|
ISO 9445:2002
|
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths Tolerances on dimensions and form |
|
ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method |
|
EN ISO 14284:2002
|
Steel and iron - Sampling and preparation of samples for the determination of chemical composition (ISO 14284:1996) |
|
EN 10002-1 : 2001
|
METALLIC MATERIALS - TENSILE TESTING - PART 1: METHOD OF TEST AT AMBIENT TEMPERATURE |
|
EN 10052:1993
|
Vocabulary of heat treatment terms for ferrous products |
|
EN ISO 6508-1:2016
|
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
|
EN ISO 6506-1:2014
|
Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) |
|
EN 10048:1996
|
Hot rolled narrow steel strip - Tolerances on dimensions and shape |
|
EN 10051:2010
|
Continuously hot-rolled strip and plate/sheet cut from wide strip of non-alloy and alloy steels - Tolerances on dimensions and shape |
|
ISO 6506-1:2014
|
Metallic materials Brinell hardness test Part 1: Test method |
|
EN 10079:2007
|
Definition of steel products |
|
EN 10027-2:2015
|
DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM |
|
CEN/TR 10261:2013
|
Iron and steel - European standards for the determination of chemical composition |
|
EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape |
|
EN 10002-5:1991
|
Metallic materials - Tensile testing - Part 5: Method of testing at elevated temperature |
|
EN ISO 377:2017
|
Steel and steel products - Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) |
|
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method |
|
EN 10151:2002
|
Stainless steel strip for springs - Technical delivery conditions |
|
EN 10168:2004
|
Steel products - Inspection documents - List of information and description |
|
EN 10088-2:2014
|
STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES |
|
EN 10028-7:2016
|
Flat products made of steels for pressure purposes - Part 7: Stainless steels |
|
EN 10045-1 : 1990
|
METALLIC MATERIALS - CHARPY IMPACT TEST - PART 1: TEST METHOD |
|
EN 10095:1999
|
Heat resisting steels and nickel alloys |
|
EN 10163-2:2004
|
Delivery requirements for surface condition of hot-rolled steel plates, wide flats and sections - Part 2: Plate and wide flats |
|
EN ISO 9001:2015
|
Quality management systems - Requirements (ISO 9001:2015) |
|
EN 10021:2006
|
General technical delivery conditions for steel products |
|
ISO 3651-2:1998
|
Determination of resistance to intergranular corrosion of stainless steels — Part 2: Ferritic,austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in media containing sulfuric acid |
|
EN 10204:2004
|
Metallic products - Types of inspection documents |
|
EN 10307:2001
|
Non-destructive testing - Ultrasonic testing of austenitic and austenitic-ferritic stainless steels flat products of thickness equal to or greater than 6 mm (reflection method) |
|
EN ISO 3651-2 : 1998
|
DETERMINATION OF RESISTANCE TO INTERGRANULAR CORROSION OF STAINLESS STEELS - FERRITIC, AUSTENITIC AND FERRITIC-AUSTENITIC (DUPLEX) STAINLESS STEELS - CORROSION TEST IN MEDIA CONTAINING SULFURIC ACID |
|
ISO 9001:2015
|
Quality management systems — Requirements |
|
EN 10027-1:2016
|
Designation systems for steels - Part 1: Steel names |
|
EN ISO 9445:2006
|
Continuously cold-rolled stainless steel narrow strip, wide strip, plate/sheet and cut lengths - Tolerances on dimensions and form (ISO 9445:2002) |
|
EN 10302:2008
|
Creep resisting steels, nickel and cobalt alloys |
|
ISO 377:2017
|
Steel and steel products — Location and preparation of samples and test pieces for mechanical testing |
|
ISO 14284:1996
|
Steel and iron — Sampling and preparation of samples for the determination of chemical composition |
|
EN 10088-1:2014
|
Stainless steels - Part 1: List of stainless steels |