|
MIL-DTL-8815-31 Base Document:2009
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F |
|
SAE AS 8791 : 2014
|
HYDRAULIC AND PNEUMATIC RETAINERS (BACK-UP RINGS), POLYTETRAFLUOROETHYLENE (PTFE) RESIN |
|
SAE J 2321 1 : 2013
|
DISPOSABLE HYDRAULIC FILTER ELEMENT - 115 L/MIN FLOW, 1.0 MPA COLLAPSE PRESSURE, FILTRATION RATIO = 75 AT 6 AND 10 [MU]M |
|
SAE AIR 6082 : 2016
|
CALCULATIONS TO DETERMINE DIMENSIONS FOR BACKUP RINGS TO AS5781, AS5782, AS5860, AS5861 |
|
SAE ARP 1802 : 2014
|
SELECTION AND APPLICATION OF POLYTETRAFLUOROETHYLENE (PTFE AND TFE) BACKUP RINGS FOR HYDRAULIC AND PNEUMATIC FLUID POWER APPLICATIONS |
|
MIL-HDBK-2193 Base Document:1994
|
HYDRAULIC SYSTEM COMPONENTS, SHIP |
|
SAE AS 83461/1 : 2016
|
M83461 O-RING MOLDED FROM AMS-P-83461 RUBBER |
|
SAE AIR 4543/1A : 2017
|
AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED |
|
MIL-PRF-5503 Revision G:2013
|
ACTUATORS: AERONAUTICAL LINEAR UTILITY, HYDRAULIC, GENERAL SPECIFICATION FOR |
|
MIL-DTL-8815-32 Base Document:2010
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT |
|
SAE AS 83248/1 : 2016
|
O-RING MOLDED FROM AMS7276 MATERIAL |
|
SAE J 24714 : 2001
|
Fluid Systems—Connector Tubes—General Specification and Part Standard |
|
SAE AS 5466 : 2012
|
AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - QUANTITY MEASURING |
|
SAE AIR1243D:2013(S2018)
|
ANTI BLOW-BY DESIGN PRACTICE FOR CAP SEALS |
|
SAE ARP 4945 : 2013
|
AEROSPACE-SOLENOID VALVE, HYDRAULIC, THREE WAY, TWO POSITION, DIRECT ACTING |
|
SAE AS 83248/2 : 2016
|
O-RING MOLDED FROM AMS7259 MATERIAL |
|
SAE AMS 3678 : 2016
|
POLYTETRAFLUOROETHYLENE (PTFE) MOLDINGS AND EXTRUSIONS, UNFILLED, PIGMENTED, AND FILLED |
|
SAE AS 28772 : 2015
|
'D' RING SEAL FOR SHOCK STRUTS MOLDED FROM AMS-P-25732 MATERIAL |
|
SAE AS 5782 : 2015
|
RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SOLID, UN-CUT, FOR USE IN AS4716 GLANDS |
|
SAE J 1231 2 : *DUPLICATE RECORD*
|
**DUPLICATE RECORD** |
|
SAE ARP 1281 : 2002
|
ACTUATORS: AIRCRAFT FLIGHT CONTROLS, POWER OPERATED, HYDRAULIC, GENERAL SPECIFICATION FOR |
|
SAE AS 83485 : 2016
|
O-RING MOLDED FROM AMS7287 MATERIAL |
|
SAE J 2321 2 : 2013
|
DISPOSABLE HYDRAULIC FILTER ELEMENT - 190 L/MIN FLOW, 21 MPA COLLAPSE PRESSURE, FILTRATION RATIO = 75 AT 7 [MU]M |
|
SAE AS 6235 : 2015
|
FACE SEAL GLAND DESIGN, STATIC, O-RING AND OTHER SEALS FOR AEROSPACE HYDRAULIC AND PNEUMATIC APPLICATIONS |
|
SAE ARP 5796 : 2013
|
FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT |
|
16/30338730 DC : 0
|
BS ISO 18387 - AEROSPACE - LINEAR HYDRAULIC UTILITY ACTUATOR - GENERAL SPECIFICATIONS |
|
SAE AS 5781 : 2015
|
RETAINERS (BACKUP RINGS), HYDRAULIC AND PNEUMATIC, POLYTETRAFLUOROETHYLENE RESIN, SINGLE TURN, SCARF-CUT, FOR USE IN AS4716 GLANDS |
|
SAE AS 4052 : 2015
|
GLAND DESIGN: SCRAPER, LANDING GEAR, INSTALLATION |
|
SAE AS 5798 : 2013
|
AEROSPACE SIZE STANDARD FOR OVERSIZE O-RINGS |
|
SAE ARP 1833 : 2015
|
SEALING TECHNIQUES FOR MISSILE APPLICATIONS |
|
SAE ARP 4763 : 2017
|
AEROSPACE - GENERAL REQUIREMENTS FOR HYDRAULIC RELIEF VALVES |
|
SAE AS 4088 : 2018
|
AEROSPACE ROD SCRAPER GLAND DESIGN STANDARD |
|
MIL-DTL-24630 Revision A:2014
|
VALVES, CHECK, IN-LINE, FOR HYDRAULIC FLUID AND LUBRICATING OIL FLUID, GENERAL SPECIFICATION FOR |
|
SAE ARP 1311 : 2015
|
LANDING GEAR STRUCTURES AND MECHANISMS |
|
SAE ARP 5555 : 2016
|
RECOMMENDATIONS FOR INSTALLATION OF SEALS IN STANDARD GLANDS |
|
MIL-STD-2193 Revision C:2012
|
Ship Hydraulic System Components |
|
MIL-DTL-8815-33 Base Document:2011
|
FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU) |
|
SAE AS 5467 : 2016
|
GENERAL REQUIREMENTS FOR HYDRAULIC FUSE - FLOW RATE |
|
SAE ARP 4943 : 2008
|
GROUND SUPPORT EQUIPMENT HYDRAULIC SYSTEMS, DESIGN AND INSTALLATION, RECOMMENDED PRACTICES FOR |
|
SAE AS 4941 : 2015
|
AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
|
SAE AIR 4543 : 2017
|
AEROSPACE HYDRAULICS AND ACTUATION LESSONS LEARNED |
|
SAE AS 29513 : 2016
|
PACKING, PREFORMED, HYDROCARBON FUEL RESISTANT, 'O' RING |
|
SAE AS 5857 : 2010
|
GLAND DESIGN, O-RING AND OTHER ELASTOMERIC SEALS, STATIC APPLICATIONS |