|
ISO 13855:2010
|
Safety of machinery Positioning of safeguards with respect to the approach speeds of parts of the human body |
|
EN 746-1:1997+A1:2009
|
Industrial thermoprocessing equipment - Part 1: Common safety requirements for industrial thermoprocessing equipment |
|
EN 61508-3:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements |
|
EN 1037:1995+A1:2008
|
Safety of machinery - Prevention of unexpected start-up |
|
ISO 8421-3:1989
|
Fire protection Vocabulary Part 3: Fire detection and alarm |
|
EN 15089:2009
|
Explosion isolation systems |
|
ISO 14119:2013
|
Safety of machinery Interlocking devices associated with guards Principles for design and selection |
|
ISO 14122-3:2016
|
Safety of machinery — Permanent means of access to machinery — Part 3: Stairs, stepladders and guard-rails |
|
EN 981:1996+A1:2008
|
Safety of machinery - System of auditory and visual danger and information signals |
|
EN 60079-0:2012/A11:2013
|
EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS (IEC 60079-0:2011, MODIFIED) |
|
ISO 10218-1:2011
|
Robots and robotic devices Safety requirements for industrial robots Part 1: Robots |
|
EN 14373:2005
|
Explosion suppression systems |
|
EN ISO 20344:2011
|
Personal protective equipment - Test methods for footwear (ISO 20344:2011) |
|
IEC 60079-17:2013
|
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
|
EN 13463-1:2009
|
Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirements |
|
EN 13478:2001+A1:2008
|
Safety of machinery - Fire prevention and protection |
|
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
|
IEC 60079-18:2014 RLV
|
Explosive atmospheres - Part 18: Equipment protection by encapsulation “m” |
|
EN ISO 13850:2015
|
Safety of machinery - Emergency stop function - Principles for design (ISO 13850:2015) |
|
EN 14797:2006
|
Explosion venting devices |
|
EN 12635:2002+A1:2008
|
Industrial, commercial and garage doors and gates - Installation and use |
|
EN 12978:2003+A1:2009
|
Industrial, commercial and garage doors and gates - Safety devices for power operated doors and gates - Requirements and test methods |
|
EN 60079-10-2:2015
|
Explosive atmospheres - Part 10-2: Classification of areas - Explosive dust atmospheres |
|
EN 13237:2012
|
Potentially explosive atmospheres - Terms and definitions for equipment and protective systems intended for use in potentially explosive atmospheres |
|
IEC 61508-3:2010
|
Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements (see Functional Safety and IEC 61508) |
|
EN 14491:2012
|
Dust explosion venting protective systems |
|
EN 13501-2:2016
|
Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services |
|
EN ISO 13857:2008
|
Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower limbs (ISO 13857:2008) |
|
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN |
|
ISO 12100:2010
|
Safety of machinery — General principles for design — Risk assessment and risk reduction |
|
ISO 14122-4:2016
|
Safety of machinery — Permanent means of access to machinery — Part 4: Fixed ladders |
|
ISO/TR 14121-2:2012
|
Safety of machinery — Risk assessment — Part 2: Practical guidance and examples of methods |
|
EN 14986:2017
|
Design of fans working in potentially explosive atmospheres |
|
EN 12445:2000
|
Industrial, commercial and garage doors and gates - Safety in use of power operated doors - Test methods |
|
EN 1570-1:2011+A1:2014
|
Safety requirements for lifting tables - Part 1: Lifting tables serving up to two fixed landings |
|
EN 60079-11:2012
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
|
IEC 60079-11:2011
|
Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
|
EN ISO 13855:2010
|
Safety of machinery - Positioning of safeguards with respect to the approach speeds of parts of the human body (ISO 13855:2010) |
|
EN 619:2002+A1:2010
|
Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads |
|
EN ISO 14122-3:2016
|
Safety of machinery - Permanent means of access to machinery - Part 3: Stairs, stepladders and guard-rails (ISO 14122-3:2016) |
|
IEC 61340-4-1:2003+AMD1:2015 CSV
|
Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors |
|
EN 61496-1:2013/AC:2015
|
SAFETY OF MACHINERY - ELECTRO-SENSITIVE PROTECTIVE EQUIPMENT - PART 1: GENERAL REQUIREMENTS AND TESTS (IEC 61496-1:2012) |
|
EN 60079-25:2010/AC:2013
|
EXPLOSIVE ATMOSPHERES - PART 25: INTRINSICALLY SAFE ELECTRICAL SYSTEMS (IEC 60079-25:2010) |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
|
EN 50050-3:2013
|
Electrostatic hand-held spraying equipment - Safety requirements - Part 3: Hand-held spraying equipment for ignitable flock |
|
IEC 60079-25:2010
|
Explosive atmospheres - Part 25: Intrinsically safe electrical systems |
|
EN ISO 14122-4:2016
|
Safety of machinery - Permanent means of access to machinery - Part 4: Fixed ladders (ISO 14122-4:2016) |
|
EN 62061:2005/A2:2015
|
SAFETY OF MACHINERY - FUNCTIONAL SAFETY OF SAFETY-RELATED ELECTRICAL, ELECTRONIC AND PROGRAMMABLE ELECTRONIC CONTROL SYSTEMS (IEC 62061:2005/A2:2015) |
|
EN ISO 14122-2:2016
|
Safety of machinery - Permanent means of access to machinery - Part 2: Working platforms and walkways (ISO 14122-2:2016) |
|
IEC 60079-0:2011
|
Explosive atmospheres - Part 0: Equipment - General requirements |
|
EN ISO 10218-1:2011
|
Robots and robotic devices - Safety requirements for industrial robots - Part 1: Robots (ISO 10218-1:2011) |
|
EN 61340-4-1:2004/A1:2015
|
ELECTROSTATICS - PART 4-1: STANDARD TEST METHODS FOR SPECIFIC APPLICATIONS - ELECTRICAL RESISTANCE OF FLOOR COVERINGS AND INSTALLED FLOORS (IEC 61340-4-1:2003/A1:2015) |
|
ISO 13857:2008
|
Safety of machinery Safety distances to prevent hazard zones being reached by upper and lower limbs |
|
EN ISO 14119:2013
|
Safety of machinery - Interlocking devices associated with guards - Principles for design and selection (ISO 14119:2013) |
|
IEC 61496-1:2012
|
Safety of machinery - Electro-sensitive protective equipment - Part 1: General requirements and tests |
|
IEC 60079-14:2013
|
Explosive atmospheres - Part 14: Electrical installations design, selection and erection |
|
EN ISO 12100:2010
|
Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
|
EN 12981:2005+A1:2009
|
Coating plants - Spray booths for application of organic powder coating material - Safety requirements |
|
EN 60079-14:2014/AC:2016
|
EXPLOSIVE ATMOSPHERES - PART 14: ELECTRICAL INSTALLATIONS DESIGN, SELECTION AND ERECTION (IEC 60079-14:2013/COR1:2016) |
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
|
ISO 13850:2015
|
Safety of machinery Emergency stop function Principles for design |
|
EN 60079-17:2014
|
Explosive atmospheres - Part 17: Electrical installations inspection and maintenance |
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
|
IEC 62061:2005+AMD1:2012+AMD2:2015 CSV
|
Safety of machinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems |
|
EN 1149-5:2008
|
Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements |
|
EN 61496-2:2013
|
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
|
ISO 14122-2:2016
|
Safety of machinery — Permanent means of access to machinery — Part 2: Working platforms and walkways |
|
EN 1081:1998
|
Resilient floor coverings - Determination of the electrical resistance |
|
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
|
ISO/TR 11688-2:1998
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
|
EN 14462:2015
|
Surface treatment equipment - Noise test code for surface treatment equipment including its ancillary handling equipment - Accuracy grades 2 and 3 |
|
IEC 61496-2:2013
|
Safety of machinery - Electro-sensitive protective equipment - Part 2: Particular requirements for equipment using active opto-electronic protective devices (AOPDs) |
|
ISO 20344:2011
|
Personal protective equipment Test methods for footwear |
|
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |