Skip to content
Please enter a keyword to search

  • UNI EN 1520 : 2011

    Current The latest, up-to-date edition.

    Prefabricated reinforced components of lightweight aggregate concrete with open structure with structural or non- structural reinforcement

    Available format(s): 

    Language(s): 

    Published date:  07-04-2011

    Publisher:  Ente Nazionale Italiano di Unificazione (UNI)

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    1 Scope
    2 Normative references
    3 Terms, definitions, symbols and abbreviations
    4 Properties and requirements of materials
    5 Properties and requirements of components
    6 Evaluation of conformity
    7 Basis for design
    8 Marking, labelling and designation
    Annex A (normative) - Design of components by calculation
    Annex B (informative) - Design of components by testing
    Annex C (informative) - Recommended values for partial safety
            factor
    Annex ZA (informative) - Provisions for the CE marking of
             prefabricated components of lightweight aggregate
             concrete with open structure with structural or
             non-structural reinforcement under the EU Construction
             Product Directive
    Bibliography

    Abstract - (Show below) - (Hide below)

    Defines prefabricated components of lightweight aggregate concrete (LAC) with open structure and with structural or non-structural reinforcement intended to be used in building construction.

    General Product Information - (Show below) - (Hide below)

    Committee CT 21
    Document Type Standard
    Publisher Ente Nazionale Italiano di Unificazione (UNI)
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 12667:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
    EN 1365-1:2012/AC:2013 FIRE RESISTANCE TESTS FOR LOADBEARING ELEMENTS - PART 1: WALLS
    EN ISO 10456:2007/AC:2009 BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES
    ISO 354:2003 Acoustics — Measurement of sound absorption in a reverberation room
    CEN/TR 15728:2016 Design and use of inserts for lifting and handling of precast concrete elements
    EN 1521:1996 Determination of flexural strength of lightweight aggregate concrete with open structure
    ISO 717-2:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 2: Impact sound insulation
    EN ISO 6892-1:2016 Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2016)
    EN 12939:2000 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
    EN 1365-3:1999 Fire resistance tests for loadbearing elements - Part 3: Beams
    ISO 1716:2010 Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
    EN 1364-1:1999 Fire resistance tests for non-loadbearing elements - Part 1: Walls
    EN 1739:2007 Determination of shear strength for in-plane forces of joints between prefabricated components of autoclaved aerated concrete or lightweight aggregate concrete with open structure
    ISO 140-6:1998 Acoustics Measurement of sound insulation in buildings and of building elements Part 6: Laboratory measurements of impact sound insulation of floors
    EN 1740:1998 Performance test for prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure under predominantly longitudinal load (vertical components)
    ISO 6892-1:2016 Metallic materials Tensile testing Part 1: Method of test at room temperature
    EN ISO 1182:2010 Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
    EN ISO 717-2:2013 Acoustics - Rating of sound insulation in buildings and of building elements - Part 2: Impact sound insulation (ISO 717-2:2013)
    ISO 140-3:1995 Acoustics — Measurement of sound insulation in buildings and of building elements — Part 3: Laboratory measurements of airborne sound insulation of building elements
    EN 1745:2012 Masonry and masonry products - Methods for determining thermal properties
    EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
    EN 10080:2005 Steel for the reinforcement of concrete - Weldable reinforcing steel - General
    EN 14388:2015 Road traffic noise reducing devices - Specifications
    EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
    EN 1354:2005 Determination of compressive strength of lightweight aggregate concrete with open structure
    ISO 1182:2010 Reaction to fire tests for products Non-combustibility test
    EN ISO 6946:2017 Building components and building elements - Thermal resistance and thermal transmittance - Calculation methods (ISO 6946:2017, Corrected version 2021-12)
    ISO 12572:2016 Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method
    EN 12354-1:2000 Building Acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms
    ISO 15148:2002 Hygrothermal performance of building materials and products Determination of water absorption coefficient by partial immersion
    EN ISO 12572:2016 Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016)
    EN ISO 140-6 : 1998 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 6: LABORATORY MEASUREMENTS OF IMPACT SOUND INSULATION OF FLOORS
    EN ISO 354:2003 Acoustics - Measurement of sound absorption in a reverberation room (ISO 354:2003)
    EN ISO 140-3:1995/A1:2004 ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - PART 3: LABORATORY MEASUREMENTS OF AIRBORNE SOUND INSULATION OF BUILDING ELEMENTS
    EN 1742:1998 Determination of shear strength between different layers of multilayer components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
    EN 991:1995 Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
    EN 1355:1996 Determination of creep strains under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
    EN 12664:2001 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance
    EN 1352:1996 Determination of static modulus of elasticity under compression of autoclaved aerated concrete or lightweight aggregate concrete with open structure
    EN 1356:1996 Performance test for prefabricated reinforced components of autoclaved aerated concrete or lightweight aggregate concrete with open structure under transverse load
    EN 990:2002 Test methods for verification of corrosion protection of reinforcement in autoclaved aerated concrete and lightweight aggregate concrete with open structure
    ISO 10456:2007 Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values
    ISO 80000-1:2009 Quantities and units — Part 1: General
    EN 992:1995 Determination of the dry density of lightweight aggregate concrete with open structure
    EN 10025-2:2004/AC:2005 HOT ROLLED PRODUCTS OF STRUCTURAL STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR NON-ALLOY STRUCTURAL STEELS
    EN 1793-1:2017 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 1: Intrinsic characteristics of sound absorption under diffuse sound field conditions
    EN 206-1:2000/A2:2005 CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY
    ISO 717-1:2013 Acoustics Rating of sound insulation in buildings and of building elements Part 1: Airborne sound insulation
    EN 1365-4:1999 Fire resistance tests for loadbearing elements - Part 4: Columns
    EN 1741:1998 Determination of shear strength for out-of-plane forces of joints between prefabricated components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure
    EN 1992-1-1:2004/A1:2014 EUROCODE 2: DESIGN OF CONCRETE STRUCTURES - PART 1-1: GENERAL RULES AND RULES FOR BUILDINGS
    ISO 6946:2017 Building components and building elements — Thermal resistance and thermal transmittance — Calculation methods
    EN 13055-1:2002/AC:2004 LIGHTWEIGHT AGGREGATES - PART 1: LIGHTWEIGHT AGGREGATES FOR CONCRETE, MORTAR AND GROUT
    EN ISO 15148:2002/A1:2016 HYGROTHERMAL PERFORMANCE OF BUILDING MATERIALS AND PRODUCTS - DETERMINATION OF WATER ABSORPTION COEFFICIENT BY PARTIAL IMMERSION (ISO 15148:2002+A1:2016)
    EN 1990:2002/A1:2005/AC:2010 EUROCODE - BASIS OF STRUCTURAL DESIGN
    EN ISO 1716:2010 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
    EN 1365-2:2014 Fire resistance tests for loadbearing elements - Part 2: Floors and roofs
    EN 12354-2:2000 Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 2: Impact sound insulation between rooms
    EN 1793-2:2012 Road traffic noise reducing devices - Test method for determining the acoustic performance - Part 2: Intrinsic characteristics of airborne sound insulation under diffuse sound field conditions
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective