UNE-EN ISO 11140-1:2015
Current
The latest, up-to-date edition.
Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014)
Hardcopy , PDF
Spanish, Castilian, English
20-05-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Classification
5 General requirements
6 Performance requirements
7 Test methods
8 Additional requirements for process (Class 1) indicators
9 Additional requirements for single variable (Class 3)
indicators
10 Additional requirements for multi-variable (Class 4)
indicators
11 Additional requirements for steam integrating (Class 5)
indicators
12 Additional requirements for dry heat integrating (Class 5)
indicators
13 Additional requirements for ethylene oxide integrating
(Class 5) indicators
14 Additional requirements for emulating (Class 6)
indicators
Annex A (informative) Method for demonstrating shelf life
of the product
Annex B (informative) Examples of testing indicators
Annex C (informative) Rationale for the requirements for
integrating indicators and the link
to the requirements for biological
indicators (BIs) specified in ISO 11138
and microbial inactivation
Annex D (informative) Rationale for the liquid-phase test method
for steam-formaldehyde indicators
Annex E (informative) Relationship of indicator components
Bibliography
Annex ZA (informative) Relationship between this European
Standard and the Essential
Requirements of EU Directive
93/42 EEC
Annex ZA (normative) Normative references to international
publications with their relevant
European publications
Provides general requirements and test methods for indicators that show exposure to sterilization processes by means of physical and/or chemical change of substances, and which are used to monitor the attainment of one or more of the variables required for a sterilization process.
| Committee |
CTN 111
|
| DevelopmentNote |
Supersedes UNE EN 867-1 & UNE EN 867-2. (03/2006)
|
| DocumentType |
Standard
|
| Pages |
48
|
| PublisherName |
Asociacion Espanola de Normalizacion
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| ISO 11140-1:2014 | Identical |
| NF EN ISO 11140-1 : 2015 | Identical |
| NBN EN ISO 11140-1 : 2014 | Identical |
| NEN EN ISO 11140-1 : 2014 | Identical |
| NS EN ISO 11140-1 : 2014 | Identical |
| I.S. EN ISO 11140-1:2014 | Identical |
| SN EN ISO 11140-1:2015 | Identical |
| UNI EN ISO 11140-1 : 2009 | Identical |
| BS EN ISO 11140-1:2014 | Identical |
| EN ISO 11140-1:2014 | Identical |
| DIN EN ISO 11140-1:2015-03 | Identical |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 11137-1:2006 | Sterilization of health care products Radiation Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 17665-3:2013 | Sterilization of health care products — Moist heat — Part 3: Guidance on the designation of a medical device to a product family and processing category for steam sterilization |
| EN 550 : 1994 | STERILIZATION OF MEDICAL DEVICES - VALIDATION AND ROUTINE CONTROL OF ETHYLENE OXIDE STERILIZATION |
| ISO/IEC 17050-1:2004 | Conformity assessment Supplier's declaration of conformity Part 1: General requirements |
| ISO 11607-2:2006 | Packaging for terminally sterilized medical devices Part 2: Validation requirements for forming, sealing and assembly processes |
| ISO 11138-3:2017 | Sterilization of health care products — Biological indicators — Part 3: Biological indicators for moist heat sterilization processes |
| ISO 15882:2008 | Sterilization of health care products — Chemical indicators — Guidance for selection, use and interpretation of results |
| ISO 11135:2014 | Sterilization of health-care products — Ethylene oxide — Requirements for the development, validation and routine control of a sterilization process for medical devices |
| EN 285:2015 | Sterilization - Steam sterilizers - Large sterilizers |
| ISO/TS 17665-2:2009 | Sterilization of health care products — Moist heat — Part 2: Guidance on the application of ISO 17665-1 |
| ISO 13485:2016 | Medical devices Quality management systems Requirements for regulatory purposes |
| ISO 11140-3:2007 | Sterilization of health care products — Chemical indicators — Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test |
| EN 14180:2014 | Sterilizers for medical purposes - Low temperature steam and formaldehyde sterilizers - Requirements and testing |
| ISO 11138-2:2017 | Sterilization of health care products — Biological indicators — Part 2: Biological indicators for ethylene oxide sterilization processes |
| ISO 18472:2006 | Sterilization of health care products Biological and chemical indicators Test equipment |
| ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| EN 552:1994/A2:2000 | STERILIZATION OF MEDICAL DEVICES - VALIDATION AND ROUTINE CONTROL OF STERILIZATION BY IRRADIATION |
| ISO 8601:2004 | Data elements and interchange formats Information interchange Representation of dates and times |
| ISO 20857:2010 | Sterilization of health care products Dry heat Requirements for the development, validation and routine control of a sterilization process for medical devices |
| ISO/TS 11139:2006 | Sterilization of health care products Vocabulary |
| ISO 11137-3:2017 | Sterilization of health care products — Radiation — Part 3: Guidance on dosimetric aspects of development, validation and routine control |
| ISO 11137-2:2013 | Sterilization of health care products — Radiation — Part 2: Establishing the sterilization dose |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 11140-5:2007 | Sterilization of health care products — Chemical indicators — Part 5: Class 2 indicators for Bowie and Dick-type air removal tests |
| ISO 11138-1:2017 | Sterilization of health care products — Biological indicators — Part 1: General requirements |
| ISO 11607-1:2006 | Packaging for terminally sterilized medical devices Part 1: Requirements for materials, sterile barrier systems and packaging systems |
| ISO 14161:2009 | Sterilization of health care products Biological indicators Guidance for the selection, use and interpretation of results |
| ISO 11137:1995 | Sterilization of health care products Requirements for validation and routine control Radiation sterilization |
| ISO 11138-4:2017 | Sterilization of health care products — Biological indicators — Part 4: Biological indicators for dry heat sterilization processes |
| ISO 11138-5:2017 | Sterilization of health care products — Biological indicators — Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes |
| EN 1422:2014 | Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods |
| EN 13060:2014 | Small steam sterilizers |
| ISO 17665-1:2006 | Sterilization of health care products — Moist heat — Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.