Skip to content
Please enter a keyword to search

  • UNI EN 614-1 : 2009

    Current The latest, up-to-date edition.

    SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES

    Available format(s): 

    Language(s): 

    Published date:  14-10-2009

    Publisher:  Ente Nazionale Italiano di Unificazione (UNI)

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Foreword
    Introduction
    1 Scope
    2 Normative references
    3 Terms and definitions
    4 General principles
      4.1 General
      4.2 Accessible design for people with special requirements
      4.3 Taking account of people's body dimensions, postures,
          body movements, and physical strength
      4.4 Taking account of people's mental abilities
      4.5 Taking account of the influence of the physical work
          environment on people
    5 Incorporating ergonomic principles into the design
      process of machinery
      5.1 General
      5.2 Ergonomics tasks to be performed during the design
          process of machinery
    Annex A (informative) - Guidelines for the use of the
            3-zone rating system
          A.1 Introduction
          A.2 Definition and use of the 3-zone rating system
    Annex ZA (informative) - Relationship between this
             European Standard and the Essential Requirements
             of EU Directive 98/37/EC, amended by 98/79/EC
    Annex ZB (informative) - Relationship between this
             European Standard and the Essential Requirements
             of EU Directive 2006/42/EC
    Bibliography

    Abstract - (Show below) - (Hide below)

    This European Standard establishes the ergonomic principles to be followed during the process of design of machinery.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher Ente Nazionale Italiano di Unificazione (UNI)
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    UNI/TR 11457 : 2012 Analysis and evaluation of psychosocial risk factors and work-related stress - The contribution of ergonomic technical standards

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 1005-4:2005+A1:2008 Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery
    ISO 10075-2:1996 Ergonomic principles related to mental workload Part 2: Design principles
    EN ISO 9241-110:2006 Ergonomics of human-system interaction - Part 110: Dialogue principles (ISO 9241-110:2006)
    EN 894-3:2000+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators
    EN ISO 10075-1:2017 Ergonomic principles related to mental workload - Part 1: General issues and concepts, terms and definitions (ISO 10075-1:2017)
    ISO 5349-2:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace
    ISO 9241-110:2006 Ergonomics of human-system interaction Part 110: Dialogue principles
    EN 547-2:1996+A1:2008 Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings
    EN 981:1996+A1:2008 Safety of machinery - System of auditory and visual danger and information signals
    ISO/TR 11688-1:1995 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning
    EN 894-2:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays
    EN ISO 11064-6:2005 Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005)
    CEN/CLC Guide 6:2014 Guide for addressing accessibility in standards
    ISO 3411:2007 Earth-moving machinery Physical dimensions of operators and minimum operator space envelope
    EN ISO 3411:2007 Earth-moving machinery - Physical dimensions of operators and minimum operator space envelope (ISO 3411:2007)
    ISO 13732-1:2006 Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces
    EN 614-2:2000+A1:2008 Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks
    EN ISO 10075-3:2004 Ergonomic principles related to mental workload - Part 3: Principles and requirements concerning methods for measuring and assessing mental workload (ISO 10075-3:2004)
    EN ISO 14121-1:2007 Safety of machinery - Risk assessment - Part 1: Principles (ISO 14121-1:2007)
    EN 1837:1999+A1:2009 Safety of machinery - Integral lighting of machines
    EN ISO 10075-2:2000 Ergonomic principles related to mental workload - Part 2: Design principles (ISO 10075-2:1996)
    ISO 14738:2002 Safety of machinery — Anthropometric requirements for the design of workstations at machinery
    EN 547-1:1996+A1:2008 Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery
    EN 1005-2:2003+A1:2008 Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery
    ISO 11064-4:2013 Ergonomic design of control centres — Part 4: Layout and dimensions of workstations
    EN ISO 7731:2008 Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
    EN ISO 11064-7:2006 Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006)
    EN ISO 11688-2 : 2000 ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN
    ISO 14121-1:2007 Safety of machinery Risk assessment Part 1: Principles
    ISO 11064-6:2005 Ergonomic design of control centres — Part 6: Environmental requirements for control centres
    ISO 7731:2003 Ergonomics Danger signals for public and work areas Auditory danger signals
    EN ISO 5349-2:2001/A1:2015 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015)
    EN ISO 13732-1:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006)
    EN ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs (ISO 15537:2004)
    EN ISO 12100-1:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY
    ISO 10075-3:2004 Ergonomic principles related to mental workload Part 3: Principles and requirements concerning methods for measuring and assessing mental workload
    EN ISO 15536-1:2008 Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005)
    EN ISO 5349-1 : 2001 MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 1: GENERAL REQUIREMENTS (ISO 5349-1:2001)
    EN 842:1996+A1:2008 Safety of machinery - Visual danger signals - General requirements, design and testing
    EN ISO 11064-4:2013 Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013)
    EN 547-3:1996+A1:2008 Safety of machinery - Human body measurements - Part 3: Anthropometric data
    EN ISO 6385:2016 ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS (ISO 6385:2016)
    ISO 12100-2:2003 Safety of machinery Basic concepts, general principles for design Part 2: Technical principles
    EN ISO 12100-2:2003/A1:2009 SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES
    EN ISO 6682:2008 Earth-moving machinery - Zones of comfort and reach for controls (ISO 6682:1986, including Amd 1:1989)
    EN ISO 13732-3:2008 Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 3: Cold surfaces (ISO 13732-3:2005)
    ISO 2631-1:1997 Mechanical vibration and shock — Evaluation of human exposure to whole-body vibration — Part 1: General requirements
    ISO 12100-1:2003 Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology
    ISO 5349-1:2001 Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 1: General requirements
    EN 1005-3:2002+A1:2008 Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation
    ISO 15536-1:2005 Ergonomics Computer manikins and body templates Part 1: General requirements
    ISO 13732-3:2005 Ergonomics of the thermal environment Methods for the assessment of human responses to contact with surfaces Part 3: Cold surfaces
    ISO 15537:2004 Principles for selecting and using test persons for testing anthropometric aspects of industrial products and designs
    ISO 10075:1991 Ergonomic principles related to mental work-load General terms and definitions
    EN ISO 11688-1:2009 Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995)
    ISO/TR 11688-2:1998 Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design
    ISO 6385:2016 Ergonomics principles in the design of work systems
    EN ISO 14738:2008 Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005)
    ISO 11064-7:2006 Ergonomic design of control centres Part 7: Principles for the evaluation of control centres
    EN 894-1:1997+A1:2008 Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective