|
EN ISO 4287:1998/A1:2009
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - TERMS, DEFINITIONS AND SURFACE TEXTURE PARAMETERS |
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
ASTM D 892 : 2013-07
|
TEST METHOD FOR FOAMING CHARACTERISTICS OF LUBRICATING OILS |
|
ISO 4287:1997
|
Geometrical Product Specifications (GPS) — Surface texture: Profile method — Terms, definitions and surface texture parameters |
|
ISO 1328-2:1997
|
Cylindrical gears ISO system of accuracy Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information |
|
ISO/TR 13593:1999
|
Enclosed gear drives for industrial applications |
|
DIN 3990-4:1987-12
|
CALCULATION OF LOAD CAPACITY OF CYLINDRICAL GEARS; CALCULATION OF SCUFFING LOAD CAPACITY |
|
ISO 6336-2:2006
|
Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
|
ISO 13357-1:2017
|
Petroleum products — Determination of the filterability of lubricating oils — Part 1: Procedure for oils in the presence of water |
|
ASTM D 665 : 2014-11
|
TEST METHOD FOR RUST-PREVENTING CHARACTERISTICS OF INHIBITED MINERAL OIL IN THE PRESENCE OF WATER |
|
ISO 14635-1:2000
|
Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
|
ISO 11007:1997
|
Petroleum products and lubricants Determination of rust-prevention characteristics of lubricating greases |
|
EN ISO 4288 : 1997
|
GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - RULES AND PROCEDURES FOR THE ASSESSMENT OF SURFACE TEXTURE |
|
EN 61400-3:2009
|
Wind turbines - Part 3: Design requirements for offshore wind turbines |
|
ISO 14104:2017
|
Gears — Surface temper etch inspection after grinding, chemical method |
|
ISO 7120:1987
|
Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
|
ISO 1328-1:2013
|
Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
|
ISO 8579-2:1993
|
Acceptance code for gears Part 2: Determination of mechanical vibrations of gear units during acceptance testing |
|
ISO 5593:1997
|
Rolling bearings Vocabulary |
|
ISO 2394:2015
|
General principles on reliability for structures |
|
DIN 51819-1:2016-12
|
TESTING OF LUBRICANTS - MECHANICAL-DYNAMIC TESTING IN THE ROLLER BEARING TEST APPARATUS FE8 - PART 1: GENERAL WORKING PRINCIPLES |
|
IEC TS 61400-13:2001
|
Wind turbine generator systems - Part 13: Measurement of mechanical loads |
|
DIN 471:2011-04
|
RETAINING RINGS FOR SHAFTS - NORMAL TYPE AND HEAVY TYPE |
|
ISO/TR 13989-1:2000
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 1: Flash temperature method |
|
DIN 472:2016-10 (Draft)
|
RETAINING RINGS FOR BORES - NORMAL TYPE AND HEAVY TYPE |
|
DIN 7190:2001-02
|
INTERFERENCE FITS - CALCULATION AND DESIGN RULES |
|
ISO 6336-3:2006
|
Calculation of load capacity of spur and helical gears Part 3: Calculation of tooth bending strength |
|
ISO 2160:1998
|
Petroleum products Corrosiveness to copper Copper strip test |
|
AGMA 6001 : D
|
DESIGN AND SELECTION OF COMPONENTS FOR ENCLOSED GEAR DRIVES |
|
ISO/TR 13989-2:2000
|
Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears Part 2: Integral temperature method |
|
ISO 281:2007
|
Rolling bearings Dynamic load ratings and rating life |
|
ISO 13226:2011
|
Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
|
DIN 51517-3:2014-02
|
LUBRICANTS - LUBRICATING OILS - PART 3: LUBRICATING OILS CLP, MINIMUM REQUIREMENTS |
|
EN 61400-1:2005/A1:2010
|
WIND TURBINES - PART 1: DESIGN REQUIREMENTS |
|
ISO/TR 15144-1:2014
|
Calculation of micropitting load capacity of cylindrical spur and helical gears Part 1: Introduction and basic principles |
|
ISO 6336-5:2016
|
Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
|
ISO 14635-2:2004
|
Gears — FZG test procedures — Part 2: FZG step load test A10/16, 6R/120 for relative scuffing load-carrying capacity of high EP oils |
|
ISO/TR 10064-3:1996
|
Code of inspection practice Part 3: Recommendations relative to gear blanks, shaft centre distance and parallelism of axes |
|
ISO 13357-2:2017
|
Petroleum products — Determination of the filterability of lubricating oils — Part 2: Procedure for dry oils |
|
AGMA 925 : A
|
EFFECT OF LUBRICATION ON GEAR SURFACE DISTRESS |
|
IEC 61400-22:2010
|
Wind turbines - Part 22: Conformity testing and certification |
|
ISO/TR 1281-2:2008
|
Rolling bearings Explanatory notes on ISO 281 Part 2: Modified rating life calculation, based on a systems approach to fatigue stresses |
|
IEC 61400-3:2009
|
Wind turbines - Part 3: Design requirements for offshore wind turbines |
|
AGMA 9005 : E
|
INDUSTRIAL GEAR LUBRICATION |
|
ISO 10474:2013
|
Steel and steel products — Inspection documents |
|
EN 10204:2004
|
Metallic products - Types of inspection documents |
|
EN 12680-3:2011
|
Founding - Ultrasonic testing - Part 3: Spheroidal graphite cast iron castings |
|
ISO 21771:2007
|
Gears — Cylindrical involute gears and gear pairs — Concepts and geometry |
|
ISO 6336-1:2006
|
Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
|
ISO 5725-2:1994
|
Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
|
ISO/TR 1281-1:2008
|
Rolling bearings Explanatory notes on ISO 281 Part 1: Basic dynamic load rating and basic rating life |
|
SAE FATIGUE DESIGN HDBK : 3ED 1997
|
FATIGUE DESIGN HANDBOOK AE-22 |
|
ISO 12925-1:1996
|
Lubricants, industrial oils and related products (class L) Family C (Gears) Part 1: Specifications for lubricants for enclosed gear systems |
|
ISO 16889:2008
|
Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element |
|
ISO 6336-6:2006
|
Calculation of load capacity of spur and helical gears Part 6: Calculation of service life under variable load |
|
DIN 6892:2012-08
|
Drive type fastenings without taper action - Parallel keys - Calculation and design |
|
ISO 10825:1995
|
Gears — Wear and damage to gear teeth — Terminology |
|
ISO 8579-1:2002
|
Acceptance code for gear units — Part 1: Test code for airborne sound |
|
EN 61400-22:2011
|
Wind turbines - Part 22: Conformity testing and certification |
|
ISO 12107:2012
|
Metallic materials — Fatigue testing — Statistical planning and analysis of data |
|
IEC 61400-1:2005+AMD1:2010 CSV
|
Wind turbines - Part 1: Design requirements |
|
ISO 76:2006
|
Rolling bearings Static load ratings |
|
ISO/TS 16281:2008
|
Rolling bearings Methods for calculating the modified reference rating life for universally loaded bearings |
|
ISO 15243:2017
|
Rolling bearings — Damage and failures — Terms, characteristics and causes |
|
DIN 45667:1969-10
|
CLASSIFICATION METHODS FOR EVALUATION OF RANDOM VIBRATIONS |