|
MIL L 81745 : B
|
LAUNCHER CONTAINER, (A) SIZE SONOBUOY LAU-126/A |
|
NFPA 99C : 2005
|
GAS AND VACUUM SYSTEMS |
|
DIN EN 54-23:2010-06
|
Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices |
|
MIL I 24728 : A
|
INTERCONNECTION BOX, FIBER OPTIC, METRIC, GENERAL SPECIFICATION FOR |
|
ANSI INCITS 200 : 1992
|
INFORMATION SYSTEMS - UNRECORDED OPTICAL MEDIA UNIT FOR DIGITAL INFORMATION INTERCHANGE - 356 MM WORM OPTICAL DISK CARTRIDGE - PARTS 1 AND 2 |
|
ASTM F 1021 : 1995
|
Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines |
|
ASTM F 968 : 1993 : R1998
|
Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
ANSI INCITS 235 : 1995 : R2000
|
INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 10000 - 12500 FTPI (394 - 492 FTPMM) COERCIVITY 550 OERSTEDS (44000 AMPERES/METER) (TYPES 6150, 6250, 6037) |
|
MIL PRF 19207 : G
|
FUSEHOLDERS, EXTRACTOR POST TYPE, BLOWN FUSE, INDICATING AND NONINDICATING, GENERAL SPECIFICATION FOR |
|
UL 1054 : 7
|
SPECIAL-USE SWITCHES |
|
UL 810A : 1
|
ELECTROCHEMICAL CAPACITORS |
|
SAE J 2685 : 2014
|
POSITIVE TEMPERATURE COEFFICIENT OVERCURRENT PROTECTION DEVICES (PTCS) |
|
ASTM D 5948 : 2005
|
Standard Specification for Molding Compounds, Thermosetting |
|
ANSI INCITS 199 : 1991 : R2007
|
INFORMATION SYSTEMS - 356 MM OPTICAL DISK CARTRIDGE (WRITE-ONCE) - TEST METHODS FOR MEDIA CHARACTERISTICS |
|
UL 154 : 9
|
CARBON-DIOXIDE FIRE EXTINGUISHERS |
|
CSA C22.2 No. 1335.1 : 1993(R2008)
|
PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
|
CSA C22.2 No. 1335.1 : 1993 : R2013
|
PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
|
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2012
|
AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
|
ANSI INCITS 197 : 1991 : R2017
|
INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE 1/2 IN (12.65 MM), SERIAL SERPENTINE, 22-TRACK, 6667 FTPI (262 FTPMM) AND 48-TRACK, 10,000 FTPI (394 FTPMM) |
|
CSA C22.2 No. 18.1 : 2013 : INC : UPD 1 : 2015
|
METALLIC OUTLET BOXES |
|
ANSI INCITS 312 : 1998
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128-TRACK, 81 600 BPI (3212 BPMM) DLT4 FORMAT |
|
CSA C22.2 No. 27 : 2009 : INC : UPD 1 : 2011
|
BUSWAYS |
|
CSA C22.2 No. 1335.1 : 1993 : R2004
|
PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
|
ANSI Z21.87 : 2007 : R2012
|
AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
|
C22.2 nº 1335 No. 1-93 (R2018)
|
PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
|
ANSI INCITS 315 : 1998
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 128-TRACK, PARALLEL SERPENTINE, 12.65 MM (1/2 IN), 2550 FTPMM (64 770 FTPI) |
|
CAN/CSA-C22.2 NO. 60947-1-13 (R2018)
|
Low-voltage switchgear and controlgear - Part 1: General rules (Tri-national standard, with UL 60947-1 and NMX-J-515-ANCE) |
|
CSA C22.2 No. 12 : 1982 : R2013
|
PORTABLE LUMINAIRES |
|
CSA C60044-8 : 2007 : R2016
|
INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
|
ANSI FC 1 : 2012
|
STATIONARY FUEL CELL POWER SYSTEMS |
|
CSA C22.2 No. 107.3 : 2014
|
UNINTERRUPTIBLE POWER SYSTEMS |
|
EIA 446 : A1981
|
NON-SENSITIVE PUSHBUTTON SWITCHES, |
|
EIA 415 : B1986
|
SOCKETS FOR USE WITH DUAL AND SINGLE IN-LINE ELECTRONIC PACKAGES AND OTHER ELECTRONIC COMPONENTS, |
|
IEEE C37.20.2 : 2015
|
METAL-CLAD SWITCHGEAR |
|
CSA C22.2 No. 2459 : 2008 : INC : UPD 1 : 2014 : R201300
|
INSULATED MULTI-POLE SPLICING WIRE CONNECTORS |
|
I.S. EN 54-23:2010
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
|
IEEE 1578 : 2007
|
STATIONARY BATTERY ELECTROLYTE SPILL CONTAINMENT AND MANAGEMENT |
|
UL 231 : 2010
|
POWER OUTLETS |
|
CSA C22.2 No. 61058.1 : 2009 : R2014
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
CSA C22.2 No. 153:2009
|
ELECTRICAL QUICK-CONNECT TERMINALS |
|
ASTM D 5927 : 2017 : REDLINE
|
Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods |
|
CSA C22.2 No. 0.17 : 2000
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 :2015
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
ASTM F 2468 : 2005 : R2011
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
NFPA 556 : 2016
|
GUIDE ON METHODS FOR EVALUATING FIRE HAZARD TO OCCUPANTS OF PASSENGER ROAD VEHICLES |
|
UL 1647 : 6
|
MOTOR-OPERATED MASSAGE AND EXERCISE MACHINES |
|
UL 1203 : 5
|
EXPLOSION-PROOF AND DUST-IGNITION-PROOF ELECTRICAL EQUIPMENT FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
|
NFPA 90B : 2018
|
INSTALLATION OF WARM AIR HEATING AND AIR-CONDITIONING SYSTEMS |
|
UL 87 : 2016
|
Standard for Power-Operated Dispensing Devices for Petroleum Products |
|
NFPA 1192 : 2018
|
RECREATIONAL VEHICLES |
|
NFPA 556 : 2020
|
GUIDE ON METHODS FOR EVALUATING FIRE HAZARD TO OCCUPANTS OF PASSENGER ROAD VEHICLES |
|
ANSI N42.49A : 2011
|
PERFORMANCE CRITERIA FOR ALARMING ELECTRONIC PERSONAL EMERGENCY RADIATION DETECTORS (PERDS) FOR EXPOSURE CONTROL |
|
01/714099 DC : DRAFT OCT 2001
|
ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
|
CSA C22.2 No. 104 : 2011 : R2015
|
HUMIDIFIERS |
|
DD IEC PAS 62326-14 : 2010
|
PRINTED BOARDS - PART 14: DEVICE EMBEDDED SUBSTRATE - TERMINOLOGY/RELIABILITY/DESIGN GUIDE |
|
BS ISO 16750-2 : 2012
|
ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
|
IEC PAS 62250:2001
|
Qualification and performance specification for rigid printed boards (IPC 6012A with Amendment 1) |
|
05/30116652 DC : DRAFT MAY 2005
|
ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
|
PD IEC/PAS 61249-8-1:2014
|
Qualification and performance of electrical insulating compound for printed wiring assemblies |
|
BS ISO 7176-14:2008 (published 2008-06)
|
Wheelchairs Power and control systems for electrically powered wheelchairs and scooters. Requirements and test methods |
|
08/30173378 DC : DRAFT AUG 2008
|
BS ISO 16750-2 - ROAD VEHICLES - ENVIRONMENTAL CONDITIONS AND TESTING FOR ELECTRICAL AND ELECTRONIC EQUIPMENT - PART 2: ELECTRICAL LOADS |
|
EN 62680-2-3 : 2015
|
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER - PART 2-3: UNIVERSAL SERIAL BUS CABLES AND CONNECTORS CLASS DOCUMENT, REVISION 2.0 (TA 14) (IEC 62680-2-3:2015) |
|
EN 61189-2:2006
|
TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES |
|
EN 62149-6 : 2003
|
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 6: 650-NM 250-MBIT/S PLASTIC OPTICAL FIBRE TRANSCEIVERS |
|
A A 55570/1 : D
|
FUSEHOLDER, EXTRACTOR POST, IN-LINE TYPE, ACCOMMODATES FAST ACTING, AUTOMOTIVE BLADE TYPE, INCLOSED LINK FUSES |
|
UL 542 : 9
|
FLUORESCENT LAMP STARTERS |
|
IEEE C37.14:2015
|
DC (3200 V AND BELOW) POWER CIRCUIT BREAKERS USED IN ENCLOSURES |
|
EIA 498 : 1985
|
KEYBOARD SWITCHES OF CERTIFIED QUALITY, GENERIC SPECIFICATION FOR, |
|
ANSI INCITS 266 : 1996 : R2001
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 112-TRACK, 42 500 BPI (1 673 BPMM), DLT2 FORMAT |
|
ASTM D 5948 : 2005 : R2012
|
Standard Specification for Molding Compounds, Thermosetting |
|
ANSI INCITS 345 : 2001
|
MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT |
|
ANSI INCITS 266 : 1996 : R2006
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 112-TRACK, 42 500 BPI (1 673 BPMM), DLT2 FORMAT |
|
ANSI INCITS 267 : 1996 : R2006
|
INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE |
|
CSA 2.3 : 2016
|
GAS-FIRED CENTRAL FURNACES |
|
ASTM F 1021 : 1995 : R2013
|
Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines |
|
ANSI INCITS 329 : 2000
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT |
|
CSA 4.6 : 2007 : INC : ADD A : 2010 : R2016
|
AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
|
ANSI Z21.5.1-2017/CSA 7.1-2017
|
Gas clothes dryers, volume I, type 1 clothes dryers |
|
ANSI Z21.92 : 2001 : INC : ADD A : 2005 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2012
|
AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
|
ANSI Z21.92 : 2001 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
ANSI Z21.5.1 : 2017
|
GAS CLOTHES DRYERS, VOLUME 1, TYPE 1 CLOTHES DRYERS |
|
ISO 7176-14:2008
|
Wheelchairs Part 14: Power and control systems for electrically powered wheelchairs and scooters Requirements and test methods |
|
CSA C60044-8 : 2007 : R2011
|
INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
|
C22.2 NO. 280-16
|
Electric vehicle supply equipment (Tri-national standard, with UL 2594 and NMX-J-677-ANCE-2016) |
|
ANSI INCITS 249 : 1995 : R2005
|
INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE MINI-CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 10000-14700 FTPI (394-579 FTPMM) COERCIVITY 550 OERSTEDS (44000 AMPERES/METER) (TYPES 2000, 2060, 2080, 2120) |
|
ANSI INCITS 249 : 1995 : R2000
|
INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE MINI-CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 10000-14700 FTPI (394-579 FTPMM) COERCIVITY 550 OERSTEDS (44000 AMPERES/METER) (TYPES 2000, 2060, 2080, 2120) |
|
EIA 480 : 1981
|
TOGGLE SWITCHES, |
|
ASTM F 1918 : 2012
|
Standard Safety Performance Specification for Soft Contained Play Equipment |
|
ANSI INCITS 180 : 1990 : R2001
|
MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - 18-TRACK, PARALLEL, 1/2 INCH (12.65 MM), 37871 CPI (1491 CPMM), GROUP-CODED - REQUIREMENTS FOR RECORDING |
|
CSA C22.2 No. 29 : 2015
|
PANELBOARDS AND ENCLOSED PANELBOARDS |
|
CSA C22.2 No. 18-4 : 2004 : INC : AMD 2 : 2009
|
HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
|
NFPA 501C : 1996
|
RECREATIONAL VEHICLES |
|
IEC 62149-6:2003
|
Fibre optic active components and devices - Performance standards - Part 6: 650-nm 250-Mbit/s plastic optical fibre transceivers |
|
CSA C22.2 No. 61058.1 : 2009 : INC : UPD 1 : 2013
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
UL 310 : 9
|
ELECTRICAL QUICK-CONNECT TERMINALS |
|
SAE J 1928 : 2012
|
DEVICES PROVIDING BACKFIRE FLAME CONTROL FOR GASOLINE ENGINES IN MARINE APPLICATIONS |
|
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 1 : 2015
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
(INACTIVE RECORD)ASTM D 5336 : 2015-04
|
CLASSIFICATION SYSTEM AND BASIS FOR SPECIFICATION FOR POLYPHTHALAMIDE (PPA) INJECTION MOLDING MATERIALS |
|
CSA C22.2 No. 0.17 : 2000 : R2013
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
ASTM D 4000 : 2016 : REDLINE
|
Standard Classification System for Specifying Plastic Materials |
|
UL 498 : 16ED 2017
|
ATTACHMENT PLUGS AND RECEPTACLES |
|
UL 60079-1 : 7
|
EXPLOSIVE ATMOSPHERES - PART 1: EQUIPMENT PROTECTION BY FLAMEPROOF ENCLOSURES 'D' |
|
UL 87B : 5
|
POWER-OPERATED DISPENSING DEVICES FOR DIESEL FUEL, BIODIESEL FUEL, DIESEL/BIODIESEL BLENDS WITH NOMINAL BIODIESEL CONCENTRATIONS UP TO 20 PERCENT (B20), KEROSENE, AND FUEL OIL |
|
UL 429 : 7ED 2013
|
ELECTRICALLY OPERATED VALVES |
|
UL 508A:3ED 2018-04
|
Industrial Control Panels |
|
CSA C22.2 No. 60335.2.24 : 2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-24: PARTICULAR REQUIREMENTS FOR REFRIGERATING APPLIANCES, ICE-CREAM APPLIANCES AND ICE-MAKERS |
|
IEEE C37.13 : 2015
|
LOW-VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES |
|
ANSI N42.49B : 2013
|
PERFORMANCE CRITERIA FOR NON-ALARMING PERSONAL EMERGENCY RADIATION DETECTORS (PERDS) FOR EXPOSURE CONTROL |
|
CSA C22.2 No. 60320-1 : 2011 : R2016
|
APPLIANCE COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
|
UL 1323 : 4
|
SCAFFOLD HOISTS |
|
DIN EN 54-23 :2010-06
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
|
UL 737 : 2010
|
FIREPLACE STOVES |
|
UL 1431 : 3
|
PERSONAL HYGIENE AND HEALTH CARE APPLIANCES |
|
CGA 2.29 : 1997 : R2014
|
HAND-HELD TORCHES FOR FUEL GASES |
|
IEC 62680-4:2013
|
Universal serial bus interfaces for data and power - Part 4: Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 |
|
13/30295427 DC : 0
|
BS IEC/PAS 61249-8-5 ED.1 - QUALIFICATION AND PERFORMANCE SPECIFICATION OF PERMANENT SOLDER MASK AND FLEXIBLE COVER MATERIALS |
|
14/30311240 DC : 0
|
BS EN 61010-1 ED 3 AMD 1 - SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
BS EN ISO 15791-1 : 2013
|
PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
|
UL 560 : 1993
|
ELECTRIC HOME-LAUNDRY EQUIPMENT |
|
UL 1017 : 2010
|
VACUUM CLEANERS, BLOWER CLEANERS, AND HOUSEHOLD FLOOR FINISHING MACHINES |
|
UL 962 : 4
|
HOUSEHOLD AND COMMERCIAL FURNISHINGS |
|
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2016
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
UL 826 : 2007
|
HOUSEHOLD ELECTRIC CLOCKS |
|
UL 430 : 8
|
WASTE DISPOSERS |
|
UL 943B : 3
|
APPLIANCE LEAKAGE-CURRENT INTERRUPTERS |
|
UL 2255 : 2
|
RECEPTACLE CLOSURES |
|
UL 864 : 2018
|
CONTROL UNITS AND ACCESSORIES FOR FIRE ALARM SYSTEMS |
|
UL 1640 : 4
|
PORTABLE POWER-DISTRIBUTION EQUIPMENT |
|
UL 879 : 9
|
ELECTRIC SIGN COMPONENTS |
|
UL 1149 : 2
|
LOW VOLTAGE MARINE LIGHTING FIXTURES |
|
UL 268 : 7
|
SMOKE DETECTORS FOR FIRE ALARM SYSTEMS |
|
UL 2388 : 2
|
FLEXIBLE LIGHTING PRODUCTS |
|
UL 697 : 7
|
TOY TRANSFORMERS |
|
C22.2 NO. 4248.1-17
|
Fuseholders Part 1: General requirements (Trinational standard with UL 4248-1 and NMX-J-009/4248/1-ANCE) |
|
UL 61010B-1 : 1
|
ELECTRICAL MEASURING AND TEST EQUIPMENT - PART 1: GENERAL REQUIREMENTS |
|
UL 745-1 : 2
|
PORTABLE ELECTRIC TOOLS |
|
UL 217 : 8
|
SMOKE ALARMS |
|
UL 1815 : 5
|
NONDUCTED HEAT RECOVERY VENTILATORS |
|
UL 1206 : 4
|
ELECTRIC COMMERCIAL CLOTHES-WASHING EQUIPMENT |
|
UL 180 : 8
|
LIQUID-LEVEL GAUGES FOR OIL BURNER FUELS AND OTHER COMBUSTIBLE LIQUIDS |
|
UL 497C : 2
|
PROTECTORS FOR COAXIAL COMMUNICATIONS CIRCUITS |
|
UL 1730 : 4
|
SMOKE DETECTOR MONITORS AND ACCESSORIES FOR INDIVIDUAL LIVING UNITS OF MULTIFAMILY RESIDENCES AND HOTEL/MOTEL ROOMS |
|
UL 1113 : 4
|
ELECTRICALLY OPERATED PUMPS FOR NONFLAMMABLE LIQUIDS, MARINE |
|
UL 2416 : 2
|
AUDIO/VIDEO, INFORMATION AND COMMUNICATION TECHNOLOGY EQUIPMENT CABINET, ENCLOSURE AND RACK SYSTEMS |
|
UL 365 : 5
|
POLICE STATION CONNECTED BURGLAR ALARM UNITS AND SYSTEMS |
|
UL 2239 : 2
|
HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
|
UL 1005 : 4
|
ELECTRIC FLATIRONS |
|
UL 1662 : 2
|
ELECTRIC CHAIN SAWS |
|
CSA C22.2 No. 184.1 : 2015
|
SOLID-STATE DIMMING CONTROLS |
|
UL 745-4-36 : 1
|
PARTICULAR REQUIREMENTS FOR BATTERY OPERATED HAND MOTOR TOOLS |
|
UL 197 : 2010
|
COMMERCIAL ELECTRIC COOKING APPLIANCES |
|
UL 2040 : 2
|
FOLDING ROLLAWAY TABLES |
|
UL 1077 : 7
|
SUPPLEMENTARY PROTECTORS FOR USE IN ELECTRICAL EQUIPMENT |
|
UL 1917 : 4
|
SOLID-STATE FAN SPEED CONTROLS |
|
UL 1058 : 4
|
HALOGENATED AGENT EXTINGUISHING SYSTEM UNITS |
|
UL 2158A : 3
|
CLOTHES DRYER TRANSITION DUCT |
|
UL 299 : 2012
|
DRY CHEMICAL FIRE EXTINGUISHERS |
|
UL 985:6ED 2015-05
|
Household Fire Warning System Units |
|
UL 867 : 5
|
ELECTROSTATIC AIR CLEANERS |
|
UL 1240 : 4
|
ELECTRIC COMMERCIAL CLOTHES-DRYING EQUIPMENT |
|
UL 1238 : 6
|
CONTROL EQUIPMENT FOR USE WITH FLAMMABLE LIQUID DISPENSING DEVICES |
|
CSA M421 : 2011
|
USE OF ELECTRICITY IN MINES |
|
UL 810 : 5
|
CAPACITORS |
|
UL 60730-1 : 5ED 2016-08
|
AUTOMATIC ELECTRICAL CONTROLS - PART 1: GENERAL REQUIREMENTS |
|
UL 636 : 2011
|
HOLDUP ALARM UNITS AND SYSTEMS |
|
UL 746F : 2
|
POLYMERIC MATERIALS - FLEXIBLE DIELECTRIC FILM MATERIALS FOR USE IN PRINTED-WIRING BOARDS AND FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS |
|
UL 60950-1 : 2
|
INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
UL 2459 : 1
|
INSULATED MULTI-POLE SPLICING WIRE CONNECTORS |
|
ANSI/CSA NGV 5.1-2016 (R2020)
|
Residential fueling appliances |
|
CSA C22.2 No. 111 : 2010 : R2015
|
GENERAL-USE SNAP SWITCHES |
|
DIN 7748-2:1989-03
|
PLASTIC MOULDING MATERIALS; UNPLASTICIZED POLYVINYL CHLORIDE (PVC-U) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
|
DIN 16772-2:1988-12
|
PLASTIC MOULDING MATERIALS - ACRYLONITRILE BUTADIENE STYRENE (ABS) MOULDING MATERIALS - PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
|
I.S. EN ISO 15791-1:2013
|
PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014) |
|
CSA C22.2 No.111 : 2010
|
GENERAL-USE SNAP SWITCHES |
|
CSA C22.2 No. 111 : 2010 : INC : UPD 1 : 2012
|
GENERAL-USE SNAP SWITCHES |
|
CSA NGV 5.1 : 2016
|
RESIDENTIAL FUELING APPLIANCES |
|
DIN 7741-2:1988-12
|
PLASTIC MOULDING MATERIALS; POLYSTYRENE (PS) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
|
DIN 16771-2:1988-12
|
PLASTIC MOULDING MATERIALS; STYRENE/BUTADIENE (SB) MOULDING MATERIALS; PREPARATION OF SPECIMENS AND DETERMINATION OF THEIR PROPERTIES |
|
MIL PRF 32168 : 0
|
VARIABLE SPEED DRIVE SYSTEM FOR INDUCTION AND SYNCHRONOUS MACHINES |
|
CSA C22.2 No. 253 : 2016
|
MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES |
|
ASTM D 6394 : 2014 : REDLINE
|
Standard Specification for Sulfone Plastics (SP) |
|
ANSI INCITS 242 : 1994 : R1999
|
INFORMATION SYSTEMS - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.50 IN (12.65 MM), SERIAL SERPENTINE, 48-TRACK, 42 500 BPI (1673 BPMM) |
|
ANSI/CSA FC 1:2014
|
FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
|
CSA C22.2 No. 63 : 1993
|
HOUSEHOLD REFRIGERATORS AND FREEZERS |
|
C22.2 NO. 27-09 (R2017)
|
Busways (Tri-national standard, with UL 857 and NMX-J-148-ANCE) |
|
ANSI INCITS 329 : 2000 : R2015
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT |
|
ANSI Z21.87 :2007
|
AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
|
CSA C22.2 No. 169 : 2015
|
ELECTRIC CLOTHES WASHING MACHINES AND EXTRACTORS |
|
CSA C22.2 No. 63 : 1993 : R2013
|
HOUSEHOLD REFRIGERATORS AND FREEZERS |
|
C22.2 NO. 188-18
|
Splicing wire connectors (Trinational standard with UL 486C and NXM-J- 548-ANCE) |
|
CSA C22.2 No. 63 : 1993 : INC : UPD 6 : 2012 : R200800
|
HOUSEHOLD REFRIGERATORS AND FREEZERS |
|
CSA C60044-2 : 2007
|
INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
|
C22.2 NO. 18.3-12 (R2017)
|
Conduit, tubing, and cable fittings (Tri-national standard, with ANCE NMX-J-017 and UL 514B) |
|
C22.2 NO. 43-17
|
Lampholders (Binational standard with UL 496) |
|
CSA C22.2 No. 18.3 : 2012
|
CONDUIT, TUBING, AND CABLE FITTINGS |
|
ASTM D 5205 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Polyetherimide (PEI) Materials |
|
ANSI Z21.92 : 2001 : INC : ADD B : 2010
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
CSA C60044-8 :2007
|
INSTRUMENT TRANSFORMERS - PART 8: ELECTRONIC CURRENT TRANSFORMERS |
|
CSA C60044-2 : 2007 : R2011
|
INSTRUMENT TRANSFORMERS - PART 2: INDUCTIVE VOLTAGE TRANSFORMERS |
|
CSA C22.2 No. 18.1 : 2013
|
METALLIC OUTLET BOXES |
|
CSA/ANSI NGV 5.2-2017
|
Vehicle fueling appliances (VFA) |
|
ANSI INCITS 197 : 1991 : R2002
|
INFORMATION SYSTEMS - UNRECORDED MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE 1/2 IN (12.65 MM), SERIAL SERPENTINE, 22-TRACK, 6667 FTPI (262 FTPMM) AND 48-TRACK, 10,000 FTPI (394 FTPMM) |
|
CSA C22.2 No. 1691 : 2012
|
SINGLE POLE LOCKING-TYPE SEPARABLE CONNECTORS |
|
DSCC 89040 : D
|
RESISTOR, FIXED, WIRE WOUND, SURFACE MOUNT, POWER TYPE (2.5 WATTS) |
|
ANSI INCITS 191 : 1991
|
INFORMATION SYSTEMS - RECORDED OPTICAL MEDIA UNIT FOR DIGITAL INFORMATION INTERCHANGE - 130 MM WRITE-ONCE SAMPLED-SERVO RZ SELECTABLE-PITCH OPTICAL DISK CARTRIDGE |
|
CSA C22.2 No. 2459 : 2008 : R2013
|
INSULATED MULTI-POLE SPLICING WIRE CONNECTORS |
|
CSA C22.2 No. 2459 : 2008
|
INSULATED MULTI-POLE SPLICING WIRE CONNECTORS |
|
CAN/CSA-C22.2 NO. 61010-2-201:18
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment (Adopted IEC 61020-2-201:2017, second edition, 2017-03, with Canadian deviations) | Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire — Partie 2-201 : Exigences particulières pour les équipements de commande (norme IEC 61010-2-201:2017 adoptée, deuxième édition, 2017-03, avec exigences propres au Canada) |
|
IEC PAS 62326-14:2010
|
Printed boards - Part 14: Device embedded substrate - Terminology / reliability / design guide |
|
ASTM D 5138 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP) |
|
ASTM D 3801 : 2010-08
|
TEST METHOD FOR MEASURING THE COMPARATIVE BURNING CHARACTERISTICS OF SOLID PLASTICS IN A VERTICAL POSITION |
|
CSA C22.2 No. 12 : 1982 : R2004
|
PORTABLE LUMINAIRES |
|
ASTM F 968 : 1993 : R2002
|
Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
CAN/CSA-C22.2 NO. 61010-1-12 (R2017)
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements (Tri-national standard, with UL 61010-1 and ANSI/ISA-61010-1 (82.02.01) |
|
ASTM D 4349 : 2016 : REDLINE
|
Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials |
|
ISO/TR 14799-1:2015
|
Comparison of worldwide escalator and moving walk safety standards Part 1: Rule by rule comparison |
|
SAE J 1772 : 2017
|
SAE ELECTRIC VEHICLE AND PLUG IN HYBRID ELECTRIC VEHICLE CONDUCTIVE CHARGE COUPLER |
|
I.S. EN 62149-6:2003
|
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 6: 650-NM 250-MBIT/S PLASTIC OPTICAL FIBRE TRANSCEIVERS |
|
IEC TS 62239-1:2015
|
Process management for avionics - Management plan - Part 1: Preparation and maintenance of an electronic components management plan |
|
UL 87A : 9
|
POWER-OPERATED DISPENSING DEVICES FOR GASOLINE AND GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 - E85) |
|
IEEE 1635 : 2012
|
VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
|
IEC 62680-2-3:2015
|
Universal serial bus interfaces for data and power - Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 |
|
IEC PAS 62686-1:2011
|
Process management for avionics - Aerospace qualified electronic components (AQEC) - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors |
|
04/30089279 DC : DRAFT FEB 2004
|
ISO 21848 - ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR 42 V NETWORKS - ELECTRICAL LOADS |
|
UNE-ISO 16750-2:2015
|
Road vehicles. Environmental conditions and testing for electrical and electronic equipment. Part 2: Electrical loads. |
|
UL 1993 : 5
|
SELF-BALLASTED LAMPS AND LAMP ADAPTERS |
|
UL 1681 : 4
|
WIRING DEVICE CONFIGURATIONS |
|
UL 1740 : 4
|
ROBOTS AND ROBOTIC EQUIPMENT |
|
UL 1411 : 7
|
TRANSFORMERS AND MOTOR TRANSFORMERS FOR USE IN AUDIO-, RADIO-, AND TELEVISION-TYPE APPLIANCES |
|
UL 507 : 2010
|
ELECTRIC FANS |
|
UL 139 : 7
|
MEDIUM- AND HIGH-EXPANSION FOAM-EXTINGUISHING SYSTEM EQUIPMENT AND CONCENTRATES |
|
CSA C22.2 No. 227.1:2006
|
ELECTRICAL NONMETALLIC TUBING |
|
UL 5C : 3
|
SURFACE RACEWAYS AND FITTINGS FOR USE WITH DATA, SIGNAL AND CONTROL CIRCUITS |
|
UL 1897 : 7
|
UPLIFT TESTS FOR ROOF COVERING SYSTEMS |
|
UL 873 : 2012
|
TEMPERATURE-INDICATING AND REGULATING EQUIPMENT |
|
UL 796F : 3
|
FLEXIBLE MATERIALS INTERCONNECT CONSTRUCTIONS |
|
UL 1692 : 2
|
POLYMERIC MATERIALS - COIL FORMS |
|
CSA C22.2 No. 112 : 2015
|
ELECTRIC CLOTHES DRYERS |
|
UL 1059 : 4
|
TERMINAL BLOCKS |
|
UL 399 : 8
|
DRINKING-WATER COOLERS |
|
UL 746E : 6
|
POLYMERIC MATERIALS - INDUSTRIAL LAMINATES, FILAMENT WOUND TUBING, VULCANIZED FIBRE, AND MATERIALS USED IN PRINTED-WIRING BOARDS |
|
UL 793 : 3
|
AUTOMATICALLY OPERATED ROOF VENTS FOR SMOKE AND HEAT |
|
UL 1004 : 5ED REV MAR 2006
|
ELECTRIC MOTORS |
|
UL 962A : 4
|
FURNITURE POWER DISTRIBUTION UNITS |
|
UL 1363 : 4
|
RELOCATABLE POWER TAPS |
|
UL 162 : 8
|
FOAM EQUIPMENT AND LIQUID CONCENTRATES |
|
UL 1995 : 5
|
HEATING AND COOLING EQUIPMENT |
|
UL 756 : 8
|
COIN AND CURRENCY CHANGERS AND ACTUATORS |
|
UL 979 : 2
|
WATER TREATMENT APPLIANCES |
|
UL 854 : 2004
|
SERVICE-ENTRANCE CABLES |
|
UL 2106 : 2
|
FIELD ERECTED BOILER ASSEMBLIES |
|
UL 2703 : 2
|
MOUNTING SYSTEMS, MOUNTING DEVICES, CLAMPING/RETENTION DEVICES, AND GROUND LUGS FOR USE WITH FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS |
|
UL 565 : 6
|
LIQUID-LEVEL GAUGES FOR ANHYDROUS AMMONIA AND LP-GAS |
|
UL 525 : 8
|
FLAME ARRESTERS |
|
UL 1004-1 : 2
|
ROTATING ELECTRICAL MACHINES - GENERAL REQUIREMENTS |
|
UL 1682 : 5
|
PLUGS, RECEPTACLES, AND CABLE CONNECTORS OF THE PIN AND SLEEVE TYPE |
|
UL 727 : 2018
|
OIL-FIRED CENTRAL FURNACES |
|
CSA M421 : 2011 : R2016
|
USE OF ELECTRICITY IN MINES |
|
UL 561 : 7
|
FLOOR-FINISHING MACHINES |
|
UL 1559:5ED 2011-03
|
Insect-Control Equipment - Electrocution Type |
|
UL 1310 : 7
|
CLASS 2 POWER UNITS |
|
UL 1786 : 4
|
DIRECT PLUG-IN NIGHTLIGHTS |
|
UL 1667 : 3
|
TALL INSTITUTIONAL CARTS FOR USE WITH AUDIO-, VIDEO-, AND TELEVISION-TYPE EQUIPMENT |
|
UL 998 : 5
|
HUMIDIFIERS |
|
UL 458 : 6
|
POWER CONVERTERS/INVERTERS AND POWER CONVERTER/INVERTER SYSTEMS FOR LAND VEHICLES AND MARINE CRAFTS |
|
UL 921 : 7
|
COMMERCIAL DISHWASHERS |
|
UL 621 : 7
|
ICE CREAM MAKERS |
|
CSA C22.2 No. 227.1 : 2006 : INC : UPD 2 : 2014 : R201100
|
ELECTRICAL NONMETALLIC TUBING |
|
UL 2017 : 2
|
GENERAL-PURPOSE SIGNALING DEVICES AND SYSTEMS |
|
UL 796 : 2011
|
PRINTED-WIRING BOARDS |
|
UL 1693 : 3
|
ELECTRIC RADIANT HEATING PANELS AND HEATING PANEL SETS |
|
UL 771 : 9
|
NIGHT DEPOSITORIES |
|
UL 291 : 6
|
AUTOMATED TELLER SYSTEMS |
|
UL 1863 : 4
|
COMMUNICATIONS-CIRCUIT ACCESSORIES |
|
UL 626 : 8
|
WATER FIRE EXTINGUISHERS |
|
CSA C22.2 No. 94.1 : 2015
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS |
|
UL 858A : 3
|
SAFETY-RELATED SOLID-STATE CONTROLS FOR HOUSEHOLD ELECTRIC RANGES |
|
UL 907 : 4
|
FIREPLACE ACCESSORIES |
|
UL 1573 : 4
|
STAGE AND STUDIO LUMINAIRES AND CONNECTOR STRIPS |
|
UL 1286 : 5
|
OFFICE FURNISHINGS |
|
UL 8 : 7
|
WATER BASED AGENT FIRE EXTINGUISHERS |
|
UL 1996 : 4
|
ELECTRIC DUCT HEATERS |
|
UL 752 : 2011
|
BULLET-RESISTING EQUIPMENT |
|
UL 60947-7-1 : 4
|
LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 7-1: ANCILLARY EQUIPMENT - TERMINAL BLOCKS FOR COPPER CONDUCTORS |
|
UL 495 : 4
|
POWER-OPERATED DISPENSING DEVICES FOR LP-GAS |
|
ASHRAE GUIDELINE 21 : 2012
|
VENTILATION AND THERMAL MANAGEMENT OF BATTERIES FOR STATIONARY APPLICATIONS |
|
UL 710B : 2
|
RECIRCULATING SYSTEMS |
|
UL 963 : 4ED 2016
|
SEALING, WRAPPING AND MARKING EQUIPMENT |
|
CSA C22.2 No. 60335-1:2011
|
SAFETY OF HOUSEHOLD AND SIMILAR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
UL 1322 : 6
|
FABRICATED SCAFFOLD PLANKS AND STAGES |
|
UL 2108 : 2
|
LOW VOLTAGE LIGHTING SYSTEMS |
|
UL 2075 : 2
|
GAS AND VAPOR DETECTORS AND SENSORS |
|
UL 1419 : 4
|
PROFESSIONAL VIDEO AND AUDIO EQUIPMENT |
|
CSA C22.2 No. 62.1 : 2015
|
NONMETALLIC SURFACE RACEWAYS AND FITTINGS |
|
UL 1037 : 6
|
ANTITHEFT ALARMS AND DEVICES |
|
UL 1812 : 4
|
DUCTED HEAT RECOVERY VENTILATORS |
|
UL 795 : 8
|
COMMERCIAL-INDUSTRIAL GAS HEATING EQUIPMENT |
|
C22.2 NO. 1993-17
|
Self-ballasted lamps and lamp adapters (Trinational standard with NMX-J-578/1-ANCE and UL 1993) |
|
UL 5A : 4
|
NONMETALLIC SURFACE RACEWAYS AND FITTINGS |
|
UL 1776 : 3
|
HIGH-PRESSURE CLEANING MACHINES |
|
ISA 61010-1 : 2008
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
UL 60730-2-2 : 2
|
AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE; PART 2: PARTICULAR REQUIREMENTS FOR THERMAL MOTOR PROTECTORS |
|
UL 1963 : 4
|
Refrigerant Recovery/Recycling Equipment |
|
UL 1053 : 7
|
GROUND-FAULT SENSING AND RELAYING EQUIPMENT |
|
CSA C22.2 No. 94.2 : 2015
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS |
|
UL 1838 : 3
|
LOW VOLTAGE LANDSCAPE LIGHTING SYSTEMS |
|
UL 588 : 19ED 2015
|
SEASONAL AND HOLIDAY DECORATIVE PRODUCTS |
|
UL 977 : 5
|
FUSED POWER-CIRCUIT DEVICES |
|
UL 1711 : 4
|
AMPLIFIERS FOR FIRE PROTECTIVE SIGNALLING SYSTEMS |
|
UL 1236:8ED 2015-04
|
Battery Chargers for Charging Engine-Starter Batteries |
|
UL 60065 : 8
|
AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS |
|
CSA C22 NO. 4 : 2016
|
ENCLOSED AND DEAD-FRONT SWITCHES |
|
UL 295 : 2
|
COMMERCIAL-INDUSTRIAL GAS BURNERS |
|
UL 493 : 9
|
THERMOPLASTIC-INSULATED UNDERGROUND FEEDER AND BRANCH-CIRCUIT CABLES |
|
UL 2034 : 4
|
SINGLE AND MULTIPLE STATION CARBON MONOXIDE ALARMS |
|
UL 1696 : 2
|
MECHANICAL PROTECTION TUBING (MPT) AND FITTINGS |
|
UL 122 : 5
|
PHOTOGRAPHIC EQUIPMENT |
|
UL 1821 : 3
|
THERMOPLASTIC SPRINKLER PIPE AND FITTINGS FOR FIRE PROTECTION SERVICE |
|
UL 680 : 8
|
EMERGENCY VAULT VENTILATORS AND VAULT-VENTILATING PORTS |
|
UL 98 : 2016
|
ENCLOSED AND DEAD-FRONT SWITCHES |
|
UL 294 : 7
|
ACCESS CONTROL SYSTEM UNITS |
|
UL 2158 : 5
|
ELECTRIC CLOTHES DRYERS |
|
UL 705 : 7
|
POWER VENTILATORS |
|
UL 2595 : 2ED 2015
|
GENERAL REQUIREMENTS FOR BATTERY-POWERED APPLIANCES |
|
UL 2695 : 2
|
DC RATED ATTACHMENT PLUGS AND OUTLET DEVICES INTENDED FOR USE WITH INFORMATION TECHNOLOGY AND TELECOMMUNICATION EQUIPMENT INSTALLED IN RESTRICTED ACCESS LOCATIONS |
|
UL 1034 : 6
|
BURGLARY-RESISTANT ELECTRIC LOCKING MECHANISMS |
|
UL 150 : 4
|
ANTENNA ROTATORS |
|
UL 6703 : 3
|
CONNECTORS FOR USE IN PHOTOVOLTAIC SYSTEMS |
|
UL 935 : 2010
|
FLUORESCENT-LAMP BALLASTS |
|
UL 7700-1 : 3
|
PORTABLE PNEUMATIC TOOLS |
|
UL 586:9ED 2009-08
|
High-Efficiency, Particulate, Air Filter Units |
|
UL 1481 : 5
|
POWER SUPPLIES FOR FIRE PROTECTIVE SIGNALLING SYSTEMS |
|
UL 1261 : 6
|
ELECTRIC WATER HEATERS FOR POOLS AND TUBS |
|
UL 1703 : 3
|
FLAT-PLATE PHOTOVOLTAIC MODULES AND PANELS |
|
UL 2271 : 2
|
BATTERIES FOR USE IN LIGHT ELECTRIC VEHICLE (LEV) APPLICATIONS |
|
UL 61058-1: 5ED 2017-11
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
UL 412 : 5
|
REFRIGERATION UNIT COOLERS |
|
UL 913 : 8
|
INTRINSICALLY SAFE APPARATUS AND ASSOCIATED APPARATUS FOR USE IN CLASS 1, 2, 3, DIVISION 1, HAZARDOUS (CLASSIFIED) LOCATIONS |
|
UL 2161 : 2
|
NEON TRANSFORMERS AND POWER SUPPLIES |
|
UL 559 : 85 REV SEP 93
|
HEAT PUMPS |
|
UL 1977 : 3
|
COMPONENT CONNECTORS FOR USE IN DATA, SIGNAL, CONTROL AND POWER APPLICATIONS |
|
UL 1480 : 6
|
SPEAKERS FOR FIRE ALARM AND SIGNALING SYSTEMS, INCLUDING ACCESSORIES |
|
UL 763:5ED 2018-02
|
Motor-Operated Commercial Food Preparing Machines |
|
UL 181B : 3
|
CLOSURE SYSTEMS FOR USE WITH FLEXIBLE AIR DUCTS AND AIR CONNECTORS |
|
UL 486A-486B : 3
|
WIRE CONNECTORS |
|
UL 730:5ED 2003-08
|
Oil-Fired Wall Furnaces |
|
UL 923 : 7
|
MICROWAVE COOKING APPLIANCES |
|
UL 1018 : 6
|
ELECTRIC AQUARIUM EQUIPMENT |
|
UL 4248-1 : 2
|
FUSEHOLDERS - PART 1: GENERAL REQUIREMENTS |
|
UL 1472:2ED 2015-09
|
Solid-State Dimming Controls |
|
UL 2089 : 3
|
VEHICLE BATTERY ADAPTERS |
|
UL 1047 : 6
|
Standard for Isolated Power Systems Equipment |
|
UL 1683:2ED 2013 OUTLINE
|
ELECTRIC HEATING PRODUCTS FOR INSTALLATION UNDER FLOOR COVERINGS |
|
UL 496 : 2017
|
LAMPHOLDERS |
|
UL 283 : 3
|
AIR FRESHENERS AND DEODORIZERS |
|
UL 1637:5ED 2017-09
|
Home Health Care Signaling Equipment |
|
UL 87C : 4
|
POWER-OPERATED DISPENSING DEVICES FOR DIESEL EXHAUST FLUID |
|
UL 1778 : 5ED 2014-06
|
UNINTERRUPTIBLE POWER SYSTEMS |
|
CSA C22.2 No. 227.1 : 2006 : R2016
|
ELECTRICAL NONMETALLIC TUBING |
|
UL 3730 : 2
|
PHOTOVOLTAIC JUNCTION BOXES |
|
UL 65 : 7
|
WIRED CABINETS |
|
UL 2251 : 4
|
Standard for Plugs, Receptacles, and Couplers for Electric Vehicles |
|
UL 1340 : 3
|
HOISTS |
|
CSA 6.29 : 2001 : INC : ADD B : 2010
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
UL 877 : 4
|
CIRCUIT BREAKERS AND CIRCUIT-BREAKER ENCLOSURES FOR USE IN HAZARDOUS (CLASSIFIED) LOCATIONS |
|
UL 1012 : 8
|
POWER UNITS OTHER THAN CLASS 2 |
|
UL 497A : 3
|
SECONDARY PROTECTORS FOR COMMUNICATIONS CIRCUITS |
|
UL 22 : 6
|
AMUSEMENT AND GAMING MACHINES |
|
UL 857 : 2013
|
BUSWAYS |
|
UL 1254 : 4
|
PRE-ENGINEERED DRY CHEMICAL EXTINGUISHING SYSTEM UNITS |
|
UL 514A:11ED 2013-02
|
Metallic Outlet Boxes |
|
UL 60335-2-40 : 2
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
|
UL 1023 : 7
|
HOUSEHOLD BURGLAR-ALARM SYSTEM UNITS |
|
CSA 6.29 : 2001
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
UL 60320-1 : 2
|
APPLIANCES COUPLERS FOR HOUSEHOLD AND SIMILAR GENERAL PURPOSES - PART 1: GENERAL REQUIREMENTS |
|
UL 749 : 2017
|
HOUSEHOLD DISHWASHERS |
|
UL 391 : 5
|
SOLID-FUEL AND COMBINATION-FUEL CENTRAL AND SUPPLEMENTARY FURNACES |
|
CSA C22.2 No. 60335-2-40 : 2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-40: PARTICULAR REQUIREMENTS FOR ELECTRICAL HEAT PUMPS, AIR-CONDITIONERS AND DEHUMIDIFIERS |
|
CSA C22.2 No. 227.1 : 2006 : R2011
|
ELECTRICAL NONMETALLIC TUBING |
|
UL 1436 : 6
|
OUTLET CIRCUIT TESTERS AND SIMILAR INDICATING DEVICES |
|
UL 2788 : 1
|
INDUSTRIAL AND COMMERCIAL VIBRATORS |
|
UL 1951 : 2
|
ELECTRIC PLUMBING ACCESSORIES |
|
UL 729:6ED 2003-08
|
Oil-Fired Floor Furnaces |
|
UL 427 : 5
|
REFRIGERATING UNITS |
|
CSA C22.2 42.1 : 2013
|
COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
|
UL 268A : 4
|
SMOKE DETECTORS FOR DUCT APPLICATION |
|
UL 1635 : 4
|
DIGITAL ALARM COMMUNICATOR SYSTEM UNITS |
|
UL 50 : 2015
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT, NON-ENVIRONMENTAL CONSIDERATIONS |
|
UL 486F : 1ED REV JAN 2018
|
BARE AND COVERED FERRULES |
|
UL 733 : 4
|
OIL-FIRED AIR HEATERS AND DIRECT-FIRED HEATERS |
|
CSA C22.2 No. 227.2.1 : 2014
|
LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT |
|
UL 1598C : 2
|
LIGHT-EMITTING DIODE (LED) RETROFIT LUMINAIRE CONVERSION KITS |
|
UL 982 : 7
|
MOTOR-OPERATED HOUSEHOLD FOOD PREPARING MACHINES |
|
UL 467 : 2013
|
GROUNDING AND BONDING EQUIPMENT |
|
UL 307B : 5
|
GAS-BURNING HEATING APPLIANCES FOR MANUFACTURED HOMES AND RECREATIONAL VEHICLES |
|
UL 1448 : 5
|
ELECTRIC HEDGE TRIMMERS |
|
UL 474 : 2010
|
DEHUMIDIFIERS |
|
UL 2096 : 3
|
COMMERCIAL/INDUSTRIAL GAS AND/OR OIL-BURNING ASSEMBLIES WITH EMISSION REDUCTION EQUIPMENT |
|
UL 916 : 5
|
ENERGY MANAGEMENT EQUIPMENT |
|
UL 50E : 2
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT, ENVIRONMENTAL CONSIDERATIONS |
|
UL 1076 : 6
|
PROPRIETARY BURGLAR ALARM UNITS AND SYSTEMS |
|
UL 2572 : 2
|
MASS NOTIFICATION SYSTEMS |
|
UL 2594 : 3
|
ELECTRIC VEHICLE SUPPLY EQUIPMENT |
|
UL 1561 : 4
|
DRY-TYPE GENERAL PURPOSE AND POWER TRANSFORMERS |
|
UL 775 : 1998
|
GRAPHIC ARTS EQUIPMENT |
|
CAN/CSA-C22.2 NO. 60335-1:11 (R2016)
|
Safety of household and similar appliances - Part 1: General requirements (Tri-national standard, with NMX-J-521/1-ANCE and UL 60335-1) |
|
UL 62841-1 : 1ED REV APR 2018
|
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
UL 153 : 2013
|
PORTABLE ELECTRIC LUMINAIRES |
|
UL 1066 : 4
|
LOW-VOLTAGE AC AND DC POWER CIRCUIT BREAKERS USED IN ENCLOSURES |
|
UL 469 : 4
|
MUSICAL INSTRUMENTS AND ACCESSORIES |
|
UL 294B : 1
|
POWER OVER ETHERNET (POE) POWER SOURCES FOR ACCESS CONTROL SYSTEMS AND EQUIPMENT |
|
UL 2735 : 2
|
ELECTRIC UTILITY METERS |
|
UL 130 : 2013
|
ELECTRIC HEATING PADS |
|
UL 1876:4ED 2015-06
|
Isolating Signal and Feedback Transformers for Use in Electronic Equipment |
|
UL 1433 : 4
|
CONTROL CENTERS FOR CHANGING MESSAGE TYPE ELECTRIC SIGNS |
|
CSA 6.29 : 2001 : INC : ADD B : 2010 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
UL 242 : 4
|
NONMETALLIC CONTAINERS FOR WASTE PAPER |
|
UL 635 : 3
|
Insulating Bushings |
|
UL 609 : 2012
|
LOCAL BURGLAR ALARM UNITS AND SYSTEMS |
|
UL 2775 : 1
|
FIXED CONDENSED AEROSOL EXTINGUISHING SYSTEM UNITS |
|
UL 1820 : 4
|
FIRE TEST OF PNEUMATIC TUBING FOR FLAME AND SMOKE CHARACTERISTICS |
|
UL 1678 : 5
|
HOUSEHOLD, COMMERCIAL, AND INSTITUTIONAL-USE CARTS, STANDS AND ENTERTAINMENT CENTERS FOR USE WITH AUDIO AND/OR VIDEO EQUIPMENT |
|
UL 498A : 2
|
CURRENT TAPS AND ADAPTERS |
|
UL 2258 : 4
|
NONMETALLIC TANKS FOR OIL-BURNER FUELS AND OTHER COMBUSTIBLE LIQUIDS |
|
UL 1795 : 5
|
HYDROMASSAGE BATHTUBS |
|
UL 2262A : 2
|
BOROHYDRIDE FUEL CARTRIDGES WITH INTEGRAL FUEL PROCESSING FOR USE WITH PORTABLE FUEL CELL POWER SYSTEMS OR SIMILAR EQUIPMENT |
|
UL 69 : 2010
|
ELECTRIC-FENCE CONTROLLERS |
|
UL 1384 : 4ED 2016 OUTLINE
|
WATER-BASED AUTOMATIC EXTINGUISHER UNITS |
|
UL 60335-1 : 6ED 2016-10
|
SAFETY OF HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
UL 731 : 6
|
OIL-FIRED UNIT HEATERS |
|
UL 1660 : 5
|
LIQUID-TIGHT FLEXIBLE NONMETALLIC CONDUIT |
|
UL 201 : 3
|
GARAGE EQUIPMENT |
|
UL 2044 : 3
|
COMMERCIAL CLOSED-CIRCUIT TELEVISION EQUIPMENT |
|
UL 1449 : 4
|
SURGE PROTECTIVE DEVICES |
|
UL 732 : 6
|
OIL-FIRED STORAGE TANK WATER HEATERS |
|
UL 1610 : 4
|
CENTRAL-STATION BURGLAR-ALARM UNITS |
|
UL 1416 : 6
|
OVERCURRENT AND OVERTEMPERATURE PROTECTORS FOR RADIO- AND TELEVISION-TYPE APPLIANCES |
|
UL 858 : 2016
|
HOUSEHOLD ELECTRIC RANGES |
|
UL 1973 : 2
|
BATTERIES FOR USE IN STATIONARY, VEHICLE AUXILIARY POWER AND LIGHT ELECTRIC RAIL (LER) APPLICATIONS |
|
UL 67 : 2009
|
PANELBOARDS |
|
UL 1008 : 8
|
TRANSFER SWITCH EQUIPMENT |
|
UL 347 : 6
|
MEDIUM-VOLTAGE AC CONTACTORS, CONTROLLERS, AND CONTROL CENTRES |
|
UL 428A ED 1 : 2015
|
ELECTRICALLY OPERATED VALVES FOR GASOLINE AND GASOLINE/ETHANOL BLENDS WITH NOMINAL ETHANOL CONCENTRATIONS UP TO 85 PERCENT (E0 - E85) |
|
UL 514B : 6
|
CONDUIT, TUBING, AND CABLE FITTINGS |
|
UL 111 : 5
|
MULTIOUTLET ASSEMBLIES |
|
UL 1484:5ED 2016-04
|
Residential Gas Detectors |
|
UL 2129 : 3
|
HALOCARBON CLEAN AGENT FIRE EXTINGUISHERS |
|
MIL HDBK 454 : B
|
GENERAL GUIDELINES FOR ELECTRONIC EQUIPMENT |
|
EN ISO 15791-1:2013
|
PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE (ISO 15791-1:2014) |
|
UNI EN ISO 15791-1 : 2014
|
PLASTICS - DEVELOPMENT AND USE OF INTERMEDIATE-SCALE FIRE TESTS FOR PLASTICS PRODUCTS - PART 1: GENERAL GUIDANCE |
|
UNI EN 54-23 : 2010
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
|
SCTE 171 : 2016
|
PASSIVE NETWORK DEVICE (NID) ENCLOSURE SPECIFICATION |
|
ASTM F 712 : 2006
|
Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
ANSI INCITS 251 : 1995 : R2005
|
INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 20000 FTPI (787 FTPMM) COERCIVITY 550 OERSTEDS (44000 AMPERES/METER) (TYPES 6320, 6525, 6080, 6081) |
|
ANEP-80 : 2009
|
NATO SONOBUOY INTEROPERABILITY SPECIFICATION - COMMON SPECIFICATIONS |
|
ISO 21848:2005
|
Road vehicles Electrical and electronic equipment for a supply voltage of 42 V Electrical loads |
|
ANSI INCITS 345 : 2001 : R2006
|
MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 98214 BPI (3866 BPMM) DLT6 FORMAT |
|
MIL PRF 38535 : K
|
INTEGRATED CIRCUITS (MICROCIRCUITS) MANUFACTURING, GENERAL SPECIFICATION FOR |
|
ISO 16750-2:2012
|
Road vehicles Environmental conditions and testing for electrical and electronic equipment Part 2: Electrical loads |
|
ANSI INCITS 334 : 2000
|
MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT |
|
DSCC 86100 : D
|
CONNECTORS, ELECTRICAL, UNSHROUDED HEADERS, PWB TERMINATION |
|
ASTM PS 2 : 1994
|
Specification for Molding Plastics, Electrical, Thermoplastic (Withdrawn 1997) |
|
CSA C22.2 No. 1335.1 : 1993(R2013)
|
PORTABLE ELECTRICAL MOTOR-OPERATED AND HEATING APPLIANCES: GENERAL REQUIREMENTS |
|
IEEE C57.12.44 : 2014
|
REQUIREMENTS FOR SECONDARY NETWORK PROTECTORS |
|
ANSI INCITS 235 : 1995 : R2005
|
INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 10000 - 12500 FTPI (394 - 492 FTPMM) COERCIVITY 550 OERSTEDS (44000 AMPERES/METER) (TYPES 6150, 6250, 6037) |
|
ANSI Z83.21 : 2016
|
COMMERCIAL DISHWASHERS |
|
IEC PAS 62686-2:2016
|
Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 2: General requirements for passive components |
|
ANSI INCITS 199 : 1991 : R2002
|
INFORMATION SYSTEMS - 356 MM OPTICAL DISK CARTRIDGE (WRITE-ONCE) - TEST METHODS FOR MEDIA CHARACTERISTICS |
|
ASTM F 1918 : 2012 : R2017
|
Standard Safety Performance Specification for Soft Contained Play Equipment |
|
ANSI INCITS 267 : 1996 : R2001
|
INFORMATION TECHNOLOGY - HELICAL-SCAN DIGITAL COMPUTER TAPE CARTRIDGE, 12.65 MM (0.498 IN), FOR INFORMATION INTERCHANGE |
|
ANSI Z21.47 : 2016
|
GAS-FIRED CENTRAL FURNACES |
|
CSA C22.2 No. 27 : 2009 : R2013
|
BUSWAYS |
|
C22.2 NO. 18.1-13 (R2018)
|
Metallic outlet boxes (Tri-national standard, with UL 514A and ANCE NMX- J-023/1) |
|
SAE AMS P 46144 : 2015
|
PLASTIC SHEET, POLYCARBONATE |
|
CSA C22.2 No. 167 : 2017
|
HOUSEHOLD DISHWASHERS |
|
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2016
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
CSA C60044-1 : 2007 : R2011
|
INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
|
CSA C60044-1 : 2007
|
INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS |
|
ANSI Z21.92 : 2001 : INC : ADD B : 2010 : R2012
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
ANSI Z21.87 : 2007 : INC : ADD A : 2010 : R2017
|
AUTOMATIC GAS SHUTOFF DEVICES FOR HOT WATER SUPPLY SYSTEMS |
|
CSA B44.1 : 2014
|
ELEVATOR AND ESCALATOR ELECTRICAL EQUIPMENT |
|
SAE J 3068 :2018
|
ELECTRIC VEHICLE POWER TRANSFER SYSTEM USING A THREE-PHASE CAPABLE COUPLER |
|
ANSI/AIHA/ASSP Z9.9-2010
|
PORTABLE VENTILATION SYSTEMS |
|
UL 746D : 8
|
POLYMERIC MATERIALS - FABRICATED PARTS |
|
CSA C22.2 No. 42-1 : 2013 : INC : UPD 1 : 2016
|
COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
|
IEEE 1184:2006
|
GUIDE FOR BATTERIES FOR UNINTERRUPTIBLE POWER SUPPLY SYSTEMS |
|
I.S. EN 61189-2:2006
|
TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES |
|
CSA C22.2 No. 42-1 : 2013
|
COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
|
C22.2 NO. 2459-08 (R2017)
|
Insulated multi-pole splicing wire connectors (Bi-national standard, with UL 2459) |
|
IEC TS 62686-1:2015
|
Process management for avionics - Electronic components for aerospace, defence and high performance (ADHP) applications - Part 1: General requirements for high reliability integrated circuits and discrete semiconductors |
|
C22.2 NO. 182.1-17
|
Plugs, receptacles, and cable connectors of the pin and sleeve type (Trinational standard with NMX-J-719-ANCE and UL 1682) |
|
UL 346 : 5
|
WATERFLOW INDICATORS FOR FIRE PROTECTIVE SIGNALING SYSTEMS |
|
CSA C22.2 No. 18-4 : 2004 : R2009 : FR
|
HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
|
CSA C22.2 No. 178.1 : 2014
|
TRANSFER SWITCH EQUIPMENT |
|
SAE AS 12500 : 2018
|
CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
|
SAE J 2579 : 2013
|
STANDARD FOR FUEL SYSTEMS IN FUEL CELL AND OTHER HYDROGEN VEHICLES |
|
ASTM D 4634 : 2016 : REDLINE
|
Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA) |
|
IEEE 802.3-2012
|
ETHERNET - CORRIGENDUM 1: MULTI-LANE TIMESTAMPING |
|
CSA C22.2 No. 61058.1 : 2009
|
SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS |
|
ASTM D 5593 : 1999 : EDT 1
|
Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005) |
|
ASTM F 1021 : 1995 : R2001
|
Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines |
|
ISO/IEC/IEEE 8802-3:2017
|
Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 3: Standard for Ethernet |
|
ISO 7240-3:2010
|
Fire detection and alarm systems Part 3: Audible alarm devices |
|
UL 147 : 7
|
HAND-HELD TORCHES FOR FUEL GASES |
|
ISO/TR 14799-2:2015
|
Comparison of worldwide escalator and moving walk safety standards Part 2: Abbreviated comparison and comments |
|
ASME A17.1-2016/CSA B44-16
|
Safety code for elevators and escalators (Bi-national standard, with ASME A17.1) |
|
UL 1738 : 3
|
VENTING SYSTEMS FOR GAS-BURNING APPLIANCES, CATEGORIES 2, 3, AND 4 |
|
CSA C22.2 No. 168 : 2016
|
COMMERCIAL DISHWASHERS |
|
CSA C22.2 No. 227.3 : 2015
|
MECHANICAL PROTECTION TUBING (MPT) AND FITTINGS |
|
17/30365636 DC : 0
|
BS EN 62239-1 ED.1.0 - PROCESS MANAGEMENT FOR AVIONICS - MANAGEMENT PLAN - PART 1: PREPARATION AND MAINTENANCE OF AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
|
BS PD IEC TS 62239-1 : 2015
|
PROCESS MANAGEMENT FOR AVIONICS - MANAGEMENT PLAN - PART 1: PREPARATION AND MAINTENANCE OF AN ELECTRONIC COMPONENTS MANAGEMENT PLAN |
|
02/124520 DC : DRAFT DEC 2002
|
EN 14598-3 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 3: SPECIFIC REQUIREMENTS |
|
BS PD IEC/PAS 62686-2 : 2016
|
PROCESS MANAGEMENT FOR AVIONICS - ELECTRONIC COMPONENTS FOR AEROSPACE, DEFENCE AND HIGH PERFORMANCE (ADHP) APPLICATIONS - PART 2: GENERAL REQUIREMENTS FOR PASSIVE COMPONENTS |
|
CSA C22.2 No. 104:2011
|
HUMIDIFIERS |
|
BS EN 54-23 : 2010
|
FIRE DETECTION AND FIRE ALARM SYSTEMS - PART 23: FIRE ALARM DEVICES - VISUAL ALARM DEVICES |
|
BS EN 62680-4:2014
|
Universal serial bus interfaces for data and power Universal Serial Bus Cables and Connectors Class Document, Revision 2.0 |
|
DD IEC PAS 62686-1 : DRAFT JULY 2011
|
PROCESS MANAGEMENT FOR AVIONICS - AEROSPACE QUALIFIED ELECTRONIC COMPONENTS (AQEC) - PART 1: GENERAL REQUIREMENTS FOR HIGH RELIABILITY INTEGRATED CIRCUITS AND DISCRETE SEMICONDUCTORS |
|
IEC PAS 61249-8-5:2014
|
Qualification and performance specification of permanent solder mask and flexible cover materials |
|
CSA C22.2 No. 0.23 : 2015
|
GENERAL REQUIREMENTS FOR BATTERY-POWERED APPLIANCES |
|
UL 634 : 9
|
CONNECTORS AND SWITCHES FOR USE WITH BURGLAR-ALARM SYSTEMS |
|
UL 710 : 6
|
EXHAUST HOODS FOR COMMERCIAL COOKING EQUIPMENT |
|
UL 1447 : 6
|
ELECTRIC LAWN MOWERS |
|
UL 60079-0 : 6
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS |
|
UL 987 : 8
|
STATIONARY AND FIXED ELECTRIC TOOLS |
|
UL 2238 : 2
|
CABLE ASSEMBLIES AND FITTINGS FOR INDUSTRIAL CONTROL AND SIGNAL DISTRIBUTION |
|
UL 1563 : 6
|
ELECTRIC SPAS, EQUIPMENT ASSEMBLIES, AND ASSOCIATED EQUIPMENT |
|
UL 296A : 2
|
WASTE OIL-BURNING AIR-HEATING APPLIANCES |
|
UL 82 : 9
|
ELECTRIC GARDENING APPLIANCES |
|
CAN/CSA-C22.2 No. 62841-1 : 2015
|
ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
UL 514D : 2
|
COVER PLATES FOR FLUSH-MOUNTED WIRING DEVICES |
|
UL 2577 : 4
|
SUSPENDED CEILING POWER GRID SYSTEMS AND EQUIPMENT |
|
UL 541 : 9ED 2016
|
REFRIGERATED VENDING MACHINES |
|
UNE-EN ISO 15791-1:2014
|
Plastics - Development and use of intermediate-scale fire tests for plastics products - Part 1: General guidance (ISO 15791-1:2014) |
|
MIL I 15265 : C
|
INSULATION, ELECTRICAL, PLASTIC (SUBMARINE BUS BAR COVERING) |
|
BS EN 62149-6 : 2003
|
FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES - PERFORMANCE STANDARDS - PART 6: 650-NM 250-MBIT/S PLASTIC OPTICAL FIBRE TRANSCEIVER |
|
UL 583 : 2012
|
ELECTRIC-BATTERY-POWERED INDUSTRIAL TRUCKS |
|
UL 1482 : 7
|
SOLID-FUEL TYPE ROOM HEATERS |
|
UL 20 : 2013
|
GENERAL-USE SNAP SWITCHES |
|
BS EN 62680-2-3:2015
|
Universal Serial Bus interfaces for data and power Universal Serial Bus Cables and Connectors Class Document Revision 2.0 (TA 14) |
|
UL 1971 : 3
|
SIGNALING DEVICES FOR THE HEARING IMPAIRED |
|
UL 508 :18ED 2018
|
INDUSTRIAL CONTROL EQUIPMENT |
|
UL 1069 : 7ED 2007
|
HOSPITAL SIGNALING AND NURSE CALL EQUIPMENT |
|
UL 603 : 5
|
POWER SUPPLIES FOR USE WITH BURGLAR-ALARM SYSTEMS |
|
UL 563 : 8
|
ICE MAKERS |
|
UL 1090 : 7
|
ELECTRIC SNOW MOVERS |
|
09/30207398 DC : 0
|
BS ISO 7240-3 - FIRE DETECTION AND ALARM SYSTEMS - PART 3: AUDIBLE ALARM DEVICES |
|
UL 1283 : 7ED 2017
|
ELECTROMAGNETIC INTERFERENCE FILTERS |
|
UL 639 : 8ED 2007
|
INTRUSION-DETECTION UNITS |
|
UL 751 : 9ED 2016
|
VENDING MACHINES |
|
UL 961 : 5
|
ELECTRIC HOBBY AND SPORTS EQUIPMENT |
|
PD ISO/TR 14799-2:2005
|
Comparison of worldwide escalator and moving walk safety standards Abbreviated comparison and comments |
|
UL 325 : 7ED 2017-05
|
DOOR, DRAPERY, GATE, LOUVER, AND WINDOW OPERATORS AND SYSTEMS |
|
IEC 61189-2:2006
|
Test methods for electrical materials, printed boards and other interconnection structures and assemblies - Part 2: Test methods for materials for interconnection structures |
|
UL 8750 : 2
|
LIGHT EMITTING DIODE (LED) EQUIPMENT FOR USE IN LIGHTING PRODUCTS |
|
UL 3703 : 3
|
SOLAR TRACKERS |
|
12/30248102 DC : 0
|
BS EN 14604 - SMOKE ALARM DEVICES |
|
UL 73 : 2011
|
MOTOR-OPERATED APPLIANCES |
|
CSA C22.2 No. 104 : 2011 : INC : UPD 1 : 2016 : R201500
|
HUMIDIFIERS |
|
UL 60745-1 : 4
|
HAND-HELD MOTOR-OPERATED ELECTRIC TOOLS - SAFETY - PART 1: GENERAL REQUIREMENTS |
|
PD IEC/TS 62686-1:2015 (published 2015-04)
|
Process management for avionics. Electronic components for aerospace, defence and high performance (ADHP) applications General requirements for high reliability integrated circuits and discrete semiconductors |
|
UL 1773 : 5
|
TERMINATION BOXES |
|
CGA 2.29 : 1997 : R2010
|
HAND-HELD TORCHES FOR FUEL GASES |
|
UL 746C:7ED 2018-02
|
Polymeric Materials - Use in Electrical Equipment Evaluations |
|
ISO 15791-1:2014
|
Plastics Development and use of intermediate-scale fire tests for plastics products Part 1: General guidance |
|
PD IEC/PAS 61249-8-5:2014
|
Qualification and performance specification of permanent solder mask and flexible cover materials |
|
IEC 61010-2-201:2017 RLV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 2-201: Particular requirements for control equipment |
|
EN 62680-4 : 2014
|
UNIVERSAL SERIAL BUS INTERFACES FOR DATA AND POWER - PART 4: UNIVERSAL SERIAL BUS CABLES AND CONNECTORS CLASS DOCUMENT, REVISION 2.0 (IEC 62680-4:2013) |
|
EN 54-23:2010
|
Fire detection and fire alarm systems - Part 23: Fire alarm devices - Visual alarm devices |
|
A A 55509 : E
|
FUSE, INDICATOR ALARM |
|
ANSI INCITS 329 : 2000 : R2005
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE, 0.50 IN (12.65 MM), SERIAL SERPENTINE, 208-TRACK, 85 940 BPI (3383 BPMM), DLT 5 FORMAT |
|
ANSI INCITS 334 : 2000 : R2005
|
MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT |
|
ASTM F 712 : 2006 : R2011
|
Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers |
|
ANSI INCITS 265 : 1995 : R2006
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 36-TRACK, PARALLEL, 12.57 MM (0.495 IN), 1944 FTPMM (49378 FTPI) GROUP-CODED RECORDING |
|
ANSI INCITS 282 : 1996 : R2001
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128 TRACK, 62 500 BPI (2460 BPMM) DLT3 FORMAT |
|
ANSI INCITS 251 : 1995 : R2000
|
INFORMATION TECHNOLOGY - UNRECORDED MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.25 IN (6.35 MM), 20000 FTPI (787 FTPMM) COERCIVITY 550 OERSTEDS (44000 AMPERES/METER) (TYPES 6320, 6525, 6080, 6081) |
|
ANSI INCITS 334 : 2000 : R2015
|
MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE, 0.50 IN (12.65 MM) SERIAL SERPENTINE 128-TRACK, 62500 BPI (2460 BPMM) DLT3XT FORMAT |
|
EIA 315 : C 86
|
ROTARY SELECTOR SWITCH INDEXING, |
|
ANSI INCITS 265 : 1995 : R2001
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - UNRECORDED, 36-TRACK, PARALLEL, 12.57 MM (0.495 IN), 1944 FTPMM (49378 FTPI) GROUP-CODED RECORDING |
|
UL 773 : 5
|
PLUG-IN LOCKING TYPE PHOTOCONTROLS FOR USE WITH AREA LIGHTING |
|
ANSI INCITS 242 : 1994 : R2004
|
INFORMATION SYSTEMS - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE - 0.50 IN (12.65 MM), SERIAL SERPENTINE, 48-TRACK, 42 500 BPI (1673 BPMM) |
|
API SPEC 16F : 2017
|
SPECIFICATION FOR MARINE DRILLING RISER EQUIPMENT |
|
ASTM F 2468 : 2005
|
Standard Classification for Specifying Silicone Adhesives and Sealants for Transportation Applications |
|
ANSI INCITS 180 : 1990 : R2006
|
MAGNETIC TAPE AND CARTRIDGE FOR INFORMATION INTERCHANGE - 18-TRACK, PARALLEL, 1/2 INCH (12.65 MM), 37871 CPI (1491 CPMM), GROUP-CODED - REQUIREMENTS FOR RECORDING |
|
CSA FC 3 : 2004 : R2017
|
PORTABLE FUEL CELL POWER SYSTEMS |
|
CSA FC 3 : 2004
|
PORTABLE FUEL CELL POWER SYSTEMS |
|
ANSI INCITS 282 : 1996 : R2006
|
INFORMATION TECHNOLOGY - MAGNETIC TAPE CARTRIDGE FOR INFORMATION INTERCHANGE 0.50 IN (12.65 MM), SERIAL SERPENTINE, 128 TRACK, 62 500 BPI (2460 BPMM) DLT3 FORMAT |
|
UL 1030 : 8
|
SHEATHED HEATING ELEMENTS |
|
ANSI Z21.92 :2001
|
MANUALLY OPERATED ELECTRIC GAS IGNITION SYSTEMS AND COMPONENTS |
|
C22.2 NO. 243-17
|
Vacuum cleaners, blower cleaners, and household floor finishing machines (Binational standard with UL 1017) |
|
CSA C22.2 No. 27 :2009
|
BUSWAYS |
|
CSA C22.2 No. 18.1 : 2013 : INC : UPD 2 : 2017
|
METALLIC OUTLET BOXES |
|
C22.2 NO. 236-15
|
Heating and cooling equipment (Bi-national standard with UL 1995) |
|
UL 486C : 7ED 2018-01
|
Splicing Wire Connectors |
|
CSA C22.2 No. 18.3 : 2012 : INC : UPD 1 : 2014
|
CONDUIT, TUBING, AND CABLE FITTINGS |
|
CSA C22.2 No. 0.17 : 2000 : R2004
|
EVALUATION OF PROPERTIES OF POLYMERIC MATERIALS |
|
CAN/CSA-C22.2 NO. 60947-7-1:17
|
Low-voltage switchgear and controlgear ? Part 7-1: Ancillary equipment ? Terminal blocks for copper conductors (Trinational standard with NMX-J-538/7-1-ANCE and UL 60947-7-1) |
|
DSCC 86037 : B
|
CONNECTORS, RECEPTACLE, ELECTRICAL, LATCH HOUSINGS, CRIMP TO WIRE CONTACTS, GENERAL DRAWING FOR |
|
UL 917 : 2006
|
CLOCK-OPERATED SWITCHES |
|
CSA C22.2 No. 291 : 2014(R2019)
|
BARE AND COVERED FERRULES |
|
EIA 457 : 80(R1990)
|
DIGITAL SWITCHES, THUMBWHEEL, PUSHBUTTON AND LEVER ACTUATED, |
|
CSA C22.2 No. 282 : 2013
|
PLUGS, RECEPTACLES, AND COUPLERS FOR ELECTRIC VEHICLES |
|
IEEE C62.35:2010
|
STANDARD TEST METHODS FOR AVALANCHE JUNCTION SEMICONDUCTOR SURGE-PROTECTIVE DEVICE COMPONENTS |
|
CSA C22.2 No. 61010.1 : 2012 : FR
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
IEEE 420-2013
|
THE DESIGN AND QUALIFICATION OF CLASS 1E CONTROL BOARDS, PANELS, AND RACKS USED IN NUCLEAR POWER GENERATING STATIONS |
|
NFPA 496 : 2017
|
PURGED AND PRESSURIZED ENCLOSURES FOR ELECTRICAL EQUIPMENT |
|
CSA C22.2 NO. 42.1:13 (R2017)
|
Cover plates for flush-mounted wiring devices (Bi-national standard, with UL 514D) |
|
ISO 7240-23:2013
|
Fire detection and alarm systems Part 23: Visual alarm devices |
|
CSA C22.2 No. 18-4 : 2004 : R2013
|
HARDWARE FOR THE SUPPORT OF CONDUIT, TUBING, AND CABLE |
|
CSA C22.2 No. 61010.1 :2012
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
CSA C22.2 No. 62133 : 2017
|
SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES - SAFETY REQUIREMENTS FOR PORTABLE SEALED SECONDARY CELLS, AND FOR BATTERIES MADE FROM THEM, FOR USE IN PORTABLE APPLICATIONS |
|
SAE J 1773 : 2014
|
SAE ELECTRIC VEHICLE INDUCTIVELY COUPLED CHARGING |
|
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 :2016
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
ASTM F 968 : 1993 : R2002 : EDT 1
|
Standard Specification for Electrically Insulating Plastic Guard Equipment for Protection of Workers (Withdrawn 2008) |
|
ASTM D 8033 : 2016
|
Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials |
|
CSA C22.2 No. 153 : 2009 : R2014
|
ELECTRICAL QUICK-CONNECT TERMINALS |
|
ASTM D 7745 : 2011
|
Standard Practice for Testing Pultruded Composites |
|
ASTM D 5948 : 2005 : EDT 1
|
Standard Specification for Molding Compounds, Thermosetting |
|
CSA C22.2 No. 61010.1 : 2012 : INC : UPD 2 : 2016
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 1: GENERAL REQUIREMENTS |
|
CSA C22.2 No. 65 : 2013
|
WIRE CONNECTORS |
|
ASTM F 1021 : 1995 : R2007
|
Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines |
|
IEC 61010-2-201 REDLINE : 2ED 2017
|
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL, AND LABORATORY USE - PART 2-201: PARTICULAR REQUIREMENTS FOR CONTROL EQUIPMENT |
|
UL 514C : 4
|
NONMETALLIC OUTLET BOXES, FLUSH-DEVICE BOXES, AND COVERS |
|
IEEE C37.20.3 : 2013
|
METAL-ENCLOSED INTERRUPTER SWITCHGEAR (1 KV-38 KV) |
|
IEEE C62.34 : 1996
|
TEST METHODS AND PERFORMANCE OF LOW-VOLTAGE (1000 V RMS OR LESS) SURGE PROTECTIVE DEVICES USED ON SECONDARY DISTRIBUTION SYSTEMS (BETWEEN THE TRANSFORMER LOW-VOLTAGE TERMINALS AND THE LINE SIDE OF THE SERVICE EQUIPMENT) |
|
BS ISO 21848 : 2005
|
ROAD VEHICLES - ELECTRICAL AND ELECTRONIC EQUIPMENT FOR A SUPPLY VOLTAGE OF 42 V - ELECTRICAL LOADS |
|
IEC PAS 61249-8-1:2014
|
Qualification and performance of electrical insulating compound for printed wiring assemblies |
|
13/30295424 DC : 0
|
BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
|
IEC 61010-1:2010+AMD1:2016 CSV
|
Safety requirements for electrical equipment for measurement, control, and laboratory use - Part 1: General requirements |
|
02/124519 DC : DRAFT DEC 2002
|
EN 14598-2 - REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
|
BS EN 61189-2 : 2006
|
TEST METHODS FOR ELECTRICAL MATERIALS, PRINTED BOARDS AND OTHER INTERCONNECTION STRUCTURES AND ASSEMBLIES - PART 2: TEST METHODS FOR MATERIALS FOR INTERCONNECTION STRUCTURES |
|
PD ISO/TR 14799-1:2005
|
Comparison of worldwide escalator and moving walk safety standards Rule by rule comparison |
|
IPC 2221B:2012
|
GENERIC STANDARD ON PRINTED BOARD DESIGN |
|
MIL PRF 32383 : 0
|
BATTERIES, RECHARGEABLE, SEALED - GENERAL SPECIFICATION FOR |
|
IPC 2221 FRENCH : B2012
|
GENERIC STANDARD ON PRINTED BOARD DESIGN |