|
UNI EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
|
UNI EN 10346 : 2009
|
CONTINUOUSLY HOT-DIP COATED STEEL FLAT PRODUCTS FOR COLD FORMING - TECHNICAL DELIVERY CONDITIONS |
|
UNI EN 10025-6 : 2009
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 6: TECHNICAL DELIVERY CONDITIONS FOR FLAT PRODUCTS OF HIGH YIELD STRENGTH STRUCTURAL STEELS IN THE QUENCHED AND TEMPERED CONDITION |
|
CEI EN 62305-1 : 2013
|
PROTECTION AGAINST LIGHTNING - PART 1: GENERAL PRINCIPLES |
|
UNI EN 10025-3 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR NORMALIZED/NORMALIZED ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
UNI 9308-1 : 1988
|
DISCONTINUOUS ROOFING - DESIGN CRITERIA - WATER-PROOFING ELEMENT |
|
UNI EN 13984 : 2013
|
FLEXIBLE SHEETS FOR WATERPROOFING - PLASTIC AND RUBBER VAPOUR CONTROL LAYERS - DEFINITIONS AND CHARACTERISTICS |
|
UNI 9299 : 1988
|
MINERAL FIBER - SEMI-RIGID MINERAL FIBER PANEL FOR THERMAL MATTERS - ACCEPTANCE CRITERIA |
|
UNI EN 13169 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED PERLITE BOARD (EPB) PRODUCTS - SPECIFICATION |
|
UNI 8625-1 : 1984
|
EDILIZIA. PROVE DI COPERTURE DISCONTINUE. DETERMINAZIONE DELLA PERMEABILITA ALL'ACQUA. |
|
CEI EN 62305-4 : 2013
|
PROTECTION CONTRE LA FOUDRE - PARTIE 4: RESEAUX DE PUISSANCE ET DE COMMUNICATION DANS LES STRUCTURES |
|
UNI EN 14308 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
|
UNI EN 14306 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
|
UNI 11035-2 : 2010
|
STRUCTURAL TIMBER - VISUAL STRENGTH GRADING FOR STRUCTURAL TIMBERS - PART 2: VISUAL STRENGTH GRADING RULES AND CHARACTERISTICS VALUES FOR STRUCTURAL TIMBER POPULATION |
|
UNI EN 14933 : 2008
|
THERMAL INSULATION AND LIGHT WEIGHT FILL PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
|
UNI EN 13162 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
|
UNI 11035-1 : 2010
|
STRUCTURAL TIMBER - VISUAL STRENGTH GRADING FOR STRUCTURAL TIMBERS - PART 1: TERMINOLOGY AND MEASUREMENTS OF FEATURES |
|
UNI EN 1263-2 : 2003
|
TEMPORARY WORKS EQUIPMENT - SAFETY NETS - PART 2: SAFETY REQUIREMENTS FOR THE POSITIONING LIMITS |
|
UNI EN 13167 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
|
UNI EN 1396 : 2007
|
ALUMINIUM AND ALUMINIUM ALLOYS - COIL COATED SHEET AND STRIP FOR GENERAL APPLICATIONS - SPECIFICATIONS |
|
UNI EN 14063-1 : 2005
|
THERMAL INSULATION MATERIALS AND PRODUCTS - IN-SITU FORMED EXPANDED CLAY LIGHTWEIGHT AGGREGATE PRODUCTS (LWA) - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
UNI EN ISO 6158 : 2011
|
METALLIC AND OTHER INORGANIC COATINGS - ELECTRODEPOSITED COATINGS OF CHROMIUM FOR ENGINEERING PURPOSES |
|
UNI EN 14934 : 2008
|
THERMAL INSULATION AND LIGHT WEIGHT FILL PRODUCTS FOR CIVIL ENGINEERING APPLICATIONS - FACTORY MADE PRODUCTS OF EXTRUDED POLYSTYRENE FOAM (XPS) - SPECIFICATION |
|
UNI 8178 : 2012
|
BUILDING - ROOFINGS - ANALYSIS OF FUNCTIONAL COMPONENTS |
|
UNI EN 1991-1-4 : 2010
|
EUROCODE 1 - ACTIONS ON STRUCTURES - PART 1-4: GENERAL ACTIONS - WIND ACTIONS |
|
UNI EN 13859-1 : 2014
|
FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 1: UNDERLAYS FOR DISCONTINUOUS ROOFING |
|
UNI EN 1090-3 : 2008
|
EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 3: TECHNICAL REQUIREMENTS FOR ALUMINIUM STRUCTURES |
|
UNI EN 14316-1 : 2005
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXPANDED PERLITE (EP) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
UNI EN 1172 : 2012
|
COPPER AND COPPER ALLOYS - SHEET AND STRIP FOR BUILDING PURPOSES |
|
UNI EN 14782 : 2006
|
SELF-SUPPORTING METAL SHEET FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
|
UNI EN 358 : 2001
|
PERSONAL PROTECTIVE EQUIPMENT FOR WORK POSITIONING AND PREVENTION OF FALLS FROM A HEIGHT - BELTS FOR WORK POSITIONING AND RESTRAINT AND WORK POSITIONING LANYARDS |
|
UNI 8089 : 2012
|
BUILDING - ROOFING AND RELATED FUNCTIONAL COMPONENTS - TERMINOLOGY RELATED TO FUNCTIONAL PERFORMANCE |
|
UNI EN 13501-1 : 2009
|
FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
|
UNI EN 13111 : 2010
|
FLEXIBLE SHEETS FOR WATERPROOFING - UNDERLAYS FOR DISCONTINUOUS ROOFING AND WALLS - DETERMINATION OF RESISTANCE TO WATER PENETRATION |
|
UNI EN ISO 12944-2 : 2001
|
PAINTS AND VARNISHES - CORROSION PROTECTION OF STEEL STRUCTURES BY PROTECTIVE PAINT SYSTEMS - CLASSIFICATION OF ENVIRONMENTS |
|
UNI EN 13823 : 2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
|
UNI EN 13168 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD WOOL (WW) PRODUCTS - SPECIFICATION |
|
UNI EN 506 : 2008
|
ROOFING PRODUCTS OF METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF COPPER OR ZINC SHEET |
|
UNI 9029 : 2011
|
BUILDING - METALLIC PRODUCTS FOR DISCONTINUOUS ROOFING - DESCRIPTIVE CLASSIFICATION |
|
UNI EN 10088-1 : 2014
|
STAINLESS STEELS - PART 1: LIST OF STAINLESS STEELS |
|
UNI EN 1995-1-1 : 2014
|
EUROCODE 5 - DESIGN OF TIMBER STRUCTURES - PART 1-1: GENERAL - COMMON RULES AND RULES FOR BUILDINGS |
|
UNI EN 14304 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
|
UNI EN 1993-1-3 : 2007
|
EUROCODE 3 - DESIGN OF STEEL STRUCTURES - PART 1-3: GENERAL RULES - SUPPLEMENTARY RULES FOR COLD-FORMED MEMBERS AND SHEETING |
|
UNI EN 13170 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PRODUCTS OF EXPANDED CORK (ICB) - SPECIFICATION |
|
UNI EN 508-2 : 2008
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 2: ALUMINIUM |
|
UNI EN 12831 : 2006
|
HEATING SYSTEMS IN BUILDINGS - METHOD FOR CALCULATION OF THE DESIGN HEAT LOAD |
|
UNI EN 612 : 2005
|
EAVES GUTTERS WITH BEAD STIFFENED FRONTS AND RAINWATER PIPES WITH SEAMED JOINTS MADE OF METAL SHEET |
|
UNI EN ISO 2063 : 2005
|
THERMAL SPRAYING - METALLIC AND OTHER INORGANIC COATINGS - ZINC, ALUMINIUM AND THEIR ALLOYS |
|
UNI EN 13165 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE RIGID POLYURETHANE FOAM (PU) PRODUCTS - SPECIFICATION |
|
UNI EN 14313 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
|
UNI EN 14064-1 : 2010
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU FORMED LOOSE-FILL MINERAL WOOL (MW) PRODUCTS - PART 1: SPECIFICATION FOR THE LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
UNI 8818 : 1986
|
SHEETS FOR ROOFING AND SEALING - CLASSIFICATION BASED ON PRODUCTS DESCRIPTION |
|
UNI 8090 : 1980
|
BUILDING - ADDITIONAL COMPONENTS OF ROOFING - TERMINOLOGY |
|
UNI 11035-3 : 2010
|
STRUCTURAL TIMBER - VISUAL STRENGTH GRADING - PART 3: TIMBER USO FIUME AND USO TRIESTE |
|
UNI EN 13859-2 : 2014
|
FLEXIBLE SHEETS FOR WATERPROOFING - DEFINITIONS AND CHARACTERISTICS OF UNDERLAYS - PART 2: UNDERLAYS FOR WALLS |
|
UNI EN 14509 : 2013
|
SELF-SUPPORTING DOUBLE SKIN METAL FACED INSULATING PANELS - FACTORY MADE PRODUCTS - SPECIFICATIONS |
|
UNI EN 10025-4 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 4: TECHNICAL DELIVERY CONDITIONS FOR THERMOMECHANICAL ROLLED WELDABLE FINE GRAIN STRUCTURAL STEELS |
|
UNI EN 1462 : 2005
|
BRACKETS FOR EAVES GUTTERS - REQUIREMENTS AND TESTING |
|
UNI EN 10025-1 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 1: GENERAL TECHNICAL DELIVERY CONDITIONS |
|
CEI EN 62305-2 : 2013
|
PROTECTION AGAINST LIGHTNING - PART 2: RISK MANAGEMENT |
|
UNI EN 13374 : 2013
|
TEMPORARY EDGE PROTECTION SYSTEMS - PRODUCT SPECIFICATION - TEST METHODS |
|
UNI EN 12056-3 : 2001
|
GRAVITY DRAINAGE SYSTEMS INSIDE BUILDINGS - ROOF DRAINAGE, LAYOUT AND CALCULATION |
|
UNI EN 988 : 1998
|
ZINC AND ZINC ALLOYS - SPECIFICATIONS FOR ROLLED FLAT PRODUCTS FOR BUILDING |
|
UNI EN 10216-5 : 2014
|
SEAMLESS STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 5: STAINLESS STEEL TUBES |
|
UNI EN ISO 1264 : 1999
|
PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - DETERMINATION OF PH OF AQUEOUS EXTRACT |
|
CEI EN 62305-3 : 2013
|
PROTECTION AGAINST LIGHTNING - PART 3: PHYSICAL DAMAGE TO STRUCTURES AND LIFE HAZARD |
|
UNI EN 14317-1 : 2005
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - IN-SITU THERMAL INSULATION FORMED FROM EXFOLIATED VERMICULITE (EV) PRODUCTS - PART 1: SPECIFICATION FOR BONDED AND LOOSE-FILL PRODUCTS BEFORE INSTALLATION |
|
UNI EN ISO 2081 : 2009
|
METALLIC AND OTHER INORGANIC COATINGS - ELECTROPLATED COATINGS OF ZINC WITH SUPPLEMENTARY TREATMENTS ON IRON OR STEEL |
|
UNI EN 13166 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
|
UNI EN 10169 : 2012
|
CONTINUOUSLY ORGANIC COATED (COIL COATED) STEEL FLAT PRODUCTS - TECHNICAL DELIVERY CONDITIONS |
|
UNI EN 795 : 2012
|
PERSONAL FALL PROTECTION EQUIPMENT - ANCHOR DEVICES |
|
UNI EN 485-4 : 1996
|
ALUMINIUM AND ALUMINIUM ALLOYS - SHEET, STRIP AND PLATE - TOLERANCES ON SHAPE AND DIMENSIONS FOR COLD-ROLLED PRODUCTS |
|
UNI 8091 : 1980
|
BUILDING - ROOFING - GEOMETRICAL TERMINOLOGY |
|
UNI EN ISO 3506-2 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
|
UNI EN ISO 3506-1 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
|
UNI 10724 : 2004
|
ROOF COVERINGS - RAIN WATER DRAINAGE SYSTEMS - DESIGN AND EXECUTION CRITERIA BY DISCONTINUOUS ELEMENTS |
|
UNI EN 10088-3 : 2014
|
STAINLESS STEELS - PART 3: TECHNICAL DELIVERY CONDITIONS FOR SEMIFINISHED PRODUCTS, BARS, RODS, WIRE, SECTIONS AND BRIGHT PRODUCTS OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
|
UNI EN 14783 : 2013
|
FULLY SUPPORTED METAL SHEET AND STRIP FOR ROOFING, EXTERNAL CLADDING AND INTERNAL LINING - PRODUCT SPECIFICATION AND REQUIREMENTS |
|
UNI EN 13171 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE WOOD FIBRE (WF) PRODUCTS - SPECIFICATION |
|
UNI EN 508-3 : 2008
|
ROOFING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING PRODUCTS OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 3: STAINLESS STEEL |
|
UNI EN ISO 3506-3 : 2010
|
MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
|
UNI EN 13164 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
|
UNI EN 573-3 : 2013
|
ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL COMPOSITION AND FORM OF WROUGHT PRODUCTS - PART 3: CHEMICAL COMPOSITION AND FORM OF PRODUCTS |
|
UNI EN 508-1 : 2014
|
ROOFING AND CLADDING PRODUCTS FROM METAL SHEET - SPECIFICATION FOR SELF-SUPPORTING OF STEEL, ALUMINIUM OR STAINLESS STEEL SHEET - PART 1: STEEL |
|
UNI EN 607 : 2005
|
EAVES GUTTERS AND FITTINGS MADE OF PVC-U - DEFINITIONS, REQUIREMENTS AND TESTING |
|
UNI EN 13163 : 2013
|
THERMAL INSULATION PRODUCTS FOR BUILDINGS - FACTORY MADE EXPANDED POLYSTYRENE (EPS) PRODUCTS - SPECIFICATION |
|
UNI 8811 : 1987
|
MINERALS FIBRES - RESIN BOUNDED BLANKETS FOR THERMAL INSULATION - ACCEPTANCE CRITERIA |
|
UNI EN 10025-2 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS |
|
UNI EN 10025-5 : 2005
|
HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 5: TECHNICAL DELIVERY CONDITIONS FOR STRUCTURAL STEELS WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE |
|
UNI 8627 : 2012
|
BUILDING - ROOFING - TERMINOLOGY AND CLASSIFICATION OF FUNCTIONAL SCHEMES, CONFORM SOLUTIONS AND TECHNOLOGICAL SOLUTIONS |
|
UNI EN 10143 : 2006
|
CONTINUOUSLY HOT-DIP COATED STEEL SHEET AND STRIP - TOLERANCES ON DIMENSIONS AND SHAPE |