Skip to content
Please enter a keyword to search

  • UNI EN 303-5 : 2012

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    HEATING BOILERS - PART 5: HEATING BOILERS FOR SOLID FUELS, MANUALLY AND AUTOMATICALLY STOKED, NOMINAL HEAT OUTPUT OF UP TO 500 KW - TERMINOLOGY, REQUIREMENTS, TESTING AND MARKING

    Available format(s): 

    Superseded date:  18-08-2022

    Language(s): 

    Published date:  01-01-2012

    Publisher:  Ente Nazionale Italiano di Unificazione (UNI)

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 Requirements
    5 Test
    6 Test report and other documents
    7 Marking
    8 Technical documentation, supplied with boiler
    Annex A (informative) - Manual measurement of particles
            in the gas flow, gravimetric determination of particle
            load with filter systems
    Annex B (normative) - Design criteria for solutions to
            prevent back burning
    Annex C (informative) - A-deviations
    Annex ZA (informative) - Relationship between this European
             Standard and the Essential Requirements of EU
             Directive 2006/42/EC Machinery Directive
    Bibliography

    Abstract - (Show below) - (Hide below)

    Pertains to heating boilers including safety devices up to a nominal heat output of 500 kW which are designed for the burning of solid fuels only and are operated according to the instructions of the boiler manufacturer.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes UNI 10201. (10/2004)
    Document Type Standard
    Publisher Ente Nazionale Italiano di Unificazione (UNI)
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNI 10683 : 2012 HEATING APPLIANCES FIRED BY WOOD OR OTHER SOLID BIOFUELS - INSTALLATION REQUIREMENTS
    UNI/TS 11300-4 : 2012 ENERGY PERFORMANCE OF BUILDINGS - PART 4: RENEWABLE ENERGY AND OTHER GENERATION SYSTEMS FOR SPACE HEATING AND DOMESTIC HOT WATER PRODUCTION
    UNI 10412-2 : 2009 HOT WATER HEATING SYSTEMS - SAFETY REQUIREMENTS - PART 2: REQUIREMENTS FOR SYSTEMS WITH RESIDENTIAL SOLID FUELS BURNING APPLIANCES WITH BOILER, NOT EXCEEDING A TOTAL NOMINAL HEAT OUTPUT OF 35 KW
    UNI/TS 11459 : 2012 SOLID BIOFUELS - BY-PRODUCTS FROM GRAPES PROCESSING FOR ENERGY USE - CLASSIFICATION AND SPECIFICATIONS

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 15270:2007 Pellet burners for small heating boilers - Definitions, requirements, testing, marking
    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    ISO 2553:2013 Welding and allied processes Symbolic representation on drawings Welded joints
    IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
    EN 10120:2017 Steel sheet and strip for welded gas cylinders
    EN ISO 6506-1:2014 Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014)
    ISO 6506-1:2014 Metallic materials Brinell hardness test Part 1: Test method
    IEC 60730-2-9:2015 RLV Automatic electrical controls - Part 2-9: Particular requirements for temperature sensing controls
    EN ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002)
    EN ISO 228-2:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 2: Verification by means of limit gauges (ISO 228-2:1987)
    CEN/TS 15883:2009 Residential solid fuel burning appliances - Emission test methods
    ISO 7005-2:1988 Metallic flanges — Part 2: Cast iron flanges
    ISO 9606-2:2004 Qualification test of welders — Fusion welding — Part 2: Aluminium and aluminium alloys
    EN 10027-2:2015 DESIGNATION SYSTEMS FOR STEELS - PART 2: NUMERICAL SYSTEM
    EN 61000-6-3:2007/A1:2011/AC:2012 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-3: GENERIC STANDARDS - EMISSION STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS (IEC 61000-6-3:2006/A1:2010)
    ISO 13919-1:1996 Welding Electron and laser-beam welded joints Guidance on quality levels for imperfections Part 1: Steel
    ISO 15614-11:2002 Specification and qualification of welding procedures for metallic materials Welding procedure test Part 11: Electron and laser beam welding
    EN 10028-3:2017 Flat products made of steels for pressure purposes - Part 3: Weldable fine grain steels, normalized
    EN 10029:2010 Hot-rolled steel plates 3 mm thick or above - Tolerances on dimensions and shape
    IEC 61000-6-2:2016 Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity standard for industrial environments
    EN 14961-1:2010 Solid biofuels - Fuel specifications and classes - Part 1: General requirements
    EN 304:2017 Heating boilers - Test code for heating boilers for atomizing oil burners
    EN 60730-2-9:2010 Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
    ISO 7005-3:1988 Metallic flanges Part 3: Copper alloy and composite flanges
    EN 14597:2012 Temperature control devices and temperature limiters for heat generating systems
    EN ISO 4063:2010 Welding and allied processes - Nomenclature of processes and reference numbers (ISO 4063:2009, Corrected version 2010-03-01)
    EN 15456:2008 Heating boilers - Electrical power consumption for heat generators - System boundaries - Measurements
    EN 303-1:2017 Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking
    ISO 7-2:2000 Pipe threads where pressure-tight joints are made on the threads Part 2: Verification by means of limit gauges
    EN 14778:2011 Solid biofuels - Sampling
    EN 13501-2:2016 Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services
    EN 10025-1:2004 Hot rolled products of structural steels - Part 1: General technical delivery conditions
    EN 10088-2:2014 STAINLESS STEELS - PART 2: TECHNICAL DELIVERY CONDITIONS FOR SHEET/PLATE AND STRIP OF CORROSION RESISTING STEELS FOR GENERAL PURPOSES
    ISO 12100:2010 Safety of machinery — General principles for design — Risk assessment and risk reduction
    EN 13526:2001 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
    EN 14789:2017 Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism
    EN 10028-2:2017 Flat products made of steels for pressure purposes - Part 2: Non-alloy and alloy steels with specified elevated temperature properties
    EN ISO 228-1:2003 Pipe threads where pressure-tight joints are not made on the threads - Part 1: Dimensions, tolerances and designation (ISO 228-1:2000)
    EN ISO 13919-1:1996 Welding - Electrons and laser beam welded joints - Guidance on quality levels for imperfections - Part 1: Steel (ISO 13919-1:1996)
    IEC 61000-6-3:2006+AMD1:2010 CSV Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
    EN 13284-1:2017 Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method
    EN 14961-2:2011 Solid biofuels - Fuel specifications and classes - Part 2: Wood pellets for non-industrial use
    EN 13384-1:2015 Chimneys - Thermal and fluid dynamic calculation methods - Part 1: Chimneys serving one heating appliance
    EN 15058:2017 Stationary source emissions - Determination of the mass concentration of carbon monoxide - Standard reference method: non-dispersive infrared spectrometry
    EN 12619:2013 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method
    EN 61000-6-2:2005/corrigendum:2005 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY FOR INDUSTRIAL ENVIRONMENTS (IEC 61000-6-2:2005)
    EN 22553:1994 Welded, brazed and soldered joints - Symbolic representation on drawings (ISO 2553:1992)
    EN 14961-4:2011 Solid biofuels - Fuel specifications and classes - Part 4: Wood chips for non-industrial use
    EN ISO 9606-2:2004 Qualification test of welders - Fusion welding - Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004)
    ISO 857-1:1998 Welding and allied processes Vocabulary Part 1: Metal welding processes
    EN 10222-2:2017 Steel forgings for pressure purposes - Part 2: Ferritic and martensitic steels with specified elevated temperatures properties
    EN 60335-2-102:2016 Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections
    EN 10204:2004 Metallic products - Types of inspection documents
    EN 14961-3:2011 Solid biofuels - Fuel specifications and classes - Part 3: Wood briquettes for non-industrial use
    EN 12828:2012+A1:2014 Heating systems in buildings - Design for water-based heating systems
    IEC 60730-2-5:2013+AMD1:2017 CSV Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
    EN 1563:2011 Founding - Spheroidal graphite cast irons
    EN ISO 13919-2:2001/A1:2003 WELDING - ELECTRON AND LASER BEAM WELDED JOINTS - GUIDANCE ON QUALITY LEVELS FOR IMPERFECTIONS - PART 2: ALUMINIUM AND ITS WELDABLE ALLOYS
    EN ISO 12100:2010 Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010)
    EN 60335-1:2012/A13:2017 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED)
    EN 60730-2-5:2015 Automatic electrical controls - Part 2-5: Particular requirements for automatic electrical burner control systems
    EN 10216-1:2013 Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 1: Non-alloy steel tubes with specified room temperature properties
    ISO 7005-1:2011 Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems
    EN ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 4: Laser beam welding (ISO 15609-4:2009)
    ISO 4063:2009 Welding and allied processes — Nomenclature of processes and reference numbers
    EN 14961-5:2011 Solid biofuels - Fuel specifications and classes - Part 5: Firewood for non-industrial use
    EN 10226-1:2004 Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
    EN 14792:2017 Stationary source emissions - Determination of mass concentration of nitrogen oxides - Standard reference method: chemiluminescence
    IEC 61000-6-2 : 3.0:2016 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS
    ISO 857-2:2005 Welding and allied processes Vocabulary Part 2: Soldering and brazing processes and related terms
    ISO 15609-4:2009 Specification and qualification of welding procedures for metallic materials Welding procedure specification Part 4: Laser beam welding
    ISO 228-1:2000 Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
    EN 15036-1:2006 Heating boilers - Test regulations for airborne noise emissions from heat generators - Part 1: Airborne noise emissions from heat generators
    ISO 13919-2:2001 Welding Electron and laser beam welded joints Guidance on quality levels for imperfections Part 2: Aluminium and its weldable alloys
    EN 1561:2011 Founding - Grey cast irons
    EN 14961-6:2012 Solid biofuels - Fuel specifications and classes - Part 6: Non-woody pellets for non-industrial use
    EN 60730-1:2016 Automatic electrical controls - Part 1: General requirements
    IEC 60730-1:2013+AMD1:2015 CSV Automatic electrical controls - Part 1: General requirements
    EN 287-1:2011 Qualification test of welders - Fusion welding - Part 1: Steels
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective