• EN 60598-1:2015/A1:2018

    Current The latest, up-to-date edition.

    LUMINAIRES - PART 1: GENERAL REQUIREMENTS AND TESTS

    Available format(s): 

    Language(s): 

    Published date:  23-02-2018

    Publisher:  European Committee for Standards - Electrical

    Pure ENs are not available for sale, please purchase a suitable national adoption

    Sorry this product is not available in your region.

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    SECTION 0: GENERAL INTRODUCTION
    SECTION 1: TERMS AND DEFINITIONS
    SECTION 2: CLASSIFICATION OF LUMINAIRES
    SECTION 3: MARKING
    SECTION 4: CONSTRUCTION
    SECTION 5: EXTERNAL AND INTERNAL WIRING
    SECTION 7: PROVISION FOR EARTHING
    SECTION 8: PROTECTION AGAINST ELECTRIC SHOCK
    SECTION 9: RESISTANCE TO DUST, SOLID OBJECTS AND MOISTURE
    SECTION 10: INSULATION RESISTANCE AND ELECTRIC STRENGTH,
                TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT
    SECTION 11: CREEPAGE DISTANCES AND CLEARANCES
    SECTION 12: ENDURANCE TEST AND THERMAL TEST
    SECTION 13: RESISTANCE TO HEAT, FIRE AND TRACKING
    SECTION 14: SCREW TERMINALS
    SECTION 15: SCREWLESS TERMINALS AND ELECTRICAL CONNECTIONS
    Annex A (normative) - Test to establish whether a
            conductive part may cause an electric shock
    Annex B (normative) - Test lamps
    Annex C (normative) - Abnormal circuit conditions
    Annex D (normative) - Draught-proof enclosure
    Annex E (normative) - Determination of winding temperature
            rises by the increase-in-resistance method
    Annex F (normative) - Test for resistance to stress
            corrosion of copper and copper alloys
    Annex G (normative) - Measurement of touch current and
            protective conductor current
    Annex H (Void)
    Annex I (Void)
    Annex J (informative) - Explanation of IP numbers for
            degrees of protection
    Annex K (informative) - Temperature measurement
    Annex L (informative) - Guide to good practice in luminaire
            design
    Annex M (normative) - Determination of creepage distances
            and clearances
    Annex N (informative) - Explanation of marking for
            luminaires that are not suitable for mounting on
            normally flammable surfaces and covering with
            insulation materials
    Annex O (Void)
    Annex P (normative) - Absorption requirements for the
            protective shield to be fitted to luminaires
            designed for metal halide lamps which emit a high
            level of UV radiation
    Annex Q (informative) - Conformity testing during
            manufacture
    Annex R (normative) - Schedule of amended clauses and
            subclauses containing more serious/critical
            requirements which call for products to be retested
    Annex S (normative) - Requirements for the identification
            of a family or range of luminaires for type testing
    Annex T (Void)
    Annex U (informative) - Creepage and clearances distances
            for luminaires with a higher degree of availability
            (impulse withstand category III)
    Annex V (normative) - Additional test requirements for
            terminal blocks with integrated screwless earthing
            contact for direct connection to the luminaire
            housing or to parts of the body
    Annex W (normative) - Alternative thermal test for
            thermoplastic luminaires
    Annex X (normative)
    Bibliography
    Annex ZA (normative) - Normative references to international
             publications with their corresponding European
             publications
    Annex ZZ (informative) - Relationship between this European
             standard and the safety objectives of Directive
             2014/35/EU [2014 OJ L96] aimed to be covered
    Annex ZB (normative) - Special national conditions
    Annex ZC (informative) - A-deviations

    General Product Information - (Show below) - (Hide below)

    Committee TC 34
    Document Type Standard
    Publisher European Committee for Standards - Electrical
    Status Current
    Superseded By

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60950-1:2005+AMD1:2009+AMD2:2013 CSV Information technology equipment - Safety - Part 1: General requirements
    IEC 60112:2003+AMD1:2009 CSV METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    HD 60364-7-702 : 2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND FOUNTAINS
    EN 60634 : 1995 HEAT TEST SOURCE (H.T.S.) LAMPS FOR CARRYING OUT HEATING TESTS ON LUMINAIRES
    IEC 60811-3-1 : 1.0 COMMON TEST METHODS FOR INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - METHODS SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING
    IEC 60432-1:1999+AMD1:2005+AMD2:2011 CSV Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes
    EN 60068-2-75:2014 ENVIRONMENTAL TESTING - PART 2-75: TESTS - TEST EH: HAMMER TESTS (IEC 60068-2-75:2014)
    IEC 60238:2016+AMD1:2017 CSV Edison screw lampholders
    IEC 60061-3:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges
    IEC 60228:2004 Conductors of insulated cables
    EN 62031:2008/A2:2015 LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS (IEC 62031:2008/A2:2014)
    IEC 60664-4:2005 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress
    EN 60998-2-2:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-2: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREWLESS-TYPE CLAMPING UNITS
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    IEC 60662:2011 High-pressure sodium vapour lamps - Performance specifications
    EN 60238 : 2004 AMD 2 2011 EDISON SCREW LAMPHOLDERS (IEC 60238:2004/A2:2011)
    IEC 60682:1980 STANDARD METHOD OF MEASURING THE PINCH TEMPERATURE OF QUARTZ-TUNGSTEN-HALOGEN LAMPS
    EN 61347-2-9:2013 LAMP CONTROLGEAR - PART 2-9: PARTICULAR REQUIREMENTS FOR ELECTROMAGNETIC CONTROLGEAR FOR DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) (IEC 61347-2-9:2012)
    EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
    IEC 60050-195:1998 International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock
    IEC 60634:1993 HEAT TEST SOURCE (H.T.S.) LAMPS FOR CARRYING OUT HEATING TESTS ON LUMINAIRES
    EN 60085:2008 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
    IEC 60364-4-41:2005+AMD1:2017 CSV Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock
    EN 61558-1:2005/A1:2009 SAFETY OF POWER TRANSFORMERS, POWER SUPPLIES, REACTORS AND SIMILAR PRODUCTS - PART 1: GENERAL REQUIREMENTS AND TESTS
    IEC 61347-2-9:2012 Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps)
    IEC TR 60083:2015 Plugs and socket-outlets for domestic and similar general use standardized in member countries of IEC
    IEC TR 62471-2:2009 Photobiological safety of lamps and lamp systems - Part 2: Guidance on manufacturing requirements relating to non-laser optical radiation safety
    IEC 60364-5-51:2005 Electrical installations of buildings - Part 5-51: Selection and erection of electrical equipment - Common rules
    IEC 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
    EN 60598-2-5:2015 LUMINAIRES - PART 2-5: PARTICULAR REQUIREMENTS - FLOODLIGHTS (IEC 60598-2-5:2015)
    HD 60364-4-41:2017/A11:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 4-41: PROTECTION FOR SAFETY - PROTECTION AGAINST ELECTRIC SHOCK
    EN 60950-1:2006/A2:2013 INFORMATION TECHNOLOGY EQUIPMENT - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60950-1:2005/A2:2013, MODIFIED)
    EN 61199:2011/A2:2015 SINGLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61199:2011/A2:2014)
    EN 60432-2:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 2: TUNGSTEN HALOGEN LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES
    EN 60400:2017 LAMPHOLDERS FOR TUBULAR FLUORESCENT LAMPS AND STARTERHOLDERS (IEC 60400:2017)
    EN 60929:2011/A1:2016 AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
    EN 60998-2-1:2004 CONNECTING DEVICES FOR LOW-VOLTAGE CIRCUITS FOR HOUSEHOLD AND SIMILAR PURPOSES - PART 2-1: PARTICULAR REQUIREMENTS FOR CONNECTING DEVICES AS SEPARATE ENTITIES WITH SCREW-TYPE CLAMPING UNITS
    IEC 60061-2:2005 CSV Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders
    IEC 60695-2-11:2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT)
    IEC 60570:2003+AMD1:2017 CSV Electrical supply track systems for luminaires
    EN 60228:2005 COR 2005 CONDUCTORS OF INSULATED CABLES
    IEC 60929:2011+AMD1:2015 CSV AC and/or DC-supplied electronic control gear for tubularfluorescent lamps - Performance requirements
    IEC 60598-2-5:2015 LUMINAIRES - PART 2-5: PARTICULAR REQUIREMENTS - FLOODLIGHTS
    IEC 60400:2017 Lampholders for tubular fluorescent lamps and starterholders
    EN 61558-2-5:2010 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-5: PARTICULAR REQUIREMENTS AND TESTS FOR TRANSFORMER FOR SHAVERS, POWER SUPPLY UNITS FOR SHAVERS AND SHAVER SUPPLY UNITS
    IEC 60598-2-6:1994 LUMINAIRES - PARTICULAR REQUIREMENTS - LUMINAIRES WITH BUILT IN TRANSFORMERS FOR FILAMENT LAMPS
    ISO 75-2:2013 Plastics Determination of temperature of deflection under load Part 2: Plastics and ebonite
    EN 60811-3-1 : 95 AMD 2 2001 INSULATING AND SHEATHING MATERIALS OF ELECTRIC CABLES - COMMON TEST METHODS - METHODS SPECIFIC TO PVC COMPOUNDS - PRESSURE TEST AT HIGH TEMPERATURE - TESTS FOR RESISTANCE TO CRACKING
    HD 60364-5-51:2009/A12:2017 ELECTRICAL INSTALLATIONS OF BUILDINGS - PART 5-51: SELECTION AND ERECTION OF ELECTRICAL EQUIPMENT - COMMON RULES
    EN 60112 : 2003 AMD 1 2009 METHOD FOR THE DETERMINATION OF THE PROOF AND THE COMPARATIVE TRACKING INDICES OF SOLID INSULATING MATERIALS
    EN 60923:2005/A1:2006 AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS
    IEC 60085:2007 ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION
    EN ISO 75-2:2013 PLASTICS - DETERMINATION OF TEMPERATURE OF DEFLECTION UNDER LOAD - PART 2: PLASTICS AND EBONITE (ISO 75-2:2013)
    IEC 61199:2011+AMD1:2012+AMD2:2014 CSV Single-capped fluorescent lamps - Safety specifications
    IEC 61167:2015 Metal halide lamps - Performance specification
    IEC 60925:1989+AMD1:1996+AMD2:2001 CSV SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS
    HD 60364-7-701:2007/A12:2017 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-701: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - LOCATIONS CONTAINING A BATH OR SHOWER
    IEC 61346-1:1996 Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 1: Basic rules
    EN 60921:2004/A1:2006 BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS
    EN 60357:2003/A11:2016 TUNGSTEN HALOGEN LAMPS (NON-VEHICLE) - PERFORMANCE SPECIFICATIONS
    IEC 60364-7-702:2010 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-702: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - SWIMMING POOLS AND FOUNTAINS
    IEC 60921:2004+AMD1:2006 CSV Ballasts for tubular fluorescent lamps - Performance requirements
    EN 61346-1 : 1996 INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS - STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS - PART 1: BASIC RULES
    IEC 61558-1:2017 Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests
    IEC 60598-2-3:2002+AMD1:2011 CSV Luminaires - Part 2-3: Particular requirements - Luminaires for road and street lighting
    IEC 60901:1996+AMD1:1997+AMD2:2000 CSV Single-capped fluorescent lamps - Performance specifications
    IEC 60364-7-701:2006 LOW-VOLTAGE ELECTRICAL INSTALLATIONS - PART 7-701: REQUIREMENTS FOR SPECIAL INSTALLATIONS OR LOCATIONS - LOCATIONS CONTAINING A BATH OR SHOWER
    IEC 60998-2-2:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-2: Particular requirements for connecting devices as separate entities with screwless-type clamping units
    EN 60598-2-6:1994/A1:1997 LUMINAIRES - PART 2: PARTICULAR REQUIREMENTS - SECTION 6: LIMINAIRES WITH BUILT-IN TRANSFORMERS OR CONVERTERS FOR FILAMENT LAMPS
    EN 60360:1998 STANDARD METHOD OF MEASUREMENT OF LAMP CAP TEMPERATURE RISE
    IEC 62035:2014+AMD1:2016 CSV Discharge lamps (excluding fluorescent lamps) - Safety specifications
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 61058-1:2016 Switches for appliances - Part 1: General requirements
    EN 60695-2-10:2013 FIRE HAZARD TESTING - PART 2-10: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE APPARATUS AND COMMON TEST PROCEDURE (IEC 60695-2-10:2013)
    EN 62035:2014 DISCHARGE LAMPS (EXCLUDING FLUORESCENT LAMPS) - SAFETY SPECIFICATIONS (IEC 62035:2014, MODIFIED)
    IEC 60989:1991 Separating transformers, autotransformers, variable transformersand reactors.
    EN 61032 : 1998 PROTECTION OF PERSONS AND EQUIPMENT BY ENCLOSURES - PROBES FOR VERIFICATION (IEC 61032:1997)
    EN 60664-1:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
    IEC 80416-1:2008 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: CREATION OF GRAPHICAL SYMBOLS FOR REGISTRATION
    IEC 62471:2006 Photobiological safety of lamps and lamp systems
    HD 193 : 200S2 VOLTAGE BANDS FOR ELECTRICAL INSTALLATIONS OF BUILDINGS
    EN 60155:1995/A2:2007 GLOW-STARTERS FOR FLUORESCENT LAMPS
    EN 61210:2010 Connecting devices - Flat quick-connect terminations for electrical copper conductors - Safety requirements
    IEC 61535:2009+AMD1:2012 CSV Installation couplers intended for permanent connection in fixedinstallations
    IEC 60068-2-75:2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests
    EN 61058-1:2002/A2:2008 SWITCHES FOR APPLIANCES - PART 1: GENERAL REQUIREMENTS
    EN 61184:2017 Bayonet lampholders
    IEC 60664-3:2016 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION
    EN 60901:1996/A6:2017 SINGLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60901:1996/A6:2014, MODIFIED)
    EN 61140:2016 PROTECTION AGAINST ELECTRIC SHOCK - COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT (IEC 61140:2016)
    EN 61558-2-6:2009 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND SIMILAR PRODUCTS FOR SUPPLY VOLTAGES UP TO 1100 V - PART 2-6: PARTICULAR REQUIREMENTS AND TESTS FOR SAFETY ISOLATING TRANSFORMERS AND POWER SUPPLY UNITS INCORPORATING SAFETY ISOLATING TRANSFORMERS
    IEC 61558-2-5:2010 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF - PART 2-5: PARTICULAR REQUIREMENTS AND TEST FOR TRANSFORMER FOR SHAVERS, POWER SUPPLY UNITS FOR SHAVERS AND SHAVER SUPPLY UNITS
    IEC 60695-10-2:2014 FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD
    EN 61535:2009/A1:2013 INSTALLATION COUPLERS INTENDED FOR PERMANENT CONNECTION IN FIXED INSTALLATIONS (IEC 61535:2009/A1:2012)
    IEC TR 60972:1989 CLASSIFICATION AND INTERPRETATION OF NEW LIGHTING PRODUCTS
    IEC 60432-2:1999+AMD1:2005+AMD2:2012 CSV Incandescent lamps - Safety specifications - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes
    EN 60664-4:2006/corrigendum:2006 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 4: CONSIDERATION OF HIGH-FREQUENCY VOLTAGE STRESS
    EN 60662:2012 HIGH-PRESSURE SODIUM VAPOUR LAMPS - PERFORMANCE SPECIFICATIONS (IEC 60662:2011, MODIFIED)
    ISO 4046-4:2002 Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    EN 60432-3:2013 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 3: TUNGSTEN-HALOGEN LAMPS (NON-VEHICLE) (IEC 60432-3:2012)
    AS 3771-1998 Road lighting luminaires with integral control gear
    IEC 61140:2016 Protection against electric shock - Common aspects for installation and equipment
    EN 60598-2-3:2003/A1:2011 LUMINAIRES - PART 2-3: PARTICULAR REQUIREMENTS - LUMINAIRES FOR ROAD AND STREET LIGHTING (IEC 60598-2-3:2002/A1:2011)
    EN 80416-1:2009 BASIC PRINCIPLES FOR GRAPHICAL SYMBOLS FOR USE ON EQUIPMENT - PART 1: CREATION OF GRAPHICAL SYMBOLS FOR REGISTRATION
    IEC 60155:1993 GLOW STARTERS FOR FLUORESCENT LAMPS
    EN 60432-1:2000/A2:2012 INCANDESCENT LAMPS - SAFETY SPECIFICATIONS - PART 1 - TUNGSTEN FILAMENT LAMPS FOR DOMESTIC AND SIMILAR GENERAL LIGHTING PURPOSES (IEC 60432-1:1999/A2:2011)
    EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE (IEC 60695-11-5:2016)
    IEC 61032:1997 Protection of persons and equipment by enclosures - Probes for verification
    IEC 60923:2005+AMD1:2006 CSV Auxiliaries for lamps - Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements
    IEC 60432-3:2012 Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle)
    IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    IEC 60695-2-10:2013 Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common test procedure
    EN 62471 : 2008 PHOTOBIOLOGICAL SAFETY OF LAMPS AND LAMP SYSTEMS
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    EN 60664-3:2017 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 3: USE OF COATING, POTTING OR MOULDING FOR PROTECTION AGAINST POLLUTION (IEC 60664-3:2016)
    IEC 62031:2008+AMD1:2012+AMD2:2014 CSV LED MODULES FOR GENERAL LIGHTING - SAFETY SPECIFICATIONS
    IEC 60998-2-1:2002 Connecting devices for low-voltage circuits for household and similar purposes - Part 2-1: Particular requirements for connecting devices as separate entities with screw-type clamping units
    IEC 60598-2-4:2017 LUMINAIRES - PART 2-4: PARTICULAR REQUIREMENTS - PORTABLE GENERAL PURPOSE LUMINAIRES
    IEC 61184:2017 Bayonet lampholders
    EN 61195:1999/A2:2015 DOUBLE-CAPPED FLUORESCENT LAMPS - SAFETY SPECIFICATIONS (IEC 61195:1999/A2:2014)
    IEC 60990:2016 Methods of measurement of touch current and protective conductor current
    ISO 16893-1:2008 Wood-based panels Particleboard Part 1: Classifications
    IEC 60360:1998 Standard method of measurement of lamp cap temperature rise
    EN 60682:1993/A2:1997 METHOD OF MEASURING THE PINCH TEMPERATURE OF QUARTZ GLASS LAMPS
    EN 60695-2-11:2014 FIRE HAZARD TESTING - PART 2-11: GLOWING/HOT-WIRE BASED TEST METHODS - GLOW-WIRE FLAMMABILITY TEST METHOD FOR END-PRODUCTS (GWEPT) (IEC 60695-2-11:2014)
    EN 60925:1991/A2:2001 SPECIFICATION FOR PERFORMANCE REQUIREMENTS FOR D.C. SUPPLIED ELECTRONIC BALLASTS FOR TUBULAR FLUORESCENT LAMPS
    IEC 61195:1999+AMD1:2012+AMD2:2014 CSV Double-capped fluorescent lamps - Safety specifications
    EN 60990:2016 METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT (IEC 60990:2016)
    ISO 1891:2009 Fasteners Terminology
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective