ISO 1514:2016
|
Paints and varnishes — Standard panels for testing |
ISO 6507-1:2005
|
Metallic materials Vickers hardness test Part 1: Test method |
EN ISO 6508-1:2016
|
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016) |
PREN 59 : DRAFT 2014
|
GLASS REINFORCED PLASTICS - MEASUREMENT OF HARDNESS BY MEANS OF A BARCOL IMPRESSOR |
ISO 7619-1:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 1: Durometer method (Shore hardness) |
EN ISO 14577-3:2015
|
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 3: Calibration of reference blocks (ISO 14577-3:2015) |
DIN EN ISO 6507-1:2016-08 (Draft)
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 1: TEST METHOD |
EN ISO 14530-2 : 1999
|
PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 2 - PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES |
DIN EN ISO 8307:2008-03
|
FLEXIBLE CELLULAR POLYMERIC MATERIALS - DETERMINATION OF RESILIENCE BY BALL REBOUND |
ISO 7267-2:2008
|
Rubber-covered rollers Determination of apparent hardness Part 2: Shore-type durometer method |
DIN ISO 18898:2016-09 (Draft)
|
RUBBER - CALIBRATION AND VERIFICATION OF HARDNESS TESTERS (ISO 18898:2016) |
ISO 4545-2:2005
|
Metallic materials Knoop hardness test Part 2: Verification and calibration of testing machines |
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
DIN 272:1986-02
|
TESTING OF MAGNESIA FLOOR SCREEDS |
ISO 8307:2007
|
Flexible cellular polymeric materials Determination of resilience by ball rebound |
ASTM E 2546 : 2015 : REDLINE
|
Standard Practice for Instrumented Indentation Testing |
EN ISO 1043-2:2011
|
Plastics - Symbols and abbreviated terms - Part 2: Fillers and reinforcing materials (ISO 1043-2:2011) |
ISO 6508-1:2016
|
Metallic materials — Rockwell hardness test — Part 1: Test method |
DIN EN ISO 2815:2003-10
|
PAINTS AND VARNISHES - BUCHHOLZ INDENTATION TEST |
ISO 6507-2:2005
|
Metallic materials Vickers hardness test Part 2: Verification and calibration of testing machines |
DIN ISO 27588:2014-12
|
RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF DEAD-LOAD HARDNESS USING THE VERY LOW RUBBER HARDNESS (VLRH) SCALE (ISO 27588:2012) |
ISO 2039-1:2001
|
Plastics Determination of hardness Part 1: Ball indentation method |
ISO 4545-1:2005
|
Metallic materials Knoop hardness test Part 1: Test method |
EN ISO 14577-1:2015
|
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015) |
DIN EN 59:2016-06
|
GLASS REINFORCED PLASTICS - DETERMINATION OF INDENTATION HARDNESS BY MEANS OF A BARCOL HARDNESS TESTER |
DIN EN ISO 1043-1:2016-09
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMERS AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011 + AMD.1:2016) |
ISO 27588:2012
|
Rubber, vulcanized or thermoplastic Determination of dead-load hardness using the very low rubber hardness (VLRH) scale |
ISO 7267-3:2017
|
Rubber-covered rollers Determination of apparent hardness Part 3: Pusey and Jones method |
EN ISO 8307:2007
|
Flexible cellular polymeric materials - Determination of resilience by ball rebound (ISO 8307:2007) |
DIN EN ISO 6508-2:2015-06
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015); German version EN ISO 6508-2:2015 |
DIN ISO 48:2016-09
|
Rubber, vulcanized or thermoplastic - Determination of hardness (hardness between 10 IRHD and 100 IRHD) (ISO 48:2010) |
ISO 2039-2:1987
|
Plastics Determination of hardness Part 2: Rockwell hardness |
EN ISO 1514:2016
|
Paints and varnishes - Standard panels for testing (ISO 1514:2016) |
ISO 14530-3:1999
|
Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 3: Requirements for selected moulding compounds |
VDI/VDE 2616 Blatt 1:2012-08
|
Hardness testing of metallic materials |
EN ISO 14530-3 : 1999
|
PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 3: REQUIREMENTS FOR SELECTED MOULDING COMPOUNDS |
VDI 1000:2017-02
|
VDI Standardisation Work - Principles and procedures |
ISO 2435:1973
|
Nitrogen for use in aircraft |
ISO 1522:2006
|
Paints and varnishes — Pendulum damping test |
DIN EN ISO 4545-1:2015-05 (Draft)
|
METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 1: TEST METHOD |
ASTM D 531 : 2015 : REDLINE
|
Standard Test Method for Rubber Property—Pusey and Jones Indentation |
EN ISO 2039-1 : 2003
|
PLASTICS - DETERMINATION OF HARDNESS - PART 1: BALL INDENTATION METHOD (ISO 2039-1:2001) |
DIN EN ISO 1518-2:2012-01
|
PAINTS AND VARNISHES - DETERMINATION OF SCRATCH RESISTANCE - PART 2: VARIABLE-LOADING METHOD (ISO 1518-2:2011) |
EN 14598-2:2005/AC:2006
|
REINFORCED THERMOSETTING MOULDING COMPOUNDS - SPECIFICATION FOR SHEET MOULDING COMPOUND (SMC) AND BULK MOULDING COMPOUND (BMC) - PART 2: METHODS OF TEST AND GENERAL REQUIREMENTS |
ISO 14577-1:2015
|
Metallic materials Instrumented indentation test for hardness and materials parameters Part 1: Test method |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 2815:2003
|
Paints and varnishes Buchholz indentation test |
ISO 2439:2008
|
Flexible cellular polymeric materials Determination of hardness (indentation technique) |
ENV 13005 : DRAFT 1999
|
GUIDE TO THE EXPRESSION OF UNCERTAINTY IN MEASUREMENT |
DIN EN ISO 2039-2:2000-01
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2: ROCKWELL HARDNESS |
DIN EN ISO 14577-1:2015-11
|
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method (ISO 14577-1:2015); German version EN ISO 14577-1:2015 |
DIN EN ISO 6507-2:2016-08 (Draft)
|
METALLIC MATERIALS - VICKERS HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 6507-2:2005) |
ISO 7619-2:2010
|
Rubber, vulcanized or thermoplastic Determination of indentation hardness Part 2: IRHD pocket meter method |
DIN EN ISO 6508-1:2016-12
|
Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2016); German version EN ISO 6508-1:2016 |
EN ISO 2815:2003
|
Paints and varnishes - Buchholz indentation test (ISO 2815:2003) |
ISO 1518-1:2011
|
Paints and varnishes Determination of scratch resistance Part 1: Constant-loading method |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
DIN EN ISO 14577-3:2015-11
|
METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 3: CALIBRATION OF REFERENCE BLOCKS (ISO 14577-3:2015) |
ISO 14577-3:2015
|
Metallic materials Instrumented indentation test for hardness and materials parameters Part 3: Calibration of reference blocks |
DIN EN ISO 1514:2005-02
|
PAINTS AND VARNISHES - STANDARD PANELS FOR TESTING (ISO 1514:2016) |
ISO 18898:2016
|
Rubber Calibration and verification of hardness testers |
EN ISO 14530-1 : 1999
|
PLASTICS - UNSATURATED-POLYESTER POWDER MOULDING COMPOUNDS (UP-PMCS) - PART 1 - DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS |
DIN EN ISO 1522:2007-04
|
Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
DIN EN ISO 4545-2:2015-05 (Draft)
|
METALLIC MATERIALS - KNOOP HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES |
ISO 14577-2:2015
|
Metallic materials Instrumented indentation test for hardness and materials parameters Part 2: Verification and calibration of testing machines |
ASTM D 1474 : 1998
|
Standard Test Methods for Indentation Hardness of Organic Coatings |
EN ISO 2439:2008
|
Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) |
EN ISO 1518-2:2011
|
Paints and varnishes - Determination of scratch resistance - Part 2: Variable-loading method (ISO 1518-2:2011) |
DIN EN ISO 14577-2:2015-11
|
METALLIC MATERIALS - INSTRUMENTED INDENTATION TEST FOR HARDNESS AND MATERIALS PARAMETERS - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (ISO 14577-2:2015) |
ISO 48:2010
|
Rubber, vulcanized or thermoplastic Determination of hardness (hardness between 10 IRHD and 100 IRHD) |
EN ISO 14577-2:2015
|
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 2: Verification and calibration of testing machines (ISO 14577-2:2015) |
ISO 1043-2:2011
|
Plastics — Symbols and abbreviated terms — Part 2: Fillers and reinforcing materials |
ISO 1043-1:2011
|
Plastics — Symbols and abbreviated terms — Part 1: Basic polymers and their special characteristics |
EN 14598-3:2005
|
Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements |
EN ISO 2039-2 : 1999
|
PLASTICS - DETERMINATION OF HARDNESS - PART 2 - ROCKWELL HARDNESS |
ISO 14530-2:1999
|
Plastics Unsaturated-polyester powder moulding compounds (UP-PMCs) Part 2: Preparation of test specimens and determination of properties |
ISO 1518-2:2011
|
Paints and varnishes Determination of scratch resistance Part 2: Variable-loading method |
EN ISO 1522:2006
|
Paints and varnishes - Pendulum damping test (ISO 1522:2006) |
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
ISO 7267-1:2017
|
Rubber-covered rollers Determination of apparent hardness Part 1: IRHD method |
EN ISO 6508-2:2015
|
Metallic materials - Rockwell hardness test - Part 2: Verification and calibration of testing machines and indenters (ISO 6508-2:2015) |