|
DIN 43835:1971-03
|
FASTENING FOR INDICATING INSTRUMENTS; FASTENING COMPONENT, CONE RIVETS AT THE CASE, MOUNTING ARRANGEMENT |
|
DIN 43700:1982-11
|
MEASUREMENT AND CONTROL - MEASUREMENT AND CONTROL INSTRUMENTS FOR PANEL MOUNTING - NOMINAL FRONT- AND CUT-OUT-DIMENSIONS |
|
DIN 19222:1985-03
|
MEASUREMENT AND CONTROL - PROCESS CONTROL TECHNOLOGY - TERMINOLOGY |
|
VDE 0641 : AMD 4 88
|
MINIATURE CIRCUIT BREAKERS UP TO 63 A RATED CURRENT, 415 V A.C. |
|
DIN 19230 : 1969
|
D.C. SIGNAL USED IN ELECTRICAL MEASURING AND CONTROL SYSTEMS - DEFINITIONS AND REQUIREMENTS |
|
DIN 40008-5 : 1985
|
ELECTRICAL ENGINEERING; SAFETY SIGNS; MANDATORY ACTION PLATE |
|
DIN 41475:1972-09
|
WIREWOUND POTENTIOMETERS TYPE 2, SIZES 35 X 28, 45 X 36, 58 X 44 |
|
VDI 2062 Blatt 2:2007-11
|
Vibration insulation - Insulation elements |
|
DIN 40040:1987-04
|
APPLICABILITY CLASSES AND RELIABILITY FIGURES FOR COMPONENTS OF TELECOMMUNICATION AND ELECTRONICS |
|
DIN 2481:1979-06
|
THERMAL POWER GENERATING PLANTS, GRAPHICAL SYMBOLS |
|
DIN 31000 : 1979
|
GENERAL PRINCIPLES FOR THE SAFE DESIGN OF PRODUCTS |
|
VDI/VDE 2180 Blatt 5:2000-11
|
Safeguarding of industrial process plants by means of process control engineering - Using safety-related programmable electronic systems |
|
VDE 0132 : 2015
|
BRANDBEKAEMPFUNG UND TECHNISCHE HILFELEISTUNG IM BEREICH ELEKTRISCHER ANLAGEN |
|
DIN 40011:1989-08
|
ELECTRICAL ENGINEERING - EARTH, PROTECTIVE CONDUCTOR, NOISELESS EARTH - FRAME OR CHASSIS, CLASS 2 EQUIPMENT - GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT |
|
DIN 40042:1970-06
|
RELIABILITY OF ELECTRICAL EQUIPMENT, DEVICES AND SYSTEMS - DEFINITION OF TERMS |
|
DIN 40008-6:1985-02
|
ELECTRICAL ENGINEERING; SAFETY SIGNS; INFORMATION PLATES |
|
DIN 41488-1:1971-03
|
ELECTRICAL ENGINEERING - SWITCH BOARD DIMENSIONS |
|
DIN 43602:1975-07
|
DIRECTION OF MOTION AND POSITION OF OPERATING DEVICES |
|
VDE 0141 : 2000
|
EARTHING SYSTEMS FOR POWER INSTALLATIONS WITH RATED VOLTAGES ABOVE 1 KV |
|
DIN 19228:1974-07
|
GRAPHICAL SYMBOLS FOR MEASURING AND CONTROLLING - GENERAL SYMBOLS |
|
DIN 57845 : 76 AMD 1 81
|
VDE SPECIFICATION FOR THE PROTECTION OF TELECOMMUNICATION SYSTEMS AGAINST EXCESSIVE VOLTAGES |
|
VDE 0160-1 : B
|
|
|
DIN 41488-2:1972-08
|
ELECTRICAL ENGINEERING; LOW-VOLTAGE SWITCHGEAR DIMENSIONS SERIES FOR CUBICLES |
|
DIN 19231:1974-07
|
MEASUREMENT AND CONTROL - RANGE OF PRESSURE FOR PNEUMATIC TRANSMISSION OF SIGNALS |
|
DIN 4844-1:2012-06
|
GRAPHICAL SYMBOLS - SAFETY COLOURS AND SAFETY SIGNS - PART 1: OBSERVATION DISTANCES AND COLORIMETRIC AND PHOTOMETRIC REQUIREMENTS |
|
DIN 40100-7:1985-11
|
GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT IN THE ELECTROTECHNICAL FIELD; GENERAL EQUIPMENT |
|
DIN 40150:1979-10
|
CONCEPTS FOR THE ARRANGEMENT IN CONNECTION WITH FUNCTIONAL AND CONSTRUCTIONAL UNITS |
|
VDE 0165 : 1991
|
INSTALLATION OF ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
|
DIN 4551:1988-06
|
OFFICE FURNITURE; OFFICE SWIVEL CHAIRS; SAFETY REQUIREMENTS, TESTING |
|
VDI/VDE 3540 Blatt 2:1975-12
|
Reliability of measuring and control equipment; classification of climates |
|
DIN 57141 : 1976
|
SPECIFICATION FOR EARTHING IN INSTALLATIONS FOR RATED VOLTAGES ABOVE 1 KV A.C |
|
DIN 40008-1:1985-02
|
ELECTRICAL ENGINEERING - SAFETY SIGNS - SURVEY |
|
DIN 40100-1:1986-01
|
GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT IN THE ELECTROTECHNICAL FIELD; GENERAL INFORMATION |
|
VDI/VDE 2180 Blatt 1:1998-12
|
Safeguarding of industrial process plants by means of process control engineering - Introduction, terms, comments |
|
VDE 0160 : 1998-04
|
ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS |
|
DIN 19235:1985-03
|
MEASUREMENT AND CONTROL - SIGNALLING OF OPERATING CONDITIONS |
|
VDE 0170 : 1961
|
|
|
VDE 0660 : 1982
|
|
|
DIN 33400:1983-10
|
ERGONOMIC PRINCIPLES IN THE DESIGN OF WORK SYSTEMS; TERMINOLOGY AND GENERAL GUIDING PRINCIPLES |
|
DIN 43834:1982-11
|
MEASUREMENT AND CONTROL; FASTENING FOR MEASURING AND CONTROL INSTRUMENTS FOR PANEL MOUNTING; FASTENING COMPONENT; FASTENING HOLES IN THE INSTRUMENT |
|
DIN ISO 1219:1978-08
|
FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS |
|
VDI/VDE 2180 Blatt 4:1998-12
|
Safeguarding of industrial process plants by means of process control engineering - Calculating methods for reliability characteristics of safety instrumented systems |
|
VDE 0470 : 1961
|
RULES FOR TESTING EQUIPMENT AND TESTING METHODS |
|
DIN 40100-2:1987-08
|
GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT IN THE ELECTROTECHNICAL FIELD; OPERATING, SWITCH POSITION, FUNCTION |
|
DIN 30600:1985-11
|
GRAPHICAL SYMBOLS - REGISTRATION, DESIGNATION |
|
DIN 4552 : 1975
|
OFFICE FURNITURE; REVOLVING CHAIR WITH NON-ADJUSTABLE BACK IN THE HEIGHT WITH OR WITHOUT ARM RESTS, ADJUSTABLE IN HEIGHT |
|
VDI/VDE 2180 Blatt 3:1998-12
|
Safeguarding of industrial process plants by means of process and control engineering - Building and installation requirements for functional safety of process control systems under emergency conditions |
|
DIN 41746-1:1972-11
|
STABILIZED POWER SUPPLIES WITH D.C. OUTPUT - RECOMMENDATIONS FOR DATA SHEETS |
|
DIN 19277:2015-12
|
CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - THERMOGRAPHY - GENERAL PROCEDURES (ISO 18434-1:2008, MODIFIED) |
|
VDI/VDE 2180 Blatt 6:2013-06
|
Safeguarding of industrial process plants by means of process control engineering (PCE) - Application of functional safety in the context of explosion protection |
|
DIN EN 50014 : 2000
|
ELECTRICAL APPARATUS FOR POTENTIALLY EXPLOSIVE ATMOSPHERES - GENERAL REQUIREMENTS |
|
VDI/VDE 3551:1976-10
|
Recommendations for noise-immunity of signal transmission when applying processcomputers |
|
VDI 2078:2015-06
|
Calculation of thermal loads and room temperatures (design cooling load and annual simulation) |
|
DIN 40016 : 1978
|
FRAME OF CHASSIS; GRAPHICAL SYMBOLS ON ELECTRICAL EQUIPMENT, SIGNS AND PLATES |
|
VDE 0675 : LATEST
|
|
|
VDE 0171 : 1986
|
SPECIFICATION FOR FIREDAMP-PROOF AND EXPLOSION-PROOF ELECTRICAL EQUIPMENT |
|
VDE 0845 : 76 AMD 1 81
|
VDE SPECIFICATION FOR THE PROTECTION OF TELECOMMUNICATION SYSTEMS AGAINST EXCESSIVE VOLTAGES |
|
DIN 40008-2:1988-04
|
ELECTRICAL ENGINEERING - SAFETY SIGNS - INTERDICTION PLATES AND SUPPLEMENTARY PLATE |
|
DIN 50014:1985-07
|
CLIMATES AND THEIR TECHNICAL APPLICATION; STANDARD ATMOSPHERES |
|
DIN 40053-1:1980-07
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES; TEST TO CHECK PROTECTION AGAINST INGRESS OF WATER, DRIPPING APPARATUS |
|
DIN 19226:1968-05
|
CONTROL ENGINEERING - DEFINITIONS AND TERMS |
|
VDI/VDE 3515:2007-12
|
Multi-contact plug system for electrodes used in process analysis technology |
|
DIN 18000:1984-05
|
MODULAR COORDINATION IN BUILDING |
|
VDE 0100 : 1973
|
REGULATIONS FOR THE SETTING-UP OF POWER PLANTS WITH RATED VOLTAGES UP TO 1000 V |
|
DIN 33403 : LATEST
|
|
|
DIN 31051-1 : LATEST
|
|
|
DIN 40008-3:1985-02
|
ELECTRICAL ENGINEERING; SAFETY SIGNS; WARNING PLATES AND SUPPLEMENTARY PLATE |
|
DIN 4844-2:2012-12
|
Graphical symbols - Safety colours and safety signs - Part 2: Registered safety signs |
|
DIN 33401:1977-07
|
CONTROLS; TERMS AND DEFINITIONS SUITABILITY, DIRECTIONS OF DESIGN |
|
DIN 33410:1981-12
|
SPEECH COMMUNICATION IN WORK PLACES UNDER THE INFLUENCE OF DISTURBING NOISE, TERMS AND DEFINITIONS, CONNECTIONS |
|
DIN 41746-2:1975-02
|
STABILIZED POWER SUPPLIES WITH AC OUTPUT; RECOMMENDATIONS FOR DATA SHEETS |
|
DIN 19236:1977-01
|
TERMINOLOGY FOR OPTIMIZATION |
|
VDE 1000:2017-04
|
GENERAL PRINCIPLES FOR THE SAFE DESIGN OF PRODUCTS |