I.S. EN 14041:2018
Current
The latest, up-to-date edition.
RESILIENT, TEXTILE, LAMINATE AND MODULAR MULTILAYER FLOOR COVERINGS - ESSENTIAL CHARACTERISTICS
Hardcopy , PDF
English
01-01-2018
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
National Foreword
European foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Essential characteristics
5 Assessment and verification of constancy of performance (AVCP)
6 Marking and labelling
Annex A (informative) - Product standards for resilient,
textile, laminate and modular multilayer floor coverings
Annex B (normative) - Determination of content of
pentachlorophenol (PCP) in resilient and textile floor coverings
Annex C (informative) - Guidance on the reduction of slip hazards
Annex D (normative) - Product parameters for defining product families
Annex E (normative) - Determination of content of Polycyclic
Aromatic Hydrocarbons (PAH)
Annex F (normative) - Determination of content of phthalates
Annex G (normative) - Information to be provided in the
Supplier declaration on raw materials or constituent
products
Annex H (normative) - Content of Azocolourants - Restricted
Aromatic Amines
Annex I (normative) - List of pictograms used for an
alternative way of expressing the performance
of certain characteristics
Annex ZA (informative) - Relationship of this European
Standard with Regulation (EU) No.305/2011
Bibliography
Defines the essential characteristics for the following types of floor coverings: - resilient floor coverings, excluding loose-laid mats; - textile floor coverings, excluding loose-laid (barrier) mats, runners and rugs; - laminate floor coverings; and - modular multilayer floor coverings.
| DevelopmentNote |
2004 COR 2006 issued on 14-05-2011. (05/2011)
|
| DocumentType |
Standard
|
| Pages |
74
|
| PublisherName |
National Standards Authority of Ireland
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| UNI EN 14041 : 2004 | Identical |
| UNE-EN 14041:2005 | Identical |
| NBN EN 14041 : 2004 COR 2006 | Identical |
| SN EN 14041 : 2005 | Identical |
| BS EN 14041:2004 | Identical |
| EN 14041:2018 | Identical |
| DIN EN 14041:2016-07 (Draft) | Identical |
| EN 12667:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance |
| EN ISO 18219:2015 | Leather - Determination of chlorinated hydrocarbons in leather - Chromatographic method for short-chain chlorinated paraffins (SCCP) (ISO 18219:2015) |
| ISO 10595:2010 | Resilient floor coverings Semi-flexible/vinylcomposition (VCT) poly(vinyl chloride) floor tiles Specification |
| ISO 1957:2000 | Machine-made textile floor coverings Selection and cutting of specimens for physical tests |
| ISO 1766:1999 | Textile floor coverings Determination of thickness of pile above the substrate |
| EN 1815:1997 | Resilient and textile floor coverings - Assessment of static electrical propensity |
| EN 652:2011 | Resilient floor coverings - Polyvinyl chloride floor coverings with cork-based backing - Specification |
| EN 62321-1:2013 | Determination of certain substances in electrotechnical products - Part 1: Introduction and overview |
| ISO/TS 16186:2012 | Footwear Critical substances potentially present in footwear and footwear components Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials |
| EN 651:2011 | Resilient floor coverings - Polyvinyl chloride floor coverings with foam layer - Specification |
| EN 12199:2010 | Resilient floor coverings - Specifications for homogeneous and heterogeneous relief rubber floor coverings |
| EN 13329:2016+A1:2017 | Laminate floor coverings - Elements with a surface layer based on aminoplastic thermosetting resins - Specifications, requirements and test methods |
| EN ISO 24011:2012 | Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009) |
| ISO 10965:2011 | Textile floor coverings Determination of electrical resistance |
| EN 12673:1998 | Water quality - Gas chromatographic determination of some selected chlorophenols in water |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| EN 717-1:2004 | Wood-based panels - Determination of formaldehyde release - Part 1: Formaldehyde emission by the chamber method |
| ISO 11925-2:2010 | Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test |
| EN 1817:2010 | Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings |
| EN 13553:2017 | Resilient floor coverings - Polyvinyl chloride floor coverings for use in special wet areas - Specification |
| EN 1816:2010 | Resilient floor coverings - Specification for homogeneous and heterogeneous smooth rubber floor coverings with foam backing |
| EN 312:2010 | Particleboards - Specifications |
| ISO 26986:2010 | Resilient floor coverings Expanded (cushioned) poly(vinyl chloride) floor covering Specification |
| EN ISO 10581:2013 | Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011) |
| EN 13238:2010 | Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates |
| EN 16516:2017 | Construction products: Assessment of release of dangerous substances - Determination of emissions into indoor air |
| ISO 8302:1991 | Thermal insulation — Determination of steady-state thermal resistance and related properties — Guarded hot plate apparatus |
| ISO/TS 16179:2012 | Footwear — Critical substances potentially present in footwear and footwear components — Determination of organotin compounds in footwear materials |
| EN 687:2011 | Resilient floor coverings - Specification for plain and decorative linoleum on a corkment backing |
| CEN ISO/TS 16179:2012 | Footwear - Critical substances potentially present in footwear and footwear components - Determination of organotin compounds in footwear materials (ISO/TS 16179:2012) |
| EN ISO 9239-1:2010 | Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) |
| EN 13893:2002 | Resilient, laminate and textile floor coverings - Measurement of dynamic coefficient of friction on dry floor surfaces |
| ISO 390:1993 | Products in fibre-reinforced cement Sampling and inspection |
| EN 12664:2001 | Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and moist products of medium and low thermal resistance |
| CEN/TS 15968:2010 | Determination of extractable perfluorooctanesulphonate (PFOS) in coated and impregnated solid articles, liquids and fire fighting foams - Method for sampling, extraction and analysis by LC-qMS or LC-tandem/MS |
| ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
| ISO 2424:2007 | Textile floor coverings — Vocabulary |
| CEN ISO/TS 16186:2012 | Footwear - Critical substances potentially present in footwear and footwear components - Test method to quantitatively determine dimethyl fumarate (DMFU) in footwear materials (ISO/TS 16186:2012) |
| ISO 18219:2015 | Leather Determination of chlorinated hydrocarbons in leather Chromatographic method for short-chain chlorinated paraffins (SCCP) |
| ISO 139:2005 | Textiles — Standard atmospheres for conditioning and testing |
| EN 12466:1998 | Resilient floor coverings - Vocabulary |
| CEN/TS 15447:2006 | Mounting and fixing in reaction to fire tests under the Construction Products Directive |
| CEN/TR 14823:2003 | Durability of wood and wood-based products - Quantitative determination of pentachlorophenol in wood - Gas chromatographic method |
| ISO 11379:2009 | Textile floor coverings Laboratory cleaning procedure using spray extraction |
| ISO 9239-1:2010 | Reaction to fire tests for floorings Part 1: Determination of the burning behaviour using a radiant heat source |
| EN 1122:2001 | Plastics - Determination of cadmium - Wet decomposition method |
| ISO 14362-1:2017 | Textiles — Methods for determination of certain aromatic amines derived from azo colorants — Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres |
| EN 1081:1998 | Resilient floor coverings - Determination of the electrical resistance |
| ISO 10581:2011 | Resilient floor coverings Homogeneous poly(vinyl chloride) floor covering Specifications |
| EN ISO 14362-1:2017 | Textiles - Methods for determination of certain aromatic amines derived from azo colorants - Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres (ISO 14362-1:2017) |
| ISO 10582:2010 | Resilient floor coverings Heterogeneous poly(vinyl chloride) floor coverings Specification |
| ISO 24011:2009 | Resilient floor coverings Specification for plain and decorative linoleum |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.