• UL 1998 : 3

    Current The latest, up-to-date edition.

    SOFTWARE IN PROGRAMMABLE COMPONENTS

    Available format(s):  Hardcopy

    Language(s):  English

    Published date:  24-09-2018

    Publisher:  Underwriters Laboratories

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 General
    3 Glossary
    Investigation
    4 Details
    Design
    5 General
    6 Critical and supervisory sections
    7 Measures to address hardware failures and
        malfunctions
    8 Outputs
    9 System
    10 User interfaces
    Software code level analysis and testing
    11 Details
    Documentation
    12 Details
    13 User documentation
    Software changes
    14 Details
    Identification
    15 Details
    Appendix
    A Example of the application of table 7.1

    Abstract - (Show below) - (Hide below)

    Pertains to non-networked embedded microprocessor software whose failure is capable of resulting in a risk of fire, electric shock, or injury to persons.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher Underwriters Laboratories
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE 1683 : 2014 GUIDE FOR MOTOR CONTROL CENTERS RATED UP TO AND INCLUDING 600 V AC OR 1000 V DC WITH RECOMMENDATIONS INTENDED TO HELP REDUCE ELECTRICAL HAZARDS
    CSA C22.2 No. 62109-1 : 2016 SAFETY OF POWER CONVERTERS FOR USE IN PHOTOVOLTAIC POWER SYSTEMS - PART 1: GENERAL REQUIREMENTS
    ANSI/CSA FC 1:2014 FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY
    CSA FC 3 : 2004 PORTABLE FUEL CELL POWER SYSTEMS
    CSA FC 3 : 2004 : R2017 PORTABLE FUEL CELL POWER SYSTEMS
    SAE J 2578 : 2014 RECOMMENDED PRACTICE FOR GENERAL FUEL CELL VEHICLE SAFETY
    CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
    ANSI Z21.5.1-2017/CSA 7.1-2017 Gas clothes dryers, volume I, type 1 clothes dryers
    CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
    ANSI Z21.87 : 2007 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
    CSA C22.2 No. 199 :2007 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    C22.2 NO. 236-15 Heating and cooling equipment (Bi-national standard with UL 1995)
    CSA C22.2 No. 169 : 2015 ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS
    CSA C22.2 No. 167 : 2017 HOUSEHOLD DISHWASHERS
    CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
    CSA C22.2 No. 199 : 2007 : R2011 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    ANSI Z21.87 :2007 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
    CSA C22.2 No. 199 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2: PARTICULAR REQUIREMENTS FOR AUTOMATIC BURNER IGNITION SYSTEMS AND COMPONENTS
    ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012 AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS
    ANSI Z21.5.1 : 2017 GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS
    CSA HGV 4.6 : 2013 MANUALLY OPERATED VALVES FOR USE IN GASEOUS HYDROGEN VEHICLE FUELING STATIONS
    C22.2 NO. 280-16 Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016)
    ANSI FC 1 : 2012 STATIONARY FUEL CELL POWER SYSTEMS
    ANSI/CSA HGV 4.8-2012 (R2018) Hydrogen gas vehicle fueling station compressor guidelines
    CSA HPIT 2-2017 Dispensing systems and components for fueling hydrogen powered industrial trucks
    CSA HGV 4.9 : 2016 HYDROGEN FUELING STATIONS
    I.S. EN 62733:2015 PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS
    I.S. EN 61557-15:2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
    SAE J 2579 : 2013 STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES
    UL 1647 : 6 MOTOR-OPERATED MASSAGE AND EXERCISE MACHINES
    CSA HGV 4.1 : 2013 STANDARD FOR HYDROGEN DISPENSING SYSTEMS
    BS EN 62733:2015 (published 2018-04) Programmable components in electronic lamp controlgear. General and safety requirements
    13/30248264 DC : 0 BS EN 62733 - PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - PART 1: GENERAL AND SAFETY REQUIREMENTS
    12/30228018 DC : 0 BS EN 61557-15 - ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES AND FOR EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS
    13/30276640 DC : 0 BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY
    BS EN 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. Equipment for testing, measuring or monitoring of protective measures Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    UL 1447 : 6 ELECTRIC LAWN MOWERS
    BS EN 62282-4-101 : 2014 FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS
    IEC 61557-15:2014 Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 15: Functional safety requirements for insulation monitoring devices in IT systems and equipment for insulation fault location in IT systems
    UL 82 : 9 ELECTRIC GARDENING APPLIANCES
    IEC 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
    UL 541 : 9ED 2016 REFRIGERATED VENDING MACHINES
    UL 563 : 8 ICE MAKERS
    UL 1090 : 7 ELECTRIC SNOW MOVERS
    UL 325 : 7ED 2017-05 DOOR, DRAPERY, GATE, LOUVER, AND WINDOW OPERATORS AND SYSTEMS
    UL 3703 : 3 SOLAR TRACKERS
    UL 1740 : 4 ROBOTS AND ROBOTIC EQUIPMENT
    CAN/CSA-C22.2 NO. 281.2-12 (R2017) Standard for safety for personnel protection systems for electric vehicle (EV) supply circuits: Particular requirements for protection devices for use in charging systems (Tri-national standard, with UL 2231-2 and NMX-J-668/2-ANCE)
    CSA C22.2 No. 281.2 : 2012 : INC : UPD 2 : 2016 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
    UL 873 : 2012 TEMPERATURE-INDICATING AND REGULATING EQUIPMENT
    UL 399 : 8 DRINKING-WATER COOLERS
    CSA C22.2 No. 112 : 2015 ELECTRIC CLOTHES DRYERS
    UL 1995 : 5 HEATING AND COOLING EQUIPMENT
    UL 1699B : 2 PHOTOVOLTAIC (PV) DC ARC-FAULT CIRCUIT PROTECTION
    UL 756 : 8 COIN AND CURRENCY CHANGERS AND ACTUATORS
    UL 979 : 2 WATER TREATMENT APPLIANCES
    UL 1559:5ED 2011-03 Insect-Control Equipment - Electrocution Type
    UL 2265A : 2 UL LLC Outline of Investigation for Micro Fuel Cell Power Systems Using Direct Methanol Fuel Cell Technology
    UL 2006 : 5 HALON 1211 RECOVERY/RECHARGE EQUIPMENT
    UL 458 : 6 POWER CONVERTERS/INVERTERS AND POWER CONVERTER/INVERTER SYSTEMS FOR LAND VEHICLES AND MARINE CRAFTS
    UL 621 : 7 ICE CREAM MAKERS
    UL 1083 : 6 HOUSEHOLD ELECTRIC SKILLETS AND FRYING-TYPE APPLIANCES
    UL 2267 : 2 FUEL CELL POWER SYSTEMS FOR INSTALLATION IN INDUSTRIAL ELECTRIC TRUCKS
    UL 710B : 2 RECIRCULATING SYSTEMS
    CSA C22.2 No. 60335-1:2011 SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    UL 963 : 4ED 2016 SEALING, WRAPPING AND MARKING EQUIPMENT
    UL 2231-2 : 2 PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
    UL 1042 : 5 ELECTRIC BASEBOARD HEATING EQUIPMENT
    UL 1812 : 4 DUCTED HEAT RECOVERY VENTILATORS
    UL 795 : 8 COMMERCIAL-INDUSTRIAL GAS HEATING EQUIPMENT
    UL 60730-2-2 : 2 AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE; PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS
    UL 1699 : 3ED 2017 ARC-FAULT CIRCUIT-INTERRUPTERS
    CSA C22.2 No. 281.2:2012 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
    UL 295 : 2 COMMERCIAL-INDUSTRIAL GAS BURNERS
    UL 705 : 7 POWER VENTILATORS
    UL 2271 : 2 BATTERIES FOR USE IN LIGHT ELECTRIC VEHICLE (LEV) APPLICATIONS
    UL 1018 : 6 ELECTRIC AQUARIUM EQUIPMENT
    UL 499 : 2014 ELECTRIC HEATING APPLIANCES
    UL 283 : 3 AIR FRESHENERS AND DEODORIZERS
    UL 2021 : 4 FIXED AND LOCATION-DEDICATED ELECTRIC ROOM HEATERS
    UL 749 : 2017 HOUSEHOLD DISHWASHERS
    UL 474 : 2010 DEHUMIDIFIERS
    UL 2594 : 3 ELECTRIC VEHICLE SUPPLY EQUIPMENT
    UL 130 : 2013 ELECTRIC HEATING PADS
    UL 2735 : 2 ELECTRIC UTILITY METERS
    CAN/CSA-C22.2 NO. 60335-1:11 (R2016) Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1)
    UL 60335-1 : 6ED 2016-10 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS
    UL 201 : 3 GARAGE EQUIPMENT
    UL 858 : 2016 HOUSEHOLD ELECTRIC RANGES
    UL 1973 : 2 BATTERIES FOR USE IN STATIONARY, VEHICLE AUXILIARY POWER AND LIGHT ELECTRIC RAIL (LER) APPLICATIONS
    UL 867 : 5 ELECTROSTATIC AIR CLEANERS
    UL 962 : 4 HOUSEHOLD AND COMMERCIAL FURNISHINGS
    UL 430 : 8 WASTE DISPOSERS
    CSA C22.2 No. 281.2 : 2012 : INC : UPD 1 : 2015 STANDARD FOR SAFETY FOR PERSONNEL PROTECTION SYSTEMS FOR ELECTRIC VEHICLE (EV) SUPPLY CIRCUITS: PARTICULAR REQUIREMENTS FOR PROTECTION DEVICES FOR USE IN CHARGING SYSTEMS
    UL 2416 : 2 AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT CABINET, ENCLOSURE AND RACK SYSTEMS
    UL 1815 : 5 NONDUCTED HEAT RECOVERY VENTILATORS
    UL 197 : 2010 COMMERCIAL ELECTRIC COOKING APPLIANCES
    UL 1453 : 6 ELECTRIC BOOSTER AND COMMERCIAL STORAGE TANK WATER HEATERS
    UL 60730-1 : 5ED 2016-08 AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS
    UL 1238 : 6 CONTROL EQUIPMENT FOR USE WITH FLAMMABLE LIQUID DISPENSING DEVICES
    ANSI B11 TR4 : 2004 SELECTION OF PROGRAMMABLE ELECTRONIC SYSTEMS (PES/PLC) FOR MACHINE TOOLS
    ANSI B11 TR6 : 2010 MACHINES - SAFETY CONTROL SYSTEM FOR MACHINE TOOLS
    EN 62733:2015/AC:2017-09 PROGRAMMABLE COMPONENTS IN ELECTRONIC LAMP CONTROLGEAR - GENERAL AND SAFETY REQUIREMENTS
    EN 61557-15 : 2014 ELECTRICAL SAFETY IN LOW VOLTAGE DISTRIBUTION SYSTEMS UP TO 1000 V A.C. AND 1500 V D.C. - EQUIPMENT FOR TESTING, MEASURING OR MONITORING OF PROTECTIVE MEASURES - PART 15: FUNCTIONAL SAFETY REQUIREMENTS FOR INSULATION MONITORING DEVICES IN IT SYSTEMS AND EQUIPMENT FOR INSULATION FAULT LOCATION IN IT SYSTEMS (IEC 61557-15:2014)
    EN 62282-4-101:2014 Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective