EN 1389:2003 (edition 2)
|
Advanced technical ceramics - Ceramic composites - Physical properties - Determination of density and apparent porosity |
EN 12923-1:2006
|
Advanced technical ceramics - Monolithic ceramics - Part 1: General practice for undertaking corrosion tests |
EN 1071-6:2007
|
Advanced technical ceramics - Methods of test for ceramic coatings - Part 6: Determination of the abrasion resistance of coatings by a micro-abrasion wear test |
CEN/TS 1159-4:2004
|
Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 4: Determination of thermal conductivity |
EN 1007-1:2002
|
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 1: Determination of size content |
EN 1007-2:2002
|
Advanced technical ceramics - Ceramics composites - Methods of test for reinforcement - Part 2: Determination of linear density |
EN 843-2:2006
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio |
EN 12290:2005
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of compression properties |
EN 1071-10:2009
|
Advanced technical ceramics - Methods of test for ceramic coatings - Part 10: Determination of coating thickness by cross sectioning |
CEN/TS 15658:2007
|
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature under non-reactive environment - Determination of creep behaviour by the hot end method |
EN 1007-3:2002
|
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcement - Part 3: Determination of filament diameter and cross-section area |
EN 843-1:2006
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength |
EN 725-5:2007/AC:2007
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC POWDERS - PART 5: DETERMINATION OF PARTICLE SIZE DISTRIBUTION |
EN 821-3 : 2005
|
ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
EN 15335:2007
|
Advanced technical ceramics - Ceramic composites - Determination of elastic properties by resonant beam method up to 2 000 °C |
EN 820-1:2002
|
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures |
EN 12789:2002
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under air at atmospheric pressure - Determination of flexural strength |
EN 725-2:2007
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 2: Determination of impurities in barium titanate |
EN 12788:2005
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of flexural strength |
CEN/TS 15365:2006
|
Advanced technical ceramics - Mechanical properties of ceramic fibres at high temperature in a non-reactive environment - Determination of creep behaviour by the cold end method |
EN 623-4:2004
|
Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 4: Determination of surface roughness |
EN 13234:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Evaluation of the resistance to crack propagation by notch sensitivity testing |
EN 821-1 : 1995
|
ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - THERMO-PHYSICAL PROPERTIES - DETERMINATION OF THERMAL EXPANSION |
EN ISO 18756 : 2005
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY THE SURFACE CRACK IN FLEXURE (SCF) METHOD |
ISO 18753:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Determination of absolute density of ceramic powders by pycnometer |
EN 1007-6:2007
|
Advanced technical ceramic - Ceramic composites - Methods of test for reinforcements - Part 6: Determination of tensile properties of filaments at high temperature |
EN 1159-1:2003
|
Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 1: Determination of thermal expansion |
EN 843-5:2006
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis |
EN 658-1:1998
|
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 1: Determination of tensile properties |
EN 1071-9:2009
|
Advanced technical ceramics - Methods of test for ceramic coatings - Part 9: Determination of fracture strain |
EN 1006:2009
|
Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
CEN/TS 1071-11 : 2005
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 11: DETERMINATION OF INTERNAL STRESS BY THE STONEY FORMULA |
EN 820-4:2009
|
Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures |
EN 15156:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of fatigue properties at constant amplitude |
EN 843-3:2005
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests |
EN 843-6:2009
|
Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation |
EN 623-1:2006
|
Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 1: Determination of the presence of defects by dye penetration |
EN 820-2:2003
|
Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation |
EN 12289:2005
|
Advanced technical ceramics - Mechanical properties of ceramic composites at ambient temperature - Determination of in-plane shear properties |
CEN/TS 1071-8 : 2004
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 8: ROCKWELL INDENTATION TEST FOR EVALUATION OF ADHESION |
EN 1159-3:2003/AC:2008
|
ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES, THERMOPHYSICAL PROPERTIES - PART 3: DETERMINATION OF SPECIFIC HEAT CAPACITY |
EN 725-11:2006
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 11: Determination of densification on natural sintering |
EN 1892:2005
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties |
EN 725-1:2007
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 1: Determination of impurities in alumina |
EN 725-8:2006
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 8: Determination of tapped bulk density |
EN ISO 15732 : 2005
|
FINE CERAMICS (ADVANCED CERAMICS, ADVANCED TECHNICAL CERAMICS) - TEST METHOD FOR FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE BY SINGLE EDGE PRECRACKED BEAM (SEPB) METHOD (ISO 15732:2003) |
EN 725-9:2006
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 9: Determination of un-tapped bulk density |
EN 1071-1 : 2003
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER |
EN 820-5:2009
|
Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures |
EN 623-2:1993
|
Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 2: Determination of density and porosity |
EN 658-2 : 2002
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF CERAMIC COMPOSITES AT ROOM TEMPERATURE - PART 2: DETERMINATION OF COMPRESSION PROPERTIES |
EN 821-2:1997
|
Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method |
EN 1071-4:2006
|
Advanced technical ceramics - Methods of test for ceramic coatings - Part 4: Determination of chemical composition by electron probe microanalysis (EPMA) |
CEN/TS 1007-7:2006
|
Advanced technical ceramics - Ceramic composites. Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature |
EN 1893:2005
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties |
EN 658-5:2002
|
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 5: Determination of interlaminar shear strength by short span bend test (three points) |
CEN/TS 14425-1 : 2003
|
ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 1: GUIDE TO TEST METHOD SELECTION |
ISO 18756:2003
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of fracture toughness of monolithic ceramics at room temperature by the surface crack in flexure (SCF) method |
EN 14232:2009
|
Advanced technical ceramics - Terms, definitions and abbreviations |
CEN/TS 14425-5 : 2004
|
ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITIC CERAMICS - PART 5: SINGLE-EDGE VEE-NOTCH BEAM (SEVNB) METHOD |
EN 623-5:2009
|
Advanced technical ceramics - Monolithic ceramics - General and textural properties - Part 5: Determination of phase volume fraction by evaluation of micrographs |
EN 843-4 : 2005
|
ADVANCED TECHNICAL CERAMICS - MECHANICAL PROPERTIES OF MONOLITHIC CERAMICS AT ROOM TEMPERATURE - PART 4: VICKERS, KNOOP AND ROCKWELL SUPERFICIAL HARDNESS |
EN 623-3 : 2001
|
ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GENERAL AND TEXTURAL PROPERTIES - DETERMINATION OF GRAIN SIZE AND SIZE DISTRIBUTION (CHARACTERIZED BY THE LINEAR INTERCEPT METHOD) |
EN ISO 18757:2005
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of specific surface area of ceramic powders by gas adsorption using the BET method (ISO 18757:2003) |
ENV 14226:2002
|
Advanced technical ceramics - Test methods for ceramic powders - Determination of calcium, magnesium, iron and aluminium in silicon nitride by using flame atomic absorption spectroscopy (FAAS) or inductively coupled plasma atomic emission spectroscopy (ICP-AES) |
EN 1159-2:2003
|
Advanced technical ceramics - Ceramic composites - Thermophysical properties - Part 2: Determination of thermal diffusivity |
EN 15157:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of fatigue properties at constant amplitude |
ISO 18757:2003
|
Fine ceramics (advanced ceramics, advanced technical ceramics) Determination of specific surface area of ceramic powders by gas adsorption using the BET method |
ENV 14312 : DRAFT 2002
|
ADVANCED TECHNICAL CERAMICS - CERAMIC POWDERS - DETERMINATION OF FLOWABILITY BEHAVIOUR OF CERAMIC GRANULES |
EN 15158:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of fatigue properties at constant amplitude |
IEC 60672-2:1999
|
Ceramic and glass insulating materials - Part 2: Methods of test |
EN 14186:2007
|
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Determination of elastic properties by an ultrasonic technique |
EN 725-10:2007
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 10: Determination of compaction properties |
EN 820-3 : 2004
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TESTING MONOLITHIC CERAMICS - THERMOMECHANICAL PROPERTIES - PART 3: DETERMINATION OF RESISTANCE TO THERMAL SHOCK BY WATER QUENCHING |
EN 725-12:2001
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia |
EN 1007-4:2004
|
ADVANCED TECHNICAL CERAMICS - CERAMIC COMPOSITES - METHODS OF TEST FOR REINFORCEMENT - PART 4: DETERMINATION OF TENSILE PROPERTIES OF FILAMENTS AT AMBIENT TEMPERATURE |
EN 1007-5:2010
|
Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 5: Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature |
EN 1071-2 : 2002
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 2: DETERMINATION OF COATING THICKNESS BY THE CRATER GRINDING METHOD |
EN 1071-3 : 2005
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 3: DETERMINATION OF ADHESION AND OTHER MECHANICAL FAILURE MODES BY A SCRATCH TEST |
EN ISO 18753:2017
|
Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of absolute density of ceramic powders by pycnometer (ISO 18753:2017) |
EN 1894:2005
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens |
EN 725-3:2007
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 3: Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas |
EN 12291:2003
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of compression properties |
ENV 12923-2 : DRAFT 2001
|
ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - PART 2: OXIDATION TEST |
EN 658-4:2003
|
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 4: Determination of interlaminar shear strength by compression loading of notched test specimens |
CEN/TR 13233 : 2007 COR 2007
|
ADVANCED TECHNICAL CERAMICS - NOTATIONS AND SYMBOLS |
ISO 15732:2003
|
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for fracture toughness of monolithic ceramics at room temperature by single edge precracked beam (SEPB) method |
EN 725-4:2006
|
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis |
ENV 14273:2002
|
Advanced technical ceramics - Ceramic powders - Determination of crystalline phases in zirconia |
EN 658-3:2002
|
Advanced technical ceramics - Mechanical properties of ceramic composites at room temperature - Part 3: Determination of flexural strength |
EN 13235:2006
|
Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of creep behaviour |
CEN/TS 14425-3 : 2003
|
ADVANCED TECHNICAL CERAMICS - TEST METHODS FOR DETERMINATION OF FRACTURE TOUGHNESS OF MONOLITHIC CERAMICS - PART 3: CHEVRON NOTCHED BEAM (CNB) METHOD |