• There are no items in your cart

UL 60335-2-72:1ED 2017-09

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

Household and Similar Electrical Appliances - Safety - Part 2-72: Particular Requirements for Floor Treatment Machines With or Without Traction Drive, for Commercial Use

Available format(s)

Hardcopy

Superseded date

08-06-2021

Language(s)

English

Published date

15-09-2017

PREFACE
NATIONAL DIFFERENCES
FOREWORD
INTRODUCTION
1 Scope
2 Normative references
3 Terms and definitions
4 General requirement
5 General conditions for the tests
6 Classification
7 Marking and instructions
8 Protection against access to live parts
9 Starting of motor-operated appliances
10 Power input and current
11 Heating
12 Void
13 Leakage current and electric strength at operating
   temperature
14 Transient overvoltages
15 Moisture resistance
16 Leakage current and electric strength
17 Overload protection of transformers and associated
   circuits
18 Endurance
19 Abnormal operation
20 Stability and mechanical hazards
21 Mechanical strength
22 Construction
23 Internal wiring
24 Components
25 Supply connection and external flexible cords
26 Terminals for external conductors
27 Provision for earthing
28 Screws and connections
29 Clearances, creepage distances and solid insulation
30 Resistance to heat and fire
31 Resistance to rusting
32 Radiation, toxicity and similar hazards
Annexes
Annex A (informative) - Routine Tests
Annex B (normative) - Appliances powered by rechargeable
        batteries
Annex D (normative) - Thermal motor protectors
Annex AA (normative) - Precast paving slabs
Annex BB (normative) - Requirements for internal combustion
         engine powered machines using liquefied petroleum
         gas (LPG)
Annex CC (normative) - Falling-object protective structures
         (FOPS) - Dynamic test and performance requirements
Annex DD (informative) - Emission of acoustical noise
Annex EE (informative) - Emission of vibration
Annex DVA (normative) - Component standards cross
          reference
Annex 101.DVA (informative) - Requirements for internal
              combustion engine powered machines using fuels
              such as, but not limited to, ethanol-gasoline
              blends, gasoline, biodiesel, and diesel
Annex 101.DVB (normative) - Component standards
Annex 101.DVC (normative) - Tabs used in electrical
              quick-connect terminals
Annex 101.DVD (normative) - Additional requirements for
              Type S machines
Annex 101.DVE (normative) - Additional requirements for
              Type EE machines
Annex 101.DVF (Canada only) (normative) - French
              marking translations
Bibliography

Applies with the safety of powered ride-on and powered WALK-BEHIND MACHINES intended for commercial indoor or outdoor use for the following applications: - sweeping, - scrubbing, - wet or dry pick-up, - polishing, - application of wax, sealing products and powder based detergents, - shampooing of floors with an artificial surface.

DevelopmentNote
Also numbered as CSA C22.2.60335-2-72. (09/2017) NEW CHILD REV 1 IS NOW ADDED
DocumentType
Standard
Pages
0
ProductNote
NEW CHILD REV 1 IS NOW ADDED
PublisherName
Underwriters Laboratories
Status
Superseded
SupersededBy

UL 60335-2-67:1ED 2017-12 Household and Similar Appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercial use
CSA C22.2 No. 60335-2-67 : 2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-67: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES, FOR COMMERCIAL USE

IEC 60695-11-20:2015 Fire hazard testing - Part 11-20: Test flames - 500 W flame test method
ISO 4871:1996 Acoustics — Declaration and verification of noise emission values of machinery and equipment
CGA V 1 : 2013 STANDARD FOR COMPRESSED GAS CYLINDER VALVE OUTLET AND INLET CONNECTIONS
ISO 3744:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane
IEC 60216-6:2006 Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method
ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
C22.2 NO. 243-17 Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017)
ISO 7574-4:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 4: Methods for stated values for batches of machines
NFPA 505 : 2013 FIRE SAFETY STANDARD FOR POWERED INDUSTRIAL TRUCKS INCLUDING TYPE DESIGNATIONS, AREAS OF USE, CONVERSIONS, MAINTENANCE, AND OPERATIONS
ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
SAE J 2045 : 2012 PERFORMANCE REQUIREMENTS FOR FUEL SYSTEM TUBING ASSEMBLIES
ISO 5353:1995 Earth-moving machinery, and tractors and machinery for agriculture and forestry Seat index point
SAE J 1681 : 2000 GASOLINE, ALCOHOL, AND DIESEL FUEL SURROGATES FOR MATERIALS TESTING
CGA 8.3 : 2015 THERMOPLASTIC HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS
IEC 60335-2-67:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-67: Particular requirements for floor treatment machines, for commercialuse
ASME B31.3:2016 PROCESS PIPING
ISO 9614-2:1996 Acoustics — Determination of sound power levels of noise sources using sound intensity — Part 2: Measurement by scanning
ISO 7574-1:1985 Acoustics — Statistical methods for determining and verifying stated noise emission values of machinery and equipment — Part 1: General considerations and definitions
SAE J 1128 : 2015 LOW VOLTAGE PRIMARY CABLE
IEC 60695-10-3:2016 Fire hazard testing - Part 10-3: Abnormal heat - Mould stress relief distortion test
IEC 60335-2-10:2002+AMD1:2008 CSV Household and similar electrical appliances - Safety - Part 2-10: Particular requirements for floor treatment machines and wet scrubbing machines
IEC 60335-2-69:2016 Household and similar electrical appliances - Safety - Part 2-69: Particular requirements for wet and dry vacuum cleaners, including power brush, for commercial use
CGA 8.1 : 2015 ELASTOMERIC COMPOSITE HOSE AND HOSE COUPLINGS FOR CONDUCTING PROPANE AND NATURAL GAS
CSA E60335.2.10 : 2006 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-10: PARTICULAR REQUIREMENTS FOR FLOOR TREATMENT MACHINES AND WET SCRUBBING MACHINES
CSA E60335.2.69 : 2001 SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 2: PARTICULAR REQUIREMENTS FOR WET AND DRY VACUUM CLEANERS, INCLUDING POWER BRUSH, FOR INDUSTRIAL AND COMMERCIAL USE
CSA C22.2 No. 10 : 1965 ELECTRIC FLOOR SURFACING AND CLEANING MACHINES
ISO 13857:2008 Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs
ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
ISO 3864-1:2011 Graphical symbols Safety colours and safety signs Part 1: Design principles for safety signs and safety markings
CSA C22.2 No. 0.23 : 2015 GENERAL REQUIREMENTS FOR BATTERY-POWERED APPLIANCES
SAE J 1127 : 2015 LOW VOLTAGE BATTERY CABLE
SAE J 30 : 2012 FUEL AND OIL HOSES
ISO 3405:2011 Petroleum products Determination of distillation characteristics at atmospheric pressure
ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
IEC 60312-1:2010+AMD1:2011 CSV Vacuum cleaners for household use - Part 1: Dry vacuum cleaners - Methods for measuring the performance
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems
SAE J 2044 : 2009 QUICK CONNECT COUPLING SPECIFICATION FOR LIQUID FUEL AND VAPOR/EMISSIONS SYSTEMS
EN 13019:2001+A1:2008 Machines for road surface cleaning - Safety requirements
UL 569:8ED 2013-11 Pigtails and Flexible Hose Connectors for LP-Gas
UL 21:11ED 2014-12 LP-Gas Hose
ISO 13849-1:2015 Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design
IEC 60335-2-68:2012+AMD1:2016 CSV Household and similar electrical appliances - Safety - Part 2-68:Particular requirements for spray extraction machines, for commercial use
ISO 11201:2010 Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections
SAE J 2260 : 2004 NONMETALLIC FUEL SYSTEM TUBING WITH ONE OR MORE LAYERS
ISO 6344-2:1998 Coated abrasives Grain size analysis Part 2: Determination of grain size distribution of macrogrits P12 to P220
UL 1426:5ED 2010-12 Electrical Cables for Boats
ISO 3743-1:2010 Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for small movable sources in reverberant fields Part 1: Comparison method for a hard-walled test room

View more information
€615.80
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.