|
DIN 1961:2016-09
|
GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART B: GENERAL CONDITIONS OF CONTRACT RELATING TO THE EXECUTION OF CONSTRUCTION WORK |
|
DIN EN 13472:2013-01
|
Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
|
ISO/IEC 17065:2012
|
Conformity assessment — Requirements for bodies certifying products, processes and services |
|
EN 14304:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made flexible elastomeric foam (FEF) products - Specification |
|
ISO/IEC 17025:2005
|
General requirements for the competence of testing and calibration laboratories |
|
DIN EN 825:2013-05
|
Thermal insulating products for building applications - Determination of flatness |
|
EN 15603:2008
|
Energy performance of buildings - Overall energy use and definition of energy ratings |
|
DIN EN 823:2013-05
|
Thermal insulating products for building applications - Determination of thickness |
|
EN 14706:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature |
|
DIN EN ISO 9080:2013-02
|
PLASTICS PIPING AND DUCTING SYSTEMS - DETERMINATION OF THE LONG-TERM HYDROSTATIC STRENGTH OF THERMOPLASTICS MATERIALS IN PIPE FORM BY EXTRAPOLATION (ISO 9080:2012) |
|
EN 14309:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
|
EN 13820:2003
|
Thermal insulating materials for building applications - Determination of organic content |
|
EN 13471:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion |
|
DIN EN 13467:2016-09 (Draft)
|
THERMAL INSULATING PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF DIMENSIONS, SQUARENESS AND LINEARITY OF PREFORMED PIPE INSULATION |
|
DIN EN 45020:2007-03
|
STANDARDIZATION AND RELATED ACTIVITIES - GENERAL VOCABULARY |
|
EN ISO 8497:1996
|
Thermal insulation - Determination of steady-state thermal transmission properties of thermal insulation for circular pipes (ISO 8497:1994) |
|
DIN EN ISO 846:1997-10
|
PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS |
|
DIN EN 14308:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
|
EN ISO 4590:2016
|
Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells (ISO 4590:2016) |
|
EN 13469:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
|
AGI Q 134-1 : 1987
|
HALBHARTE SCHAUMSTOFFE ALS DAEMMSTOFFE FUER BETRIEBSTECHNISCHE ANLAGEN; POLYETHYLEN (PE)-SCHAUMSTOFF |
|
DIN 18421:2016-09
|
GERMAN CONSTRUCTION CONTRACT PROCEDURES (VOB) - PART C: GENERAL TECHNICAL SPECIFICATIONS IN CONSTRUCTION CONTRACTS (ATV) - INSULATION OF SERVICE INSTALLATIONS |
|
EN 824:2013
|
Thermal insulating products for building applications - Determination of squareness |
|
ISO 4590:2016
|
Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells |
|
DIN EN 13823:2015-02
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
|
EN 14307:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
|
DIN EN 14304:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE FLEXIBLE ELASTOMERIC FOAM (FEF) PRODUCTS - SPECIFICATION |
|
EN 14314:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
|
DIN ISO 16000-6:2012-11
|
Indoor air - Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA? sorbent, thermal desorption and gas chromatography using MS or MS-FID (ISO 16000-6:2011) |
|
EN 825:2013
|
Thermal insulating products for building applications - Determination of flatness |
|
AGI Q 138 : 1996
|
POLYURETHANE(PUR)-IN-SITU FOAM WATER/CO[2] BLOWN FOR THERMAL AND COLD INSULATIONS IN INDUSTRIAL INSTALLATIONS - PROPERTIES, FABRICATION, EXECUTION OF INSULATION SYSTEMS |
|
ISO 9080:2012
|
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation |
|
ISO 9053:1991
|
Acoustics Materials for acoustical applications Determination of airflow resistance |
|
EN 823:2013
|
Thermal insulating products for building applications - Determination of thickness |
|
DIN EN ISO 12572:2015-01 (Draft)
|
HYGROTHERMAL PERFORMANCE OF BUILDING MATERIALS AND PRODUCTS - DETERMINATION OF WATER VAPOUR TRANSMISSION PROPERTIES - CUP METHOD (ISO 12572:2016) |
|
EN 14308:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION |
|
DIN EN 824:2013-05
|
Thermal insulating products for building applications - Determination of squareness |
|
VDI 2055 Blatt 1:2008-09
|
Thermal insulation of heated and refrigerated operational installations in the industry and the building services - Calculation rules |
|
EN 13470:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation |
|
DIN EN 14707:2013-01
|
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
|
CEN/TS 15548-1:2014
|
Thermal insulation products for building equipment and industrial installations - Determination of thermal resistance by means of the guarded hot plate method - Part 1: Measurements at elevated temperatures from 100 °C to 850 °C |
|
DIN EN ISO 16000-10:2006-06
|
Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
|
EN ISO 9080:2012
|
Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) |
|
DIN EN ISO/IEC 17020:2012-07
|
CONFORMITY ASSESSMENT - REQUIREMENTS FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION (ISO/IEC 17020:2012) |
|
DIN EN 15715:2010-04
|
Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM |
|
EN 14306:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made calcium silicate (CS) products - Specification |
|
DIN EN 14307:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE EXTRUDED POLYSTYRENE FOAM (XPS) PRODUCTS - SPECIFICATION |
|
DIN 4140:2014-04
|
Insulation work on industrial installations and building equipment - Execution of thermal and cold insulations |
|
DIN EN 14314:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PHENOLIC FOAM (PF) PRODUCTS - SPECIFICATION |
|
DIN ISO 16000-3:2013-01
|
Indoor air - Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air - Active sampling method (ISO 16000-3:2011) |
|
ISO 12572:2016
|
Hygrothermal performance of building materials and products Determination of water vapour transmission properties Cup method |
|
EN 13472:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of short term water absorption by partial immersion of preformed pipe insulation |
|
EN 14313:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made polyethylene foam (PEF) products - Specification |
|
EN ISO 12572:2016
|
Hygrothermal performance of building materials and products - Determination of water vapour transmission properties - Cup method (ISO 12572:2016) |
|
EN ISO 16000-11:2006
|
Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
|
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
|
DIN EN 14706:2013-01
|
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature |
|
DIN EN 14305:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
|
ISO/IEC 17020:2012
|
Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
|
AGI Q 02 : 2001
|
INSULATION ON INDUSTRIAL INSTALLATIONS - TERMINOLOGY |
|
ISO 17455:2005
|
Plastics piping systems Multilayer pipes Determination of the oxygen permeability of the barrier pipe |
|
DIN EN 14309:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE PRODUCTS OF EXPANDED POLYSTYRENE (EPS) - SPECIFICATION |
|
AGI Q 132 : 2016
|
MINERAL WOOL INSULATION MATERIAL FOR INDUSTRIAL INSTALLATIONS |
|
DIN EN 13470:2001-12
|
Thermal insulating products for building equipment and industrial installations - Determination of the apparent density of preformed pipe insulation; English version of DIN EN 13470 |
|
EN ISO 16000-9:2006/AC:2007
|
INDOOR AIR - PART 9: DETERMINATION OF THE EMISSION OF VOLATILE ORGANIC COMPOUNDS FROM BUILDING PRODUCTS AND FURNISHING - EMISSION TEST CHAMBER METHOD |
|
EN ISO 16000-10:2006
|
Indoor air - Part 10: Determination of the emission of volatile organic compounds from building products and furnishing - Emission test cell method (ISO 16000-10:2006) |
|
EN 14707:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature for preformed pipe insulation |
|
DIN EN 13468:2001-12
|
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water-soluble chloride, fluoride, silicate, and sodium ions and pH; English version of DIN EN 13468 |
|
ISO 16000-9:2006
|
Indoor air — Part 9: Determination of the emission of volatile organic compounds from building products and furnishing — Emission test chamber method |
|
DIN EN ISO 16000-11:2006-06
|
Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006) |
|
DIN EN 14303:2016-08
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE MINERAL WOOL (MW) PRODUCTS - SPECIFICATION |
|
AGI Q 142 : 1989
|
|
|
EN ISO/IEC 17065:2012
|
Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) |
|
DIN EN 13471:2001-12
|
Thermal insulating products for building equipment and industrial installations - Determination of the coefficient of thermal expansion; GEnglish version of DIN EN 13471 |
|
DIN CEN/TS 15548-1;DIN SPEC 18548-1:2014-11
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - DETERMINATION OF THERMAL RESISTANCE BY MEANS OF THE GUARDED HOT PLATE METHOD - PART 1: MEASUREMENTS AT ELEVATED TEMPERATURES FROM 100 DEGREES C TO 850 DEGREES C |
|
EN ISO 846 : 1997
|
PLASTICS - EVALUATION OF THE ACTION OF MICROORGANISMS |
|
DIN 53428:2017-08
|
Testing of cellular materials - Determination of the resistance to liquids, vapours, gases and solid materials |
|
ISO 16000-3:2011
|
Indoor air — Part 3: Determination of formaldehyde and other carbonyl compounds in indoor air and test chamber air — Active sampling method |
|
DIN EN ISO 4590:2014-06 (Draft)
|
RIGID CELLULAR PLASTICS - DETERMINATION OF THE VOLUME PERCENTAGE OF OPEN CELLS AND OF CLOSED CELLS (ISO 4590:2016) |
|
AGI Q 143-1 : 2001
|
FLEXIBLE FOAM MATERIAL AS INSULATION FOR INDUSTRIAL INSTALLATIONS - RETICULATED ELASTOMERICS |
|
DIN EN ISO/IEC 17065:2013-01
|
CONFORMITY ASSESSMENT - REQUIREMENTS FOR BODIES CERTIFYING PRODUCTS, PROCESSES AND SERVICES (ISO/IEC 17065:2012) |
|
DIN EN 14313:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE POLYETHYLENE FOAM (PEF) PRODUCTS - SPECIFICATION |
|
ISO 16000-10:2006
|
Indoor air Part 10: Determination of the emission of volatile organic compounds from building products and furnishing Emission test cell method |
|
DIN EN 822:2013-05
|
Thermal insulating products for building applications - Determination of length and width |
|
AGI Q 137 : 2015
|
CELLULAR GLASS AS INSULATION MATERIAL FOR INDUSTRIAL INSTALLATIONS |
|
ISO 16000-11:2006
|
Indoor air — Part 11: Determination of the emission of volatile organic compounds from building products and furnishing — Sampling, storage of samples and preparation of test specimens |
|
EN 15715:2009
|
Thermal insulation products - Instructions for mounting and fixing for reaction to fire testing - Factory made products |
|
DIN EN 14306:2016-03
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CALCIUM SILICATE (CS) PRODUCTS - SPECIFICATION |
|
DIN EN 826:2013-05
|
Thermal insulating products for building applications - Determination of compression behaviour |
|
DIN EN 13469:2013-01
|
Thermal insulating products for building equipment and industrial installations - Determination of water vapour transmission properties of preformed pipe insulation |
|
ISO 16000-6:2011
|
Indoor air Part 6: Determination of volatile organic compounds in indoor and test chamber air by active sampling on Tenax TA sorbent, thermal desorption and gas chromatography using MS or MS-FID |
|
EN 13172:2012
|
Thermal insulation products - Evaluation of conformity |
|
EN 14303:2015
|
Thermal insulation products for building equipment and industrial installations - Factory made mineral wool (MW) products - Specification |
|
EN 14305:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE CELLULAR GLASS (CG) PRODUCTS - SPECIFICATION |
|
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
|
EN ISO/IEC 17020:2012
|
Conformity assessment - Requirements for the operation of various types of bodies performing inspection (ISO/IEC 17020:2012) |
|
DIN EN 13501-1:2010-01
|
FIRE CLASSIFICATION OF CONSTRUCTION PRODUCTS AND BUILDING ELEMENTS - PART 1: CLASSIFICATION USING DATA FROM REACTION TO FIRE TESTS |
|
DIN EN 13172:2012-04
|
THERMAL INSULATION PRODUCTS - EVALUATION OF CONFORMITY |
|
EN 822:2013
|
Thermal insulating products for building applications - Determination of length and width |