UNE-EN 1610:2016
Current
The latest, up-to-date edition.
Construction and testing of drains and sewers
Hardcopy , PDF
Spanish, Castilian, English
09-03-2016
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
1 Scope
2 Normative references
3 Definitions
4 General
4.1 Concepts
4.2 Safeguarding design assumptions
5 Construction components and materials
5.1 General
5.2 Construction components
5.3 Materials used for embedment
5.4 Materials used for main backfill
6 Excavation
6.1 Trenches
6.2 Trench width
6.3 Trench stability
6.4 Trench bottom
6.5 Dewatering
7 Embedment and support
7.1 General
7.2 Bedding construction types
7.3 Special methods of bedding or support
8 Installation
8.1 Setting-out
8.2 Delivery, handling and transportation on site
8.3 Storage
8.4 Lifting of components
8.5 Laying
8.6 Special constructions
8.7 Supporting and anchoring
8.8 Manholes and inspection chambers
9 Connections to pipes and manholes
9.1 General
9.2 Connection by junctions
9.3 Connection by connecting fittings
9.4 Connection by saddle fittings
9.5 Connection by welding
9.6 Connection to manholes and inspection chambers
10 Testing during construction
11 Backfilling
11.1 Compaction
11.2 Placement of the embedment
11.3 Placement of the main backfill
11.4 Removal of sheeting
11.5 Surface reinstatement
12 Final inspection and/or testing of pipelines and
manholes after backfilling
12.1 Visual inspection
12.2 Leaktightness
12.3 Embedment and main backfill
13 Procedures and requirements for testing gravity
pipelines
13.1 General
13.2 Testing with air (method L)
13.3 Testing with water (method W)
13.4 Testing individual joints
14 Testing of pressure pipelines
15 Qualifications
Annexes
A (informative) Dewatering
B (informative) Additional information to 5.3.3.1 on
material properties
C (informative) Abstract from Council Directive of
17 September 1990 on the procurement procedures of entities
operating in the water, energy, transport and
telecommunication sectors
Applies to construction and testing of drains and sewers usually buried in the ground and operating under gravity.
| Committee |
CTN 149
|
| DevelopmentNote |
Supersedes UNE 88212 (1985) (07/2003)
|
| DocumentType |
Standard
|
| Pages |
42
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NF EN 1610 : 1997 | Identical |
| NBN EN 1610 : 2015 | Identical |
| NEN EN 1610 : 2015 | Identical |
| NS EN 1610 : 1997 | Identical |
| I.S. EN 1610:2015 | Identical |
| SN EN 1610 : 2015 | Identical |
| UNI EN 1610 : 1999 | Identical |
| BS EN 1610:2015 | Identical |
| EN 1610:2015 | Identical |
| UNE 127916:2017 | Concrete pipes and fittings, unreinforced, steel fibre and reinforced. National complement to the UNE-EN 1916:2008 standard. |
| UNE 53994:2012 | Plastics. Thermoplastics and thermoplastic reinforced with steel strip pipes and fittings for drainage for drainage in building and civil engineering and agricultural drainage |
| EN 1295-1:1997 | Structural design of buried pipelines under various conditions of loading - Part 1: General requirements |
| EN 805:2000 | Water supply - Requirements for systems and components outside buildings |
| EN 16323:2014 | Glossary of wastewater engineering terms |
| EN 476:2011 | General requirements for components used in drains and sewers |
| EN 12889:2000 | Trenchless construction and testing of drains and sewers |
| EN 752:2017 | Drain and sewer systems outside buildings - Sewer system management |
| EN 13508-2:2003+A1:2011 | Investigation and assessment of drain and sewer systems outside buildings - Part 2: Visual inspection coding system |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.