I.S. EN ISO 13998:2003
Current
The latest, up-to-date edition.
PROTECTIVE CLOTHING - APRONS, TROUSERS AND VESTS PROTECTING AGAINST CUTS AND STABS BY HAND KNIVES
Hardcopy , PDF
English
01-01-2003
For Harmonized Standards, check the EU site to confirm that the Standard is cited in the Official Journal.
Only cited Standards give presumption of conformance to New Approach Directives/Regulations.
Dates of withdrawal of national standards are available from NSAI.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Performance level
5 Requirements
5.1 Innocuousness
5.2 Sizing
5.3 Minimum dimensions of zones of protection
5.4 Support and restraint of aprons, divided
aprons and protective trousers
5.5 Ergonomic requirements
5.6 Mass
5.7 Penetration resistance
5.8 Cut resistance of performance level 1 garments
5.9 Tensile strength of metal rings
5.10 Water permeability (optional)
6 Test apparatus
6.1 Accuracy of test instruments
6.2 Gauges for interstices
6.3 Knife impact penetration testing apparatus
6.4 Tensile strength testing apparatus
6.5 Cut resistance apparatus
6.6 Water permeability
7 Test procedures
7.1 General
7.2 Test specimens
7.3 Innocuousness
7.4 Sizing
7.5 Measurement of the dimensions of zones of
protection
7.6 Support and restraint testing of aprons
and protective vests
7.7 Ergonomic testing
7.8 Determination of mass
7.9 Penetration testing
7.10 Cut resistance testing
7.11 Tensile strength testing
7.12 Water permeability measurement
8 Marking
9 Information supplied by the manufacturer
10 Pictograms
Annex A (informative) Advice on risk assessment, and
the selection and fitting of different sizes
of apron and other garments
A.1 Scope
A.2 Content
A.3 Risk assessment
A.4 Knife profiles
A.5 PPE performance levels and garment types
A.6 Apron sizing and fit
A.6.1 General
A.6.2 Minimum body coverage by aprons
A.6.3 Straps for aprons
A.6.4 Performance Level 2 garments with
extended areas of protection
Annex B (informative) Testing for imperfect welds
B.1 Scope
B.2 Content
B.3 Background of the test
B.4 Principle of the test
B.5 Types of tensile strength testing devices
Annex ZA (informative) Clauses of this European Standard
addressing essential requirements or other
provisions of EU Directives
Bibliography
Specifies protective aprons trousers and vests for use with hand knives, and to other garments providing similar protection to parts of the body in accidents.
DevelopmentNote |
Supersedes I.S. EN 412. (03/2006)
|
DocumentType |
Standard
|
Pages |
75
|
PublisherName |
National Standards Authority of Ireland
|
Status |
Current
|
Supersedes |
Standards | Relationship |
EN ISO 13998:2003 | Identical |
UNE-EN ISO 13998:2004 | Identical |
UNI EN ISO 13998 : 2004 | Identical |
NEN EN ISO 13998 : 2003 | Identical |
NF EN ISO 13998 : 2003 | Identical |
NBN EN ISO 13998 : 2003 | Identical |
ISO 13998:2003 | Identical |
SN EN ISO 13998 : 2003 | Identical |
BS EN ISO 13998:2003 | Identical |
NS EN ISO 13998 : 1ED 2003 | Identical |
DIN EN ISO 13998:2003-05 | Identical |
EN 20811:1992 | Textiles - Determination of resistance to water penetration - Hydrostatic pressure test |
EN 1082-1:1996 | Protective clothing - Gloves and arm guards protecting against cuts and stabs by hand knives - Part 1: Chain mail gloves and arm guards |
EN ISO 13997:1999 | Protective clothing - Mechanical properties - Determination of resistance to cutting by sharp objects (ISO 13997:1999) |
EN 340:2003 | Protective clothing - General requirements |
ISO 7000:2014 | Graphical symbols for use on equipment Registered symbols |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.