ISO 9229:2007
|
Thermal insulation Vocabulary
|
EN 520:2004+A1:2009
|
Gypsum plasterboards - Definitions, requirements and test methods
|
EN 12667:2001
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of high and medium thermal resistance
|
ISO 13787:2003
|
Thermal insulation products for building equipment and industrial installations Determination of declared thermal conductivity
|
EN 14706:2012
|
Thermal insulating products for building equipment and industrial installations - Determination of maximum service temperature
|
EN 13468:2001
|
Thermal insulating products for building equipment and industrial installations - Determination of trace quantities of water soluble chloride, fluoride, silicate, sodium ions and pH
|
EN 1607:2013
|
Thermal insulating products for building applications - Determination of tensile strength perpendicular to faces
|
EN 12939:2000
|
Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Thick products of high and medium thermal resistance
|
ISO 1716:2010
|
Reaction to fire tests for products Determination of the gross heat of combustion (calorific value)
|
EN ISO 9229:2007
|
Thermal insulation - Vocabulary (ISO 9229:2007)
|
ISO 4590:2016
|
Rigid cellular plastics Determination of the volume percentage of open cells and of closed cells
|
ISO 11925-2:2010
|
Reaction to fire tests Ignitability of products subjected to direct impingement of flame Part 2: Single-flame source test
|
EN ISO 1182:2010
|
Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010)
|
EN 823:2013
|
Thermal insulating products for building applications - Determination of thickness
|
EN ISO 13787:2003
|
Thermal insulation products for building equipment and industrial installations - Determination of declared thermal conductivity (ISO 13787:2003)
|
EN 14308:2015
|
THERMAL INSULATION PRODUCTS FOR BUILDING EQUIPMENT AND INDUSTRIAL INSTALLATIONS - FACTORY MADE RIGID POLYURETHANE FOAM (PUR) AND POLYISOCYANURATE FOAM (PIR) PRODUCTS - SPECIFICATION
|
EN 312:2010
|
Particleboards - Specifications
|
EN 13238:2010
|
Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates
|
ISO 1182:2010
|
Reaction to fire tests for products Non-combustibility test
|
EN 13823:2010+A1:2014
|
REACTION TO FIRE TESTS FOR BUILDING PRODUCTS - BUILDING PRODUCTS EXCLUDING FLOORINGS EXPOSED TO THE THERMAL ATTACK BY A SINGLE BURNING ITEM
|
EN 1602:2013
|
Thermal insulating products for building applications - Determination of the apparent density
|
EN 1604:2013
|
Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions
|
EN 14320-2:2013
|
Thermal insulating products for building equipment and industrial installations - In-situ formed sprayed rigid polyurethane (PUR) and polyisocyanurate foam (PIR) products - Part 2: Specification for the installed insulation products
|
EN 1609:2013
|
Thermal insulating products for building applications - Determination of short term water absorption by partial immersion
|
EN 826:2013
|
Thermal insulating products for building applications - Determination of compression behaviour
|
EN ISO 1716:2010
|
Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO 1716:2010)
|
EN ISO 11925-2:2010/AC:2011
|
REACTION TO FIRE TESTS - IGNITABILITY OF PRODUCTS SUBJECTED TO DIRECT IMPINGEMENT OF FLAME - PART 2: SINGLE-FLAME SOURCE TEST
|
EN 12086:2013
|
Thermal insulating products for building applications - Determination of water vapour transmission properties
|
EN 13172:2012
|
Thermal insulation products - Evaluation of conformity
|
EN 508-1:2014
|
Roofing and cladding products from metal sheet - Specification for self-supporting of steel, aluminium or stainless steel sheet - Part 1: Steel
|