UNE-EN ISO 604:2003
|
Plastics - Determination of compressive properties (ISO 604:2002) |
UNE-EN ISO 12236:2007
|
Geosynthetics - Static puncture test (CBR test) (ISO 12236:2006) |
UNE-EN 197-1:2011
|
Cement - Part 1: Composition, specifications and conformity criteria for common cements |
UNE-EN ISO 9862:2005
|
Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) |
UNE-EN 13948:2008
|
Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of resistance to root penetration |
UNE-ISO 4593:2010
|
Plastics -- Film and sheeting -- Determination of thickness by mechanical scanning |
ISO 10320:1999
|
Geotextiles and geotextile-related products Identification on site |
ISO 12236:2006
|
Geosynthetics — Static puncture test (CBR test) |
UNE-ISO 34-1:2011
|
Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescent test pieces |
UNE 104304:2015
|
Synthetic materials. Application. Determination of peel resistance of joints between installed waterproofing synthetic sheets |
UNE-EN 495-5:2013
|
Flexible sheets for waterproofing - Determination of foldability at low temperature - Part 5: Plastic and rubber sheets for roof waterproofing |
UNE-EN ISO 11925-2:2011
|
Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO 11925-2:2010) |
ISO 10319:2015
|
Geosynthetics — Wide-width tensile test |
UNE 80303-2:2011
|
Cements with additional characteristics. Part 2: Sea water resisting cements. |
UNE 80303-1:2013
|
Cements with additional characteristics. Part 1: Sulphate resisting cements. |
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
UNE 104305:2000
|
Sinthetic materials. Determination of relative inflamability for waterproofing synthetic sheets. |
UNE-EN 1107-2:2001
|
Flexible sheets for waterproofing - Determination of dimensional stability - Part 2: Plastic and rubber sheets for roof waterproofing. |
ISO 846:1997
|
Plastics Evaluation of the action of microorganisms |
UNE-EN 14575:2007
|
Geosynthetic barriers - Screening test method for determining the resistance to oxidation |
ISO 9862:2005
|
Geosynthetics — Sampling and preparation of test specimens |
UNE-EN 1849-2:2010
|
Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets |
ISO 13433:2006
|
Geosynthetics — Dynamic perforation test (cone drop test) |
UNE-EN ISO 527-3:1996
|
Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995) |
UNE-EN 13956:2013
|
Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics |
UNE-EN ISO 13433:2007
|
Geosynthetics - Dynamic perforation test (cone drop test) (ISO 13433:2006) |
UNE 83607:1994 IN
|
QHOTCRETE. GENERAL RECOMENDATIONS. |
ISO 604:2002
|
Plastics — Determination of compressive properties |
ISO 12958:2010
|
Geotextiles and geotextile-related products Determination of water flow capacity in their plane |
UNE-EN 12224:2001
|
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF THE RESISTANCE TO WEATHERING. |
UNE 104481-3-2:2010
|
Test methods for membranes for waterproofing. Part: 3-2: Test for watertightness of waterproofing sheet joints using the pressure air method |
UNE-EN ISO 846:1998
|
Plastics - Evaluation of the action of microorganisms (ISO 846:1997) |
UNE-EN 13256:2017
|
Geotextiles and geotextile-related products - Characteristics required for use in the construction of tunnels and underground structures |
UNE-EN ISO 10319:2015
|
Geosynthetics - Wide-width tensile test (ISO 10319:2015) |
UNE-EN 13719:2017
|
Geosynthetics - Determination of the long term protection efficiency of geosynthetics in contact with geosynthetic barriers |
UNE-EN ISO 10320:1999
|
GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - IDENTIFICATION ON SITE (ISO 10320:1999) |
UNE-EN ISO 527-1:1996
|
PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 1: GENERAL PRINCIPLES (ISO 527-1:1993 INCLUDING CORR 1:1994). |
UNE 80305:2012
|
White cements. |
ISO 527-3:1995
|
Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
UNE-EN ISO 12958:2010
|
Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010) |
UNE 80307:2001
|
Cements for special uses. |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |