BS ISO 15380:2016
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Lubricants, industrial oils and related products (class L). Family H (Hydraulic systems). Specifications for hydraulic fluids in categories HETG, HEPG, HEES and HEPR
Hardcopy , PDF
02-11-2023
English
30-11-2016
Committee |
MCE/18
|
DevelopmentNote |
Supersedes 98/712006 DC. (05/2002) Supersedes 15/30310648 DC. (12/2016)
|
DocumentType |
Standard
|
Pages |
30
|
PublisherName |
British Standards Institution
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
This International Standard specifies the requirements for environmentally acceptable hydraulic fluids and is intended for hydraulic systems, particularly hydraulic fluid power systems. The purpose of this International Standard is to provide guidance for suppliers and users of environmentally acceptable hydraulic fluids and for the direction of original equipment manufacturers of hydraulic systems. This International Standard stipulates the requirements for environmentally acceptable hydraulic fluids at the time of delivery. Classification of fluids used in hydraulic application is defined in ISO6743‑4 . This International Standard encompasses only four of the categories of environmentally acceptable fluids covered by ISO6743‑4 . These categories are HETG, HEPG, HEES and HEPR. The minimum content of base fluid for each category shall not be less than 70%( m/ m).
Standards | Relationship |
ISO 15380:2016 | Identical |
BS PAS 600(2013) : 2013 | BIO-BASED PRODUCTS - GUIDE TO STANDARDS AND CLAIMS |
ISO 3016:1994 | Petroleum products Determination of pour point |
ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
ISO 14593:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Method by analysis of inorganic carbon in sealed vessels (CO2 headspace test) |
ISO 20844:2015 | Petroleum and related products — Determination of the shear stability of polymer-containing oils using a diesel injector nozzle |
ISO 12937:2000 | Petroleum products — Determination of water — Coulometric Karl Fischer titration method |
ISO 9439:1999 | Water quality Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium Carbon dioxide evolution test |
ISO 3170:2004 | Petroleum liquids — Manual sampling |
ISO 4263-3:2015 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids using the TOST test Part 3: Anhydrous procedure for synthetic hydraulic fluids |
ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
ISO 14635-1:2000 | Gears — FZG test procedures — Part 1: FZG test method A/8,3/90 for relative scuffing load-carrying capacity of oils |
ISO 12922:2012 | Lubricants, industrial oils and related products (class L) Family H (Hydraulic systems) Specifications for hydraulic fluids in categories HFAE, HFAS, HFB, HFC, HFDR and HFDU |
ISO 7120:1987 | Petroleum products and lubricants — Petroleum oils and other fluids — Determination of rust-preventing characteristics in the presence of water |
ISO 6614:1994 | Petroleum products — Determination of water separability of petroleum oils and synthetic fluids |
ISO 6341:2012 | Water quality — Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) — Acute toxicity test |
ISO 6247:1998 | Petroleum products — Determination of foaming characteristics of lubricating oils |
ISO 2160:1998 | Petroleum products Corrosiveness to copper Copper strip test |
ISO 9120:1997 | Petroleum and related products — Determination of air-release properties of steam turbine and other oils — Impinger method |
ISO 4263-1:2003 | Petroleum and related products Determination of the ageing behaviour of inhibited oils and fluids TOST test Part 1: Procedure for mineral oils |
ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
ISO 12185:1996 | Crude petroleum and petroleum products — Determination of density — Oscillating U-tube method |
ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
ISO 20763:2004 | Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method |
DIN 51554-3:1978-09 | TESTING OF MINERAL OILS; TEST OF SUSCEPTIBILITY TO AGEING ACCORDING TO BAADER; TESTING AT 95 DEGREE C |
ISO 6245:2001 | Petroleum products — Determination of ash |
ISO 6296:2000 | Petroleum products Determination of water Potentiometric Karl Fischer titration method |
ISO 4259:2006 | Petroleum products Determination and application of precision data in relation to methods of test |
ISO 8192:2007 | Water quality Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation |
ISO 11158:2009 | Lubricants, industrial oils and related products (class L) — Family H (hydraulic systems) — Specifications for categories HH, HL, HM, HV and HG |
ISO 10634:1995 | Water quality Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium |
ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
ISO 6619:1988 | Petroleum products and lubricants — Neutralization number — Potentiometric titration method |
ISO 7346-2:1996 | Water quality Determination of the acute lethal toxicity of substances to a freshwater fish [Brachydanio rerio Hamilton-Buchanan (Teleostei, Cyprinidae)] Part 2: Semi-static method |
ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.