|
ISO 580:2005
|
Plastics piping and ducting systems — Injection-moulded thermoplastics fittings — Methods for visually assessing the effects of heating |
|
EN 12095:1997
|
Plastics piping systems - Brackets for rainwater piping systems - Test method for bracket strength |
|
EN ISO 3126:2005
|
Plastics piping systems - Plastics components - Determination of dimensions (ISO 3126:2005) |
|
EN 14814:2016
|
Adhesives for thermoplastic piping systems for fluids under pressure - Specifications |
|
EN 612:2005
|
Eaves gutters with bead stiffened fronts and rainwater pipes with seamed joints made of metal sheet |
|
ISO 6259-2:1997
|
Thermoplastics pipes Determination of tensile properties Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI) |
|
EN ISO 13229:2011
|
Thermoplastics piping systems for non-pressure applications - Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings - Determination of the viscosity number and K-value (ISO 13229:2010) |
|
EN ISO 8256:2004
|
Plastics - Determination of tensile-impact strength (ISO 8256:2004) |
|
ISO 13229:2010
|
Thermoplastics piping systems for non-pressure applications Unplasticized poly(vinyl chloride) (PVC-U) pipes and fittings Determination of the viscosity number and K-value |
|
EN 681-1:1996/A3:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 1: VULCANIZED RUBBER |
|
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
|
EN ISO 4892-3:2016
|
Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2016) |
|
ISO 3127:1994
|
Thermoplastics pipes — Determination of resistance to external blows — Round-the-clock method |
|
EN 15346:2014
|
Plastics - Recycled plastics - Characterization of poly(vinyl chloride) (PVC) recyclates |
|
EN 607:2004
|
Eaves gutters and fittings made of PVC-U - Definitions, requirements and testing |
|
CEN/TS 12200-2:2017
|
Plastics rainwater piping systems for above ground external use - Unplasticized poly(vinyl chloride) (PVC-U) - Part 2: Guidance for the assessment of conformity |
|
ISO 8256:2004
|
Plastics — Determination of tensile-impact strength |
|
EN 1462:2004
|
Brackets for eaves gutters - Requirements and testing |
|
EN 681-2:2000/A2:2005
|
ELASTOMERIC SEALS - MATERIALS REQUIREMENTS FOR PIPE JOINT SEALS USED IN WATER AND DRAINAGE APPLICATIONS - PART 2: THERMOPLASTIC ELASTOMERS |
|
EN 14680:2015
|
Adhesives for non-pressure thermoplastics piping systems - Specifications |
|
ISO 3126:2005
|
Plastics piping systems Plastics components Determination of dimensions |
|
EN 476:2011
|
General requirements for components used in drains and sewers |
|
ISO 4892-3:2016
|
Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps |
|
CEN ISO/TR 27165:2012
|
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes (ISO/TR 27165:2012) |
|
EN 752:2017
|
Drain and sewer systems outside buildings - Sewer system management |
|
EN ISO 580:2005
|
Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005) |
|
ISO 306:2013
|
Plastics — Thermoplastic materials — Determination of Vicat softening temperature (VST) |
|
ISO 4892-2:2013
|
Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
|
EN 20105-A02 : 1994
|
TEXTILES - TESTS FOR COLOUR FASTNESS - PART A02: GREYSCALE FOR ASSESSING CHANGE IN COLOUR (ISO 105-A02:1993) |
|
EN 1905:1998
|
Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content |
|
ISO 105-A02:1993
|
Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
|
EN ISO 2505:2005
|
Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005) |
|
EN 12056-3:2000
|
Gravity drainage systems inside buildings - Part 3: Roof drainage, layout and calculation |
|
ISO/TR 27165:2012
|
Thermoplastics piping systems - Guidance for definitions of wall constructions for pipes |
|
ISO 13254:2010
|
Thermoplastics piping systems for non-pressure applications Test method for watertightness |
|
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
|
EN ISO 306:2013
|
Plastics - Thermoplastic materials - Determination of Vicat softening temperature (VST) (ISO 306:2013) |
|
EN ISO 4892-2:2013
|
Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) |
|
EN 513:1999
|
Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering |
|
EN ISO 472:2013
|
Plastics - Vocabulary (ISO 472:2013) |
|
CEN/TS 14541:2013
|
Plastics pipes and fittings - Characteristics for utilisation of non-virgin PVC-U, PP and PE materials |
|
ISO 2505:2005
|
Thermoplastics pipes — Longitudinal reversion — Test method and parameters |