Skip to content
Please enter a keyword to search

  • UNE-EN 89:2016

    Current The latest, up-to-date edition.

    Gas-fired storage water heaters for the production of domestic hot water

    Available format(s):  Hardcopy, PDF

    Language(s):  Spanish, Castilian, English

    Published date:  20-04-2016

    Publisher:  Asociacion Espanola de Normalizacion

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Classification of storage water heaters
          4.1 Classification of gases
          4.2 Appliance categories
          4.3 Mode of supply of the combustion air and
                 evacuation of the combustion products
                 (appliance types)
    5 Marking and instructions
          5.1 Appliance marking
          5.2 Instructions
          5.3 Presentation
    6 Constructional requirement
          6.1 General
          6.2 Adjusting, control and safety devices
          6.3 Main burner
          6.4 Discharge of condensate
    7 Operational requirements
          7.1 Carrying out the tests
          7.2 Soundness
          7.3 Heat inputs
          7.4 Temperature of the control knobs
          7.5 Temperature of the adjusting, control and safety
                 devices
          7.6 Limit temperature of the walls and the test
                 panels
          7.7 Ignition - Cross-lighting - Flame stability
          7.8 Temperature of combustion products in condensing
                 appliances
          7.9 Adjusting, control and safety devices
          7.10 Repeated draw-off
          7.11 Nominal capacity
          7.12 Combustion
          7.13 Non-condensation in the flue (Type B appliances)
          7.14 Formation of condensate (in the case of
                 condensing appliances)
          7.15 Prepurging
          7.16 Air monitoring device
    8 Rationale use of energy
          8.1 Efficiency
          8.2 Maintenance consumption
    9 Fitness for purpose
          9.1 Heating-up time
          9.2 Mixing factor of the water temperature in the
                 appliance
          9.3 Draw-off limits causing operation of the burner
          9.4 Continuous draw-off
          9.5 Specific rate
    Annex A (informative) National situations
    Annex B (normative) Test apparatus for Type C11 appliances
                        (see 7.7.2.2.2.1)
    Annex C (normative) Test apparatus for Type C21 appliances
                        (see 7.7.2.2.2.2)
    Annex D (informative) Examples of composition of the gas
                          circuit
    Annex E (normative) Soundness test - Volumetric method
    Annex F (informative) Guidelines for extension to other
                          categories
    Annex G (informative) Protection against electric shock for
                          high voltage ignition devices
                          (see 6.1.10)
    Annex H (informative) Examples of marking on the appliance
    Annex J (normative) Marking on the appliance and its
                        packaging - Explicit identification of
                        gas types following the use declared by
                        the countries in their official
                        language(s)
    Annex K (informative) A-deviations
    Annex L (normative) Special national conditions
    Annex ZA (informative) Clauses of this European Standard
                           addressing essential requirements or
                           other provisions of EU Directives

    Abstract - (Show below) - (Hide below)

    Gives specifications and test procedures for construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage domestic water heaters.

    General Product Information - (Show below) - (Hide below)

    Committee CTN 60
    Document Type Standard
    Publisher Asociacion Espanola de Normalizacion
    Status Current
    Supersedes
    Under Revision

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1859:2009+A1:2013 Chimneys - Metal chimneys - Test methods
    IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
    IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
    EN ISO 8256:2004 Plastics - Determination of tensile-impact strength (ISO 8256:2004)
    EN 1057:2006+A1:2010 Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
    ISO 815-1:2014 Rubber, vulcanized or thermoplastic Determination of compression set Part 1: At ambient or elevated temperatures
    EN 1490:2000 Building valves - Combined temperature and pressure relief valves - Tests and requirements
    EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    EN ISO 527-2:2012 Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012)
    EN 13203-1:2015 Gas fired domestic appliances producing hot water - Part 1: Assessment of performance of hot water deliveries
    EN 13216-1:2004 Chimneys - Test methods for system chimneys - Part 1: General test methods
    ISO 188:2011 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
    EN 13203-2:2015 Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
    EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
    ISO 8256:2004 Plastics — Determination of tensile-impact strength
    EN ISO 3166-1:2014 Codes for the representation of names of countries and their subdivisions - Part 1: Country codes (ISO 3166-1:2013)
    EN ISO 527-1:2012 Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012)
    EN ISO 179-1:2010 Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test (ISO 179-1:2010)
    EN 161:2011+A3:2013 Automatic shut-off valves for gas burners and gas appliances
    ISO 527-2:2012 Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics
    EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    EN 14241-1:2013 Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners
    ISO 1183:1987 Plastics Methods for determining the density and relative density of non-cellular plastics
    ISO 262:1998 ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts
    EN 14459:2015 Safety and control devices for burners and appliances burning gaseous or liquid fuels - Control functions in electronic systems - Methods for classification and assessment
    EN 1487:2014 Building valves - Hydraulic safety groups - Tests and requirements
    EN 437:2003+A1:2009 Test gases - Test pressures - Appliance categories
    EN 125:2010+A1:2015 Flame supervision devices for gas burning appliances - Thermoelectric flame supervision devices
    ISO 7619:1997 Rubber Determination of indentation hardness by means of pocket hardness meters
    EN 126:2012 Multifunctional controls for gas burning appliances
    EN 13611:2015/AC:2016 SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS
    CEN/TR 1749:2014 European scheme for the classification of gas appliances according to the method of evacuation of the combustion products (types)
    CR 1404:1994 Determination of emissions from appliances burning gaseous fuels during type-testing
    EN ISO 9969:2016 Thermoplastics pipes - Determination of ring stiffness (ISO 9969:2016)
    EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
    ISO 6914:2013 Rubber, vulcanized or thermoplastic Determination of ageing characteristics by measurement of stress relaxation in tension
    EN 14471:2013+A1:2015 CHIMNEYS - SYSTEM CHIMNEYS WITH PLASTIC FLUE LINERS - REQUIREMENTS AND TEST METHODS
    ISO 179-1:2010 Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test
    ISO 3166-1:2013 Codes for the representation of names of countries and their subdivisions Part 1: Country codes
    EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    ISO 37:2017 Rubber, vulcanized or thermoplastic — Determination of tensile stress-strain properties
    EN 298:2012 Automatic burner control systems for burners and appliances burning gaseous or liquid fuels
    EN 1856-1:2009 Chimneys - Requirements for metal chimneys - Part 1: System chimney products
    EN 549:1994 Rubber materials for seals and diaphragms for gas appliances and gas equipment
    ISO 301:2006 Zinc alloy ingots intended for castings
    EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    ISO 178:2010 Plastics Determination of flexural properties
    ISO 9969:2016 Thermoplastics pipes Determination of ring stiffness
    EN 513:1999 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering
    EN 88-1:2011+A1:2016 Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    EN 573-1:2004 Aluminium and aluminium alloys - Chemical composition and form of wrought products - Part 1: Numerical designation system
    ISO 527-1:2012 Plastics Determination of tensile properties Part 1: General principles
    ISO 1817:2015 Rubber, vulcanized or thermoplastic Determination of the effect of liquids
    EN 10088-1:2014 Stainless steels - Part 1: List of stainless steels
    ISO 2781:2008 Rubber, vulcanized or thermoplastic Determination of density
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective