 2016 INDUSTRIAL CLOTHES DRYERS
    CAN/CSA-C22.2 NO. 61010-1-12 (R2017) Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01)
    I.S. EN 61010-1:2010/A1:2019 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    IEEE 2030.1.1-2015 IEEE Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles
    00/243909 DC : DRAFT AUG 2000 IEC 61730-1 - PHOTOVOLTAIC MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    UNE-EN 61010-1:2011 Safety requirements for electrical equipment for measurement, control and laboratory use -- Part 1: General requirements
    UL 863:8ED 2007-11 Standard for Time-Indicating and -Recording Appliances
    UL 1517:3ED 2007-04 Hybrid Personal Flotation Devices
    UL 756:8ED 2016-08 Standard for Coin and Currency Changers and Actuators
    UL 1559:5ED 2011-03 Insect-Control Equipment - Electrocution Type
    UL 1083:6ED 2009-01 Household Electric Skillets and Frying-Type Appliances
    UL 1863:4ED 2004-05 Standard for Communications-Circuit Accessories
    CSA C22.2 No. 94.1 : 2015 ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS
    UL 626:8ED 2005-02 Water Fire Extinguishers
    UL 1086:6ED 2016-08 Household Trash Compactors
    UNE-EN 60601-1:2008 Medical electrical equipment -- Part 1: General requirements for basic safety and essential performance
    UL 8:7ED 2016-11 Water Based Agent Fire Extinguishers
    ISA 61010-1 : 2008 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    UL 1082:6ED 2009-03 Household Electric Coffee Makers and Brewing-Type Appliances
    UL 763:5ED 2018-02 Motor-Operated Commercial Food Preparing Machines
    UL 181B:3ED 2013-01 Closure Systems for Use With Flexible Air Ducts and Air Connectors
    UL 499:14ED 2014-11 Electric Heating Appliances
    UL 283:3ED 2015-06 Air Fresheners and Deodorizers
    UL 1778:5ED 2014-06 Uninterruptible Power Systems
    UL 2251:4ED 2017-11 Plugs, Receptacles, and Couplers for Electric Vehicles
    UL 268A:4ED 2008-12 Smoke Detectors for Duct Application
    UL 50:13ED 2015-10 Enclosures for Electrical Equipment, Non-Environmental Considerations
    UL 2572:2ED 2016-03 Mass Notification Systems
    UL 775:3ED 1998-02 Standard for Graphic Arts Equipment
    UL 1795:5ED 2016-09 Standard for Hydromassage Bathtubs
    UL 2044 : 3 COMMERCIAL CLOSED-CIRCUIT TELEVISION EQUIPMENT
    UL 864:10ED 2014-12 Standard for Control Units and Accessories for Fire Alarm Systems
    UL 1484:5ED 2016-04 Residential Gas Detectors
    UL 2129:3ED 2017-01 Halocarbon Clean Agent Fire Extinguishers
    ASTM F 2571 : 2015 : REDLINE Standard Test Methods for Evaluating Design and Performance Characteristics of Fitness Equipment
    CSA C22.2 No. 1335.1 : 1993(R2013) PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS
    CSA C22.2 No. 167 : 2017 HOUSEHOLD DISHWASHERS
    CSA C22.2 No. 61730-1 : 2011 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    SAE J 3068 :2018 ELECTRIC VEHICLE POWER TRANSFER SYSTEM USING A THREE-PHASE CAPABLE COUPLER
    UL 959:9ED 2010-12 Medium Heat Appliance Factory-Built Chimneys
    ISO 7165:2017 Fire fighting — Portable fire extinguishers — Performance and construction
    IEC 62052-31:2015 Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 31: Product safety requirements and tests
    BS EN 60601-1 : 2006 MEDICAL ELECTRICAL EQUIPMENT PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    BS ISO 11601:2017 Fire fighting. Wheeled fire extinguishers. Performance and construction
    IEC 60601-1:2005+AMD1:2012 CSV Medical electrical equipment - Part 1: General requirements for basic safety and essential performance
    IEC TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use - General requirements for equipment intended to be used in educational establishments by children
    UL 1563:6ED 2009-07 Electric Spas, Equipment Assemblies, and Associated Equipment
    UL 82:9ED 2017-08 Electric Gardening Appliances
    UL 1971:3ED 2002-11 Signaling Devices for the Deaf and Hard of Hearing
    UL 961:5ED 2014-12 Standard for Electric Hobby and Sports Equipment
    UL 73:10ED 2011-03 Motor-Operated Appliances
    04/30106146 DC : DRAFT MARCH 2004 BS EN 60601-1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE
    CSA C22.2 No. 61730-1 : 2011 : INC : AMD 2 : 2015 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION
    C22.2 NO. 243-17 Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017)
    CSA C22.2 No. 282 : 2013 PLUGS, RECEPTACLES, AND COUPLERS FOR ELECTRIC VEHICLES
    I.S. EN 62052-31:2016 ELECTRICITY METERING EQUIPMENT (AC) - GENERAL REQUIREMENTS, TESTS AND TEST CONDITIONS - PART 31: PRODUCT SAFETY REQUIREMENTS AND TESTS
    ASTM F 2988 : 2012 Standard Specification for Commercial Coffee Brewers
    CSA C22.2 No. 61 : 2016 HOUSEHOLD COOKING RANGES
    UL 1659:3ED 2005-04 Attachment Plug Blades for Use in Cord Sets and Power-Supply Cords
    CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    I.S. EN 61010-1:2010 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS
    14/30299887 DC : 0 BS ISO 11601 - FIRE FIGHTING - WHEELED FIRE EXTINGUISHERS - PERFORMANCE AND CONSTRUCTION
    PD IEC/TS 62850:2013 Safety requirements for electrical equipment for measurement, control, and laboratory use. General requirements for equipment intended to be used in educational establishments by children
    IEC 61010-1:2010+AMD1:2016 CSV Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements
    EN 61730-1:2007/A11:2014 PHOTOVOLTAIC (PV) MODULE SAFETY QUALIFICATION - PART 1: REQUIREMENTS FOR CONSTRUCTION (IEC 61730-1:2004, MODIFIED)
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective