Technical Committee on CANDU Nuclear Power Plant Systems
and Components
Subcommittee on Material Standards for Reactor Components
for CANDU Nuclear Power Plants
Preface
N285.6.1-05, Pressure tubes for use in CANDU fuel channels
1 Scope
2 Reference publications
3 Definitions
4 General requirements
5 Ingot and ingot composition requirements
6 Extrusion requirements
7 Tube requirements
N285.6.2-05, Seamless zirconium alloy tubing for reactivity
control units
1 Scope
2 Reference publications
3 Manufacturing requirements
4 Composition requirements
5 Inspections
N285.6.3-05, Annealed seamless zirconium alloy tubing for
liquid injection shutdown system (LISS) nozzles
1 Scope
2 Reference publications
3 General requirements
4 Composition requirements
5 Inspections (LISS) nozzles)
N285.6.4-05, Thin-walled, large-diameter zirconium alloy
tubing
1 Scope
2 Reference publications
3 General requirements
4 Composition requirements
5 Processing requirements
5.1 General
5.2 Seam-welded processing
5.2.1 Material for seam-welded processing
5.2.2 Processing of strip material
5.3 Seamless processing
6 Final surface condition of the seam-welded and seamless
tubes
6.1 Calandria tube surfaces
6.2 Reactivity tubes
7 Inspections
N285.6.6-05, Non-destructive examination criteria for
zirconium alloys
1 Scope
2 Reference publications
3 NDE personnel qualification
3.1 General
3.2 Certification
3.3 Eye test requirements
3.4 Documentation control
4 Visual inspection standards
4.1 Standard V-1 (for small tubes)
4.1.1 Application
4.1.2 Requirements
4.1.3 Acceptance criteria
4.2 Standard V-2 (for large-diameter tubes)
4.2.1 Application
4.2.2 Requirements
4.2.3 Acceptance criteria
4.3 Standard V-3
4.4 Standard V-4 (for pressure tubes)
4.4.1 Application
4.4.2 Requirements
4.4.3 Acceptance criteria
5 Radiographic standards
5.1 Standard R-1 (for seam welds in large-diameter tubes)
5.2 Acceptance standards
6 Liquid-penetrant standards
6.1 Standard LP-1 (for seam welds in large-diameter tubes)
6.1.1 Application
6.1.2 Requirements
6.1.3 Acceptance standards
6.2 Standard LP-2
6.3 Standard LP-3 (for seamless tubes for liquid injection
shutdown system (LISS) nozzles)
6.3.1 Application
6.3.2 Requirements
6.3.3 Acceptance standards
7 Ultrasonic standards
7.1 Standard UT-1 (for seamless tubing)
7.1.1 Application
7.1.2 Requirements
7.1.3 Acceptance criteria
7.2 Standard UT-2
7.3 Standard UT-3
7.4 Standard UT-4
7.5 Standard UT-5 (for pressure tubes)
7.5.1 Application
7.5.2 Requirements
7.5.3 Acceptance criteria
7.6 Standard UT-6 (for large-diameter tubes)
7.6.1 Application
7.6.2 Requirements
7.6.3 Acceptance criteria
8 Eddy current standards - Standard EC-1 (for pressure
tubes)
8.1 Application
8.2 Requirements
8.3 Acceptance criteria
N285.6.7-05, Zirconium alloy design data
1 Scope
2 Reference publications
3 General
Tables
N285.6.8-05, Martensitic stainless steel for fuel-channel
end fittings
1 Scope
2 Reference publications
3 Definitions
4 Manufacturing requirements
4.1 Melting process
4.2 Forging process
4.3 Heat treatment
5 Chemical composition
6 Mechanical properties
6.1 Prolongations for tests
6.2 Tension tests
6.2.1 Tensile properties
6.2.2 Method for tensile testing
6.2.3 Number of tests
6.2.4 Test location and orientation
6.3 Impact test
6.3.1 Impact properties
6.3.2 Number of tests, location, and orientation
6.3.3 Method
6.3.4 Test temperature
6.4 Re-test
7 Macroetch test
7.1 Material homogeneity
7.2 Samples
7.3 Examination procedure
7.4 Acceptance criteria
8 Ultrasonic examination
9 Quality of work
9.1 Quality of blanks
9.2 Repair by welding
10 Certification
11 Product marking
Annexes
A (normative) - Design data recommended for end fitting
material
Tables
N285.6.9-05, Materials for supports for pressure-retaining
items
1 Scope
2 Reference publications
3 General requirements
4 Materials
5 Welding
6 Examination
7 Certification
Tables
N285.6.10-05, Nickel-based alloy wire for fuel-channel
spacers
1 Scope
2 Reference publications
3 Wire requirements
N285.6.11-05, Zirconium alloy wire
1 Scope
2 Reference publications
3 Material requirements