EN ISO 14284:2002
|
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
EN 10048:1996
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
EN ISO 9445-2:2010
|
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and plate/sheet (ISO 9445-2:2009) |
ISO 9444-2:2009
|
Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate |
EN 10079:2007
|
Definition of steel products |
CEN/TR 10261:2013
|
Iron and steel - European standards for the determination of chemical composition |
EN ISO 6892-1:2016
|
Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016) |
EN 10028-3:2017
|
Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized |
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
EN 10164:2004
|
Steel products with improved deformation properties perpendicular to the surface of the product - Technical delivery conditions |
EN 10028-6:2017
|
Flat products made of steels for pressure purposes - Part 6: Weldable fine grain steels, quenched and tempered |
EN ISO 377:2017
|
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
ISO 2566-2:1984
|
Steel Conversion of elongation values Part 2: Austenitic steels |
EN ISO 9444-2:2010
|
Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) |
EN ISO 9445-1:2010
|
Continuously cold-rolled stainless steel - Tolerances on dimensions and form - Part 1: Narrow strip and cut lengths (ISO 9445-1:2009) |
ISO 6892-1:2016
|
Metallic materials Tensile testing Part 1: Method of test at room temperature |
EN ISO 18286:2010
|
Hot-rolled stainless steel plates - Tolerances on dimensions and shape (ISO 18286:2008) |
EN 10168:2004
|
Steel products - Inspection documents - List of information and description |
EN ISO 2566-1:1999
|
Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) |
EN 764-5:2014
|
Pressure equipment - Part 5: Inspection documentation of metallic materials and compliance with the material specification |
EN 10028-2:2017
|
Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties |
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
ISO 148-1:2016
|
Metallic materials — Charpy pendulum impact test — Part 1: Test method |
EN 10163-2:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
EN 10028-5:2017
|
Flat products made of steels for pressure purposes - Part 5: Weldable fine grain steels, thermomechanically rolled |
ISO 9445-2:2009
|
Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and plate/sheet |
EN 10021:2006
|
General technical delivery conditions for steel products |
ISO 9444-1:2009
|
Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths |
ISO 3651-2:1998
|
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
ISO 2566-1:1984
|
Steel Conversion of elongation values Part 1: Carbon and low alloy steels |
EN ISO 2566-2:1999
|
Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) |
EN 10204:2004
|
Metallic products - Types of inspection documents |
EN 10307:2001
|
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
EN ISO 6892-2:2011
|
Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) |
EN ISO 3651-2 : 1998
|
DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
ISO 6892-2:2011
|
Metallic materials Tensile testing Part 2: Method of test at elevated temperature |
EN 10020:2000
|
Definition and classification of grades of steel |
EN ISO 148-1:2016
|
Metallic materials - Charpy pendulum impact test - Part 1: Test method (ISO 148-1:2016) |
ISO 18286:2008
|
Hot-rolled stainless steel plates — Tolerances on dimensions and shape |
ISO 9445-1:2009
|
Continuously cold-rolled stainless steel Tolerances on dimensions and form Part 1: Narrow strip and cut lengths |
EN 10160:1999
|
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
EN 10028-4:2017
|
Flat products made of steels for pressure purposes - Part 4: Nickel alloy steels with specified low temperature properties |
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
ISO 14284:1996
|
Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |