DIN 50021:1988-06
|
SPRAY TESTS WITH DIFFERENT SODIUM CHLORIDE SOLUTIONS |
DIN EN ISO 3231:1998-02
|
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
VDI 3823 Blatt 3:2006-11
|
Vacuum coating quality assurance - Production sequence and job steps |
DIN 5033-1:2009-05
|
COLORIMETRY - PART 1: BASIC TERMS OF COLORIMETRY |
MIL-STD-285 Base Document:1956
|
ATTENUATION MEASUREMENTS FOR ENCLOSURES, ELECTROMAGNETIC SHIELDING, FOR ELECTRONIC TEST PURPOSES, METHOD OF |
ISO 10993-4:2017
|
Biological evaluation of medical devices — Part 4: Selection of tests for interactions with blood |
DIN ISO 9022-2:2015-06
|
OPTICS AND PHOTONICS - ENVIRONMENTAL TEST METHODS - PART 2: COLD, HEAT AND HUMIDITY (ISO 9022-2:2015) |
EN ISO 15106-3:2005
|
Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method (ISO 15106-3:2003) |
EN ISO 10993-5:2009
|
Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009) |
DIN 5033-4:1992-07
|
COLORIMETRY; SPECTROPHOTOMETRIC METHOD |
ASTM D 2463 : 2015 : REDLINE
|
Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers |
EN ISO 3231:1997
|
Paints and varnishes - Determination of resistance to humid atmospheres containing sulfur dioxide (ISO 3231:1993) |
ISO 9220:1988
|
Metallic coatings Measurement of coating thickness Scanning electron microscope method |
EN ISO 2360:2017
|
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
ISO 9022-2:2015
|
Optics and photonics Environmental test methods Part 2: Cold, heat and humidity |
DIN EN ISO 3497:2001-12
|
METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS |
ASTM D 4541 : 2017 : REDLINE
|
Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers |
EN ISO 3543:2000/AC:2006
|
Metallic and non-metallic coatings - Measurement of thickness - Beta backscatter method (ISO 3543:2000/Cor.1:2003) |
ISO 9211-4:2012
|
Optics and photonics Optical coatings Part 4: Specific test methods |
ISO 3543:2000
|
Metallic and non-metallic coatings Measurement of thickness Beta backscatter method |
EN ISO 3497 : 2000
|
METALLIC COATINGS - MEASUREMENTS OF COATING THICKNESS - X-RAY SPECTROMETRIC METHODS |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
ISO 14676:1997
|
Adhesives — Evaluation of the effectiveness of surface treatment techniques for aluminium — Wet-peel test by floating-roller method |
ISO 4578:1997
|
Adhesives — Determination of peel resistance of high-strength adhesive bonds — Floating-roller method |
ISO 1463:2003
|
Metallic and oxide coatings Measurement of coating thickness Microscopical method |
ISO 14155-1:2003
|
Clinical investigation of medical devices for human subjects Part 1: General requirements |
ISO 3882:2003
|
Metallic and other inorganic coatings — Review of methods of measurement of thickness |
DIN EN ISO 2360:2016-05 (Draft)
|
NON-CONDUCTIVE COATINGS ON NON-MAGNETIC ELECTRICALLY CONDUCTIVE BASE METALS - MEASUREMENT OF COATING THICKNESS - AMPLITUDE-SENSITIVE EDDY-CURRENT METHOD (ISO 2360:2017) |
EN ISO 10993-10:2013
|
Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
EN ISO 10993-4:2017
|
Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017) |
VDI 3823 Blatt 1:2006-11
|
Vacuum coating quality assurance - Characteristics, applications and procedures |
DIN 5033-5:1981-01
|
COLORIMETRY BY VISUAL MATCHING |
DIN 53754:1977-06
|
TESTING OF PLASTICS; DETERMINATION OF ABRASION, ABRASIVE DISK METHOD |
EN ISO 9220 : 1994
|
METALLIC COATINGS - MEASUREMENT OF COATING THICKNESS - SCANNING ELECTRON MICROSCOPE METHOD |
EN ISO 3882:2003
|
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
DIN 10050-9:1973-12
|
TESTING OF BUTTER WRAPPERS; DETERMINATION OF TRANSMISSION |
DIN EN ISO 2409:2013-06
|
PAINTS AND VARNISHES - CROSS-CUT TEST (ISO 2409:2013) |
EN 1071-1 : 2003
|
ADVANCED TECHNICAL CERAMICS - METHODS OF TEST FOR CERAMIC COATINGS - PART 1: DETERMINATION OF COATING THICKNESS BY CONTACT PROBE FILOMETER |
DIN EN ISO 14155-1:2009-11
|
CLINICAL INVESTIGATION OF MEDICAL DEVICES FOR HUMAN SUBJECTS - PART 1: GENERAL REQUIREMENTS |
ISO 15106-3:2003
|
Plastics — Film and sheeting — Determination of water vapour transmission rate — Part 3: Electrolytic detection sensor method |
DIN EN ISO 10993-5:2009-10
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 5: TESTS FOR IN VITRO CYTOTOXICITY |
ISO 4624:2016
|
Paints and varnishes — Pull-off test for adhesion |
DIN 53380-1:2000-07
|
Determining the gas transmission rate of plastic film by the volumetric method |
DIN 58196-6:1995-07
|
OPTICAL COATINGS - PART 6: TESTING OF THE ADHESION WITH A TAPE (TAPE TEST) |
ISO 10993-10:2010
|
Biological evaluation of medical devices Part 10: Tests for irritation and skin sensitization |
DIN 52348:1985-02
|
TESTING OF GLASS AND PLASTICS; ABRASION TEST; SAND TRICKLING METHOD |
DIN 5033-6:1976-08
|
COLORIMETRY; TRISTIMULUS METHOD |
ISO 3497:2000
|
Metallic coatings Measurement of coating thickness X-ray spectrometric methods |
DIN EN ISO 10993-4:2016-02 (Draft)
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 4: SELECTION OF TESTS FOR INTERACTIONS WITH BLOOD (ISO 10993-4:2017) |
ASTM G 99 : 2017 : REDLINE
|
Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus |
DIN 53380-3:1998-07
|
Testing of plastics - Determination of gas transmission rate - Part 3: Oxygen-specific carrier gas method for testing of plastic films and plastics mouldings |
ISO 10993-1:2009
|
Biological evaluation of medical devices Part 1: Evaluation and testing within a risk management process |
EN ISO 4624:2016
|
Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016) |
ASTM F 390 : 2011 : REDLINE
|
Standard Test Method for Sheet Resistance of Thin Metallic Films With a Collinear Four-Probe Array |
VDI 3823 Blatt 2:2006-11
|
Vacuum coating quality assurance - Demands on plastics to be coated |
DIN 53494:1984-05
|
ELECTROPLATED COATINGS; TESTING OF ELECTROPLATED PLASTIC ARTICLES; DETERMINATION OF PEEL STRENGTH |
DIN EN ISO 10993-10:2014-10
|
Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) |
ISO 9227:2017
|
Corrosion tests in artificial atmospheres — Salt spray tests |
DIN EN ISO 15106-3:2005-05
|
PLASTICS - FILM AND SHEETING - DETERMINATION OF WATER VAPOUR TRANSMISSION RATE - PART 3: ELECTROLYTIC DETECTION SENSOR METHOD |
ISO 6719:2010
|
Anodizing of aluminium and its alloys — Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments |
DIN 50431:1988-05
|
TESTING OF SEMICONDUCTOR MATERIALS; MEASUREMENT OF THE RESISTIVITY OF SILICON OR GERMANIUM SINGLE CRYSTALS BY MEANS OF THE FOUR PROBE DIRECT CURRENT METHOD WITH CO-LINEAR ARRAY |
DIN 50933:2015-08
|
MEASUREMENT OF COATING THICKNESSES - MEASUREMENT OF THE THICKNESS OF COATINGS BY DIFFERENCE MEASUREMENT USING A STYLUS INSTRUMENT |
DIN 58196-5:1995-07
|
OPTICAL COATINGS - PART 5: TESTING OF THE ABRASION RESISTANCE WITH CLOTH |
DIN 58196-1:1996-07
|
OPTICAL COATINGS - PART 1: TESTING OF THE ADHESION BY STORING IN DEIONIZED WATER AND IN SALT WATER |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
DIN 52347:1987-12
|
TESTING OF GLASS AND PLASTICS; ABRASION TEST; METHOD USING ABRASION WHEELS AND MEASUREMENT OF SCATTERED LIGHT |
EN ISO 14155-1:2009
|
Clinical investigation of medical devices for human subjects - Part 1: General requirements (ISO 14155-1:2003) |
ISO 10110-7:2017
|
Optics and photonics — Preparation of drawings for optical elements and systems — Part 7: Surface imperfections |
EN ISO 10993-1:2009/AC:2010
|
BIOLOGICAL EVALUATION OF MEDICAL DEVICES - PART 1: EVALUATION AND TESTING WITHIN A RISK MANAGEMENT PROCESS (ISO 10993-1:2009/COR 1:2010) |
DIN ISO 10110-7:2016-05 (Draft)
|
OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES |
ISO 3231:1993
|
Paints and varnishes — Determination of resistance to humid atmospheres containing sulfur dioxide |
IEC 60068-2-30:2005
|
Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) |